This works around the inability to build iOS apps for a "generic"
simulator by explicitly setting the Xcode build setting
ENABLE_ONLY_ACTIVE_RESOURCES to NO in order to ensure that all variants
of assets in an asset catalog are built when targeting iOS simulator
devices. Otherwise, we will simply build for whatever the first
simulator in the list happens to be. If the application is then deployed
to a different simulator, some of the assets needed for that device
variant may be missing.
This "helps" QTCREATORBUG-19447 but is not a workaround since this fix
is necessary for command line builds anyways, even though it's unlikely
to crop up in practice there, since one would have to manually deploy
the built application bundle to the simulator using simctl rather than
going through Xcode (which would rebuild for the appropriate device).
Change-Id: Ia41c48dcc715fe79a2c50db66a0ca7a1fea159c2
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
... instead of only toolchain.prf.
the license check could go haywire, and everything else that file does
is meaningless in configure context anyway.
Task-number: QTBUG-63452
Change-Id: I5e31c87fe717fda40978c0317556070637e537e2
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
otherwise test de-duplication between modules doesn't work.
Change-Id: I2c6222d853108df223758aa8907dc8d004efd87f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
especially during debugging, it is often necessary to re-run only one
(or a few) tests, where -recheck-all would be wasteful.
Task-number: QTBUG-64059
Change-Id: I9410894dec4289ff832d7f75e04f9b60fe76c57c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
it could be somewhat surprising that specifying variant-specific libs
would not clear the common libs, so do that. of course, the default
for the common libs could theoretically contain common deps of the
variant-specific libs, in which case clearing them would be surprising
in turn - luckily, we have no such case.
Change-Id: Ifca08b9e1949c6a0cefed6931ade4021927d7c90
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... and not only when the source explicitly specifies build variants.
Change-Id: Iac6c8fda8f431d5fb50fada8338d1b660ab040d7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
unlike for the other fields, we forgot to eval() the values of the
build-specific library values, leading to over-quoting of values which
require any quoting at all.
amends c0cc50520.
Task-number: QTBUG-62521
Change-Id: I4dfce31040dd09248d3f9dd4294f7fb147c13bdd
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
qtConfLibrary_inline() used to set $${1}.builds.$${b}.libs, while
everything else assumed no such .libs suffix. fix the former.
amends 9172143f52.
Task-number: QTBUG-61431
Started-by: Konstantin Ritt <ritt.ks@gmail.com>
Change-Id: I0bd81591c46266d81baa9c12315411183bbc7a63
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
SYSTEM is used for system() calls, while SHELL is used in the target
Makefiles.
Task-number: QTBUG-62985
Change-Id: Ia75d3939c59c98699359421166433e8b4a6ee35e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We obviously should check the variable we're about to get the data from.
Amends 1216f596bd.
Change-Id: Ibe87138b9c9aa99837b4fbf3769cd26ca1aaacb9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
If MOC_INCLUDEPATH exceeds a certain limit, its content is written into
a file named mocinclude.opt, which is then passed to moc as a response
file. That moc parameter was not properly quoted, and the moc call
failed for paths containing spaces.
Task-number: QTBUG-63197
Change-Id: Ib0542d80ce1bab239e0e6b6e24fadd11007b1846
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Enabled via configure --ccache, or CONFIG += ccache in 3rd party
projects.
Ensures that we use the right sloppiness and other ccache options
during compilation.
Task-number: QTBUG-31034
Change-Id: I696b3d3f0398873a29b93d1bc2b4d4e06ef23dc9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
clang+libc++ is the only supported way by Google nowadays.
libstdc++ is too old and already fails to build some C++11 apps
e.g. missing std::to_string().
android-g++ mkspec still uses libstdc++ and g++.
Use -isystem to include system headers instead of QMAKE_INCDIR_POST (-I).
Task-number: QTBUG-60455
Change-Id: Iba8b04594c2e5e2832e6cf480e4e52ff31ad4106
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
So far this only covered the QT_xxx_LIB define, but not any other defines
a module might export (such as QT_NO_QML_DEBUGGER which hasn't been ported
to the new configure system yet).
Change-Id: I8aae2354fed77a6f0e527ad8d63d25654bb067d0
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
doing so is somewhat likely to cause follow-up issues, as it turns the
source tree into a build tree as a side effect.
note that this change does not affect building examples inside an
install tree, even if doing that is still ugly.
Change-Id: I386bf2ab959269f55553c70b7551dd9afec2bcba
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qt_example_installs.prf is loaded by every sub-project inside the qt
tree, as qt_build_config adds it.
Change-Id: Ice7e81b280b6964ed5cc1b9f1501bf74df737d7e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
don't complain about library inline sources which have 'builds' but no
'libs'.
Task-number: QTBUG-62150
Change-Id: Ib215d438fc02ebdafde95f31cd48088b1bafc663
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
there doesn't appear to be a reason for the former complexity.
QMAKE_CONFIG_LOG was already assigned the simple way.
Change-Id: I6b7e3b5b97c7647237841fa5e16c4959079edc16
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
it's unclear where to look for the error when the message talks about
'g++' when '${CROSS_COMPILE}g++' would have been expected. help it by
saying whether it was supposed to be the host or target compiler.
this also centralizes the error emissions in a function.
Change-Id: I454c6ff7c0e7dd945dcee0de01e2818caeeb7409
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
We're adding a lot of unnecessary files that end up later as cargo-cult,
for at most a handful of lines. So instead move the testcases directly
into the .json file.
The following sources were not inlined, because multiple tests share
them, and the inlining infra does not support that (yet):
- avx512
- openssl
- gnu-libiconv/sun-libiconv (there is also a command line option to
select the exact variant, which makes it hard/impossible to properly
coalesce the library sources)
The following sources were not inlined because of "complications":
- verifyspec contains a lengthy function in the project file
- stl contains lots of code in the source file
- xlocalescanprint includes a private header from the source tree via a
relative path, which we can't do, as the test's physical location is
variable.
- corewlan uses objective c++, which the inline system doesn't support
reduce_relocs and reduce_exports now create libraries with main(), which
is weird enough, but doesn't hurt.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change-Id: Ic3a088f9f08a4fd7ae91fffd14ce8a262021cca0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Move the logic to set default values for VERSION,
QMAKE_TARGET_DESCRIPTION to qt_app.prf. This way,
a lot more executables get sane defaults.
Change-Id: I8394418c118a8877cec792eddc8894397c0fbf2d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Make the tool description even simpler so that e.g. moc shows up as
"Qt Moc". The 'description' is shown in various places as the mere
title, so it shouldn't be too verbose.
This augments change ad68bf51e7.
Task-number: QTBUG-61970
Change-Id: I4b30b95a10d597a9a8a2c388c2381ea38a340be6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change f046ed395a set the default values of VERSION and
QMAKE_TARGET_DESCRIPTION for Qt tools to generic ones. The version and
description is shown in the properties of the executable, but also
used for crash reports. For the latter it wasn't clear anymore which
tool actually crashed.
The patch therefore adds the executable name to the generic description.
Tools can still overwrite the description on their own.
Task-number: QTBUG-61970
Change-Id: I8366db22f88f0d6575e7f482f030b3c4f05af6c5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
silent.prf modifies the compiler commands by prefixing them with a
silencing echo command. For MSVC, the used $< syntax is only valid in
inference rules. However, the PCH rule is not an inference
rule and breaks when silent.prf is used.
Remove the echo command for MSVC. The compiler already outputs the
currently compiled file. There's no need to do it twice.
Task-number: QTBUG-61688
Change-Id: I7e2c1211e471c9c149c16cac8e87406e88ee2d97
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
With 4183475080, Qt fails to build if
qmake is unable to detect the compiler's default include and
library search paths. Clang on non-Darwin systems was missing working
code for the detection.
Unlike GCC, Clang on its own does not print the library search paths
when called with the -v option.
On Darwin, the -Wl,-v option will reach ld64, which will print those paths.
However, neither GNU ld nor gold will print anything useful with just
-v. GNU ld has a --verbose option that does print some search paths, but
those are not the ones used when ld is invoked (via collect2) by GCC or
Clang, so it can't be used.
To make Clang print its library search paths one can use
-print-search-dirs, which however doesn't print include search paths. So
amend the existing code in order to make a second call to clang on
non-Darwin systems. This second call is used for library path detection,
and fixes the build on non-Darwin (tested on Linux).
Change-Id: Ic858f908ee1a2e0eb307abb074daee0ded38abd5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It prints the warning even if we surround the affected code with
QT_WARNING_DISABLE_GCC("-Wstringop-overflow") (see e4eaa62943),
so we have no alternative other than to disable the warning completely.
Change-Id: Ia3e896da908f42939148fffd14c488c4006040e6
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The strings in Windows VersionInformation resources should be
capitalized by convention, and the entries are usually not terminated
by a dot. However, "Ltd." is an abbreviation and should be
dot-terminated.
Change-Id: Ibea3443ac38846e29a3e77ab3e8d5d77b9370272
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This creates a VersionInfo resource on Windows for Qt's tool
executables similar to what Qt's DLLs contain.
Task-number: QTBUG-55755
Change-Id: I9e5d7bedaec9d14f29a9eeeb6697b07241f860d8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Any version prior to 2015 is not supported anymore.
Change-Id: I9ccc87fc506521b560fda1b4c88f9c3aebd7a485
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Introduce uap3 namespace which is used for newly introduced
capabilities. In addition, the autodetection of namespaces for
capabilities within the uap namespace is disabled in Visual Studio
lately. Hence, the output needs to be more verbose including the
namespace for a capability.
Task-number: QTBUG-60899
Change-Id: Ia1ccf825d4c257d2661e34c195c45fd37e0b6413
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
uikit/sdk.prf replaces QMAKE_MAC_SDK_PATH with a make expansion of that
variable, which of course does not work when we use the contents
directly.
amends 6d5489f5d.
Task-number: QTBUG-61690
Change-Id: Id77dff8ee7d737dd35f74cc7d39faaa50b4b1ab9
Reviewed-by: Eike Ziller <eike.ziller@qt.io>
Some users don't want to download the full Xcode installation which can
weigh upwards of 5 GB download and 20 GB installed.
[ChangeLog][macOS / iOS] Qt can now be built using just the Xcode
Command Line Tools, without needing to install the full Xcode IDE.
Task-number: QTBUG-35928
Task-number: QTBUG-41908
Change-Id: I6d13c9a03ab9087b3ab56e8547f53f0cc2806c7b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Since the mkspecs always set QMAKE_APPLE_TARGETED_DEVICE_FAMILY, it will
never be empty, and the warning message and automatic fallback to
QMAKE_IOS_TARGETED_DEVICE_FAMILY will never be used.
Task-number: QTBUG-60430
Change-Id: I79e36d355dae3f8a4429d73e753fed3c090a5d24
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This reverts commit c0e94dd093, as it
introduced a regression for applications that sets an installation
target (on Android), which a lot of our examples do. The installation
target for Android applications/libraries needs to be within in the
application bundle's directory tree, or it won't work.
Task-number: QTBUG-61635
Change-Id: I8c919ef3888d7679b0f9659796f5e590bc1faa57
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Adds a bit of extra safeguard to ensure we don't accidentally fall into
the generic unix isEmpty(QMAKE_DEFAULT_{INC,LIB}DIRS) code-paths.
Change-Id: Id760b32cd29cb2b9db1390c174e1637e2dddaabc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
these are not meant to be deployed, so the install hack should skip
them.
Task-number: QTBUG-42830
Change-Id: I870499dca2cfea87bf0048f019d651ce9cc5d788
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
while it's mildly insane that we auto-generate install targets to start
with, we can at least refrain from doing so if there is one already.
as it happens, this removes the need for excluding the qt build
explicitly.
Task-number: QTBUG-38452
Change-Id: I74d5df447fba525fa79896c9be2c71d82bc2c6ce
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This was originally enabled in the mkspecs for 64-bit QNX 7.0.0
but that broke when the qtConfig change was made. It looks like
qtConfig shouldn't be used in the platform mkspecs. I suspect
the stack-protector changes were left out of the 32-bit mkspecs
so that 6.6.0 builds wouldn't be affected.
Ignore the stack-protector/stack-protector-all possibility since
it isn't possible to access it without a command line option.
Specifying both options doesn't even make sense since
stack-protector-all encompasses stack-protector.
For now, leave out command line control of this feature.
Task-number: QTBUG-59644
Change-Id: I99323216be5b592dd2c3bef6d22da195764a6e65
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The -Xarch option is not supported by ccache, so unless we need to
distinguish precompiled headers for multiple architectures it's better
to not pass it.
Change-Id: Iae02d37f7a89aedebecedff7290f88d2de1ca362
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
