This is a left-over from the cleanup of MMX/3dNow!/SSE support, which we
no longer have in Qt.
Change-Id: I48388710a499bddb518ae3c2b8a4ad989482f58c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If SSE2 isn't supported, then SSE3 can't be either. Onwards and upwards
for SSSE3, SSE4.1, SSE4.2 and AVX. The test for AVX2 was already there.
Task-number: QTBUG-24773
Change-Id: I005258db52d8abcd407a99b8ebcc23cdea8e3d9f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This got messed up in merge 4a8273a6fc
thanks to automatic conflict resolution.
Change-Id: Idbe1545c7d3ee0580bf2c1381dd3e8b2191dc3e8
Reviewed-by: Michael Brasser <michael.brasser@live.com>
d34cae51 introduced a new configuration parameter, xcb-xlib, but did not
remember to set the internal variable after the config test was run,
resulting in a potentially incorrect reporting of the option.
Change-Id: I979589d9aad2eb5e0fac069dfcd5b329a51ae059
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the change is wrong for multiple reasons:
- it is possible to build qt (the offscreen plugin) with xlib but
without xcb, which was impossible after the change
- the check was built in a way that if xcb is auto-detected but xlib is
missing, configure would abort (instead of disabling xcb), which is
unreasonable (cf. linked task)
- it should be possible to build the xcb plugin without xlib - it's
testing for xcb-xlib and should have the correct #ifdefs. if these are
broken, they should be fixed. if this is unrealistic, the build system
should be adjusted to this fact ... differently.
This reverts commit 683451e7c7.
Task-number: QTBUG-34382
Change-Id: I1c5811e2fb1f09b084b6aeb7350e5f376e1b9b82
Reviewed-by: Nicolás Alvarez <nicolas.alvarez@gmail.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Testing feature macros is not enough for uclibc. Fixes build of the built-in
sqlite3 with uclibc <= 0.9.33.2. Later versions will have posix_fallocate().
Change-Id: I918a52777ac63624635802221effc6b86fa2269c
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
We require glx version 1.3 which is where fbconfig is first defined.
Also make use of the configure test and report the glx status.
GLX support should always take precedence when compiling the
xcb backend
Change-Id: Ie46834210bf5cd2ac4006ff08379e0d3434ffa2b
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
This adds a new configuration parameter, xcb-xlib, which allows
overriding the configure test for that existing configuration option.
The use of xcb-xlib in the xcb platform plugin becomes the preferred path
for non-OpenGL ES 2 builds, while the EGL codepath is used otherwise.
This has the advantage that EGL can be used with Desktop OpenGL if Qt is
configured with -no-xcb-xlib.
Change-Id: I5018e31fe0399b94f020c671eff9414d00431c44
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
desktop opengl and egl are not incompatible with eachother, so there
is no need to disable egl when on desktop opengl
Task-number: QTBUG-34949
Change-Id: I757c38674a480910d1cb23853c255eb993e107ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
The QtGraphicalEffects module is a QtQuick2 only module so it is clear
why it was left out before iOS had support for QtQuick2, but now it
should be built by default. This commit removes QtGraphicalEffects from
the iOS module "skip list".
Change-Id: Ie0890f6784ad6e276e80bf7a11195c141ca23332
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The QtQuickControls is supported for 5.2 though it does not provide
the system native "look and feel". This patch removes the module from
the iOS module "skip list".
Task-number: QTBUG-35033
Change-Id: Icad479f2e4651c02e569e8a86cfe5ac912d8ed10
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
QtMultimedia is supported in Qt 5.2 and should be built by default, so
it has been removed from the module "skip list"
Task-number: QTBUG-35039
Change-Id: Id43f997251bf392b7f6c0166ee06b7364ce30b8e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
it's beyond me how it landed in the middle of the sql driver detection.
Change-Id: I7d1302e3440b8828a291e3009e9b130a2fdf165f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Plain QNX 6.5.0 does not have a libpps, the new QNX
has a libpps and BlackBerry has it as well. So we need
a configure check to not open another mkspec for this
platform. This fixes the plain QNX 6.5.0 build.
Change-Id: Id4b3876f2385bcb5f3df426945532e7e26133f24
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
introduce XPLATFORM_MAC which is properly initialized from the spec
instead of from the host.
use that and BUILD_ON_MAC where appropriate.
minor bug: during command line arg validation we use BUILD_ON_MAC even
when XPLATFORM_MAC would be in order, because the latter is not
available at that point yet. the solution would be delaying the
validation, but that doesn't seem worth the effort now.
Task-number: QTBUG-33896
Change-Id: I63f361212961bfdd82efde2ca71a1f48904a85fb
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... which is right after performing the platform detection, as proper
license checking needs to know the target platform.
we can do that now, as we moved all more expensive or side effect laden
processing to a later point.
as a side effect, we also get rid of the weird early cmdline parsing.
Change-Id: I0fda0a15a1ea2082603f7097e89aa422853f30fa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
is the only sane thing, and now that there are no dependencies on
anything else any more (in particular anything slow or side effect
laden), we can actually do it.
this removes some nasty OPT_HELP checks spread throughout the code, thus
further reducing data dependencies.
Change-Id: Ib0a00e1514e2aa25ec3b527ba9f5719e3214640b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the help would echo the defaults adjusted by command line overrides and
environment variables for some options. this was entirely pointless.
it also printed the result of the os detection, which was mostly
useless.
but the primary reason for doing this is reducing data dependencies,
so the code can be moved up.
not touching the windows configure, as it's a lot harder and currently
that behavior isn't in the way of what i need to do.
Change-Id: Ide62119091c8494fb3bea2b607f140268f057919
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
it's counterproductive to do it earlier: it's passed down to configure
tests, which then log less info than they could.
but primarily, this serves the purpose of minimizing the amount of code
executed before platform detection.
Change-Id: Iff19b8555de19d048ea6d9341af965871b314c54
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
minimizing the amount of code executed before platform detection.
Change-Id: Ib2c0d97ce5040ced8c4c41d74f428fe7d0f75664
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
it's entirely pointless to flood the user with information and force him
to scroll back when he most likely just made a typo.
apart from that, this reduces the data dependencies, thus easing further
refactoring.
Change-Id: I7b24274d453de54a4f02481a66d77e27d4ab0657
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
moving dead code out of the way of further refactoring.
Change-Id: If558406cdf13d61478634dd7eff644dc67b0e53d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
have this option independent code out of the way before starting option
processing.
Change-Id: I5a08caeb25689b155c256ef82505c000112f5039
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This way, a Qt compiled with qreal=float and one linked
with qreal=double can not be linked by a single downstream. That is
diagnosed at cmake-time.
Change-Id: I9183dbcfef181fadea5321d3154948e8258e4a2a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
On modern ARM CPUs there is no speed difference between
float and double anymore, so let's rather use double for
qreal to avoid rounding and precision issues. Like this
we also get much better compatibility with our desktop
OSes.
This is not binary compatible on ARM, but the old behavior
can be restored by passing -qreal float to configure.
Change-Id: I2a4b61e19a3dfa6b0bd76734cecf2634c97207fc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
this makes it possible to properly exclude entire subprojects based on the
availability of features, rather than stuffing every single source file
with #ifdefs.
the defines are aggregated from the -qconfig <profile>,
-no-feature-<foo> and some other configure flags.
usage:
load(qfeatures)
!contains(QT_DISABLED_FEATURES, textarea): SUBDIRS += textstuff
Task-number: QTBUG-28102
Change-Id: I83400632d64312fa4b907e1318dddfe27c432387
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
the path filtering functions assume that DEFAULT_{INC,LIB}DIRS are
newline separated lists of unquoted strings, which 8fbf959be broke.
Task-number: QTBUG-33714
Change-Id: Ie07909963ac5155a8ac79ca9254f34069925e001
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conceptually a Qt for iOS SDK or source build should support building
for both simulator and device, based on the same qmake binary and Qt
libraries. Qt Creator or Xcode should then be able to use the same Qt
version while still building for a single target at a time. This
applies to user libraries as well, which shouldn't require switching
to a different Qt when changing target platform from simulator to
device.
We achieve this by using Qt's exclusive_build feature, where we build
for the two targets in parallel, and then teach Xcode how to choose
the right library dynamically at build time.
Change-Id: I06d60e120d986085fb8686ced98f22f7047c4f23
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
We used to compute the default exclusive build directory, eg 'debug', at
configure time, and then set OBJECTS_DIR, MOC_DIR, etc to include this
hard-coded default exclusive build directory. We then had to run a post-
process step where we replaced the 'debug' part with the current actual
exclusive build pass, eg 'release', resulting in long-standing bugs such
as QTBUG-491 where we end up replacing parts of the build output dirs
that were not part of the original exclusive build directory.
We now set the OBJECTS_DIR, MOC_DIR, etc defaults in configure like
before, but they do not include any exclusive-build information. The
exclusive build directory is handled as a separate step in default_post
where we adjust all entries in QMAKE_DIR_REPLACE to be exclusive
directories.
For backwards compatibility the new exclusive build behavior is only
enabled for variables named by QMAKE_DIR_REPLACE_SANE, which for Qt
itself applies globally to everything but DESTDIR, and for libs and
tools also applies to DESTDIR. The reason for leaving out DESTDIR in
the general case is because many tests and examples assume the old
behavior for DESTDIR. A side effect of including all the other
variables for Qt libs and tools is that the PCH output dir will be
uniformly set, which has been an issue on Windows in the past.
The addExclusiveBuilds function now takes two or more arguments,
each argument being the key for an exclusive build, which can be
customized eg. using $$key.{name,target,dir_affix}. Passing more
than two arguments results in three/four/etc-way exclusive builds,
eg debug/release/profile. Exclusive builds can also be combined, eg
static/shared + debug/release by making two calls to the function.
We also handle individual targets of combined exclusive builds,
eg static/shared + debug/release, meaning it is possible to run
'make debug' to build both static-debug and shared-debug.
Task-number: QTBUG-491
Change-Id: I02841dbbd065ac07d413dfb45cfcfe4c013674ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Avoid need to modify qnx.pro in src/plugins/platforms/qnx to
build with imf support. By default detects if necessary headers
and libraries are available. Can also be explicitly requested or
disabled with -imf and -no-imf options.
Change-Id: I3f9780fc189a33e4c93fb4f950111121f8e947c3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Status for LIBUDEV printed again in the configure output under 'udev ....'
Change-Id: I3e0beca4c6de315dc2dfbdc24d83f4d9cd2b8856
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Nothing in qtbase uses gstreamer, so this is just a red herring.
Change-Id: I93fb20a70928d84fed8f33ca4c5df38779928f1a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
apparently some awks need the regexp delimiters to be escaped even
within a character list.
Change-Id: I74a77022e134cafa269960c5c88a9a88589f1b95
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
but this time without reshuffling it. it's actually easy with awk.
this makes the resulting qconfig.pri cleaner (and thus easier to debug).
and configure needs a few millisecs less to finish. ^^
QMAKE_DEFAULT_INCDIRS doesn't appear to contain dupes to start with.
Change-Id: I9eed2cf853cd15d0d24a885b1c3d69f22ffafb36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the consumers of these variables use the strings for naive text-based
"subtraction", which of course doesn't work particularly well when the
paths contain "../", "./", and trailing slashes.
Task-number: QTBUG-33714
Change-Id: I893c90e6f5c7cf18c9e6cb1e5be825a16509a2a4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Don't discard stdout, it might contain important information. For
example, if qmake crashes, the segfault or similar notification comes
to stdout.
Change-Id: I53def75f37f134544922cf01b4f2ba7c903351cb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The regular expression does not parse correctly when a device option value
contains the character '=' (e.g. QMAKE_CFLAGS="-D_FILE_OFFSET_BITS=64").
In order to break string at the first equal sign and to simplify code,
use "cut" command as in other places in configure script.
Task-number: QTBUG-33584
Change-Id: I05b474d2ba6bff84c1e40d00475963bab36d94b6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This module doesn't make much sense for iOS.
Change-Id: Iadcf3006e1e2bdd97c460e836e91717856cb118c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Iikka Eklund <iikka.eklund@digia.com>
These modules don't build for iOS or don't have a backend yet
Also organizing the list a bit while we are it.
Change-Id: Ic72e897325c9478f66af8e8f879fe6342eb327dc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Added QXcbSessionManager to the Xcb plugin.
QXcbSessionManager inherits from QPlatformSessionManager, it's a port of
QSessionManager as it is in Qt 4.8.
Minor changes also in QPlatformSessionManager and QGuiApplication to
hook it up.
Task-number: QTBUG-28228
Task-number: QTBUG-30011
Task-number: QTBUG-33033
Change-Id: I50b33d05a1e32c5278dea339f693713acc870a70
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
The 4.7 version of the toolchain in the NDK has been
obsoleted by the introduction of version 4.8. The default
can still be overridden if necessary.
Change-Id: I042ded92e50dc5ebc4d54ffccc2e6856fc3edba0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The XCB port is still incomplete and needs Xlib in several places.
The configure script should reflect that and make sure Xlib is present.
Change-Id: I6d81ea6cacef56084cf7ccfbcf908d597aae918f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The XCB platform plugin is the only one that requires Xrender.
Change-Id: Iac2efa31b4b51e38305ee5f635fe38b75c7752de
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this adds the possibility to put the actual qt installation outside the
sysroot it is configured for. this makes it possible to install an
x-built qt without "polluting" the sysroot, which makes it possible to
have read-only sysroots, and multiple qt builds for one sysroot.
-prefix is the location within the sysroot as seen by the target itself,
and gets "burned" into QLibraryInfo in QtCore.
-extprefix is the location in the host file system and gets "burned"
into QLibraryInfo in qmake. if it is not specified, it defaults to the
sysrootified prefix, which is the previous behavior.
Task-number: QTBUG-26680
Change-Id: Ia43833c4e27733159afeb8c8b9b2d981378d0cd1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
well, not really - qt_parts.prf will still create one, but it will be
empty.
apart from being cleaner, this now finally makes it possible to load an
unconfigured qt source tree into qtcreator without random parts of the
tree being missing from the project explorer.
Change-Id: Ida7ee77ecb450af05bfa66106caf2067b02f1a7f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
To instrument a Qt application or library with the gcov coverage
tool, do `CONFIG+=gcov' in the application .pro file.
To instrument Qt itself with gcov, use the `-gcov' configure
option.
Change-Id: If24e91d95318609b0df1a76ed6d679bd92bcaab2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
the -l* fallback is for adding libraries. it obviously makes no sense in
its negated form.
Task-number: QTBUG-32550
Change-Id: I9f3af9a2fc059ba39987d4b197ed4778cc7f35b6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
On systems where xkbcommon >= 0.2.0 the output should be
xkbcommon .............. yes (system library)
instead of
xkbcommon .............. yes
Change-Id: I5807946e61814d414a68a15ad96c91f25c9482ee
Reviewed-by: Gatis Paeglis <gatis.paeglis@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead the module decides now itself whether it supports iOS or not, because
soon it will enable itself :)
Change-Id: I4802441f0a01ed62966a7a0e66f5a8ccfe843cb8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the built host tool may need to know what the target architecture is,
e.g. mkv8snapshot does.
Change-Id: Ie5b1f6a07fa082d212e7c5b54289de49fd74dbcf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
because of popular confusion.
the packaging scripts now need to use -no-compile-examples explicitly.
Task-number: QTBUG-32449
Change-Id: Iecab1f345afe21e540204fe69a2292ef932cbb61
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
QtPlatformSupport fails to build if EGL support is enabled but OpenGL
isn't. It tries to compile eglconvenience, but qplatformopenglcontext.h
is empty (#ifndef QT_NO_OPENGL).
It makes no sense to have EGL with no OpenGL ES, so make sure we don't
try it.
The current test to disable EGL if OpenGL desktop is active is upside
down. With -opengl desktop -no-egl, it would complain that EGL support
was requested.
Task-number: QTBUG-28763
Change-Id: I80c780ec78181f3fa85f43e41be21d1217d76610
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The $AWK variable already contains the best awk version
available. Possible values for this variable are: gawk, nawk or
awk.
Using just awk fails on Solaris with:
user@localhost:~/qtbase$ ./configure -platform solaris-g++
awk: syntax error near line 4
awk: bailing out near line 4
This is the Qt Open Source Edition.
Change-Id: I02a17915e8b27a5ce7e831a1225872cf460b3a6b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The 'local' keyword doesn't exist in Solaris' bourne shell as a
reserved word.
Change-Id: I3270c74f79842ee10481a40a9f82d9fb74aff2e5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
shifts the makefile generation one directory level up.
this allows the top-level configure to leave the makefile creation
entirely to the qtbase configure.
this is not very clean modularization-wise, but consistent with -skip.
Change-Id: I7ee2d2f29f2e6619d61fe9b55faa0bacdf3c44c1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the option the user most likely meant is called -nomake.
Task-number: QTBUG-21778
Change-Id: I6d8c4d5a984c929804f49ffc2ac75f6945f76e81
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
