Commit Graph

60 Commits

Author SHA1 Message Date
Thiago Macieira
81b00670f2 Use QElapsedTimer instead of QTime to measure elapsed time
QElaspedTimer is a lot more efficient.

Change-Id: I66d9514108f800a45181d8960b01a5e7d3fa9e80
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
2012-09-13 22:40:34 +02:00
Thiago Macieira
53a7778b90 Increase the fuzziness of the QSemaphore test to 50 ms
The test tries to acquire a semaphore that isn't ready, so it will
timeout. The test is working properly.

The only problem is that 10 ms is too strict. For a wide variety of
reasons, especially since the Qt CI system runs multiple tests in
parallel, the program may not run again in that 10 ms window.

Change-Id: Ic0f684895f73646db5f1cc783fe9ef75fb1ab02b
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
2012-09-13 22:40:27 +02:00
Thiago Macieira
8e0bac89d4 tst_QMutex: add markers to the tryLock tests
Just to make it clear which two sections go together.

Change-Id: If3724d1c84172a61bdd7931cc567f4b7140d4f8a
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
2012-08-23 11:20:37 +02:00
Thiago Macieira
c9bfd34fa0 Enable QAtomicInteger for char16_t and char32_t
Those are regular, integer types, of 16- and 32-bit width,
respectively. C++11's std::atomic supports them, so we should too.

C++11 also supports wchar_t, but since that type's size can change, I
don't feel like support for it in Qt is pressing.

Change-Id: I945b641c91a8a98be82715f878c382dee58ac98b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
2012-08-18 18:35:50 +02:00
Thiago Macieira
2b00f97ab0 Add Q_DECL_CONSTEXPR to the isXXX functions in the new atomics.
This allows one to write code that depends on these values at
compile-time.

Change-Id: I7d78524ed9c70d4141360496d1d764dcbfa92e62
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2012-08-18 18:35:36 +02:00
Thiago Macieira
672b5b7ab6 Set the Qt API level to compatibility mode in all tests.
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.

Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
2012-08-01 15:37:46 +02:00
Thiago Macieira
920dcb0158 Ensure that QAtomicPointer of forward-declared classes works
This is working, but let's just be sure by adding a testcase.

Change-Id: I8c6b5ded0c7b6c90645dbf70a7ce6c1ba447a284
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
2012-07-30 10:43:50 +02:00
Rohan McGovern
bcf20e122a Avoid load(testcase) for installing test helper apps
Make test projects declare TEST_HELPER_INSTALLS rather than calling a
function exported by testcase.prf.  load(testcase) may be unsafe, as
testcase.prf should be processed after default_post.prf.

Fixes silent disabling of various autotests.

Change-Id: I56b35ffd653a637ad5ab18d64dd1a1edadfac59f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Kurt Korbatits  <kurt.korbatits@nokia.com>
2012-07-04 02:46:27 +02:00
Kurt Korbatits
551e1e63d9 Fixed several unit tests to work in shadow builds
- qlogging, qthreadstorage, qnetworkreply, qapplication, qfile, qprocess
  Added app_bundle and debug_and_release_target to CONFIG

Change-Id: I6212902c449520dc016da9590149a423069cc38c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-06-29 04:57:04 +02:00
Stephen Kelly
7d28f7772c Use QPointer instead of QWeakPointer.
The use of QWeakPointer for tracking QObject pointers is to be
deprecated.

Change-Id: If460ca7f515db77af24030152f4bd56e1a5fae7c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2012-06-05 18:42:26 +02:00
Rohan McGovern
177070cb7b Add CONFIG+=parallel_test to suspected parallel-safe tests.
These tests have passed a parallel stress test on all three of Linux,
Mac, Windows.  Mark them with CONFIG+=parallel_test to allow CI to run
them in parallel, saving time.

Change-Id: I19fd333c3c645a67374ca998f6c8530dd236b0f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
2012-05-28 07:33:01 +02:00
Rohan McGovern
360797208b Removed CONFIG+=parallel_test from suspected parallel-unsafe tests
These tests have failed a parallel stress test and may contribute to
instability in test runs.

Change-Id: I2c4456ad7d3846c2262a0ba714ab8f0c9a05c597
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
2012-05-22 05:09:01 +02:00
Toby Tomkins
91fda8f119 Remove parallel flag for qsemaphore because of flaky nature.
The CI system is now using the parallel_test flag to run tests in
parallel. This test has become flaky, or at least more flaky than it
was previously. Mark it to no longer run in parallel.

Change-Id: I47bca3be620a8f648a0eb9c9b9f26d2d925efc01
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2012-05-18 10:33:17 +02:00
Thiago Macieira
2376a5c4e0 Make the event notification on Windows be mandatory in all dispatchers
This way, QWinEventNotifier will work on all Windows systems, not just
with the default event dispatcher. Other dispatchers (other than
QWin32EventDispatcher) are permitted, so the class should not abort just
because of that.

If a dispatcher really doesn't want to implement this, they need to
implement the virtuals to do nothing, possibly print a warning.

Change-Id: I2c132bcde95b9d5941c8906a0fcd2ad964087772
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
2012-05-04 12:44:14 +02:00
Laszlo Papp
8b56b8ed32 Add a remainingTime() method to the public interface of the QTimer class
It is an extension coming from the use case when you, for instance, need to
implement a countdown timer in client codes, and manually maintain a dedicated
variable for counting down with the help of yet another Timer. There might be
other use cases as well. The returned value is meant to be in milliseconds, as
the method documentation says, since it is reasonable, and consistent with the
rest (ie. the interval accessor).

The elapsed time is already being tracked inside the event dispatcher, thus the
effort is only exposing that for all platforms supported according to the
desired timer identifier, and propagating up to the QTimer public API. It is
done by using the QTimerInfoList class in the glib and unix dispatchers, and the
WinTimeInfo struct for the windows dispatcher.

It might be a good idea to to establish a QWinTimerInfo
(qtimerinfo_win{_p.h,cpp}) in the future for resembling the interface for
windows with the glib/unix management so that it would be consistent. That would
mean abstracting out a base class (~interface) for the timer info classes.
Something like that QAbstractTimerInfo.

Test: Build test only on (Arch)Linux, Windows and Mac. I have also run the unit
tests and they passed as well.

Change-Id: Ie37b3aff909313ebc92e511e27d029abb070f110
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
2012-04-03 15:10:05 +02:00
Thiago Macieira
2cf466312b Unit-test the additional QBasicAtomicXXX expansions
Test that they do expand properly and don't produce errors. This is
templated code, so it doesn't get tested fully unless we instantiate
them.

Also check that the alignments are correct.

Change-Id: I2a8ee2165167f54b652b4227411e209850974b8e
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
2012-03-28 02:16:39 +02:00
Kurt Korbatits
1dc7aed0e9 Fixed qthreadstorage unittest to work from install directory
- Added install of crashonexit sub program

Change-Id: I2cc3043d5c1b879665930552487b4fe54407fd25
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-03-26 03:42:10 +02:00
Jason McDonald
c4342ddea0 Fix indentation of QWaitCondition autotest.
No functional changes - cosmetic change only.

Change-Id: I7332eaab31720776c70a7ef813d55db44bab83f7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-03-12 13:14:05 +01:00
Friedemann Kleint
ed8d8451c4 Fix QThreadstorage test.
- Create subdirectories containing profiles to avoid
  problems with -fast.
- Use QFINDTESTDATA to locate binary.
- Make it a console application, no Mac-bundle.
- Add error messages to the test, give it a longer time-out
  and ensure sub-process is killed if it hangs.

Change-Id: Ibc177b786c4bc8fdbc068a8c45f4801a41c9f660
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
2012-02-27 18:33:50 +01:00
Stephen Kelly
b067f6cfe3 Add the quitlock feature to QThread.
Change-Id: Ib44ee9739499ba4c5f0fecbef3976251ea22836d
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2012-02-23 15:07:58 +01:00
Bradley T. Hughes
2e18c16e59 Speed up tst_QWaitCondition
Reduce the thread and iteration counts to make this test execute faster.
This change reduces the runtime to 14 seconds (from 5 minutes, 38
seconds).

Change-Id: Id5ea056cfd33022da5a06809f0598a5cdb02b27b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-02-20 00:21:00 +01:00
Bradley T. Hughes
f0f78eb0a9 Remove usages of QT_ARCH and QT_ARCH_* from qtbase
The architecture is detected at compile time based on the predefined
macros from the compiler. Don't use QT_ARCH in .pro, .pri, or .prf
files.  The PNG_NO_ASSEMBLER_CODE define from libpng.pri is not present
in the current copy of src/3rdparty/libpng, so no change in
functionality is expected.

The conditional for the SUPPORT_JIT define in pcre.pri is moved to
src/3rdparty/pcre/config.h, again so that we can use the compiler's
predefined macros to detect the architecture at compile time.

Replace QT_ARCH_ARM, QT_ARCH_MIPS, and QT_ARCH_SPARC with their
Q_PROCESSOR_* equivalents.

Replace QT_ARCH_INTEGRITY, QT_ARCH_VXWORKS, and QT_ARCH_WINDOWSCE with
their Q_OS_* equivalents.

Note that this commit also effectively disables the SPARC atomic
implementation. An inline implementation for SPARC needs to be added,
or we remove the current code and instead rely on the GCC intrinsic or
C++11 std::atomic support on SPARC.

Note also that this commit does not remove QT_ARCH from configure or
qconfig.h. This will continue to be set until all Qt 5 projects can be
moved away from using QT_ARCH.

Change-Id: I5de747cc4436d21941329974cff3016970f497b8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
2012-02-17 08:22:43 +01:00
Jason McDonald
ab9be7cc23 Eliminate duplicate data row names from corelib autotests.
Change-Id: I57a37f19746b76c6c9c3534f5c66c5a5478dae24
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-02-14 06:19:16 +01:00
Rohan McGovern
3ae3aa0e51 Improved stability of tst_qsemaphore (especially on mac)
Timers are not entirely precise; if we ask for a timeout of
10000 milliseconds, we might time out in 9999 instead.
Also, we know the expected elapsed time in each case, so do a fuzzy
comparison against that time.

Previously the test was verifying that the elapsed time was greater than
or equal to the timeout in the case where a timeout was expected, which
means the test would not detect bugs which incorrectly caused the
timeout to occur later than it should.

(cherry picked from qt4 commit 9a2573dc13b3e8df6cd15bef64370ea407480fc7)

Change-Id: I91d0c81f989ab43a3c48f6abbb4c5b28e2b35402
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
2012-02-08 02:10:51 +01:00
Lars Knoll
96501b0a18 Move QtConcurrent into its own module
Task-number: QTBUG-20892

Change-Id: I614500aafb6428915509983608bbb0ade4e4f016
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2012-02-05 17:49:16 +01:00
Jason McDonald
5635823e17 Remove "All rights reserved" line from license headers.
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.

Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-01-30 03:54:59 +01:00
Gunnar Sletta
4ecf82795d Remove use of QT_MODULE from library
These defines were there to aid in the commercial
licensing scheme we used long ago, and are no longer needed.

Keep a QT_MODULE(x) define so other modules continue compiling.

Change-Id: I8fd76cd5270df8f14aee746b6cf32ebf7c23fec7
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
2012-01-25 10:19:44 +01:00
Jason McDonald
629d6eda5c Update contact information in license headers.
Replace Nokia contact email address with Qt Project website.

Change-Id: I431bbbf76d7c27d8b502f87947675c116994c415
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-01-23 04:04:33 +01:00
Kurt Korbatits
990e890b9e Changed unittests in corelib to use specific headers instead of super-headers.
Modified unittests to use specific class headers instead of
using super-headers like QtCore that pull in all the headers for
the module.
- Decreasing build time.

Change-Id: I9c3fd0767be15205893bb406f609c8283a2a3a5a
Reviewed-by: Kurt Korbatits  <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-01-16 01:55:22 +01:00
Jason McDonald
1fdfc2abfe Update copyright year in license headers.
Change-Id: I02f2c620296fcd91d4967d58767ea33fc4e1e7dc
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-01-05 06:36:56 +01:00
Bradley T. Hughes
68202f646a Make sure tst_QThreadStorage finds its subprocess
On Mac, the application's dir is in the bundle, so we need to "escape"
the bundle when looking for the an executable relative to the
application's dir path.

Change-Id: I5c01f7d816ec8cc30f5277202f4eefb0c49a2bc3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-01-03 12:58:24 +01:00
Jason McDonald
fda36df6ba Use true and false in preference to TRUE and FALSE in tests.
Use the C++ boolean constants true and false instead of the C macros
TRUE and FALSE (which are actually integers), and use QVERIFY instead of
QCOMPARE for verifying simple boolean expressions.

Change-Id: Ie76dfcab6722df6b93b3fa62b0f3437901482932
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-01-03 02:57:12 +01:00
Bradley T. Hughes
2bbf9befd8 Add Qt::TimerType argument to QAbstractEventDispatcher::registerTimer()
... and deprecate the old registerTimer() functions. The new pure-
virtual registerTimer() breaks source-compatibility. Subclasses cannot
be instantiated anymore, since the pure virtual function signature has
changed.

QAbstractEventDispatcher::TimerInfo is no longer a QPair. It is now a
struct with timerId, interval, and timerType members. This is a source
incompatibility that should only affect subclasses of
QAbstractEventDispatcher, which will need to pass 3 arguments to the
TimerInfo constructor instead of 2. If the subclass used QPair<int,int>
instead of the TimerInfo typedef, the QPair<int,int> declarations will
need to be replaced with TimerInfo.

Call the new registerTimer() function with the type from
QObject::startTimer(). Change all subclasses of QAbstractEventDispatcher
to reimplement the new virtual function. The type argument is unused at
the momemnt, except to ensure that registeredTimers() returns the type
each timer was registered with. Implementations for the various
dispatchers will be done in separate commits.

Author: Thiago Macieira <thiago.macieira@nokia.com>
Change-Id: Ia22697e0ab0847810c5d162ef473e0e5a17a904b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2012-01-02 10:44:00 +01:00
Jason McDonald
087c4c6bc1 Remove mention of trolltech from QThreadStorage test.
Task-number: QTBUG-19653

Change-Id: I6c74a15b6c6db415a545328b73b6dd704d69bfee
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-12-28 02:56:08 +01:00
Friedemann Kleint
f54916697a QThread-test: Fix test on Windows (timer inaccuracy).
- Tolerate WaitTime - 1 (799ms when expecting 800ms).
- Remove commented-out code.

Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>

Change-Id: Ibe246d47ab7667692386b0f9333150c195948282
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
2011-12-14 23:26:15 +01:00
Jason McDonald
e3640d1bdd Remove TESTED_CLASS/TESTED_FILES comments from tests.
These comments were mostly empty or inaccurate.  Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.

Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-12-06 02:19:25 +01:00
Bradley T. Hughes
409b3b42a2 Remove cast and assignment operators from QAtomicInt and QAtomicPointer
This is a source incompatible change. There is concern that the
convenience of the implicit cast and assignment operators can lead to
misuse. Several commits have already been done that remove excess use
of the implicit cast, which is a *volatile* read every time it's used.

Users of the QAtomic* API should have to think about when they are
loading the value, and if they do or don't need the acquire memory
barrier on load. The code that people would write using this API is
meant to be multi-threaded, concurrent, and correct. The API should not
allow them to inadvertently, possibly unknowingly, shoot themselves
in the foot.

SC-break-rubber-stamped-by: Lars Knoll

Change-Id: I88fbc26d9db7b5ec80a58ad6271ffa13bbfd191f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2011-12-02 13:21:32 +01:00
Rohan McGovern
3385fb91e1 Fixed installation of corelib tests
In .pro files, removed wince/symbian-specific DEPLOYMENT cases and
replaced them with TESTDATA where appropriate.

In .cpp files, removed SRCDIR and relative paths to testdata and
replaced them with the QFINDTESTDATA macro where appropriate.

Modified test helper apps/libs to install themselves under the test
they relate to.

This change allows corelib tests to be correctly installed, along with
their testdata, via `make install'.

Change-Id: I5e202e2f3b577af7e39072d5c9fe13e0ca125304
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
2011-12-01 09:12:52 +01:00
Olivier Goffart
3ad7ddf265 Fix crash in tst_qatomicpointer test
if given char*, QCOMPARE will try to compare the strings pointed by the
char*

In this case, the char* just point to garbage, we just want to compare
the addresses.

(Was changed in commit 6fcfae99d3)

Change-Id: I9edb2b676aedf67a252aea6a41d56cd1eef7befc
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
2011-11-29 00:07:02 +01:00
Olivier Goffart
e1147dcb4b Test QAtomicPointer<const T>
Commit f4b6628083 fixed it on windows.
Now test it work within QAtomicPtr

Change-Id: Ibf5c31a133d6d544a78ce626fac9085b73c97fd5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2011-11-26 13:10:09 +01:00
Jason McDonald
e08410ab8d Cleanup corelib autotests
Bug trackers come and go, so using bug identifiers in function and test
case names will ensure that those names eventually become meaningless.
It is better to choose a meaningful name and provide explanatory
comments where appropriate.

Change-Id: I67c27782ef21b5d4eaab4854079a043c8ef6957b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-11-25 07:56:16 +01:00
Friedemann Kleint
e8b4c49efd qtbase tests: Fix some warnings
- Fix warnings about QAtomicPointer/Int usage
- Fix some gcc 4.6 warnings about assigned/unused variables

Change-Id: Ib4dbf9110f0dad93ad48e97278310f05fad3a82a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-11-21 09:58:23 +01:00
Jason McDonald
a8fd0c3654 Don't depend on moc to disable test functions.
The moc tool is not aware of all defines (particularly those that are
compiler builtins) and does not correctly evaluate others that depend
on compiler builtins, such as Q_OS_FOO.

This commit reverts parts of the following commits, but is not a
complete fix as there were many instances of this problem in the tests
prior to those commits:
    924d810dbd
    8aaff67510
    338d3f1197
    a55034062b
    253497b744
    7cfad460c5
    9d2ff58f36
    0cf6baa2d6

Change-Id: I947d797fe3ec76139ba1b55561cea569895662c5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-11-18 01:51:57 +01:00
Rohan McGovern
70d91b5c46 Fixed compile of autotests with -qtnamespace.
Make sure to use the Qt namespace for qGlobalPostedEventsCount.

Change-Id: I558a0b0fba1e22a2edd96f9499a2bab82046c4a4
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
2011-11-18 00:07:51 +01:00
Bradley T. Hughes
6fcfae99d3 Remove warnings from deprecated atomic operators in autotests
Use QAtomic*::load() and ::store() instead of the deprecated
cast, assignment, and comparison operators. These will be removed
in the near future.

The tests for these particular operators have not been changed,
though, as the change to remove the operators will also remove
the respective tests.

Change-Id: I2f24d18992af0c6e0f487d707218e4e84f4bdd12
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
2011-11-16 10:32:10 +01:00
Sven Anderson
2b7d98ef8f Allow to create a custom event dispatcher for specific QThreads.
QAbstractEventDispatcher() does no longer install itself into the current
thread.  Instead the new methods QThread::setEventDispatcher() and
QCoreApplication::setEventDispatcher() allow to install a custom event
dispatcher into any QThread as long as there is no default event dispatcher
created yet.  That is, before the thread has been started with
QThread::start() or, in case of the main thread, before QCoreApplication has
been instantiated.

Change-Id: I7367e13d8d8aebed5a5651260bb69b8818eb1b90
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
2011-11-15 10:16:12 +01:00
Jason McDonald
578e6d6834 Cleanup corelib autotests
Remove various disabled and/or non-helpful debugging code.

Any test diagnostics that are useful should be part of the regular test
output, as the CI system cannot switch on commented-out code when there
is a test failure.  Diagnostics should also be informative -- simply
printing the value of a variable with no other information about what is
being printed (or why it is being printed) is not informative.

Change-Id: I21a6c2121be86001bb57e80f426507b6e619ee9e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-11-14 07:33:57 +01:00
Jason McDonald
64c8691548 Cleanup corelib autotests
Use QVERIFY2 to provide better test diagnostics.

Change-Id: I128004f4ee133ceed4d8f373bbbe4a0eee431ebf
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-11-11 04:28:14 +01:00
Jason McDonald
94fc875079 Cleanup corelib autotests
Tidy the autotest .pro files.  Most autotest .pro files should look like
this:

CONFIG += testcase
TARGET = tst_something
QT = core testlib
SOURCES = tst_something.cpp

Change-Id: I877c2194e9fa9dd13478d117895e1e255a948ad7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-11-11 02:45:05 +01:00
Jason McDonald
8e11f7c93a Cleanup corelib autotests
Remove literal tabs.

Change-Id: I210a0259773cceb20d35ebc80b889e3ebb88b540
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-11-10 04:42:45 +01:00