The content in the porting guides are closer to a changelog than
a porting guide. At this point, it is easier for maintainers and
contributors to write in a changelog than a guide. This change
should help with readability and is closer to the usage of
"Changes" in documentation.
Part of a rename in other submodules.
Task-number: QTBUG-87156
Change-Id: Ib59de7976fae19e7b39962e80161df6628e4070b
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
For non-cross-builds, qt-configure-module is located in
CMAKE_INSTALL_PREFIX/bin, not below the staging prefix.
Fixes: QTBUG-88262
Change-Id: Ib6cdd88ece391d5b8ce850b991564e5bed1e475d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
With derived class from QDeviceDiscoveryUDev, eglfs for a platform
can create own input handlers.
Task-number: QTBUG-85268
Change-Id: Ib8e99b365195eff9540e7c90e14c5d269d37ad86
Reviewed-by: Elvis Lee <kwangwoong.lee@lge.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The logic in qgrayraster was ready for it except for an intermediate
format. qrasterizer.cpp and qcosmeticstroker.cpp uses a dot-16 fixed
point format, and had to be changed to handle higher coordinates on
64-bit architectures.
Fixes: QTBUG-84428
Change-Id: I85ab7a04e38bd0dbcefa9f16c16ccc84785a33cf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QFont::setWeight() just accepts values between 0 and 900 anyway.
Fixes: oss-fuzz-24986
Pick-to: 5.12 5.15
Change-Id: Ic65139a7821be3a12c65444d010736f03c8b74f5
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If the user turns on debug_and_release with the configure script,
FEATURE_debug_and_release will not be set, and the debug postfix won't
be set correctly.
Directly use FEATURE_debug_and_release's condition instead.
Change-Id: Ica4af3caa25f2e6712eca4659818aac2c8b95256
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Configure now translates -developer-build to INPUT_developer_build
without setting FEATURE_developer_build.
The install prefix determination code in QtSetup.cmake happens much
earlier than the feature evaluation. As the developer_build feature is
merely a switch that's supposed to be flipped by the user, we can just
translate the INPUT_developer_build value to FEATURE_developer_build in
QtSetup.cmake.
Fixes: QTBUG-88318
Change-Id: I57918232359e2e367e41b779d3f4737731dd76e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Move some lines into createSedArgs. This is used
in follow up patch.
Pick-to: 5.15
Task-number: QTBUG-87154
Change-Id: I226f4aad4aaf703a4726c42b40afb4bde3a9d878
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
gcc, clang, and MSVC all use lowercase "warning:", "error:" and
"note:". Follow that standard.
Also, include a column number; just print 1, as the Symbol doesn't
give us a column number, and searching backwards for a newline seems
overkill.
This fixes IDE integrations that parse compiler output using regular
expressions.
The test checks for moc output, but most tests were so far only
running on Linux systems. Expand this to Unix for most tests, which
then includes macOS.
Change-Id: I0a6151cc0dc50e52ca72ff8048a45213aebdb3a8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Fix warning about requestedFormat not being initialized in sequence.
Change-Id: I7b948cb356b65ea2953424a700eb1a70cd1802f9
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
And drop the use of 'please' when documenting replacements for obsolete
values.
Change-Id: I1c5697023794f2935755d538fad602fe78ba8501
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
qdoc's clang knows about spaceship operator, but we still need to
document the regular ones.
Also add missing return types.
Change-Id: If382ac2f51a49c9adbe4a99025403a3e8332fabd
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
\l expects the link target first, then link text second
Change-Id: I4d8638c2c441c6d2949b1f011422c191df3ff619
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Bring QPixmapIconEngine on par with QIconLoaderEngine
when it comes to @Nx pixmap handling: Make the scale
factor a test parameter during icon lookup.
This allows storing e.g 16x16@1, 16x16@2, 16x16@3 versions
of a pixmap in the icon, and then having QIcon select
the correct one based on the target devicePixelRatio.
Extend the qiconhighdpi test to also cover QPixmapIconEngine,
via the addPixmap() API.
The corner cases of pixmap lookup can be much complicated.
QIconLoaderEngine and QPixmapIconEngine should ideally
have identical behavior in order to avoid surprises.
Change-Id: I17552cc61755bff9553c4a462e3983ac6759c13b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This patch reduced the runtime of "QString::number(12345678)"
from 119ns to 84ns in one measurement. It removes one copy of a
QString into a local lambda function, it adds a std::move on
return, removing another QString instantiation and it removes
the usage of StringBuilder on return, which created another QString.
Task-number: QTBUG-87330
Change-Id: Ia37e314353c354ae04402cd482d0f7aeabbfc0cb
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
A static assert was misstated. The equality operator has precedence
over the bitwise or operator, the static assert was thus not checking
what it was intended to check. Fixed by this patch.
Change-Id: If21faa617dca1d1786fc6bfaf0b87423e0d35e4e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Add fake targets for .qml/.js and other files added using
qt6_add_resources
Task-number: QTBUG-87642
Change-Id: I690b223711afe96ea7fdb4cf11b8e3317ed9bbe6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The former *.platform.sh entry has been replaced by more specific
entries, replacing the wildcard with only selected second levels.
Task-number: QTBUG-87925
Change-Id: Ie4ba7c66ba9aa40eafe23f02faa12f19d791cff2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The header is now in src/network/kernel/ rather than src/corelib/io/,
but the qt_attribution.json got left behind and the update program was
still in a sub-dir of util/corelib/. Renamed the latter to
util/publicSuffix/ (second-layer sub-directory was overkill, util/
isn't crowded and it was the only thing in util/corelib/; and there
was no util/network/). This is a follow-up to
commit 4f076db3d2
Change-Id: I51c2c7892752ddc47390966044eb5650dfdfa9c2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use CFLocaleCopyPreferredLanguages() instead of a home-grown call to a
low-level API. Brought to light by QTBUG-87858.
Change-Id: Ica22c446e01930da65d34c8851e3e67c9d020d8b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Instead of looking up each candidate pattern in a separte O(log(n))
search, exploit the fact that the array is in the right order to put
each candidate we try after the ones we'd have preferred over it.
At the same time, add und_script_region and und_region searches, which
aren't mentioned in the spec's algorithm but are clearly meant to be
searched (the spec's examples include some). Also, document what's
going on - because it's a bit complicated !
Change-Id: Id88ced335b0d2dfd18fb59c9a3dc75571f2a44ef
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Follow through on a comment from 2012: sort the likely subtag array
(in the CLDR update script) and use bsearch to find entries in it.
This simplifies QLocaleXmlReader.likelyMap() slightly, moving the
detection of last entry to LocaleDataWriter.likelySubtags(), but
requires collecting all likely sub-tag mapping pairs (rather than just
passing them through from read to write via generators) in order to
sort them.
Change-Id: Ieb6875ccde1ddbd475ae68c0766a666ec32b7005
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Fresh on the heels of our update to v37, they've released a new version.
No new languages to complicate life, fortunately.
Updated license (year range) and attribution. One test also needed an
update: Catalan's long time format now parenthesizes the zone.
Task-number: QTBUG-87925
Pick-to: 5.15
Change-Id: I54fb9b7f084b5cd019c983c1e3862dc03865a272
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Binary-incompatible change: change the numeric values of QLocale's
Language, Script and Country enums, as encouraged by a comment in the
generator script enumdata.py and clarify documentation around that.
In the process (since I was changing almost every line anyway),
convert the dictionary values from (mutable) lists of length two to
tuples, since they are (and should be) immutable data.
Change-Id: I26222bce45b9f5074b1d81ed70015a75ac34adcd
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Our enumdata.py namings of countries had fallen somewhat out of sync
with CLDR's names. In the process, support including hyphenation in
the unsquashed name, along with spacing. Distinguish, in comments,
between older renamings and those first seen in Qt6.
Change-Id: I91ec444bf35222ab6a9332e389ace19cca0e4fdf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move the repeated List suffix to the __enumTable() helper, where half
the parameter's uses were having to snip it off anyway.
Change-Id: Ia396e87e59ceeb81fc4b0890a86934dc67da10cb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Be up front about using new in all the places where it's created.
Made one of the global statics into a function-local static.
Eliminated a static made redundant by its const sibling.
Made two members const now that they can be.
Change-Id: I46532b3c1e0e62d1f8c84f55494f70cff09d4404
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This means always initializing globalLocaleData from an entry in the
locale_data array, where in principle the fallbackUiLocale() could be
the system locale, which isn't held in the array. However, no actual
implementation of fallbackUiLocale() uses the system locale (nor is it
clear this would work if one did).
Change-Id: Ie1c5ef3e8a97f21e0d82fa2dfb3cf3eb9e4c8840
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Calling systemData() locks a mutex but the tests against its return
are just testing whether some m_data we're looking at is the
&globalLocaleData it's returning; any other m_data points into the
locale_data global array. So bypass the expensive mutex for these
tests and just compare against the pointer systemData() would be
returning.
Thanks to Andreas Buhr <andreas.buhr@qt.io> for the analysis that
showed the need for this.
Task-number: QTBUG-87330
Change-Id: Ib06233773511dc9d532cb4658319b6d589d17b56
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Previously, two calls using the default locale (which has an index in
the locale_data array when it isn't the system locale) neglected to
pass the index and the call for the system locale had no idnex, where
it should really set the index appropriate to its language, script and
country, so that we get appropriate calendar data to go with the
system locale. One other place that handled the default locale also
neglected to revise the index it was using.
Change-Id: I4cc52e2d085a99e61236c91c0ae873b3bde5f11d
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Various uses of uint were simply redundant, now that Language, Script
and Country are ushort-based. Others should in any case have been
quint16 or char32_t.
Change-Id: Id0d0dc2558e1724907907cde56059f70972e824a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Pass a single argument in place of three; and (prepare to) replace
QLocalePrivate::getLangAndCountry(), taking three out parameters, with
QLocaleId::fromName(). Removal of getLangAndCountry() must wait for
removal of linguist's use of it in qttools, which has to wait for this
change to land in qtbase. In the process, change findLocaleIndex()'s
return to int.
Change-Id: I9f5c44c41f2dd1598c53ed5ccb0abddc6b17d21f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Instead of returning a pointer (from which we then have to infer an
index for use in calendar data access), compute the index as primary
and infer the data pointer from it. Also refer to the index as such,
rather than as an offset.
Comments advocating this wanted to dispense with the pointer entirely;
that's not an option, however, due to the system locale having its
data in a separate object, outside the array that contains all the
other locales' data.
Change-Id: I1c60e688229394003e61372dbfc6cfb11086eafa
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The documentation of processEvents states that it processes all
pending events. However, this is not true for the glib backend
and probably was not true for at least a decade.
QEventDispatcherGlib::processEvents(ProcessEventsFlags)
calls "g_main_context_iteration" which is documented
to only process events of highest priority:
https://developer.gnome.org/glib/2.66/glib-The-Main-Event-Loop.html#g-main-context-iteration
Fixes: QTBUG-87307
Task-number: QTBUG-84291
Pick-to: 5.15
Change-Id: I82c6f9dba865bb07f981ad648a128316749682ca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The type is specific about printing, so give it a name in line with
QPageLayout and QPageSize.
As per API review comment, it's not clear why this type should not be a
regular, copyable and movable value type. It stores a list of intervals.
Give it value-type semantics, as an implicitly shared class.
Convert the parse method into a static factory function.
Add a Range type and use it instead of the semantic-free QPair.
Move QPrinter getter into QPagedPainteDevice, make it return a copy
rather than a pointer, and add a setter.
Extend test case to cover all members and more merge cases. Fix bugs
found that way.
Fixes: QTBUG-88113
Change-Id: If17ea4d410d49f16b097e88b7979db5d72add820
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Give QLocaleId matchesAny() and isValid() checks and some acceptance
tests for their use as filters. Give QLocaleData a QLocaleId id().
A few messy pieces of code get easier to read.
In the process, greatly simplify a do-while loop (sacrificing some
pretest-before-loop optimizations - benchmarking shows they made
negligible difference) and change a while loop to match its form,
since it was doing essentially the same iteration and (thus) its
condition was guaranteed true on the first iteration.
Change-Id: I36b1a6ca8a3cf350b3f3abbe75b177e5a7637cd8
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Compare the code->name mappings we're using to the ones CLDR's
common/main/en.xml provides; report discrepancies. Tolerate tags
missing from en.xml if they're known to the locale-inheritance
machinery.
Change-Id: Ibe96c18bf55984a35de3b3644f3586a9f30720b2
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
And check that the result fits.
Change-Id: Iaee1085315559bdffea9400b94b29869621ab7ff
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The set() function sets a given byte in shared memory. Thus,
just take a char, not a QChar.
Change-Id: I6f3d148eb730573070832ddce6f63363408790cf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Trying to locate zstd package configuration prior to use pkg-config.
Define explicit IMPORTED_LOCATION_DEBUG and IMPORTED_LOCATION_RELEASE
in case of pkg-config usage.
Fixes: QTBUG-88091
Change-Id: I3cb86a66fad4e7b78b3d2fcff061508fc25e25a7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use select_library_configurations to select applicable libraries
set for PCRE2.
Fixes: QTBUG-88092
Change-Id: I11e669a0142d53a3c344c86bd1d8eb797df4ba97
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The left border path clip error when border size is odd.
That because borderClip calc path with border with divide 2.
It should be 2.0 that make result to accurately real number.
Pick-to: 5.15
Change-Id: I8c6f358afa4f3c8c9e5b263707ee145f6e5491c0
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When -DFEATURE_schannel=ON, -DFEATURE_ssl=ON, and -DFEATURE_openssl=OFF
cmake configuration would fail.
Fixes: QTBUG-88126
Change-Id: I7325a6c6bc4b9ff448893c7f05b7f46c34eefc1e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
