We need to also load the binary for the application itself.
Task-number: QTBUG-32079
Change-Id: Ic26d5e6d950d6d18aaa54392c3c84b6deaa56c75
Reviewed-by: BogDan Vatra <bogdan@kde.org>
We just pass 1.0 as the scaled density for now, since it shouldn't
make much different to the code being tested.
Task-number: QTBUG-32079
Change-Id: I888c4640e4627f47a2c128d2ce2a41adf4ca3132
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This reverts commit e3fa266623b08e837cb4ccc7fe59da243d03dd27
That commit applied a change at the wrong place in the code.
Change-Id: I21e3045a3af14ad2f90c5fe338815c35a2d27ae6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
qt_ACE_do(".co.uk") was returning an empty string because of the
leading dot. This has always caused issues in KDE code too, where ACE
normalization needs the dot removed, and re-added afterwards.
Change-Id: Id9fcea0333cf55c14d755a86d4bf33a50f194429
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The test currently leaks 2 directories QFileDialogTestDir,
QFileDialogTestDir4SelectFiles in /tmp.
Change-Id: I396f0b069572a680d81206dd0f1ddf606cbbe9e4
Reviewed-by: David Faure (KDE) <faure@kde.org>
Number literals are always interpreted as double. This lead to errors
on platforms that define qreal as float.
Change-Id: I838f690c33bb97e39a2cca2cfd3bdfb9482bc2b2
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Removed the QCursor entry from the list of types
if QT_NO_CURSOR is set.
Change-Id: I6b8e925acedec75ed6e46b2e3fe34d0011667c91
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Flip !Q_OS_IOS conditions to Q_OS_MACX where it seems appropriate,
remove a redundant condition in qtextcodec_p.h.
Change-Id: I21c8c0c490f1eb4a9337a7f2f3e907c125489438
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Only run this test case when the widgets module is present, skip it
otherwise.
Change-Id: I84f48b670b967af3bf0701ceba5a192f33989034
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Setting the buttons in the constructor is a use-case that happens
more often than setting the orientation. Yet, there was a
(Qt::Orientation,QWidget*) constructor, but no
(StandardButtons,QWidget*) one.
This patch adds it.
Change-Id: If6a5c9f7450a388cd77bd93c8dd144b2fdc11847
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Kevin Ottens <kevin.ottens@kdab.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Unit test by Friedemann Kleint <Friedemann.Kleint@digia.com>
Task-number: QTBUG-31569
Change-Id: I526d33d4f88a41f6ac349098476bc45af6c841b0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The issue is already fixed in 5.0 but let's be nice and ensure the issue
won't be reintroduced later.
Task-number: QTBUG-30931
Change-Id: Ia6944acaf6e7217f8d0f1fa75d0e9977db11d892
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Because fonts are bigger on BlackBerry than those assumed when the test was
written, explicitly adjust the font size on this platform.
Change-Id: I6a23c28c2d32edf744dd5de09ea0a97fd5f9b6d6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Some test cases rely on the fact that show() is not fullscreen, which may not
be true for some platforms. Explicitly make use of showNormal() to avoid
full-screen show on these platforms.
Change-Id: Ie62fe21bf0f466c561a27cffda99d0201b4a45af
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Some tests assume that QWindow::show() behaves like
QWindow::showNormal(), which is not true for platforms in which the show is
fullscreen, forcing QWindow::showNormal() to be explicitly called.
Change-Id: Ib5f23a4d01bc6a3a2973f57488996c8c198c45f3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QDateTime.toString() is writing out milliseconds since change
15da0a5af2. Unfortunately this breaks
QDateTime::fromString() with Qt::TextDate which can't handle the new
format.
Fix by making QDateTime::fromString split up seconds and milliseconds
on a period, if any. Now
QDateTime dt = ...;
assert(QDateTime::fromString(dt.toString(), Qt::TextDate) == dt)
works again.
Change-Id: Ibfe9032e357ceaf894e33f3e33affe94f56dbf5c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
During a call to QDir::mkpath(), the same path could be created
by another process, in which case the OS mkdir will fail with EEXIST.
But the docs for mkpath() state that it's not an error if it
already exists, whereas for mkdir() it is an error. So
QFileSystemEngine::createDirectory should accept the EEXIST error
silently if it occurs while creating the sequence of parent directories
and the final leaf directory, but should fail if EEXIST happens when
it was called from QDir::mkdir(), which is when the createParents
parameter is false. We assume the operating system mkdir() and
CreateDirectory() are atomic, so there should be no race condition
in QDir::mkdir(). It's not necessary for mkpath() to call stat()
at each level, only to check whether an existing entry is a directory
or a file. Also added to the autotest to verify that if the
path is an existing file, creating a dir with the same name will
fail in either mkdir or mkpath.
Task-number: QTBUG-30046
Change-Id: I926352f10654fdf3b322c8685bb85ad8b8844874
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
There is a mismatch how QML and C++ converts QJsonValue. This patch
unifies conversions by adding QJsonValue support in QVariant::convert().
Change-Id: I8a1db3d77c517945ef48064b4b66ba03aa4f2fd0
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Initialize undockedGeometry to roughly the current position.
Task-number: QTBUG-31044
Change-Id: I03cbe280d1215bb58ab721b60e29b45359cde76d
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
this works with -no-gui, and doesn't interfere with our upcoming ANGLE
hackery.
Change-Id: I2985cc0acd1fbf185b8967ffe58606b1b7dd9d1e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
BlackBerry OS does not allow for explicitly controlling the locale through the
"LANG" environment variable. Locale is controlled by the underlying PPS
Service instead.
Change-Id: I22154e39f81a9467ad7fdb90a042396390398b1b
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Mehdi Fekari <mfekari@blackberry.com>
In Qt 5, we declared that throwing from event handlers is undefined
behavior. So stop testing this.
We will try our best to capture and pass along std::bad_alloc, but even
that might not work, depending on compiler settings. In particular,
after the upgrade to MinGW/GCC 4.8 with DW2, this test stopped working.
Task-number: QTBUG-31615
Change-Id: Ibf5fb2ce0c48b983549096bf7aac434b6ed3ac2e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
qt_nameprep is tested by tst_qurlinternal. We just need to be sure that
QUrl handles them correctly.
Change-Id: Ic563004870d2cf2fa7a31ce49fff7280d5ffb5f3
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
warning C4804: '<=' : unsafe use of type 'bool' in operation
Remove outer loop and replace ugly ROW_NAME macro by
inline function.
Change-Id: Id7e4ef047adaf8017b8c21621d19c151993cc6dd
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Edge case: a > that should have been >=. Without it, we never ran the
rest of the IDN nameprepping.
Change-Id: I2276d660de3a70d0c561bb18816820d9a0f47e77
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
RFC 3454 says about prohibited characters (section 2, "Preparation
Overview"):
3) Prohibit -- Check for any characters that are not allowed in the
output. If any are found, return an error. This is described in
section 5.
In other words, we mustn't simply strip the output of prohibited
characters. We must generate an error if they are present. We do that by
clearing the data.
We already had tests for prohibited output, but they were
indistinguishable from being stripped. So instead add some extra
characters so that we can tell whether the label was cleared.
Change-Id: I2d95217c27be5e2d54deed0036cb009e3b7f4886
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Because tests are usually run as root on some setups, it does not
make sense to test for the right permissions of a readonly file.
Change-Id: I484f88722d3a9ce7123edc0fb57acae528fa194e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Update the test code to match the current Qt idiom for finding test data (and
fix it on QNX).
Change-Id: I63e7c97b717722e4e6859a12f329d56b26584ce6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This only marks tst_qopengl as insignificant on Windows 7 32bit
with the Angle configuration.
Task-number: QTBUG-31611
Change-Id: I1876b6fdc32fef93edf34c2bd61d03cc9ba11135
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
