Remove unnecessary version in tests/manual since they are always true in
the CMake port where it's impossible to have a QtVersion less than 6.0.
Change-Id: I26a13117a8c2e032a9cc70ca0f040122cbf79886
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The following enumerations were obsolete for a log time but not marked
as deprecated:
- WA_NoBackground
- WA_MacNoClickThrough
- WA_MacBrushedMetal
- WA_MacMetalStyle
- WA_MSWindowsUseDirect3D
- WA_MacFrameworkScaled
- AA_MSWindowsUseDirect3DByDefault
- AA_X11InitThreads
- ImMicroFocus
mark them as deprecated and remove the usage inside QtBase so they can
be removed with Qt6
Change-Id: Ia087a7e1d0ff1945286895be6425a6cceaa483fb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This is done by adding a QWindowPrivate::allowsClickThrough() function,
so this could easily be adapted later on if desired for other
platforms.
Fixes: QTBUG-41126
Change-Id: I1157e5e7e7667ff11d1a5d21b3ce8c4b13202272
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Since we moved the menu items validation and target/action to
QNSView (thus relying on the responder chain), we need to take
care of case when the applications that doesn't have any window
open. By adding similar methods to QCocoaApplicationDelegate,
the last responder, we ensure the menu items will be validated
and will trigger properly. This is particularly necessary for
dock menu items, which live separately from any top-level widget.
Dock menu added to Menurama which won't quit when its last window
is closed. This way we can test that dock menu items will trigger
in the absence of any window.
Change-Id: I56d864eb9da1f8dd5adb2a3b6c3dd5304c723117
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
- Move ivars into @implementation
- Use instancetype where applicable
- Use dot notation for property access
- Use subscript operator for dictionaries and arrays
- Format selectors consistently
- Use proper style for init methods
- Use generics instead of void pointers where possible
- Use "range for" loops instead of indexing
- Replace or replace IBAction/IBOutlet with void
Change-Id: I1667812a51d4dfe44ae80fe337cb1f4bc9699d92
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Instead of waiting for the menu delegate to update each item,
we can attach an NSMenu to its NSMenuItem as soon as we update
the current window's menubar. This is safe to do because we
know that this is going to be the main menubar right after, so
we're not orphaning any NSMenuItem from its NSMenu at the wrong
moment.
By doing this, we also ensure that all menus from the active
menubar are reachable by the key-equivalent dispatching logic,
even before we display the actual menu.
This was shown in BigMenuCreator where, under the menubar's ASP
and SAP menus, all A*S submenus would be disabled. Furthermore,
on the same menus, SAP would show the same issue.
Added test in Menurama as well.
Change-Id: If6e7311072e6b53ad1cbced73623d1832aa0df8e
Task-number: QTBUG-57076
Task-number: QTBUG-63712
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Child QWindows (or in the case of QWindows embedded in native applications:
top level QWindows where the corresponding NSView is a child of another
view, so not being the contentView of its window), still need some of the
NSWindow notifications to e.g. update their exposed state when the window
becomes visible.
We make sure to send the notification to all QCococaWindow children of
the relevant NSWindow, and let each callback decide if it should only
apply to content views.
This fixes an issue where a QWindow would never be exposed if the window
was a child NSView and added to a NSWindow that was yet to be shown.
Change-Id: I7f7df8bc5f4ca3ac553a2c146f8c3229b197c059
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
There's no need for us to walk our own ancestor chain to figure out which
cursor to set. AppKit will automatically call cursorUpdate: on the view
that would be the hitTest target of the current mouse position, and by
falling back to super when no cursor is set for the current view, we
automatically get the behavior that effectiveWindowCursor tried to solve.
In addition, it solves the case of applyEffectiveWindowCursor applying
the arrowCursor when no cursor was set, which would mean that if any
native parent view of our view _did_ have a cursor set, we would not
fall back to the native view's cursor, but instead override it with
the arrow cursor. Following the responder chain gives the correct
behavior in this case.
Unfortunately, due to rdar://34183708, if a subview of one of our
views uses the legacy cursorRect approach to cursor management, the
cursor will not be reset back to our cursor via cursorUpdate: when
leaving the child and entering the parent view (our view). Moving
our implementation over to the legacy API would solve this problem,
but just propagate it to native parent views of our views, which
could potentially use NSTrackingAreas, and would not have _their_
cursors re-set.
Change-Id: Id20cc03136f0b1d4b9120750fe63ddc455363aaf
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
- Add view to contentView, to allow checking parent view interaction
- Render via requestUpdate instead of manual timer
- Add two windows to check subview interaction
Change-Id: Ib028e62f585d45e42c0429e69ea6f45c8a90fe54
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Calling -[NSMenu update] every time we add a new item can result in
a quadratic behavior since the function itself will iterate over all
the items in the menu. We solve this by using a 0-timer which will
trigger the call to update the next time the event loop spins.
Menurama manual test updated.
Change-Id: Ic155d364515cc93eb81b1c8085c8e44c93799954
Task-number: QTBUG-62396
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When a menu item's enabled state changes after
-[QCocoaMenuDelegate menuWillOpen:] is invoked, i.e.,
during or after QMenu::aboutToShow() is emitted, that
state change may not be taken into account. This is
because the automatic menu validation, upon which Qt
relies, is not made aware of any such change.
By calling -[NSMenu update] when syncing the QPA menu
item, we induce Cocoa to invoke -[QCocoaMenuDelegate
validateMenuItem:] and ensure that previously synced
items, whose state may have changed, will be properly
updated. This, however, has a small side effect, namely
that menu-holding items will also go through the automatic
menu enabling path and may appear disabled since, until
now, they were not properly configured. In order to solve
this, we set the action on those items as well, and make
sure that both of QCocoaMenuDelegate's relevant methods,
validateMenuItem: and itemFired:, properly process
menu-holding items.
Menurama manual test updated accordingly.
Change-Id: I62f955538b8be09b8494ea0ce87fca7910148d38
Task-number: QTBUG-56850
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This leaves a clearer separation between the foreign-window and non-foreign
window use-cases, where a single QCococaWindow can only be in one mode,
which is determined in the constructor and doesn't change after that.
There are no source or binary compatibility guarantees for the QPA classes,
meaning the helper function in QPlatformNativeInterface can be removed.
Change-Id: I3232aedca1d98c49a8f54e16750832187f9dc69a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This manual test pretends to be a modest safeguard
against QMenu related regressions on macOS. It takes
a slightly different approach than the existing menus
manual test, tracking observed regressions instead of
providing extensive coverage (though this may change
in the future).
These regressions are listed as task numbers below,
most of them arising from the now infamous change,
09acf326db QCocoaMenu: Decouple NSMenuItem from NSMenu
So, from now on, please run this and the menus manual
tests and look for regressions every time you make a
change regarding QCocoaMenu and related. And, if you're
fixing a regression, add the regression example to the
Menurama manual test.
Task-number: QTBUG-52931
Task-number: QTBUG-53085
Task-number: QTBUG-53251
Task-number: QTBUG-54633
Task-number: QTBUG-54637
Task-number: QTBUG-54698
Task-number: QTBUG-55121
Change-Id: I276e916dcdf00f1a44faf64d87050bc3a037a3b5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Cocoa is basically just AppKit + CoreData. Since we do not use CoreData
in Qt, there is no reason to link to it or (transitively) import its
headers.
This is just a mechanical replacement of -framework Cocoa with
-framework AppKit and <Cocoa/Cocoa.h> with <AppKit/AppKit.h>
Change-Id: Ibcfc8a03c0ddff27a67fbc87dd7bd58a4b648956
Reviewed-by: Mika Lindqvist <postmaster@raasu.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Focus the test on embedding QWindow: Remove the
NSToolBar code. Use standard NSApplication startup
code. Use winId() to access the NSView instead of
QPlatformNativeInterface (which is gui-private).
Rename Window -> RasterWindow.
Change-Id: Ie98cb73020d2721743bb665b89b17f07f2bf984b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
On OS X the application icon can be changed at runtime, so this adds a way
to set this via the QPlatformIntegration.
[ChangeLog][OS X] QApplication::setWindowIcon now changes the icon for the
application in the dock.
Task-number: QTBUG-43999
Change-Id: Ice298c0bd52f10f4866f37c6d3f20cf5419b7a1b
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
We need to track the active popup globally, having
parent windows track child popups is not sufficient
since there may be one or more intermediate windows
in between the event receiving window and popup window.
Add API to QOCocoaIntegration for tracking the global
popup window and use it instead of the per-window
tracking. Make sure to only close popups on clicks
outside the popup only. Add code to QNSView::handleMouseEvent
that redirects mouse events to the active popup.
Add manual test.
Change-Id: Ia3e3fd42d8fddf5c69f0c6879b333ca544521f61
Task-number: QTBUG-43464
Task-number: QTBUG-31937
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
The Overall goal is to make it possible to use correctly-
sized pixmaps in a predictable way, while still doing
something reasonable with small and large pixmaps.
(The recommended pixmap height is up to 18 points.)
Enable use of rectangular icons by selecting pixmaps
based on pixmap height.
Draw a low-resolution pixmap on retina displays if
there is no high-resolution pixmap available. Scale
large pixmaps to fit the available menu bar area.
Add a manual-test with various pixmap sizes
Task-number: QTBUG-33441
Change-Id: I1926181fe27cae526bae58022df3240bae9f8ac8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Make top-level windows generate enter/leave events
for sub-windows. Keep track of the current "under mouse"
window in mouseMoved and send EnterLeave events when
it changes.
mouseEntered/mouseExited handles enters and leaves
from the top-level window.
Add tests/manual/cocoa/nativewidgets.
Task-number: QTBUG-27550
Task-number: QTBUG-29751
Change-Id: If4b9f9e0f39d9fb05fdab45a100ffdcf107965ad
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Fixed menu handling on Cocoa so if a menu is enabled/disabled or made
visible or not then it will keep this in sync with the appropriate
native menu entry.
Change-Id: If269185fcf065fb1b2f60d6ef8c27c107eb4509f
Reviewed-by: Pasi Matilainen <pasi.matilainen@digia.com>
Reviewed-by: James Turner <james.turner@kdab.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Added a test for QMacCocoaViewContainer which will enable the testing
of the fixes coming
Change-Id: I73e9540bc58411634f0da7d398eca4b7ffafba8e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Implement the QPA platform menu interface for Cocoa,
including native menubar support and merging with the
predefined menus created from the bundled .nib. Cleanup
code previously used to maintain the menus, and add
a manual test of the menus code.
Change-Id: Ia99267ddb6485e18e05c540eb32c5aee6cbb85db
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Add a toplevel manual.pro and other .pro-files to build them and
fix the build.
Change-Id: Ibc98a27b39dd1304edfa8a6894d62e77ce7ef387
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Support pixel-based deltas as well as sending
dx and dy values in the same event. Keep source and
behavior compatibility with Qt 4.
New API:
QPoint pixelDelta() const
QPoint angleDelta() const
Deprecate delta() and orientation().
Both pixel-based deltas and combined updates are
necessary for smooth trackpad-based scrolling on
OS X.
Qt 4 compatible behavior is achieved by sending an
extra wheel event in cases where the initial event
has a combined dx and dy update. This extra event
sends dx in delta() and orientation(), with pixelDelta()
and angleDelta() set to null.
Modify the Cocoa implementation to provide pixel
deltas. It is expected that not all platforms can
provide these. Angle deltas will always be available.
Change-Id: I20c10f0df338ddcd6a3f7a4d40949ed5ae3b4795
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
