GTK_WIDGET_TOPLEVEL was deprecated in 2.20 and no longer available in
gtk 3. gtk_widget_is_toplevel() was introduced as a replacement in gtk
2.18 => make that the minimum requirement.
Change-Id: Ie5d2d8bd824af916a9764c66a7046f07a77b1748
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Change-Id: Id0137400f18c8dfe7be7ca44670c16615401d424
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Peter Hartmann <phartmann@rim.com>
stack-protector-strong gives performance benefits over
stack-protector-all and is still checking more than -stack-protector,
so seems to be a good middle way and we want to use it when it is
there.
The -shared option for the compiler (not the linker) prevents a
RIM internal version of qcc from forcing -fPIE, and should not harm
in general when set.
In addition, add a method "compilerSupportsFlag" for Windows as is
present in the Unix configure script.
Change-Id: Iba300e9cb82f34043e7b36f8e45287a1aed2a1a5
Original-patch-by: Greg Bentz
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
The default is the current behaviour: strip on installing release, no
strip on installing debug. This option does not change the
installation of debug builds because qmake does not support that.
Change-Id: Ic208d5ffe860d5f1ee1cafdc944e12001673d33f
Reviewed-by: Davide Pesavento <davidepesa@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
When qmake is used to get PKG_CONFIG, core and gui are not
available. This motivates CONFIG-=qt. In fact, we don't need any
features for this job.
Change-Id: Id247054d43c50f6aeb62db7585c3e90f57aa36a1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The value of PKG_CONFIG might depend on device options.
For example, "-device-option PKG_CONFIG" might be used with configure
or a mkspec might prefix PKG_CONFIG with CROSS_COMPILE which is
specified as a device option.
The shell functions of configure for parsing mkspecs do not take
device options into account, but qmake is pretty good at it now.
Change-Id: I1c9558e550c48e8441ebdac34b82066473c2ce3a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It is necessary to use the n9 device file for now in scratchbox or/and on the
community open build service because the maemo platform mkspecs file assumes
that a cross-toolchain is used all the time. If no platform file is used, then
for instance certain plugins may not be built in general. There is currently an
ongoing issue with the meego plugin for context management in the Harmattan
components project. That is currently not built due to this issue, so no
orientation works in those applications.
The nice solution would be to make the maemo platform file work with cross and
native toolchains as well, but that requires a decent amount of investigation
and work. Thereby, the scope is extended this way for now.
Change-Id: I172c7d152bdbb2db279526d9fd1ca5648d0cd0a9
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Also check for c++11 support in configure.exe (which is also used by MinGW builds).
The c++11 check is therefore moved from 'unix' to 'common' directory.
Change-Id: I082848f032c2770e52e34f331b83820f395c06b6
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Yuchen Deng <loaden@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This partially reverts commit
07a978d3d4.
Despite what the commit message said, pkg-config previously worked
and was useful, particularly for static Qt. Qt itself even installs
its own .pc files.
Note: The mkspec win32-g++-cross had a PKG_CONFIG definition to avoid
using the pkg-config installation on the build machine.
Change-Id: Ia4a8d18cd57f74a00bdb9b6a171d20151978a9cc
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Peter Kümmel <syntheticpp@gmx.net>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
the bootstrap does not need CamelCase includes, deprecated headers and
whatnot, so just don't do it. the full thing will be run on qtbase by
qmake.
Change-Id: Idffdd4750a73574c8c32ee75d00080abfe37e03c
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
... provided perl is available.
configure.exe already does that, and there is no reason not to.
Change-Id: If398864697fcfbe4545248cec33e70a1ec4a29a3
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it needs no special env variables any more
Change-Id: I60a7ab6eabb9280b02cd510418c0842d05fc1306
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is where the syncqt calls for all modules happen
Change-Id: I544e5fa6950c2babe56d78f5543d2c3262016687
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
DEPENDPATH is hard to get right, and consequently most projects have
broken dependencies.
the easy way out is just adding everying in INCLUDEPATH to DEPENDPATH,
like we do ourselves in qt. if somebody wants to optimize, he can
opt-out.
Change-Id: I7fb56010728fd2b0d2b7d4d26386f366d414ba04
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
And only use the QT_CONFIG,egl syntax in eglconvenience
Change-Id: I81c0602334714f4b27a7e90e7b5859c989e6bd63
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
The Mac OS X SDK is the only thing that variable is
used for, so give it a name that better fits its use.
Change-Id: Ifd9866bc19edda0e9f0bcb17270eb26a8849401e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Not every MIPS SoC has the DSP extensions, auto-detect them by using
builtin GCC functions. Check for the DSP macros and add the result
for rev1 and rev2 to the cpufeatures.
Change-Id: I3d6c950f170f102514c43b349f9a23ee796d801a
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The XCB platform plugin requires several XCB libraries to work. Without
this fix, we get the build error in compileTest only, which is hard to
check.
Change-Id: I6b599f5ad32661e9dc01db11705d702920350cfa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
standard paths should never be added to compiler/linker lines, as they
are likely to mess up the lookup order.
pkg-config does that filtering for us, but the home-grown config tools
don't, so we need to take care of it.
configure.exe does not have such auto-detection, so the change is not
necessary there.
Task-number: QTBUG-26850
Change-Id: I2f523d5cffb27c3d0a16cdef6ca8a4877c9983c0
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Mitch Curtis <mitch.curtis@nokia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
This reduces dramatically the command-line for compiling Qt sources.
These are private macros, only to be used by Qt's own modules, so the
compiler setting is either the same or, possibly, better. In other
words, in the worst case, when compiling a module with a better
compiler than for qtbase, such module might not enable all the
functionality it could otherwise do.
If we switch to a buildsystem that can support this properly in the
future, these macros should be removed.
Change-Id: I71f2d12ec98c9dd40eaab9de4a17446bd1066020
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
hard-coding it in unix.conf was no particularly good idea for hopefully
obvious reasons.
the windows version is so far just a stub that does what the makespecs
hard-coded - more doesn't seem worth the effort. the guys interested in
x-building may want to rectify it at some point, but it's not going to
be easy.
Change-Id: I8fedd841a8416f8c0c57018752eae9510b5d00d0
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This is prompted by the fact that QMAKE_LIBDIR_FLAGS is no longer
honoured by qmake, so we need to use LIBS. It didn't make much sense
to have the flags separate anyway...
Change-Id: Iaec4d58f9dbac25755bbc3bad7550e03edb5332b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this cuts down the enormous duplication of identical command line args
passed to compile.test.
this necessitates the addition of a -config parameter to compile.test,
as QMAKE_CONFIG needs to be extended in some cases.
Change-Id: I677b2fea4a407b9e4395e70a25e4e349efb0a946
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a plugin that bridges the QAccessible world
to AT-SPI 2 on Linux.
Change-Id: I7af22621ee6a3cefc723b137b7f227a611cf6641
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
a module's project file may set MODULE_INSTALL_LIBS before loading
qt_module.prf to have an alternative RPATH linked into the users of that
module.
this is relevant only for linking against non-installed -prefix builds
of that module, as otherwise .libs from the module's pri file is used
for rpath.
Change-Id: Ib240e748cf130a71a5991dc643c368a983092ead
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This fixes a build failure that happens when Qt is configured with
-no-libudev, as reported at https://bugs.gentoo.org/show_bug.cgi?id=430292
Change-Id: I924f023505ab57cca5994f2fd5ff2f8308e61617
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When using [ ] for tests in shell scripts, the ending ] must be a
separate parameter. Otherwise, it won't work. configure was reporting:
configure:5918: ']' expected
Change-Id: I38a843356ee0feb97edb8692a828306821045c77
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
configure will now run qmake without -recursive, as on modern systems
one can get a lot more out of parallelization done by make, which qmake
cannot do.
use -fully-process to get back the old behavior. -dont-process is
unchanged.
Change-Id: I2874321a963175463ae8992f3ab2b01bc13c9922
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
they are an unreadable and unmaintainable mess. the options are properly
documented below.
Change-Id: If2ec683fb7c3740b19798979f8a1f9cd8d84f457
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This option is important if you want to use configure's
and qmake's -sysroot (e.g. PKG_CONFIG settings, device-files),
but the toolchain (in combination with the rootfs)
is not able to handle gcc's --sysroot.
One known case is freescale's ltib setup where the toolchain
itself comes with all the essential files (e.g. crt1.o),
while the rootfs has none of those files, so gcc's
--sysroot can't be used. The rootfs on the other hand contains
all kinds of "less important" files/packages (e.g. libdbus).
For those "less important" files/packages Qt needs pkg-config
to be able to include/link properly. Therefore one needs
configures -sysroot without gcc's --sysroot.
Change-Id: Iaec9b07012f2945f3ecb3ced0ed95176721b5ecd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The arch.test script is now using SDK settings passed to it.
If you install Xcode without the "UNIX Development" option, this
is essential to let the compiler find standard headers and let
the test program compile successfully.
In addition, let configure pass the SDK settings given on the
command line to the arch.test script.
Change-Id: I49601d3068d83a71e21fdbac287857f2b7abedd1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In systems where no pkgconfig is available, such as QNX, we set
QT_LFLAGS_SQLITE to the default values.
Change-Id: I24edd589ce7baf2614480a91842ca756ead39463
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The code is exactly the same as what is already done for DirectFB.
Change-Id: I3b84e67a3e999f692da4110f3ac9c82d98b0637c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Tools for each module should be enabled by default.
Prior to qt_parts.prf, they have been enabled by default, but only by
accident - the value of QT_BUILD_PARTS with respect to 'tools' was
generally not respected.
Change-Id: Icd49d6128d4050ff1c865967a563e9ab88c5a3a2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
that way it is actually possible to add additional parts from the qmake
command line.
Change-Id: I42e0b58424292cebafb57538a879204d370397bb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
otherwise we get lots of nasty warning messages about missing pri files.
it is arguable whether it is a good idea to do that, but we preserve
mkspecs/modules, too, and the previously built libraries don't just
vanish, either.
Change-Id: Ieded8d8858f1b0135bc3bea894b4a676024ac8ca
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this makes it unnecessary to dump qmakespec to .qmake.cache and
qmodule.pri.
Task-number: QTBUG-22700
Change-Id: I678c7ee7df2512184b9cd06d7a3be8bbd0b0da15
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
modules other than qtbase also need it.
the windows configure already does it that way.
Change-Id: I9adb469f7a0726663b7939e80d8be1e83a6d12d3
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
this will fail now even on unix (and wouldn't have ever worked on
windows), as the full spec name is known only after reading the spec,
and qconfig.pri is read from inside the spec.
matching on the host_build flag is cleaner anyway.
Change-Id: I7da144e89ab3db0fad942d755d8cb0a0f3b85588
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Donald Carr <sirspudd@gmail.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
pkg-config returns glesv2 build flags, which are parsed into a few
variables. However, extra spaces get included in these variables and
quoted, which makes includes paths not work.
This problem can only be hit, if you do not have GL ES 2 headers
installed system-wide, but you do have installed into $prefix, and
pkg-config configured to return the configuration for $prefix. Even
though pkg-config returns correct paths, extra space gets included.
Fix it by parsing the strings returned by pkg-config just like a shell
would parse a command line. pkg-config escapes e.g. spaces, so those
escape sequences need to be interpreted, while doing word-splitting. The
result is a quoted list, as expected in the qmake files.
Done-with: Pekka Paalanen <ppaalanen@gmail.com>
Change-Id: I0593ef7e0606ac5ea80da046e45f86806206951a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The SXE feature was used with Qtopia but is long gone. Clean it up.
Change-Id: I55fba97b6382300ba63e94f3a6c415227f571e37
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The Maemo-specific function have been renamed a bit to prevent them
clashing with the more generic stuff.
Task-number: QTBUG-25865
Change-Id: Id55693159e15d5a0c679546eb48308feb48acac9
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Up until now, we had a mess of different macros used for building
DLLs, for building shared libraries on Unix systems and for building
static libraries. Some of the macros were contradictory and did not
work. From now on, there shall be only:
- QT_STATIC: indicates that it's a static Qt build and the export
macros should expand to empty
- QT_SHARED: indicates that it's a shared / dynamic Qt build and the
export macros should expand to Q_DECL_EXPORT or Q_DECL_IMPORT,
depending on whether the macro corresponds to the current module
being built (the QT_BUILD_XXXX_LIB macro comes from the module's
.pro file)
QT_BOOTSTRAPPED implies QT_STATIC since the bootstrapped tools link
statically to some source code.
QT_STATIC is recorded in qconfig.h by configure when Qt is configured
for static builds. Nothing is recorded for a shared / dynamic build,
so QT_SHARED is implied if nothing is defined. This allows for the
existence of a static_and_shared build: with nothing recorded,
defining QT_STATIC before qglobal.h causes the export macros to be
that of the static form. Linking to the static libraries is out of the
scope of this change (something for the buildsystem and linker to
figure out).
From this commit on, the proper way of declaring the export macros for
a module called QtFoo is:
#ifndef QT_STATIC
# ifdef QT_BUILD_FOO_LIB
# define Q_FOO_EXPORT Q_DECL_EXPORT
# else
# define Q_FOO_EXPORT Q_DECL_IMPORT
# endif
#else
# define Q_FOO_EXPORT
#endif
The type of the Qt build is recorded in QT_CONFIG (in qconfig.pri) so
all Qt modules build by default the same type of library. The keywords
are "static" and "shared", used in both QT_CONFIG and CONFIG. The
previous keyword of "staticlib" is deprecated and should not be used.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-April/003172.html
Change-Id: I127896607794795b681c98d08467efd8af49bcf3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
they are equivalent to QT_INSTALL_(HEADERS|LIBS)/get.
Change-Id: Ic4b47f3ca7db55785b96f19020a2fa020a8d25bd
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
properties are now split into a write location $$[FOO] and a read
location $$[FOO/get]. the write locations are hard-coded and configurable
via qt.conf/Paths as before, while the read locations are configured via
qt.conf/EffectivePaths.
this finally provides a clean solution to the problem that during the qt
build itself tools and libraries need to be taken from somewhere else
than they are installed to.
Change-Id: I956c43bd082afd465e690fe75d0bee3c2c0f7c25
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
it only serves to create merge conflicts. the treatment is the same as
for "unclassified" options anyway (they ignore the value, so it can be
"yes" just as well).
Change-Id: I9a75769338b4dc1f58493f1a1f1dd2c2e895290a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
we now simply call qmake -r, which is also what we do under windows.
-fast mode is retained for examples and tests, though with moderately
modified semantics (i couldn't be bothered to decipher what the old ones
were supposed to be).
Change-Id: Id2c2d2bed9c8d52ac42f31b388bffc34f4649650
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't mess with the qmake cmdline args any more.
Change-Id: I399d87145d31d25e29951b6acd96387a3c7282f0
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
when qmake runs into the new option(host_build) command, it will restart
the project evaluation with a host spec.
the new default host spec is called default-host (gasp!). it is
overridden with the pre-exising -spec / -platform option, while the new
-xspec / -xplatform option overrides the pre-existing default spec.
specifying -spec but not -xspec will set the xspec, too, so the behavior
is backwards-compatible. same for the XQMAKESPEC override read from
.qmake.cache and the environment variable.
the cleaner solution would be adding -hostspec, to be symmetrical with
the override semantics, but that would deviate from configure in turn.
Change-Id: I4297c873780af16ab7928421b434ce0f1d3820da
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This solved QTBUG-26111 in which qtjsbackend gets built with an
incomplete framework on Mac OSX. This was traced back to commit
6a6fd56e66 which moved QMAKE_CONFIG
values from .qmake.cache to mkspecs/qmodule.pri. Since qtjsbackend
contains config tests it creates its own .qmake.cache which was
previously masking this issue.
QMAKE_CONFIG incorrectly contained debug for debug_and_release builds
even though debug and release are already present in the CONFIG variable
in mkspecs/qconfig.pri. The changes to configure prevent CONFIG in
qmodule.pri from containing debug and release variables and ensure
that QT_CONFIG contains build_all and debug_and_release if appropriate.
Configure.app is also adjusted to match this behaviour.
The other part of the change is to qt_module_config.prf and
qt_plugin.prf. These changes take care of populating CONFIG with
the appropriate debug_and_release and build_all variables depending
upon what is present in QT_CONFIG. This ensures that the Qt modules
and plugins get built with the same configuration as qtbase.
The special handling for the qcocoa QPA plugin ensures that it is
built in release mode only to preserve the behaviour introduced by
commit 5603f94eaa.
Task-number: QTBUG-26111
Change-Id: I6f65aba50709e1b2431b8b4411ff30a06f7d8aed
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
$VAL just happens to work in resolveDeviceMkspec because it is
set in the parent shell environment when the function is called.
Change-Id: I67350f2a9e790cc7eca2a73ef6a4a0d7f09b8d3c
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Follow-up to 0074cc5d34.
The configure script can be used for cross-building for Windows on
unix.
Change-Id: Ie7f9d0ff308ad5763cdf7b2664fa255e89bd5013
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
This is the first step in supporting these checks on Windows.
Change-Id: I77cfd46bd733161ad2e52c2f76a6354b95ff737d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This allows us to have different flags for the compilers for
supporting the same feature. For example, the official flag in GCC to
support AVX2 is -mavx2, but ICC does not support it (yet), requiring
-march=core-avx2 or -xCORE-AVX2. That flag, instead, enables support
for all the features that the "Core-AVX2" processor (codename Haswell)
will support. And clearly, the MSVC flags are different.
Change-Id: I33b6d8617520925e807747180a8dbaafd79b7a9a
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
PLATFORMS is unused. Also remove the loop that printed all the
PLATFORMS when the mkspec couldn't be autodetected. Even if the
PLATFORMS variable was moved up, it wouldn't work anyway since
it detects files and not directories.
Change-Id: Id483c431a179fb01fcf680538e28c81763bc0b90
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
EGLFS has a hard dependency on evdev, so don't compile it when
evdev is not present.
This also removes the check that disabled EGLFS specifically for QNX.
Since QNX doesn't have evdev, EGLFS will get disabled automatically.
Change-Id: I9fdb364b2eff9b370fa238609a8f98af6ccb7f7b
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
XPLATFORM_QNX was never explicitly set, yet the tests which evaluate it
assume that it is.
Change-Id: If97d2ee1f4432ada0c68e36348bf5bec85f94e43
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Commit 2a1b50d67c introduced a dependency
on evdev for eglfs which QNX does not provide. QNX also has a dedicated
QPA plugin so the eglfs plugin is not needed there.
It is not possible to use the -device configure defaults approach as
it is not cross-platform.
Change-Id: I2d151f16cf1a9576a0b0b528f0e9c17834c66e91
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Enabling support for C++11 adds CONFIG+=c++11 to the Qt build. Projects
using Qt can check for C++11 support using contains(QT_CONFIG, c++11) in
their .pr[iof] files.
The QMAKE_CXXFLAGS_CXX11 and QMAKE_LFLAGS_CXX11 qmake varibles contain
any arguments the compiler needs to enable C++11. CONFIG+=c++11 adds
these arguments to the build.
Support for clang, g++, and the Intel C++ Compiler for Linux are
included in this commit.
Change-Id: Id77f86d7ad4d5c740b890446a40b105879a0d327
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Fontconfig has no X11 dependency and is of broader use to us than the X11
context. The test should also disambiguate whether fontconfig support is
successfully detected or not.
This change also removes a false X11 dependency from the freetype test.
Change-Id: I68a596aa06f614a64163772fe29a09edba119a81
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
This information is required by qmake when cross compiling for Debian based
multi-arch devices in order to adequately resolve system libraries and
pkg-config information.
Change-Id: If96e677ab27c6f0453889c8f7cc43bdb9016f8b6
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this is needed to correctly resolve the compiler (cf. $$CROSS_COMPILE)
Change-Id: Iaf7266ae464c15e8483780dcf9c970212630a93b
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
We already do this for -I and -L compiler flags, but not -D.
This caused configure tests to give incorrect results in some cases.
Task-number: QTBUG-25963
Task-number: QTQAINFRA-523
Change-Id: Ib270a1dc67759e36bc439e80ab8136a64c405d26
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Instead of saving the ability of the compiler to produce SSE2, AVX,
Neon, etc. code in .qmake.cache (Unix) or qconfig.pri (Windows), move
everything to qmodule.pri. Accordingly, move the DEFINES += settings
to qt_module.prf instead of qt.prf.
This allows us to re-use these settings in other Qt modules (other
than qtbase), if necessary. Though currently the extra compiler
definitions are found only in src/gui/gui.pro. They can be moved
elsewhere when it becomes necessary.
As a side-effect of this change, some other flags are moved from
.qmake.cache to qmodule.pri (on Unix). The flags that are getting
moved should probably be moved anyway.
Change-Id: Ibc3ab0111e148d81870772f9357273660aa93417
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The configure script uses the bash $"..." string internationalization
syntax; this generates an error in other shells.
Since this feature is only used in one place it is likely a typo.
Change-Id: I076a785c3901b04175b8669e32c55989385720e3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
If the system's compiler has extra features on top of the base
settings enabled or if the mkspec or $CXXFLAGS variable included some,
record them.
This will allow us to choose whether or not to use our own special
compilers, based on whether the system default compiler contains it or
not.
Change-Id: I87cada9fab4cfa58846a831d0a7c7b50d8fa87fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
For the Unix part, this now obeys the -v option, printing the full
command-line it used to compile, allowing testers to identify why
something went wrong.
Unfortunately, it requires a full compilation cycle, instead of just
preprocessing. Just one more among the many on Unix, but maybe a
noticeable slow-down on Windows.
Change-Id: I654b70d99887e04c96731a5b91be9ad555e4d8fe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
sometimes it pays off to actually check where variables are used ...
Change-Id: Ia91c89cb963ace50f432c54ffe5f57366ccd5603
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Qt's configure allows for spaces between an option and its
argument. This patch brings -l in line with -L et al.
Change-Id: Iea5c78dc06f69c21b7419fd9fa73c52ae1cea18f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
result was never returned by resolveDeviceMkspec
Change-Id: Ibd2f647e5524cdc9dbf4ea06f7b815f9dcc43212
Reviewed-by: Andy Nichols <andy.nichols@nokia.com>
Specifying -device linux-amlogic-8726M-g++ is error prone. With this
change, one can specify any substring of the mkspec names under
devices/ and the first one will be picked.
Change-Id: I7c4522fdaefe4a11e9292f7831075aa766a62c0b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
In at least one case found in our testfarm, the compiler runs into an
ICE (Internal Compiler Error) compiling the new AVX code. The error it
reported was:
fatal error: error in backend: Cannot select: 0x7fbf1aa42210: f64 = sint_to_fp 0x7fbf1aa88a10 [ORD=1936] [ID=37]
0x7fbf1aa88a10: i32,ch = CopyFromReg 0x7fbf19538768, 0x7fbf1a9f2610 [ORD=1936] [ID=27]
0x7fbf1a9f2610: i32 = Register %vreg38 [ORD=1936] [ID=9]
As is the nature of ICEs, juggling the code around will probably make
it pass. But since I have plenty more AVX changes pending, which make
the code even more complex, it's also very likely that this issue will
happen in other places. For that reason, I choose to blacklist the
compiler instead.
Change-Id: Ide3201f0cc49c7ceb63e966f6de65a8315cbea4b
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
This significantly reduces the size of the generated code
in places where we don't need exceptions.
The -(no-)exceptions configure flag has been removed in the
process, as there is now a fine grained way to control this
on a per module level, and Qt is being compiled without
exceptions in most places.
Change-Id: I99a15c5d03339db1fbffd4987935d0d671cdbc32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Store PKG_CONFIG_SYSROOT_DIR and PKG_CONFIG_LIBDIR for the usecase of
cross compilation in qconfig.pri. They will get picked up by
pkgConfigExecutable() in qt_functions.prf used from link_pkgconfig.prf
as environment for pkg-config calls.
Change-Id: I7d0de05c0bd21b435275fc26c66a80035ba30970
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Modern versions of Xcode properly support dwarf2, and as such dwarf2 is
always enabled. This change removes the ability to turn it off, making
dwarf2 non-optional.
Change-Id: I149daeae6048ee8a1ed116363572173ad219102e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Mostly straightforward porting: Add configure test from Qt 4. Add X11
include to qgtkstyle_p.cpp. Use renamed QGuiApplicationPrivate::showModalWindow.
Change-Id: I83020e13ec00b49f3fe346814f881bce19a6f602
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Let configure generate the QT_QPA_DEFAULT_PLATFORM_NAME in
qconfig.h. This allows us to override the platform name
using a configure argument.
This commit adds -qpa <platform> that lets the user specify
the default platform at configure time. Note that the default
platform is not checked against the tree since plugins are
allowed to exist outside the Qt source tree.
In the absence of -qpa argument, configure checks the mkspec
for a variable named QT_QPA_DEFAULT_PLATFORM. This check is
implemented only in the unix configure because it will be primarily
used in custom mkspecs (devices, boards).
If -qpa argument is absent and the mkspec variable is absent,
the default value is determined based on the OS as below:
Unix - "xcb"
Windows - "windows"
Mac - "cocoa"
QNX - "qnx"
Done-with: Jørgen Lind
Change-Id: I0df31811a1b901a3242bfada1232e596ebda04f4
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
The build tree is not initialized when -help is passed to configure.
The mkspecs/ directory is not created and thus the mv fails results
with the following error:
mv: cannot move `.device.vars' to `/tmp/qtbase/mkspecs/qdevice.pri': No such file or directory
The solution is to create qdevice.pri just before we run config.tests.
Change-Id: Ie83018e27a03bb840d213aae8c963b0074e62bb4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Some versions of the DirectFB headers are unclean and will cause Qt
compilation failures. So blacklist those versions. Version 1.5.3
(present in Fedora 16) is known to be buggy and gets disabled by this
patch.
The compile error was:
qurlquery.h:169:5: error: ‘typeof’ was not declared in this scope
(qplatformcursor_qpa.h includes qevent.h which includes qurl.h which
includes that)
The error comes from the Q_FOREACH expansion. Note that Q_FOREACH uses
__typeof__, so it's supposed to be safe, unless someone ill-advised
goes and defines the GCC "safe" macro (double underscores on both
sides) to something else.
Change-Id: Ida41ee3b3c2fcba86a7e12182e7055123166693b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The include files have a hard dependency on OpenGL (ES2); testing for the
presence of EGL support is insufficient grounds for including this
functionality
Change-Id: I391b5dbbcbef40ecf68d16617b6eb1c0bb4b799e
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Instead of having to pass -no-xcb -no-eglfs -no-directfb, it's
better to pass -no-qpa-platform-guard which is also resilient
against future platform additions.
Change-Id: Id68bfe3688980fa273665b01b9332f5d6f359491
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Add DirectFB buildsystem integration by adding a configure target
and adding it as subdirectory to the project file. The default is
to automatically build directfb. Update the Broadcom/9425 build.
Change-Id: I482f865cebd9d5cd4c98c184773f8534f92db9df
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Currently, for host builds, pkg-config usage is autodetected based
on it's availability in the mkspec or the PATH. For xcompile builds,
pkg-config is disabled unless -force-pkg-config is passed.
-force-pkg-config is poorly named since it doesn't reflect the fact
that it applies only to xplatform builds. It is in fact the only way to
enable pkg-config in xcompile builds. And when passed, it doesn't actually
force anything since all it does is check env variables. To add to the
confusion, it prints a warning even if the env variables are setup correctly.
This patch remedies the situation. It adds (-no)-pkg-config. The flag works
for both host and xcompile builds.
By default, the value is 'auto'. In this mode, it will try try to detect pkg-config
from the path. If found, it will be used. For xcompiled builds, we use some heuristics
to determine if the pkg-config is actually usable:
1. if -sysroot is not set and the environment variables PKG_CONFIG_LIBDIR or
PKG_CONFIG_SYSROOT_DIR are not set, we disable pkg-config.
2. if -sysroot is set, then we setup PKG_CONFIG_LIBDIR and PKG_CONFIG_SYSROOT_DIR
automatically (provided $SYSROOT/usr/lib/pkgconfig exists).
If the value is 'yes', configure will error if it's heuristics fail to detect a usable
pkg-config.
If the value is 'no', pkg-config usage is disabled.
If the value is 'force', configure will skip it's heuristics and use pkg-config anyway.
This mode is useful, for example, when compiling for 32-bit on 64-bit systems.
This change also removes references to PKG_CONFIG_SYSROOT (PKG_CONFIG_SYSROOT_DIR
is the correct environment variable).
Change-Id: I07fc8d48603c65a60de0336fc6276e90fcb41430
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Scrolling the configure output to locate the build configuration
is painful. So save it in config.summary.
Change-Id: I40a2f7628e9a2b91a8ea44619dd49c00d5a61561
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The configure script currently automatically assumes that if you are cross
compiling, we should avoid trying to generate and strip separate debug
information due to toolchain limitations.
Historically there may have been good grounds for this, but it seems like
an aggressively pessimistic assumption which ignores the
standardization/advancement of embedded toolchains as a whole.
This assumption also extends to host compilers which deviate from the
automatically detected "platform" compiler, such as Clang.
Change-Id: Ifed2750325178bb5291d8ca1dde92925bfa36065
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Since the library and almost everything got renamed to qml, we
should do so for the debugging support, too.
(CONFIG+=declarative_debug will continue to work for some time
being, but prints a deprecated warning).
Change-Id: I295155dce873e2585c1452d2bf0625ea6ce219c4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
configure parses the compiler from the mkspecs using an awk script.
The detected compiler is then used to determine sysroot support.
The awk script is currently unable to handle loading of qmake
features and thus configure will not detect the compiler correctly.
This is the case when using device profiles. The qdevice.pri is loaded
through the qmake feature file device_config.prf.
One possible way to fix this is to move this detection after qmake is
built and make this a .pro based config.test. However, this cannot be done
because the sysroot is actually baked into the qmake binary as the
QT_SYSROOT variable.
The solution is to remove this check completely and let the build fail
when Qt starts compiling with --sysroot.
Change-Id: I6c3b7ec2c8e5e390d6f5b1e602d656682d610b98
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
-sysroot has been undocumented so far.
Change-Id: I552f9233778de9490a3479292f0cda9c8c439282
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Developers who are building & rebuilding Qt often end up needing to
recompile all other modules because of this removal even though the
libs are still compatible.
Change-Id: I4ec0e8ab222675dcd2a3f3a2b5e931c1c7f31f69
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
EGL support in src/platformsupport/eglconvenience requires OpenGL ES
to be enabled, so it makes no sense to test for the presence of EGL if
we're not enabling OpenGL ES.
EGLFS has similar requirements, so ensure it gets disabled
too. Otherwise we're going to get lots of undefined symbols in the
EGLFS plugin to things in QtPlatformSupport that did not get compiled
in either.
Change-Id: Ie55dd2e2597ec0594aa589ee8aac150c71104b46
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
PLATFORM_QPA is always true
PLATFORM_X11 is always false
remove/collapse all related conditional statements to lend greater clarity
to the configure script
Change-Id: I4998edf5402019370333ed79effcd0cacafbe87d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This requires 'configure -make tests' if you want to automatically
build autotests for a module by default.
You can still go into the individual tests/ directories and
'qmake && make check'
to build and run the autotests.
configure -developer-build will enable the tests by default,
like it did in Qt4.
Change-Id: If4d870987de0947a8328509dcc227fa9e6284201
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
For some reference platforms and SDKs we will need to pass in
extra paths. Currently users have to modify the mkspec to adjust
paths or set environment variables that will be picked up.
This change introduces the -device <name> and -device-option
<key=value> option. The key value pairs will be written to a
qdevice.pri and can be used by the qmake.conf of the device spec.
The reason to not save the key value pairs in qconfig.pri is
becase of the fact that the device spec loads the qdevice.pri
earlier than the qconfig.pri. qdevice.pri allows the mkspec
to set the compiler flags and qconfig.pri allows configure to
add to those compiler flags.
Done-with: Holger Freyther
Change-Id: I931a197b8be72397e1eedfee09502eefc01c9d4f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
This is a follow-up to comit 70a8833151.
The regular expression for CFG_HOST_ARCH was not updated in the above
commit.
Change-Id: I2baf0b42d851f1df096c2f6ad54aeec57940e661
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Intel CC 12.1 supports AVX2 but only with -march=core-avx2. The -mavx2
option produces a warning.
GCC 4.6 does not recognise any option.
GCC 4.7 recognises both -mavx2 and -march=core-avx2 so let's use the
latter for now. We may need to change to -mavx2 when there's an AMD
processor that supports AVX2 too.
Change-Id: I529240e6e6c2c0e3942d357e0320212d954fe4de
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This also removes the check for SSE, but the check for SSE2 and
further technologies is kept. If SSE2 is present, then SSE is too. We
don't have any code that uses the original SSE instructions only.
Remove the CMOV detection, since we don't use that anywhere and we're
not likely to ever use them..
Change-Id: I3faf2c555ad1c007c52a54644138902f716c1fe1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The regular expression should look for underscores in addition to
alphanumeric characters.
Change-Id: Idc3dbd67291ec1420f818d74fba8413b1e7cbcf1
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Any message/error in mkspecs or qmake feature files ends up confusing
the current arch detection logic. Instead, search for
"Project MESSAGE: .* Architecture: <arch>".
Change-Id: I308932a5b75f3a1fcbc4fe30c74faf2e83b2d752
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
config.tests/unix/freetype.pri has a !cross_compile flag, so we must
find freetype using the proper detection methods. The detection was
inside an X11 section of configure, so move that out.
And use the results of that detection, now that QMAKE_CFLAGS_X11 isn't
used (since we're not building X11 in QtPlatformSupport).
Change-Id: Ic8f5cfb7263849bfb12967756def2b5aaa244872
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The bsymbolic_functions test was missing $SYSROOT_FLAG, so the linking
was always failing and the test falsely negative.
Also make the error reporting better: if the flag was requested, error
out if the check fails and report more information in -v mode.
Change-Id: Ie2615f8083e7e58d63d9ee9c23be937dc864b30d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
With the move to the QPA architecture EGL is now only required by
individual platform plugins and the configure script has been adjusted to
reflect this.
Change-Id: Ieadacef0b970f29752d9e3e36a007e5cbb005b0d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
The XCB plugin requries libxcb >= 1.5. Configure and
config.tests/qpa/xcb now check for this.
Change-Id: I96c688b79bf5b49fd3ecc4ddc12ebdc2d3788790
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Without this, QMAKE_RPATHDIR is empty and qt_module.prf's logic to turn
on absolute_library_soname fails, causing some modules to build without
absolute paths (eg. qtjsbackend's QtV8 framework).
Change-Id: If03136ca60a5d8a96a589e2d1034e5884fd6a1ac
Reviewed-by: Michael Brasser <michael.brasser@nokia.com>
Makes no sense to disable iconv based on QPA. This change will
make iconv as the "system" codec i.e the codec used for 8-bit
locale dependent conversions.
Change-Id: I4469e9c226b2411ac1338f61dabb84ec9c2ec603
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This patch ensures that additional runpaths passed to configure via
the -R switch are added to the QMAKE_RFLAGSDIR variable.
Previously, although runpaths provided in this way were appended to the
linker options when building Qt itself, they were not appended to
the QMAKE_RFLAGSDIR value written to mkspecs/qconfig.pri. This meant
that the DT_RPATH attribute was set incorrectly in binaries built from
projects other than Qt itself.
-----------------------------------------------------------------------
Configure flags Expected value Value before this fix
-----------------------------------------------------------------------
<none> DEFAULT_RPATH DEFAULT_RPATH
-no-rpath <empty> <empty>
-R X DEFAULT_RPATH:X DEFAULT_RPATH
-no-rpath -R X X <empty>
-prefix Y Y/lib Y/lib
-prefix Y -no-rpath <empty> <empty>
-prefix Y -R X Y/lib:X Y/lib
-prefix Y -no-rpath -R X X <empty>
-----------------------------------------------------------------------
DEFAULT_RPATH = /usr/local/Qt-${QT_VERSION}/lib
Change-Id: Iaf1809b528ebd249694cf41e004173e881ca48ad
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
There should be a clear QWidget free path for people with no interest in
legacy QWidget functionality. Adding this option to configure makes this
path readily accessible and hence testable.
Change-Id: If87c1063fcf4c46f5280836126c11999feaa9f8a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Do not try to detect the host or target architectures using uname or
similar, and do not override with the -arch or -host-arch configure
arguments. The configures will still accept the -arch and -host-arch
arguments, but it ignores them and instead outputs a warning stating
that these arguments are obsolete and should not be used.
Set QT_ARCH and QT_HOST_ARCH qconfig.pri variables based on the compiler
target. This is done by running qmake (twice when cross-compiling) on
config.tests/arch/arch.pro, which preprocesses a file that contains all
knowns processors.
On Windows, configure.exe has never run any config.tests before, and
does not currently have a function to run a program and capture its
output. Use _popen() to accomplish this (as qmake does for its system()
function). This needs to be done after qmake is built, as does the
mkspecs/qconfig.pri generation. As a side effect, the configure steps
have been slightly re-ordered, but the overall result is the same. The
displayConfig() call is moved to just before generating Makefiles, so
that it can show the detected architecture(s).
Change-Id: I77666c77a93b48848f87648d08e79a42f721683f
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When cross-compiling, check for PKG_CONFIG_LIBDIR instead of
PKG_CONFIG_PATH. pkg-config searches for pc files in PKG_CONFIG_PATH
*and* the compiled in defaults (/usr/lib/pkgconfig). This means that
pc files from the host get found when cross-compiling.
Setting PKG_CONFIG_LIBDIR makes pkg-config search only in the path
set in PKG_CONFIG_LIBDIR.
Documented in the url below:
http://www.freedesktop.org/wiki/Software/pkg-config/CrossCompileProposal
Change-Id: I22dbf29c5691572b7cb8a5fce712ae7ba811670e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Config checks are done in the module.
We pick up the pkg-config stuff also in the module. There shouldn't be a
need to do this in configure anyway
Change-Id: I9ef73760511c6b684c6cd5dd13e7e581c588e7aa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the feature is rather obscure and unlikely to be used by anyone.
Change-Id: I2dfb4ca4d5d1f210d385c013f46bc6389fd6ea2d
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Logic was clearly always off kilter, and this was only defined for GUI
builds
Change-Id: Ie85c156510e7c450a5192408b4c365ff07ce2029
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
make is perfectly capable of doing shadow builds
Change-Id: I7e1c27cddc385b7a17ae5645b9cd26fa56d2f029
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
.qmake.cache is not necessarily accessible to other modules which depend on
information about whether we are cross compiling or not. We might as well
advertise this fact globally via the CONFIG variable in qconfig.pri.
Change-Id: I6dee3e6604e5ca1c775c5f9f834fe29b4e27adb8
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
this is oxymoronic: if a .qmake.cache is present, telling qmake the
project root is utterly pointless.
the windows variant never had this.
Change-Id: Iefc6e242ad7458dc699b955a3657f31f1ecf4c7b
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the tool locations are now determined with qtPrepareTool(), which takes
non-installed qt builds into account already.
Change-Id: I17b2c5f4b181417f2a612be2f540768e7dc0ae4e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the problem this (probably) tried to solve has been solved via ordered
builds a *long* time ago.
Change-Id: I84c58076c864735eea4210ec60aa060fe3e5d97e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
We need qdoc in qtbase to be able to properly
modularize our documentation and build it
when building the different Qt modules.
qdoc does contain a copy of the qml parser from
qmldevtools, but this is the lesser evil compared
to how we are currently forced to genereate our
docs (and the fact that no developer can run
qdoc and check the docs for their module).
Change-Id: I9f748459382a11cf5d5153d1ee611d7a5d3f4ac1
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Reviewed-by: Martin Smith <martin.smith@nokia.com>
Do not write Q_BYTE_ORDER to qconfig.h in the configures. Instead,
we #define Q_BYTE_ORDER in qprocessordetection.h, since many CPUs only
support a single endian format. For bi-endian processors, we set
Q_BYTE_ORDER depending on how the preprocessor sets __BYTE_ORDER__,
__BIG_ENDIAN__, or __LITTLE_ENDIAN__ (instead of using a compile test
to do so).
For operating systems that only support a single byte order, we can
check for Q_OS_* in addition to the preprocessor macros above. This is
possible because qprocessordetection.h is included by qglobal.h after
Q_OS_* and Q_CC_* detection has been done. Do this for Windows CE,
which is always little- endian according to MSDN.
Change-Id: I019a95e05252ef69895c4b38fbfa6ebfb6a943cd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
instead of being a variable added to the makespec (via qconfig.pri),
QT_SYSROOT is now a property.
the QT_INSTALL_... properties are now automatically prefixed with the
sysroot; the raw values are available as QT_RAW_INSTALL_... - this is
expected to cause the least migration effort for existing projects.
-hostprefix and the new -hostbindir & -hostdatadir now feed the new
QT_HOST_... properties.
adapted the qmake feature files and the qtbase build system accordingly.
Change-Id: Iaa9b65bc10d9fe9c4988d620c70a8ce72177f8d4
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Remove the -armfpa option the config.tests/unix/doubleformat*
detection. The places where we used QT_ARMFPA and Q_DOUBLE_FORMAT
has been removed as well.
Rationale: ARM FPA with GCC does not work with EABI. Qt currently
does not support compiling without EABI, making ARM FPA an
impossibility. It is unknown whether other compilers provide ARM FPA
support with EABI. Support for ARM FPA can be re-added in the future
should the need arise, but since ARM VFP is available for ARMv5 and up,
we should encourage implementors to instead use soft-floats or VFP.
Change-Id: I3671aba575118ae3e3e6d769759301c8f2f496f5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
switch blocks are noisy. this is nicer.
reshuffled the LibraryLocation enum to make table lookups possible and
future-safe.
using pointer-free tables to avoid adding data relocations.
Change-Id: I70ec2c2142ce02a15e67284e4b285d754d930da3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
evidently, The Author had no clue that the compiler will do that
automatically.
as it happens, the windows configure already did it right.
Change-Id: I7ebc018c254b316205348874ffa527526329b630
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Prior to this change, explicitly passing -qpa to configure breaks compilation on Mac. This is due to a false dichotomy between MAC/QPA
Change-Id: I52cacf96ae8d8d203787f9bbade417f2c55ab3f1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
This should make it less confusing for people building Qt 5 on Linux.
Change-Id: I3aa7151f790587d5944c837d701b1b1b580b4bc3
Reviewed-by: Alan Alpert <alan.alpert@nokia.com>
configure was unconditionally attempting to create two symlinks to
qconfig.h: include/Qt/qconfig.h, and include/QtCore/qconfig.h.
include/Qt doesn't exist any more, so this would always cause a
"No such file or directory" warning. Remove that one.
include/QtCore/qconfig.h is usually created by syncqt now, so this would
cause a "File exists" warning. Make that one conditional.
Change-Id: I8c6244dcbcf9765444f0d5c40c91a0ca192ecbcb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Direct use of pkg-config variables disregards the sysroot offset pkg-config
factors into consideration with the dedicated variables:
--cflags-only-I
--libs-only-L
these parameters exist exactly for this reason.
Change-Id: Ieecf31ebe0640f64b272b84fba22701aacf8f966
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
make the "evaluator" able to process simple variable expansions.
cache the processed spec, so it is not re-read for every variable.
Change-Id: I20e69ec7b65faa7d571e68dbfea6c21c79a62641
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
and run the configure checks with the values
Change-Id: Ie8e0072c686c6a7dce1d02e25a9c1abce4679d34
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
We no longer support universal ppc/x86 builds.
Change-Id: I8c4a1d087d02da1ad80d91a7a04147b37e81d74f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The logic here was wrong: test if the
target linker supports -rpath-link, and then set
it for both host and target via mkspecs/qmodule.pri.
Change-Id: Ie4da7ed2e06e784f9edb65a27290913ab838a8c2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this was inconsistent with how qmake itself works, and was actually
wreaking havoc.
Change-Id: I5aa83cc88ffe7141cc0c31b03b76c48274f1ebdb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Remove config.tests/mac/defaultarch.test, but do the same type of
default arch detection, only using the qmake binary instead of compiling
an empty file. Qt 5 will only support 10.6 and up, which means we
only support i386 and x86_64 now.
Change-Id: I24949ac803b965c523b1ee45cf769e266dcde134
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
The xarch.test and crc.test are not run by configure, so remove them
along with the related CFG_MACH_XARCH and QT_NAMESPACE_MAC_CRC configure
variables.
The kEventClassQt variable in qt_mac_p.h is also unused now, so remove
it as well.
Change-Id: I596ab9b493ce3164b6a4d40e8942479efc91b60d
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
All platforms are PLATFORM_QPA now, so we want to
remove PLATFORM_MAC.
Do one of two things: either remove the
PLATFORM_MAC code path or test on BUILD_ON_MAC
instead.
Change-Id: I6037a1a5f79498d9e0b5c2607e3698319fc7f68f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@nokia.com>
Apply the sysroot argument for the endian test only for the test used
for detecting the target endianness, don't use --sysroot for the host
detection.
Change-Id: I53edda6ebfd06e73cc64f2561b707bd2ba052ae7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Put in qconfig.h whether qt is compiled with reduced relocations.
When using -Bsymbolic-functions (enabled by default on Qt)
but not -fPIE, the comparison of the function pointers fail
because the addresses are different in Qt, and in the executable.
Hence we now enable -fPIE by default on qmake, and force a compilation
error when it is not enabled and built with reduced relocations.
Done-with: Sune Vuorela <sune@vuorela.dk>
Change-Id: Ib3fdba06fab6e8a93b75b4c6cf16cc973ab335db
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
linuxinput becomes evdevmouse. The experimental touch code is removed,
now the plugin's purpose is solely to generate mouse events from
absolute and relative pointer events. The plugin key is EvdevMouse.
touchscreen becomes evdevtouch. The plugin key is EvdevTouch.
In case keyboard support appears some day, it will fit nicely in the
system by the name of evdevkeyboard or similar.
Some little udev code is moved to platformsupport so it can be shared
between the plugins. This may be extended later if more sophisticated
udev support is needed. N.B. the intention is to keep this as simple
as possible. We are shipping these plug-ins as reference examples, not
as full-featured drivers.
evdev and udev support has configure time tests from now on. This
means the "drivers" (generic plugins) will get built automatically
when the support is available.
Change-Id: Iaf6260b5c2edfb9f25d070d2764466725adc6b4e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Recent commits in src/corelib/arch have removed empty directories,
which cause configure to assume that the architecture is not supported.
This assumption is wrong, due to changes in
src/corelib/thread/qbasicatomic.h to include the correct QAtomic*
implementation based on compiler pre-defined macros instead of the
architecture found by configure.
Change-Id: I026958fb9af8af62e295e68a4643c37ac9395dc6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QNX implements the POSIX version of iconv (with non-const function
signatures). However, it is still necessary to link with libiconv, unlike most
cases. Also, its iconv_open does not know how to handle an empty string.
Change-Id: I8654703e46b9c64503aca5521ce7fae1c97d7968
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
For shadow builds configure creates syncqt script to shadow build
directory tree calling the original syncqt from qtbase source tree.
This wrapped script will add two default parameters when calling
the original script. Both parameters are overridden in
qtbase/mkspecs/features/default_pre.prf and are not needed except by
configure script itself in latter stages where the parameter should be
applied explicitly in shadow build condition branch.
In addition, it adds the qtdir parameter for the forwarded syncqt call to
indicate the location of qt sources for the syncqt. This also will give
correct qmake path for qtmodule-configtests script triggered from syncqt.
Changes are done both for Linux and Windows configure.
Change-Id: I307b2e76c203ee14b849f10ff629f9668da2f223
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The tiff plugin and bundled libtiff is moving to the qtimageformats
project on Gerrit.
Task-number: QTBUG-23887
Change-Id: I4c848232fdccddd7e7f54215f9eaa78dc4c3a53d
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This removes the options to disable several modules, as they are in
separate repositories now and can be "disabled" by simply not compiling
them.
Note that this leaves some configuration options for these separate
modules in, as they have no own configures. This is ugly, but has to
stay that way for the time being.
Some other dead code had to go as well, just like accepting the obsolete
-qdbus option.
Change-Id: Ibb26e4f48ca8239c2c4396e4abefab4c87322be2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Added PCRE config.tests, and logic and command line options
(-qt-pcre and -system-pcre) for configure and configure.exe.
Change-Id: I5da2658191198dbcf48c07d7c5de1be1b884a7a5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The new atomic implementation chooses which header to include based
on what #define's are set by the compiler (i.e. __x86_64__ or
__i386__). Because of this, the qatomic_macosx.h header isn't used
anymore. This also means that the configure script does not need to
use or look for this file anymore, it should just use the normal
uname -m detection.
Change-Id: Ibf275488735483268286196952299c0e496dfd1f
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The MNG file format is generally abandoned, and libmng has been
unmaintained for several years.
The MNG plugin and bundled libmng has been moved to the
qtimageformats project on Gerrit.
Task-number: QTBUG-21869
Change-Id: I946432347014ffde2b72307a5f8b166ca5553602
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
When set in configure it would be written to .qmake.cache and would only
apply when building Qt. We then had an override (that was also out of
sync, version-wise) in the g++ mkspec, which would also apply to apps
building agains Qt. This override did howerver not apply when using
the Clang mkspec.
We now move setting macosx-version-min to the common macx mkspec, shared
by both g++ and Clang, which will apply both when building Qt and when
building something against Qt. The latter since an application built
against Qt will not deploy on versions of Mac OS earlier than 10.6
anyways, so we might as well always set the minimum-version.
The modifications to the mkspecs will result in macosx-version-min
being passed twice when compiling qmake, as configure writes its own
makefiles and the mkspec parsing in configure has a bug where it will
lazily evaluate qmake-variables instead of evaluating them inline. This
is not a problem, and can be fixed in a later patch if seen fit.
Change-Id: Ib29503ad00a9dc00e0a50b0dbd9459e89a20dfbd
Reviewed-by: Zeno Albisser <zeno.albisser@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Qt doesn't use iconv on Windows, but configuring it will appear to
work and the build will complete. The result is that character
set conversions do not work.
Configure.exe already disables iconv for Windows.
Change-Id: I449a00860c2e77e6cdd8cdcf7108621c684207bf
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
