The actual logging code, qt_message_print(), uses toLocal8Bit(), so
testing by comaring with toUtf8() isn't robust.
Change-Id: I7d6614e4af8c679674dbbf4ff47a88b2b75fc2dc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix tst_QNoDebug::streaming() to use toLocal8Bit(), to match
QTestLog::ignoreMessage(), which uses fromLocal8Bit().
Change-Id: I65f7b995a582aeab7b7ba61781a229fecd1ed3c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure <david.faure@kdab.com>
... in docs, comments, and warnings. Also adopt
some occurrences around there and in the snippets.
Change-Id: Icc0aa0868cadd8ec2270dda794bf83cd7ab84160
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
In the presence of multiple overloads of a function taking either
QString or QStringView, QStringView should always be preferred.
The rationale is that the QStringView overload may have been
added "later" (read: the function was written when QStringView
was not available yet, so it took QString), and the fact that
a function with the _same name_ offers a QStringView overload
implies the function never needed to store/own the string in
the first place.
Add a (compile-time) test for this preference. This is in
preparation for a future QString(char16_t*) constructor
(in Qt 5.15 / Qt 6).
Change-Id: I60a435e494b653548f8f8d52c5d7e7cac2cc875a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously, there was only a Python compile test which triggers
only when PySide2 is found. Rename it to pythonCompile().
Extend the TestEntry structure by adding the base line file
and flags, which represent all special cases found in the code.
Check for the presence of a Python base line file in addition
to the C++ one.
Prototypically add one form. Further forms can be added
on the go.
Task-number: PYSIDE-797
Change-Id: Ic2983fa3cab2399a6809e244f93c663e0212f675
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Deprecated the SAX classes and disabled or replaced their uses in
tests if applicable.
Removed the saxbookmarks example, no point in keeping examples for
the deprecated code.
[ChangeLog][QtXml] SAX classes are now deprecated. Use QXmlStreamReader,
QXmlStreamWriter in QtCore instead.
Task-number: QTBUG-76177
Change-Id: Ic171d62fa0527b0f36f94cf09a69586092269957
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This amends a1f4321bbb as the font
families should take precedence over the font family set. If the font
family is already included in the families then it should keep its
placement. Otherwise it should be appended.
Task-number: QTBUG-80475
Change-Id: I0049189c88b6879e57619815ec780960e9c0a300
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Conflicts:
src/corelib/tools/qvector.h
Make QVector(DataPointer dd) public to be able to properly merge
5b4b437b30 from 5.15 into dev.
src/widgets/kernel/qapplication.cpp
tests/auto/tools/moc/allmocs_baseline_in.json
Done-With: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Change-Id: I929ba7c036d570382d0454c2c75f6f0d96ddbc01
It used to be "iterator", causing a qdoc warning:
src/corelib/serialization/qjsonobject.cpp:1405: (qdoc) warning: clang found diagnostics parsing \fn int QJsonObject::const_iterator::operator-(const_iterator other) const
error: out-of-line definition of 'operator-' does not match any declaration in 'QJsonObject::const_iterator'
Add a small test.
Change-Id: Id65effffa720ed1e0fb0ee6937dcc4298f3ef363
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In Qt6 there is a behavior change with extra stuff after the seconds -
it's no longer allowed and will result in an invalid QTime.
This was introduced with bf65c27789 but
the autotests were not adjusted for it.
Change-Id: Ia78f4f2a8019e46d9d0e8e8b8918a3ab2d4638e2
Reviewed-by: Liang Qi <liang.qi@qt.io>
If a type has both a converter to QVariantList and to
QSequentialIterableImpl registered, we would have chosen the
QSequentialIterableImpl version. In the case of types like QJSValue,
this is more costly. With this change we therefore uses the direct
conversion if it has been registered.
The same applies to QAssociativeIterableImpl and
QVariantHash/QVariantMap.
Change-Id: I9c0b5068efe4bfbc5e0598a200e6db59201e9974
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It makes sense for it (instead of triggering the QAbstractItemModel
base class implementation, which doesn't do anything). Safe to override
virtuals in this case -- code calling the old version could not do
anything useful, so at least new code gets those functions properly
implemented for free.
Change-Id: Iefe1ff25e15d877435e93ab28289ad2579616f72
Task-number: QTBUG-48076
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
The previous implementation did not take into account different color
groups in resolve mask. It led to some issues when resolving a
palette or checking whether a brush is set or not.
Task-number: QTBUG-78544
Change-Id: I9b67b2c444eb62c022643022a874dc400005e6ee
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Add a light-weight associative container, API-wise very similar to QMap,
that's based on two sorted continuous containers (QVector by default).
The class is internal for now.
Change-Id: Ife12576c4abb39a3ea2acb0a1ba0faca91b3a4c5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
In Qt6 there is a behavior change with extra stuff after the seconds -
it's no longer allowed and will result in an invalid QDateTime.
This was introduced with bf65c27789 but
the autotests were not adjusted for it.
Change-Id: Iee6a9a7ac6cbb2754a68e082bb7074d17fac9d9c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If the singular fontFamily() is given, then this is obviously the one to
be preferred over any plural fontFamilies(). Make sure it always ends up
first in the list of emitted font families.
Change-Id: I1e3b1ba29721c8298b1a0d4a1e1da49ba5b4e7ac
Fixes: QTBUG-80475
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When QLocale::Country is set to QLocale::India numbers are written so that
after first three from the right and then after every second will be comma.
E.g. 10000000 is written as 1,00,00,000
Task-number: QTBUG-24301
Change-Id: Ic06241c127b0af1824104f94f7e2ce6e2058a070
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
QString(View)s can be built or manipulated in ways that make them
contain/refer to improperly encoded UTF-16 data. Problem is,
we don't have public APIs to check whether a string contains
valid UTF-16. This knowledge is precious if the string is to be fed in
algorithms, regular expressions, etc. that expect validated input
(e.g. QRegularExpression can be faster if it can assume valid UTF-16,
otherwise it has to employ extra checks).
Add a function that does the validation.
[ChangeLog][QtCore][QStringView] Added QStringView::isValidUtf16.
[ChangeLog][QtCore][QString] Added QString::isValidUtf16.
Change-Id: Idd699183f6ec08013046c76c6a5a7c524b6c6fbc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add 2 methods to set/ask if a tab is hidden.
[ChangeLog][QtWidgets][QTabWidget/QTabBar] Tabs can now be
hidden with setTabVisible
Fixes: QTBUG-63038
Change-Id: I7b07ecdb485e1f6c085d03515ef2b73baae889de
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
It is useful to use an array of bit as an integer value.
I add also a prarameter to set endianness when converting
value to UInt32.
[ChangeLog][QtCore][QBitArray] Added toUInt32() to return
the bit array's value as a uint32_t.
Change-Id: I9d8c7a33f11e7ce94cb67aa9a50b11fa42d56168
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added new API setDocumentXmpMetadata/documentXmpMetadata and
addFileAttachment
[ChangeLog][QtGui][QPdfWriter] New API to provide external document XMP
metadata and attach files to PDF.
Fixes: QTBUG-78651
Fixes: QTBUG-78764
Change-Id: Ic0b37e8d12899f907001db469080594c14c87655
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
It wasn't tested and behaves in a very particular way.
Change-Id: I60a31681e5b221cf9a86df77e410a76ee4c10864
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
qabstractsocketengine.cpp was changed to explicitly include its header
moc file, which works with AUTOMOC, but doesn't with qmake.
The header file needs to be explicitly listed in the HEADERS variable.
Amends 2a1fc7b835.
Change-Id: I9d31288d1f1eb2310679a7e685bd7ea458a77920
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This method should not ignore accessibility objects without
corresponding widget. The widget may have parts with their own
QAccessibilityInterface and these can be also focused.
VoiceOver ignores them if they are not returned by focusChild().
QAccessibleTabBar::focusChild() has been implemented to demonstrate
the concept and make tab titles of QTabBar readable by VoiceOver.
Task-number: QTBUG-78284
Change-Id: Id7c62d86154bbd5d47d6bbee8cb7d05268c2e151
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QStringListMode::moveRows() had an issue when the destination was before
the source row.
Change-Id: Icf64e5b4cdd6a39faf3ba4ccc3883196b247ccbd
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
QListModel::moveRows() had an issue when the destination was before the
source row.
Change-Id: I4ce8b425451f2f53c7eb3b211e9590753dec618a
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
We're now using the same infrastructure for QVector,
QString and QByteArray.
This should also make it easier to remove the shared null
in a follow-up change.
Change-Id: I3aae9cf7912845cfca8e8150e9e82aa3673e3756
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
This is not to be taken as supported and is still undefined behavior,
but I prefer we do not crash.
Change-Id: Icf4f3398bfd57fcbdc611a5a821a1f2de0838330
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The previous implementation was *extremely* expensive. It
relied on loading a binary JSON file from resources (which
involved decompressing it), then extracting information out of
it to build a gradient. Already-loaded gradients were kept in
a local cache, which had to be mutex protected.
Instead, this patch extends the gradient generator to build
static arrays filled with the web gradient data, sitting in
.rodata.
These arrays are used when building QGradient objects with a
web gradient. No explicit mutex protection is necessary, since
accesses will just read from the arrays.
As benefits, this patch removes:
* the binary json representation from QtGui's resources (~4KB
compressed, ~50KB uncompressed)
* the overhead of reading from the JSON for each used web
gradient;
* the startup costs of registering the webgradients in the
resources;
* all the overhead of mutex locking when building such
gradients;
* all the runtime memory allocations to load, parse and cache
the web gradients (including the memory + CPU spike on first
load due to the uncompression of the JSON data, as well as a
couple of deep copies).
Change-Id: If5c3d704430df76ce8faf55ee75ebd4639ba09c4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QItemSelectionModel::columnIntersectsSelection() should honor the parent
according to the docs. For rowIntersectsSelection() this was fixed a
long time ago but columnIntersectsSelection() was forgotten.
Sync the both functions and use range-based for loops as a drive-by.
Fixes: QTBUG-80644
Change-Id: Iaf08f85e2225204d1e6564fa4bb0bc826352ed53
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When an existing item is replaced with a new one in
QStandardItemModel::setItem() then the persitent index is invalidated
which leads to some unexpected behaviors (like e.g the header size and
resize mode are reset).
Therefore we have to make sure that the invalidation does not happen.
This can be achieved by delaying the call to QStandardItem::setModel()
for the old item until the new is properly added. After this, the old
item no longer gets a valid QModelIndex from the model and therefore
can't invalidate the persistent index anymore.
Fixes: QTBUG-13605
Fixes: QTBUG-73000
Fixes: QTBUG-80586
Change-Id: I4e45e6feb81b7287c0859f638d7ab1a576fc2f0f
Reviewed-by: David Faure <david.faure@kdab.com>
As opposed to unite(), this inserts one map into the other
without duplicating elements.
Task-number: QTBUG-35544
Change-Id: Ie8ab350b29148851a3176cef1007e8a4ca82c273
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This patch fixes the QMetaObject::superClass hierarchy for Q_GADGETs
that inherit from a template which in turn inherits another Q_GADGET.
One common scenario where this is applied is for the CRTP. Without this
patch, moc would stop at the template and then sets the superClass
QMetaObject to a nullptr. For QObjects this works, since there moc knows
that every child must by definition inherit QObject. In order to support
this for Q_GADGETs too, we defer the judgment about the availability
of a staticMetaObject in the base class to compile time through the
existing QtPrivate::MetaObjectForType<Base>::value() helper.
[ChangeLog][QtCore][moc] Moc now correctly sets a non-null
QMetaObject::superClass for Q_GADGETs that inherit from a template which
inherits another Q_GADGET.
Change-Id: I103b5efd74ed24172dffce477ca2ed6d0f374d44
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Previously, setDateTime() was documented to ignore the new date-time's
time-spec. It used the date and time (determined using that timespec)
with the QDateTimeEdit's configured spec. It is debatable whether that
really counts as ignoring its time-spec. All the same, that's what it
did. Fixing it is a behavior change. Added tests.
[ChangeLog][QtWidgets][QDateTimeEdit] QDateTimeEdit::setDateTime() now
converts the new datetime to the QDateTimeEdit's time-spec, rather
than combining its date and time (determined using the time spec it
came with) with the QDateTimeEdit's date and time.
Fixes: QTBUG-71181
Change-Id: Ibf0bd87723c3957ca00a2199d51d992032ef57ee
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
We did some changes in the .cpp files of some tests when converting
the build system to CMake, but didn't adjust the .pro files which
caused tests to fail when doing a qmake build.
Make the required changes. Was discovered when doing a test
wip/cmake -> dev merge.
Change-Id: I407a982412cb44df592a38a4cb997968bdfe3304
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This flag is used in QSequentialIterable and QAssociativeIterable to indicate
that the data pointer in VariantData should be deleted after the variant has
been constructed.
The use case for this is
https://codereview.qt-project.org/c/qt/qtdeclarative/+/284151, where we have
a proxy iterator and cannot easily return a pointer to already owned data, as
it is hard to manage its lifetime in the iterator. In contrast, it is clear
that we can release the memory in the QSequentialIterable functions, as it has
already been copied into the QVariant there.
Change-Id: I2b33497d991cd4f752153e0ebda767b82e4bb851
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Removes QGL paths in sub-attaq and chip examples.
The boxes example depended on QGL and has been removed.
The corresponding module and test directories for the opengl module are now
empty, but has been left there so we can move the QOpenGL* classes there.
[ChangeLog][QtOpenGL] The deprecated QGL* classes have been removed.
Fixes: QTBUG-74408
Change-Id: I52f56409af8f6901359462a7ba162103d051fe3d
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This saves us from having to bootstrap rcc in regular (non-cross)
compilations, as it can now link to QtCore. Actually un-bootstrapping
rcc is left as an exercise for the reader.
This commit discovered that MSVC cannot handle constexpr arrays bigger
than 256 kB, at which point it simply starts claiming that the constant
expressions using it are not constexpr. ICC has a similar problem at
64 kB, but it tells you why ("note: type "const unsigned char [65537]"
too large for constant-expression evaluation").
Note also that this requires gzip or zstd to be in PATH for compression
to happen. RCC linked to zlib, which is always present due to the
bundled copy. gzip's presence is not likely to be a problem on Unix
systems, but could be for Windows users, especially MSVC ones. If gzip
is not present, QtCore's size will increase by about 1910 kB of
read-only (sharable) data.
Change-Id: I2b1955a995ad40f3b89afffd15a3e65a94670242
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
ISO date format doesn't allow spaces within a date, although 3339 does
allow a space to replace the T between date and time. Sixteen tests
added to check this all failed. So clean up the handling of spaces in
the parsing of ISO date-time strings.
[ChangeLog][QtCore][QDateTime] ISO 8601: parsing of dates now requires
a punctuator as separator (it previously allowed any non-digit;
officially only a dash should be allowed) and parsing of date-times no
longer tolerates spaces in the numeric fields: an internal space is
only allowed in an ISO 8601 date-time as replacement for the T between
date and time.
Change-Id: I24d110e71d416ecef74e196d5ee270b59d1bd813
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
even if we are currently inside processEvents (apparently called manually
and not from QEventLoop::exec()). A carefully crafted application
(see, for example, the linked QTBUG or even updated auto-test)
can trigger itself into failing to exit the current (potentially nested)
event loop. We can harden our Cocoa event dispatcher to detect
such condition and properly propagate 'interrupt' to where it'll
do its job, indeed, interrupting the real event loop (aka [NSApp run]).
This mainly means we have to undo what bool blocker would erroneously do.
Also, long live (as people love to say these days) to another tricky
(somewhat) auto-test (surely, it's not flaky!).
Fixes: QTBUG-79477
Change-Id: I794f0cda23e24d36be67f2bb63d52b74be057c31
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The implementation for the X mask would accept any printable
character. Since that includes the blank character, there was no
difference in behavior between the requiring X and optional x: both
would allow the input to be unset, i.e. blank.
This change should be seen in conjunction with the doc improvement
da0af1e.
[ChangeLog][QtWidgets][QLineEdit] Inputmask X character now requires non-blank input.
Fixes: QTBUG-76320
Change-Id: I3e0363e9be5c13373a157cce69c99379615b5829
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Fix some tests in tst_QSqlQuery:
- make sure to use QSql::HighPrecision in tst_QSqlQuery::precision()
(needed for psql)
- remove outdated stuff for mysql 3.x
- psql_bindWithDoubleColonCastOperator: the placeholder are stored as
named placeholders in psql
- avoid some useless old-style casts
Change-Id: I54d29a7e24f17d853cce6baa09a67d9278098810
Reviewed-by: Robert Szefner <robertsz27@interia.pl>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The platform window may create or destroy its surface from other entry
points than the QWidget API, in which case QWidget needs to sync up
its own state to match. In particular WA_WState_Created and the winId
needs to be recomputed.
Fixes: QTBUG-69289
Fixes: QTBUG-77350
Change-Id: I769e58ead3c2efcf8c451c363108848feade9388
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Preparations to move QString over to use QArrayDataPointer instead
of it's own private struct.
Change-Id: I7796a595393394083f6a85863e3c710ebbdea149
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The goal here is to move things over to QArrayDataPointer. This prepares
for it.
Change-Id: I32f54a47594274799600c618f7341c200ceaa306
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We already detach immediately since change
c2d2757bcc. That basically removes
the main purpose of having QChar/ByteRef, and we can just as well
get rid of those classes for Qt 6.
Change-Id: I8dc566a1948ddc29c0cb8a77ec7310654a7219a4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
That allows us to pass by value for all fundamental and pointer types.
This requires some magic to remove methods taking a T&& to avoid
ambiguous overloads for QVector<int/qsizetype>. Remove them for all
cases where parameter_type is T, as copying or moving will do
exactly the same thing for those types.
Change-Id: I8133fecd3ac29bb8f6ae57376e680bc3d616afbf
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Those members are not required anymore and now part of the
object itself.
Change-Id: If9eb5355ca8f2cf9528f6f63ca4e172acc9f9aed
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Don't store our string data as QByteArrayLiterals anymore, but revert
back to simply storing them as an array of char* and offsets into that
array.
This is required to be able to inline size and begin into QByteArray
itself. Once that change is done, we can then avoid creating copies of
the string data again.
Change-Id: I362a54581caefdb1b3da4a7ab922d37e2e63dc02
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
I'd have preferred to use QArrayDataPointer<ushort> for QString, but
that option wasn't the best one. QArrayDataPointer try to do some
operations using QArrayDataOps and that would expand to unnecessary
code. What's more, the existing code expected to be able to modify and
access the d pointer.
Instead, this commit introduces QStringPrivate (named differently from
QStringData to catch potential users), which contains the three
members. This POD class is also used in QJsonValue to store the
"inlined" QString. QHashedString in qtdeclarative will need a similar
solution.
Change-Id: I33f072158e6e2cd031d4d2ffc81f4a8dbaf4e616
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Add QGenericArray to simplify operations. This class can be shared by
other tool classes. If there is nothing else to share it, we can move
the code onto qvector.h. The one candidate is QList.
All tests pass and valgrind is good.
Change-Id: Ieaa80709caf5f50520aa97312ab726396f5475eb
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This test hardcodes the allocation behaviour instead of testing what
it should be testing. Unfortunately, it can't test the actual problem
directly since the problem was "it crashed when using vectors with 1
billion elements".
Change-Id: Iec6a26ae490b8fdd4a7db1269e3bae85fc77ee52
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This requires that the allocation functions return two pointers: the d
pointer and the pointer to the actual data.
Ported QArrayDataPointer & SimpleVector to the inlined size & data.
For now, the size and offset members are not yet removed from
QArrayData, to let QVector, QByteArray and QString compile unmodified.
Change-Id: I8489300976723d75b8fd5831427b1e2bba486196
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Instead of using the reference count to store whether the data is
sharable and whether the header is immutable, move the settings to the
flags member. This allows us to save one comparison per deref() or
needsDetach(). It also allows for the possibility of mutable data
pointed to by a static header.
Change-Id: Ie678a2ff2bb9bce73497cb6138b431c465b0f3bb
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The next change will stop using some values in the reference counter as
settings from the data.
Change-Id: I94df1fe643896373fac2f000fff55bc7708fc807
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The Mutable flag now contains the information on whether the data this
QArrayData points to is mutable. This decouples the mutability /
immutability setting from the allocation and from the type of data,
opening the way for mutable raw or foreign data.
There are still plenty of places in the source code that check the
size of the allocation when it actually wants d->isMutable(). Fixing
this will require reviewing all the code, so is left for later.
The needsDetach() function is moved to QArrayData and
de-constified. It returns true when a reallocation is necessary if the
data is to be modified.
Change-Id: I17e2bc5a3f6ef1f3eba8a205acd9852b95524f57
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Windows apparently has special code to deal with those addresses. If all
your network interfaces are up and have acquired addresses, then the
link-local network at 169.254.0.0/16 is unreachable. I had never caught
this because both my Windows VM and my bare metal Windows have inactive
interfaces (like the Bluetooth PAN one) and, when inactive, Windows
assigns a link-local address. But in the CI, the interface(s) were all
up and running, causing this issue.
Unix systems don't treat IPv4 link-local any differently, so they always
worked, so long as any interface was up and there had to be one to reach
the network test server.
This commit reworks the test to add test addresses based on the
addresses found on up & running interfaces (see tst_qudpsocket.cpp). For
IPv4, we flip the bits in the local portion of the address. For IPv6, we
add a node with an address I generated randomly (non-universal), with
the same scope.
Fixes: QTBUG-65667
Change-Id: I568dea4813b448fe9ba6fffd15dd9f482db34991
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
These flags allow us to determine what type of data QArrayData is
carrying. There are currently only two supported types:
- raw data type: constructed via fromRawData or static data
- allocated data type: regular data done via heap allocation
The QArrayData object is usually allocated on the heap, unless its own
reference count is -1 (indicating static const QArrayData). Such
object should have a type of RawDataType, since we can't call free().
Add GrowsBackward for completeness as well as the StaticDataFlags
default for static data.
Change-Id: Icc915a468a2acf2eae91a94e82451f852d382c92
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In almost all cases, use d->allocatedCapacity() or
d->constAllocatedCapacity() instead of d->alloc, since they do the
same thing (right now). In the future, the functions will be
changed. There is a separate const version because most const code
should not need to know the allocation size -- only mutating code
should need to know that
There are a few cases where d->alloc was replaced with a better
alternative, like d->size. The one case that remains in the code will
be replaced by a different test when it's available.
Change-Id: I48135469db4caf150f82df93fff42d2309b23719
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Instead of stealing one bit from the alloc field, let's use a full
32-bit for the flags. The first flag to be in the field is the
CapacityReserved (even though the allocate() function will store some
others there, not relevant for now).
This is done in preparation for the need for more flags necessary
anyway.
Change-Id: I4c997d14743495e0d4558a6fb0a6042eb3d4975d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Rename to QArrayData::ArrayOptions in preparation for these flags
being in the array itself, instead of used just for allocating new
ones.
For that reason, rename QArrayData::Default to
DefaultAllocationFlags. And introduce QArray::DefaultRawFlags to mean
the flags needed for creating a raw (static) QArrayData.
Also rename QArrayData::Grow to GrowsForward, so we may add
GrowsBackward in the future.
Change-Id: I536d9b34124f775d53cf810f62d6b0eaada8daef
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The test passed mostly by accident so far, as the created QByteArray
was shorter than what the test assumed.
Change-Id: I06858801d83a504eadc73ec2be281c88f8ffad5d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In prevision to Qt6 which is going to discourrage the use of the integer id,
add some missing API to the staticless QMetaType API:
- Add a way to construct a QMetaType from a type without calling qMetaTypeId:
QMetaType::fromType<T>()
- Add equality operators
- Add a QMetaType::name() function
- Add a default constructor (by adding a default parameter to the existing ctor)
Change-Id: I95487c1c31bdf0d773717daa9d5452cbced30673
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Since I can't #include qobjectdefs from qnamespace because of circular dependency,
move the Qt macro in the qtmetamacros.h header.
Deprecate QObject::staticQtMetaObject since now one can just use Qt::staticMetaObject
Change-Id: I11982aa17c2afa2067486b113f8052672f3695eb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The throw() specification is no longer accepted in C++17 mode, so remove that.
Also pass the -std=c++1z to the compiler as Qt is going to require C++17 soon
Change-Id: I6d249e574d90cd1cf5c0ea595830d2db07681050
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In some cases when editing the text (for example when removing the
selected text, or pasting a text block) the text cursor position is
updated, but its visual x position is not updated. This causes the next
cursor movements to start from a wrong position.
Force the update for those cases.
Fixes: QTBUG-78479
Change-Id: Ia496be62beec58660f5e1695e5aafae09c79684e
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Cite RFC 3339 as basis for allowing a space in place of the T, too.
The RFC mentions that ISO 8601 accepts t and z for T and Z, so test
for them case-insensitively. Add a test for this.
Change-Id: Iba700c8d74d485df154d27300aab7b1958e1ccef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If milliseconds were followed by a space, the space was included in
the count of "digits" read as the fractional part; since we read (up
to) four digits (so that we round correctly if extras are given), a
harmless apce could cause scaling down by too large a power of ten.
Since QString::toInt() ignores leading space, we were also allowing
interior space at the start of the milliseconds, which we should not,
so catch that at the same time. Added tests, including one for the
rounding that's the reason for reading the extra digit, when present.
Fixes: QTBUG-80445
Change-Id: I606b29a94818a101f45c8b59a0f5d1f78893d78f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime is a friend of QTimeZone, so can access its internals; but
it must check the zone is valid before doing so.
Expanded tst_QDateTime::invalid() and made it data-driven to catch the
failure cases.
Commented on a test-case that caught a mistake in my first attempt at
this, and on QDateTimeParser's surprising reliance on a quirk of
QDateTime::toMSecsSinceEpoch()'s behavior.
Fixes: QTBUG-80146
Change-Id: I24856e19ff9bf402152d17d71f83be84e366faad
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
QByteArray::fromBase64 was liberal in its input, simply skipping
over invalid characters. As a side-effect of this, it had
no error reporting, meaning it could not be used to convert
fromBase64 _and_ validate the input in one go.
Add more option flags to make fromBase64 strictly validate
its input. Since we want to know whether it has succeeded
or not, and the existing fromBase64 overloads do not
allow for that, introduce a new function that returns
an optional-like datatype.
While at it: base64 decoding can be done in-place; add an
rvalue overload to enable this use case.
[ChangeLog][QtCore][QByteArray] Added the new fromBase64Encoding
function.
[ChangeLog][QtCore][QByteArray] Added new flags to make
fromBase64 / fromBase64Encoding strictly validate their input,
instead of skipping over invalid characters.
Change-Id: I99cd5f2230f3d62970b28b4cb102913301da6ccd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When cloning a QTextDocument, the text fragment of the original document
is copied into the new one, which results into copying also the
formatting attributes. However, when the text document is empty, the
corresponding text fragment is also empty, so nothing is copied.
If we want to transfer the formatting attributes for an empty document,
we need to set them explicitly.
Fixes: QTBUG-80399
Change-Id: I382cd0821723436120af47c06ec7bfa849636307
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
We forgot to reset the flags when replacing the element, so we ended up
with an integer with HasByteData after:
testMap[0] = QStringLiteral("value");
testMap[0] = 42;
Fixes: QTBUG-80342
Change-Id: Ia2aa807ffa8a4c798425fffd15dabfa066ea84b0
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
As opposed to unite(), this inserts one hash into the other
without duplicating elements.
Change-Id: Ifc786c48f5dc3ab18c29782e73eac3c1a3ef8981
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QDoubleValidator would accept "1,23" as valid in a locale which has ','
as a thousand separator. However, it should have been Intermediate
instead, as there is still one digit missing.
Fixes: QTBUG-75110
Change-Id: I6de90f0b6f1eae95dc8dfc8e5f9658e482e46db3
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The new version takes/returns a value that can be unpacked and passed to
other functions without knowing which backend is in use.
The old API will be removed in a later change when dependent modules have
been updated
Task-number: QTBUG-78570
Change-Id: I18d928ceef3cb617c0c509ecccb345551a7990af
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
1. Add a new verification callback. This gives an option
to report errors directly from this callback (by emitting
handshakeInterruptedOnError()). This allows an application
to explain to its peer why the handshake was interrupted (by
sending a corresponding alert message).
2. This also means we want to notice such alerts (in Qt,
from the application's point of view, they are mostly
informational only, no interaction is required). So we
also introduce a new 'info callback', that can notice alert
messages read or written. We also introduce two new enums
describing the level and type of an alert message. QSslSocket
gets three new signals (for incoming/outgoing alerts and
verification errors found early).
3. In case we requested a certificate, but the peer provided
none, we would previously abruptly close the connection without
a proper alert message (and such a situation is not handled
by any verification callbacks, since there is no certificate(s)
to verify essentially). So we now introduce a new verification
option that maps to what OpenSSL calls 'SSL_VERIFY_FAIL_IF_NO_PEER_CERT'.
This way, the proper alert will be generated.
Fixes: QTBUG-68419
Change-Id: I5d1e9298b4040a2d4f867f5b1a3567a2253927b8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The code was assuming that if the parsing of the value worked,
then it must be a list of 4 variants. But in this case it's just
a single length.
This came from <td> using 4 values for border-width
while other elements use a single value. But the storage
is shared. So the fix is to use 4 values everywhere.
When reading 4 and there's only one, it gets duplicated,
so the caller can just use the first one in that case.
Task-number: QTBUG-80496
Change-Id: I682244b6e3781c4d673a62d5e6511dac263c58e8
Reviewed-by: Nils Jeisecke <nils.jeisecke@saltation.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Tested locally with the following configurations:
- iOS device builds (arm64)
- iOS simulator builds (x86_64)
- iOS simulator_and_device builds (fat arm64 and x86_64 archives)
All iOS builds currently require a custom vcpkg fork which contains
fixes for building the required 3rd party libraries.
qtsvg, qtdeclarative, qtgraphicaleffects and qtquickcontrols2
have also been tested to build successfully.
simulator_and_device builds are also supported, but require an umerged
patch in upstream CMake as well as further patches to vcpkg.
Task-number: QTBUG-75576
Change-Id: Icd29913fbbd52a60e07ea5253fd9c7af7f8ce44c
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
This will blacklist this test for ci. Currently blocking enabling tests
for MSVC2019
Task-number: QTBUG-65667
Task-number: QTQAINFRA-2875
Change-Id: I7198490b1529ce2f4409bfa7399031dad7644a06
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This patch aims to implement the session management available on macOS.
Currently applicationShouldTerminate is just a go through that closes
everything and ends the application. The new implementation calls
first appCommitData and cancels the termination properly if required.
This means that if a user wishes to logout, Qt applications can now
cancel that like e.g. answering to Safari asking whether it is ok to
close because of a number of opened tab/window.
Fixes: QTBUG-33034
Change-Id: Id5d7416cb74c762c5424a77c9c7664f0749da7f6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The code was initially introduced in
9204b8c31e but getting the names were
conditioned on whether or not Windows identified it as a truetype font.
This excluded cases which had preferred names embedded but was not
truetype fonts. To fix that we run the code unconditionally.
[ChangeLog][Windows] Fixed a bug where some fonts would not be
accessible by referencing their typographic name.
Fixes: QTBUG-78556
Change-Id: I8823684b09cce3b1b8722b1e609a5bb49b13da13
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
We need to reset the pressed index when the decoration was pressed on
otherwise if the mouse ends up over an already selected item that was
previously clicked on. This prevents it from thinking that the mouse
has been released on this item right after pressing on it.
Fixes: QTBUG-59067
Change-Id: Iab372ae20db3682ab0812661f86533079ba4083c
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Some structures needed to be cleaned for the reuse to be safe.
Reusing it cuts down on the overhead in lancebench.
Also uniqueness of block names are now enforced, and the common pattern
of "end_block blockName" could now be parsed if not always commented
out by begin_block handling.
Change-Id: I0daf6445292383aaab9392550d0842e0a654ad27
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Instead of OID as string, OpenSSL returns a human-readable name.
No need to fail then, use such a name in QVERIFY if OID not found.
Fixes: QTBUG-80329
Change-Id: I4392fc9f37367f7c34c05d172db015b44e2a8497
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Also, change the notion of 'unsupported protocol' for QSslSocket,
previously it was SslV2 and SslV3, now instead it's all versions
of DTLS and UnknownProtocol:
- makes no sense at all to connect using TCP socket and then
suddenly start using DTLS_client/server_method
- UnknownProtocol is not to be set in a configuration,
unknown means that some ciphersuite's protocol version
cannot be established.
- 'disabledProtocols' auto-test becomes 'unsupportedProtocols'
and tests that QSslSocket fails to start encryption if the
protocol version is wrong.
Handling these enumerators (SslV2 and SslV2) as errors
not needed anymore. Removed from QSslContext and our
existing backends (qsslsocket_whatever).
TlsV1SslV3 enumerator is not making any sense at all (previously
was [SSL v3, TLS 1.0], then became "the same as TLS v. 1.0", but
now this name is very confusing. Removed.
Task-number: QTBUG-75638
Task-number: QTBUG-76501
Change-Id: I2781ba1c3051a7791b476266d4561d956948974a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
macOS fails to create a zone for the name its own systemTimeZone
claims to have (see new comment). So make sure we do consistently
recognize the name systemTimeZoneId() returns, using systemTimeZone
from which we got its name.
Add minimal testing of system time-zone.
Fixes: QTBUG-80173
Change-Id: I42f21efbd7c439158fee954d555414bb180e7f8f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When the geometry of a hidden widget was set with setGeometry(),
WA_PendingMoveEvent and WA_PendingResizeEvent were set unconditionally
even if the crect already had the correct value. This lead to
unneeded Move/Resize events within sendPendingMoveAndResizeEvents().
Fixes: QTBUG-75475
Fixes: QTBUG-79906
Change-Id: Ibbe03882f039948b6b7c04887420741ed2e9c0f7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Replace QWidget::repaint() with update() + wait until the paint event is
received.
Task-number: QTBUG-80237
Change-Id: I57da7cd8fa119344484b849a88729bca7b48616c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
For Metal and Vulkan this needs actual work because that's where
the concept of renderpass descriptors is relevant. GL and D3D can
just return true always.
The big benefit of this is that Qt Quick can now compare renderpass
descriptors via isCompatible() for its pipeline cache (similarly to
how it is already using isLayoutCompatible() for srbs), and so
renderpass descriptors for layers (Item.layer, ShaderEffect) will
typically be compatible and so can pick up pipelines created by other
layers from the cache.
Also add autotests for shader resource binding and renderpass descriptor
compatibility.
Task-number: QTBUG-80318
Change-Id: I0008bc51c4ee13b0113d2c8caf799e1257f18a18
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
The ones we reject used a zero offset while the one that does parse
(though it shouldn't - revised comment) has a one hour offset. Made
them all use that offset and added a partner test that has no invalid
characters, so ensure the success of the invalid character tests isn't
due to falsely rejecting the valid date/time text to which the invalid
characters are added.
Task-number: QTBUG-80038
Change-Id: I6e3dd79b981af6803e60877229c56599cfd719cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The qdatetime implementation's rfcDateImpl() uses regexes which did
not match its comments; nor did either the regexes or the comments
match what was documented. A review of relevant RFCs suggests we
should revise this in future, probably at Qt 6.
The documentation also only addressed the formats recognized when
parsing a date-time, without indicating how they are serialised or how
dates and times are handled separately.
Added a note to the tests for the read-only formats, to remind the
reader that the RFCs merely recommend recognising these - be
permissive in what you expect and strict in what you deliver.
Change-Id: I0f0bec752e7a50bde98cceceb7e0d11be15c6a6f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch ensures that the list of input files are sorted before being
collected. This provides consistency when comparing results generated
from the CMake port which do not have the same order as qmake.
Change-Id: I46e3acf7c26dfd21fd0c1196bdeddf22acbf6ba5
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
While we are at it, remove the Border and MirrorOnce wrap modes that have
not been supported on OpenGL, because they are unsupported with Metal+iOS
as well.
Task-number: QTBUG-78580
Change-Id: I0db94b9d3a6125b3bb5d7b1db5d02a42cd94d2c2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reimplement QDomDocument using QXmlStreamReader and switch to the new
implementation starting from Qt 6.
The changes in the behavior are reflected in tests: some test cases
which were marked as "expected to fail" are now passing.
Task-number: QTBUG-76178
Change-Id: I5ace2f13c036a9a778de922b47a1ce35957ce5f6
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
We already did that when parsing from CBOR binary data, so the code was
already present.
[ChangeLog][QtCore][QCborValue] The constructor taking a CBOR tag and a
value to be tagged now attempts to convert to a QCborValue extended
type. For example, if the tag is 0 (UnixTime_t) and the payload is a
number, the resulting object will become tag 1 (DateTime) and the
payload will be the the ISO-8601 date/time string.
Fixes: QTBUG-79196
Change-Id: I6edce5101800424a8093fffd15cdf650fb2fc45c
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Calling QColor::setFoo() is currently inconsistent - some setter do
invalidate the colors, some don't. Unify it by calling invalidate in
every setter.
Task-number: QTBUG-62452
Change-Id: Ia4f0bd16ea30e9659bc989ffc2b319892438b84b
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The convenience functions setBackground(), setForeground() and
setSizeHint() a default constructed value as 'reset'. This means a
default constructed QBrush or QSize is returned in the data() function
which leads to an unexpected background or forground color or size hint.
Therefore check if the passed value is a default constructed value and
set an empty QVariant instead which.
[ChangeLog][QtWidgets][ItemViews] The convenience views
QList/Table/TreeWidgetItem now treat a default constructed QBrush or
QSize as an empty QVariant which allows to reset the values set to it's
default values.
Task-number: QTBUG-76423
Change-Id: I840570bbad3e5fd8c5b4b58903b4fd0066dbdeb7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This was used to support QFlags f = 0 initialization, but with 0 used
as a pointer literal now considered bad form, it had been changed many
places to QFlags f = nullptr, which is meaningless and confusing.
Change-Id: I4bc592151c255dc5cab1a232615caecc520f02e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDomElement::setAttribute(QString, double) did not use QString::setNum()
but qsnprintf(). This is wrong because qsnprintf() is using the current
locale instead QLocale::C. It was also inconsistent to
QDomElement::setAttributeNS() which was already using QString::setNum().
Also fix the documentation which stated that all
QDomElement::setAttribute() format the values according the current
locale.
Fixes: QTBUG-80068
Change-Id: Iabb0b39c0d0723060527542c283a5435f26f31ca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allegedly Apple has fixed the bug that made this necessary, so we
should be able to include these two test-cases once more.
This reverts commit ba9585bd02.
Fixes: QTBUG-69875
Change-Id: I5ac6019c0d647691eda6cdbb2a53e7471859d4a3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
QComboBox had no option to tell the user that he must select an item -
there was no placeholder text like e.g. in QLineEdit. This feature is
widely used in html forms so we should support it also.
Therefore add a new property 'placeholderText' to specify a text which
should be shown when the current selected index is invalid.
[ChangeLog][QtWidgets][QComboBox] QComboBox got a new property
'placeholderText'
Change-Id: If6dac45c9f43455474e267907b0b0d893301c611
Fixes: QTBUG-1556
Fixes: QTBUG-2776
Fixes: QTBUG-77141
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Consider this simple example:
QLineEdit edit;
edit.setInputMask( "9-9-9-9-9-9" );
edit.show();
Without any input, m_text will contain: " - - - - - ". text() removes
the input mask's mask characters from that and returns " ". A string
with 6 spaces. Thus currently the End key jumps to position 6, which is
in the middle of the string. Using m_text the End key jumps to the actual
end.
[ChangeLog][QtWidgets][QLineEdit] Fixed End key in combination with
certain input masks.
Task-number: QTBUG-16187
Task-number: QTBUG-20414
Change-Id: Ibb30a1dfa2f78103611b5afc9971dc43e8bdcc4a
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
