This helps alleviate a performance issues where by building iOS based
projects takes a significantly longer amount of time than it should.
Task-number: QTBUG-59136
Change-Id: I77ae12f507725ceb11106b484d73bb7d46e0845c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
As the directory installation command also works with files as a source
we can unify the external commands, resulting in simpler command lines.
Change-Id: I65013626eedbdb3ce1c77ed230d46edd1603b986
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Similar to the two parent commits, this patchs preserves the time stamps
of files we install as a result of recursive directory copying.
Change-Id: Id5931a467196d5cd67acfa0deffc2488af8a3669
Task-number: QTBUG-59004
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The result of "make install" should be the same regardless of whether it
has been run multiple times and the destination exists already. This is
done by making the file installation calls always take canonical source
and target paths and not look at the target directory.
Task-number: QTBUG-60370
Change-Id: I83a584c0dbc4fd10c79976d4169bf6bc051884a1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Similar to the parent commit, this patch adds a unified code path in
qmake itself for installing program files while preserving their
original last modification timestamp.
Change-Id: I7b7dcfa6228c2bfd48ea6036549398bb6f90032f
Task-number: QTBUG-59004
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
On non-windows platforms, we use the "-p" parameter of install(1) to
preserve the last modification timestamps of files. On Windows the use
of copy does not preserve them. As a cross-platform solution, this patch
introduces a simple built-in install command in qmake to copy files.
Task-number: QTBUG-59004
Change-Id: I3064d29a2b8c7b009a1efbf8f00b84c079ea5417
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
projects using a dynamic build are not supposed to access this variable
anyway.
Task-number: QTBUG-51598
Change-Id: I81b55ea9ba460b80919f40ed7fe3d52129636b9e
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
Reviewed-by: Jonathan Liu <net147@gmail.com>
the arguments after '--' are by definition meant only for the top-level
project, as that's where configure is invoked from. passing them to
sub-projects just adds noise to the make output and misleads users.
note that this specifically does not support qmake -r, which will break
if the subprojects rely on the arguments being absent. this isn't a
problem, because the qt build doesn't support qmake -r anyway.
Change-Id: I7ecff6212ce3137526005fc324a4a7ae45e3345e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
it's wrong to use the escape function for makefiles, as the command
goes directly to a popen() call.
Task-number: QTBUG-57343
Change-Id: I34a8e4d8fb406303c593e7c1e24019e0f756e7f8
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
that is, adjust path separators and don't quote them. we already did
that to some degree, but totally inconsistently, so it just didn't work
for any targets with "fancy" file names.
note that we don't bother doing that for recursive targets, as these are
assumed to be identifiers.
Change-Id: Ic75f003b71abc6fed03a4121b903ad5ee8253ed2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the inherited arguments may contain the '--' argument, which turns
additional arguments into configure arguments. the simplest fix for
that is injecting additional arguments at the front, not at the end.
Change-Id: I7cc00a42f0148e5ccbbeda2ad59fa8c63749f02d
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
MakefileGenerater::Compiler is larger than a void*, so holding
it in QList is horribly inefficient.
Fix by using QVector instead.
Change-Id: I9ea173271caf9b4995d311c3864c6967da049380
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
And blacklisted a few tests in tst_QUdpSocket.
Conflicts:
src/android/jar/src/org/qtproject/qt5/android/QtNative.java
src/corelib/global/qglobal.cpp
src/corelib/global/qsystemdetection.h
src/corelib/io/qfileselector.cpp
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms_egldevice/qeglfskmsegldeviceintegration.cpp
tests/auto/network/socket/qudpsocket/BLACKLIST
Task-number: QTBUG-54205
Change-Id: I11dd1c90186eb1b847d45be87a26041f61d89ef6
A bug in the Windows C Runtime causes text mode pipes to drop newlines
sometimes. This bug was hidden because of another bug in rcc which
caused newlines to be redundantly duplicated. When the latter bug was
fixed (commit 53d5811b) the former bug was exposed, causing invalid
vcxproj files to be generated. The Windows bug is described here:
https://connect.microsoft.com/VisualStudio/feedback/details/1902345
The workaround is to avoid text mode, and do the conversion of "\r\n"
to "\n" ourselves (which we were already doing anyway).
Change-Id: I792599a4cd7822f109fa921f02207fb1b144b1d1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this introduces an ambiguity, so some char* arguments need explicit
QString construction now.
Change-Id: Ic3919a1fa9419bbb3b57dd1aa7eb95643ee59e53
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
- QMAKE_FILE_IN_EXT as an alias for QMAKE_FILE_EXT, for consistency with
QMAKE_FILE_IN_BASE
- QMAKE_FILE_IN_NAME to make pairing _EXT/_BASE to get a full name
unnecessary (finally ...), and make use of it
- QMAKE_FILE_OUT_PATH, because i'll need it
Change-Id: I3d91ddb84f9cce52a665d562da11d165c92550c8
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it's beyond me why they shouldn't be.
Change-Id: I2493469636e4f196bfeb2eb00a691aeae0f1881d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
(or trivially marked const) ... by replacing them
with C++11 range-for loops.
Change-Id: I1522e220a57ecb1c5ee0d4281233b3c3931a2ff8
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
... by replacing them with C++11 range-for loops.
To avoid detaches of these mutable Qt containers,
wrap the container in qAsConst().
Change-Id: If086bea06fe26232a7bb99fad8b09fce4dc74c27
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
... by replacing them with C++11 range-for loops.
The functions QMakeProject::values(), QMakeMetaInfo::values()
and QHashIterator::value() all return by const-reference,
so they can be passed to range-for without further changes.
Change-Id: Ic3b39ed8ff8cd7a6f287f1aa9d61a1acd67d7aaa
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
When building QNX on MS-Windows, make magically adds the Msys root as
prefix to variables whose values look like paths; this applies to both
environment variables and variables given values on the command-line.
When we don't actually want to install under the Msys root, this is
unwelcome "help". So (for MinGW's make) support a magic prefix of our
own, @msyshack@, that'll make a path value for INSTALL_ROOT not look
like a path to make; we can then strip it off when we come to use it.
Change-Id: I951ad3c8fe3e5cfb49e6e361d7fff779f3a9d716
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
... instead of using erase in a loop, with quadratic complexity.
Change-Id: I4ac03ac0e893fc5dbb5e45131fcbfe82f1564bee
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
the library inside a bundle doesn't have an extension.
this doesn't really fix anything except suppressing the error message,
as we discard the result of the operation anyway.
Change-Id: Idfe3d1714dedb59d9d3e86a65f074e516c431389
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Instead of lumping both Objective-C (.m) and Objective-C++ (.mm) sources
into the same pile, passing them on to the same compiler as for C++ (CXX),
with the C++ flags (CXXFLAGS), we follow Apple's lead and treat them as
variants of the C and C++ languages separately, so that Objective-C
sources are built with CC and with CFLAGS, and Objective-C++ sources
with CXX, and CXXFLAGS.
This lets us remove a lot of duplicated flags and definitions from the
QMAKE_OBJECTIVE_CFLAGS variable, which in 99% of the cases just matched
the C++ equivalent. The remaining Objective-C/C++ flags are added to
CFLAGS/CXXFLAGS, as the compiler will just ignore them when running in
C/C++ mode. This matches Xcode, which also doesn't have a separate build
setting for Objective-C/C++ flags.
The Makefile qmake generator has been rewritten to support Objective-C/C++
fully, by not assuming that we're just iterating over the C and C++
extensions when dealing with compilation rules, precompiled headers, etc.
There's some duplicated logic in this code, as inherent by qmake's already
duplicated code paths, but this can be cleaned up when C++11 support is
mandatory and we can use lambda functions.
Task-number: QTBUG-36575
Change-Id: I4f06576d5f49e939333a2e03d965da54119e5e31
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
as a side effect, this makes the extensions used for searching libraries
configurable under windows (QMAKE_LIB_EXTENSIONS).
Change-Id: I3e64304fcadbfe74d601b50a70a73180c894503e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
first, store the library's full name in the .prl file, like we do on
unix. this is not expected to have any side effects, as QMAKE_PRL_TARGET
was entirely unused under windows so far.
then, rewrite the mingw library handling: instead of letting the linker
resolve the actual libraries, do it ourselves like we do for msvc. we
could not do that before due to the partial file names in the .prl
files: if the library didn't exist at qmake execution time, we'd have to
guess the file extension (the msvc generators never had that problem, as
they know about only one possible extension for libraries anyway).
make use of processPrlFile()'s ability to replace the reference to
the .prl file with the actual library. that way we don't need to
re-assemble the file name from pieces, which was fragile and
inefficient.
QMAKE_*_VERSION_OVERRIDE does not affect libraries coming with .prl
files any more. additionally, it is now used literally (not
numerically), and values less or equal to zero lost their special
meaning as "none" - this isn't a problem, because that's the default
anyway, and there is no need to override bogus versions from .prl files
any more.
no changelog for that, as i found no public traces of that feature
outside qtbase.
[ChangeLog][qmake][Windows] Libraries coming with .prl files can now
have non-standard file extensions and a major version of zero.
[ChangeLog][qmake][Windows][Important Behavior Changes] The .prl files
written by earlier versions of Qt cannot be used any more. This will
affect you if you depend on 3rd party libraries which come with .prl
files. Patch up QMAKE_PRL_TARGET to contain the complete file name of
the library, and replace any /LIBPATH: in QMAKE_PRL_LIBS with -L.
(the part about /LIBPATH: actually refers to the next commit.)
Change-Id: I07399341bff0609cb6db9660cbc62b141fb2ad96
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
don't look up the files and normalize the paths multiple times, as this
is inefficient and hard to understand.
on the way, processPrlFile() got unnested, and libExists() got nuked.
note that a missing QMAKE_PRL_TARGET will be now complained about, which
really should never happen.
Change-Id: Ibcd77a7f963204c013548496ecd2d635e1a4baba
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
don't prepend the normalized path to the target name, but replace only
the filename in the original string. this ensures that any variables in
the path are preserved.
Change-Id: I58c2b54b7114bfdbf659e6a6ce3e02c2611900d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the dependency doesn't seem to make any sense.
while the deduplication is a bit naive and thus dangerous, it was
already enabled by default anyway by virtue of link_prl being enabled by
default, so this amounts to a non-change for by far most projects.
use no_lflags_merge to disable it.
Change-Id: Ia441931ddbc41ed617aee21e6fe8821e3448d2bc
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
seems pointless to tear apart the functions, on the way duplicating some
boilerplate.
Change-Id: Ide3697ca1c931e8de607ac48c21cecce4781fe13
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
On OS X with a framework-based build of Qt, the 'Libs:' line of the
.pc files generated by `qmake` references the framework. This requires
two separate arguments to the linker: The fixed string '-framework' and
the name of the framework (e.g. 'QtCore'). Only the latter might need
quoting. Prior to this fix, they were treated as a single argument (e.g.
'-framework QtCore'), thus always quoted because of the contained space,
and later lead to errors when trying to link a Qt framework discovered
via `pkg-config`.
Change-Id: I5c11ee651048832007e2ee4ebcbcf2e3212c8f48
Task-number: QTBUG-47162
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
we need to do full shell quoting, not the limited whitespace quoting.
Task-number: QTBUG-46224
Change-Id: I41bc9aee556ca680dce0875b58159a31db962452
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this affects only files explicitly listed via the .clean member without
placeholders, so more or less a corner case.
Change-Id: I7bd55948130aaee116d1a4bebbad0c445b76197b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it helps enormously to put spaces between target names ...
Task-number: QTBUG-45533
Change-Id: Ic41f8287c6c37761b1be3ad7c383b5c7fb714b12
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
instead of allowing arbitrary input and output base paths, restrict them
to the project input and output dirs (in any permutation), which are the
only cases ever used anyway.
this permits much clearer call sites, and allows later optimizations.
Change-Id: I48d149a4417af5c858e66ec57c476a5bc6b17f17
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
... instead of sheepishly assuming qmake_pwd().
it also canonicalizes consistently with the relative output path now.
Change-Id: I86231f7259179020643405f3c0e696a74031aa4e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
