Currently pressed touch point is added to the list of active touch
points in Gui module. It must be excluded from consideration when
we traverse the list.
Task-number: QTBUG-43255
Change-Id: Idddab093b1f6a79122cf18fad7f43bfc93ce7eea
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The fallback code for unhandled event types in QWidgetWindow::event
directly called event() on the underlying QWidget (i.e. m_widget->event(e)).
The problem with that approach is that it does not activate any
event filters that can have been installed on the top level widget.
Instead, let's use sendEvent to forward the event to the widget.
An extra modification becomes necessary:
the events received when creating/showing/etc. a widget change,
hence the corresponding test needs to be tuned. On the other hand,
apparently this fixes a long time XFAIL in that test.
Task-number: QTBUG-42281
Task-number: QTBUG-26424
Change-Id: I237bbbc301e3e9e10f071589629c71343a600ef9
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Instead of making insignificant the all platform for
QtBase 5.5 integration.
Change-Id: Ief3f29c094bdbc90e684f19c1077ee595fb7d581
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
This system is no longer in the CI rotation and we haven't had reports
of the same issues happening on later versions. Either the issues have
since been fixed or they were never an issue in Qt in the first place.
This commit has the additional benefit of getting rid of the following
shell error when qmake was run:
sh: line 0: [: =: unary operator expected
as /etc/lsb-release hasn't contained DISTRIB_CODENAME for some time and
proper quoting was never implemented (not even qtcpsocket.pro).
Change-Id: Ia0aac2f09e9245339951ffff13c829e910ee64e9
Reviewed-by: Albert Astals Cid <albert.astals@canonical.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently Qt uses the QPlatformIntegration::StyleHint
SynthesizeMouseFromTouchEvents to check whether to synthesize mouse
events from touch events. But not only platform plugins can produce
touch events, they can be created by e.g. QTest::touchEvent() and in
this case we almost definitely need synthesizing regardless of the
platform.
This commit introduces a QTouchDevice::MouseEmulation capability which
replaces use of the QPlatformIntegration::SynthesizeMouseFromTouchEvents.
So it's possible to pass QTouchDevice without this capability to
QTest::touchEvent() and be sure that mouse events will be synthesized.
Notice that touch pads always emulate mouse events.
As a result we can activate some tests which were disabled for specific
platform configurations by commits 6c1670d8c2
and e9760f1559.
Change-Id: Idc82fa4007a095fc1cb5934979361b0023d2b793
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Reasons:
- the PlayBook NDK is old and its compiler does not keep up with newest
C++11 improvements inside Qt code.
- the PlayBook NDK diverges considerably from the standard BB10 NDK,
making it non-trivial to keep a common codebase.
- It's a defunct platform.
- Maintenance time is limited.
[ChangeLog][Platform Specific Changes] Removed BlackBerry PlayBook support.
Change-Id: Ia338aff55f4e4b747ebdecb0e1463a369a656c03
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bernd Weimer <bernd.weimer@pelagicore.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Re-enable tests that were skipped because of open, now closed, bugs.
Change-Id: Ic7dbe0a9cf74df1e69550536d5923a62e2186b6f
Task-number: QTBUG-26424
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
For windows that do not have WS_EX_TOOLWINDOW set, the WINDOWPLACEMENT
API uses workspace/available aera coordinates. Introduce a helper
function to return the offset and use that.
Task-number: QTBUG-43872
Change-Id: I329c640f180524699b45b855b4583f447c4a0987
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Replace by QCOMPARE where applicable; introduce message to generate
output for failed comparisons with QVERIFY2().
Task-number: QTBUG-43872
Change-Id: I09c8f9fd31ceed224e441f253049f68907ca0d7a
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Commit 1259c5768e410361bcd8b5cf0c2057a2ebabda83 in qtdeclarative removed the
ability to create QWidgets in QML by giving them the correct parent, which
requires calling QWidget::setParent instead of QObject::setParent. This patch
introduces a hook that will allow QtQml to give widgets a proper parent.
Change-Id: I84c57ca5032582c43e405219343d55ac9cf2ffa0
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
... which is the module-wide include, bringing in the entire QtCore.
Change-Id: I5cd872efa4562917fc4e3850809cb7595710c43a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
When a popup is opened it grabs the input, but the leave event to the other
windows needs to be sent.
Remove the popupEnterLeave test as it did not test any code. The Popup
never gets any enter or leave events so it will succeed always succeed
Task-number: QTBUG-36862
Change-Id: I625c616eeb74b5168af7b751485e2a9a53b76cd3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Fix warning:
void QWindow::setTransientParent(QWindow*) ... must be a top level window.
which occurred for example when parenting a QMenu onto a native child
widget.
Task-number: QTBUG-41898
Change-Id: Icc25fb2108bd68b2d9c0e551949b90fc7a82d358
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
ASAN report:
READ of size 8 at 0x606000011990 thread T0
#0 0x505e3b in EnterTestMainDialog::eventFilter(QObject*, QEvent*) tests/auto/widgets/kernel/qwidget/tst_qwidget.cpp:10294
[...]
0x606000011990 is located 48 bytes inside of 56-byte region [0x606000011960,0x606000011998)
freed by thread T0 here:
#0 0x2b8df3551c79 in operator delete(void*) ../../../../gcc/libsanitizer/asan/asan_new_delete.cc:92
#1 0x418ab5 in EnterTestMainDialog::buttonPressed() tests/auto/widgets/kernel/qwidget/tst_qwidget.cpp:10276
previously allocated by thread T0 here:
#0 0x2b8df3551739 in operator new(unsigned long) ../../../../gcc/libsanitizer/asan/asan_new_delete.cc:60
#1 0x4188cf in EnterTestMainDialog::buttonPressed() tests/auto/widgets/kernel/qwidget/tst_qwidget.cpp:10272
EnterTestMainDialog::eventFilter() checks for nullness of 'modal'
before accessing it, but buttonPressed() did not reset 'modal'
to nullptr after deletion.
Change-Id: I65562a29f8264a6996d7d615e06de1d1afb5af53
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Fixes a regression against Qt 4, where Show/Hide events were received
when the minimized state changed.
It is restricted to QWidget so as not to introduce additional events
to QWindow (which already has signal visibilityChanged()) and cause
unexpected side effects in QQuickWindow.
Task-number: QTBUG-41312
Change-Id: Ib165a5daf7a7e5d8231ef8a94b70e8a2a3253057
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Everything else passes, after some pending fixes in QtWayland.
Change-Id: Ibd8efcaab8c5210111854f1a7362434046a62898
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Use sizes relative to the test widget size; move windows relative
to the top left point of the available screen geometry. Set a window
title on widgets to be able to identify them. The test now
passes on Windows using a 4K monitor.
Task-number: QTBUG-38858
Change-Id: I5df9198e390befeb3ca18796e24180135a084aad
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Fix tests widgets leaking widgets and ensure it stays
that way by adding a check to cleanup().
Task-number: QTBUG-38858
Change-Id: I77a81d823c68cf0b4e51c2da55b1c473d6e4170b
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Fixed qwidget test cases for platforms that show windows full screen by
default and that don't support WindowMasks. Incorporated QNX/BlackBerry
peculiarities.
Change-Id: I349ecab5cef35c7d9751aa547465f685d620164a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
This reverts commit a1c5198387.
The idea of detecting non-spontaneous events by comparing
against the widget's crect has problems when sequences
of programmatic resizes occur. In addition, QWindowSystemInterface's
queueing of events is problematic for this.
Task-number: QTBUG-39611
Task-number: QTBUG-32590
Change-Id: I4674d8d5d5d432d938f7226b5790543335665c1f
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
It is NOT always the same as isEnabled().
Added a unittest to prove it.
Change-Id: I7717126835923e8c091249bfcdf81767c44fb5f7
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
QWidget::resize() or QWidget::move() set the new size/position values
and send events. The spontaneous events generated by the platform
should be ignored in that case.
Task-number: QTBUG-30744
Task-number: QTBUG-38768
Task-number: QTBUG-32590
Change-Id: I9c0ae38842ed76a8a88ca64fdc9bbe106b2766b7
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
QEXPECT_FAIL followed by QTRY_COMPARE considerably slows down
tests due to the check timing out.
Task-number: QTBUG-38890
Change-Id: I7f90f2627fc6ce149d159a6d13355ca1a8181d54
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
When a child of a widget is spontaneously revealed due to a call to
the parent 'resize' method, the child will not receive a paint event
if it has the WA_StaticContents and WA_OpaquePaintEvent flags set.
This is caused by the backing store being pre-emptively resized by the
call to setGeometry_sys, which causes QWidgetBackingStore::sync to skip
the block which handles the static contents.
There doesn't appear to be any reason to preemptively resize the backing
store, since it is always resized as-needed during the the 'sync' method.
This change-set removes the code which preemptively resizes the backing
store.
Task-number: QTBUG-35282
Change-Id: Ie9942854ca5322dfe0f98ed8100810161576be80
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
[ChangeLog][QtGui][QWindow]QWindow::icon() now defaults to the application
icon, which can be set with QGuiApplication::setWindowIcon().
Change-Id: Id1974e5cda81775e515c14b294f67fb99351c6c9
Reviewed-by: Albert Astals Cid <albert.astals@canonical.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
QScreen::grabWindow() is not always reliable because it grabs from the
framebuffer. (The window might then be covered by other windows, e.g.
"Stays on top"-Windows, popups etc).
If QScreen::grabWindow() fails we therefore fallback to
QWidget::grab(). This will not grab from the frame buffer, but it will
ask the widget to render itself (with its current state) to a pixmap
and return it.
QWidget::grab() should usually return the expected pixmap, and the
pixmap it gives is not subject to the state of the window manager.
This means that both QScreen::grabWindow() *and* QWidget::grab()
must produce an unexpected pixmap in order for the test to fail.
Change-Id: I276554155bb1e5b510d2a2d43628d91669464fe2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Brings Windows QPA on par with other platforms.
[ChangeLog][Windows] Don't cover the taskbar when maximizing
frameless windows.
Task-number: QTBUG-8361
Change-Id: Iba35132f697cb7379650a4c883b616c5c2023d4c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
Tweak a handful of tests which didn't compile on this platform.
Change-Id: I208d9eb289dfb226746c6d0163c3ea752485033b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Qt::WA_Mapped maps (sic) to windowHandle()->isExposed(), and we set/update
it in QWidgetWindow::handleExposeEvent(). Setting it directly in show_sys
shortcuts QPA and assumes showing a window is synchronous on all platforms,
resulting in trying to flush the widget backingstore when the window was
not exposed yet (due to discardSyncRequest starting to return false).
This reverts commit 829b1d13b2.
Change-Id: I0bd700d4939bc69ba184d8586435b68ec3dd72fb
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
The grabbing always grabbed the desktop. This caused it to also grab
tooltips, siderbars etc that could overlap the window which again
caused the pixmap comparison to obviously fail.
This will currently only fix it on windows. If needed, it should also
be fixed for other platforms.
Task-number: QTBUG-30566
Change-Id: I5cee8651e1d94dedded0acae8b19f351acd976c4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Pass window flags on to ColorWidget constructor and use a window
frame + stay on top-hint for the moveChild/showAndMoveChild tests
to make the screen grabbing more reliable.
Disable animations on Windows since they seem to affect screen
grabbing as well (fading in of windows).
Task-number: QTBUG-30566
Change-Id: I8eacfc203d26674dc1b283d6643f3d434f218f26
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
- Remove irrelevant test subdirs via .pro files
- Follow WinCE codepaths where applicable
- Replace unsupported Win32 APIs with WinRT equivalents
This does not aim to fix any failures in the tests themselves; it only
makes them compile.
Change-Id: Ia82bc0cc402891f8f6238d4c261ee9152b51be80
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Try to stabilize doubleRepaint and others, try to get them away
from taskbar areas.
Change-Id: Icae8da575999afccb314edafd7deb16446e3d1c2
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
XPASS : tst_QWidget::update() QCOMPARE(w.numPaintEvents, 1) returned TRUE unexpectedly.
Loc: [tst_qwidget.cpp(4017)]
Change-Id: Ib7664871ed218f4c88fd2430491fa65443651927
Reviewed-by: Simo Fält <simo.falt@digia.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Make sure the value of QWindowsWindow::isExposed is in sync
with regions we expose.
This provoked a couple of existing issues in the qwidget test.
setWindowGeometry tested that windows with invalid sizes got
exposed on screen. They didn't, but because the plugin sent
bogus events, these used to pass. Same with windowMoveResize.
The expect fails are also rather bogus. Showing invalid-size
widgets could be considered undefined behavior. The Window
manager could resize it, choose to not show it at all, etc,
but they now pass on windows.
resizeEvent has been broken since 5.0.0, but the test didn't
spin the event loop so the second event didn't get delivered
before the test completed.
Task-number: QTBUG-30744
Change-Id: I3a9efcd095f366126a87739f4248185b6c81d407
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Skip the test on X11 where it's consistently failing in CI but not when
trying to reproduce locally. Also attempt to make test slightly more
robust on other platforms (it's already #ifndef'd for Q_OS_MAC).
Task-number: QTBUG-30271
Change-Id: I6743eb99549abbd945e380a3a54ce8620000298a
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
The test has been recently failing in CI. The problem was easy to
reproduce in a virtual machine by resizing the window of the virtual
machine small enough. This change makes sure that the requested size
hint is significantly smaller than the desktop size, to avoid the
window manager stepping in and limiting the window size.
Change-Id: Ie319892747bee60ea6f11e27b6c1bfb4731ef587
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
If the widget is larger than the screen,
its title bar top left corner will be shown
inside the screen.
Task-number: QTBUG-30142
Change-Id: Id93773874be3616b3ef4b9bee6e1bb751c541d7b
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
This change fixes a failure of tst_qwidget under XFCE (Ubuntu 13.04).
Change-Id: Ic63e85a97ac6e44ce8c281a80ef4e83feecd9185
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Default-constructed geometry does not mean put the window at 0,0,
and it does not mean center the window on the screen: it means
let the window manager position the window. If the window is
explicitly positioned at 0,0 though, that is a higher priority
than the transient hint; without this change, the transientFor property
had no effect. On X11, transient means use center "gravity" to
make the transient window exactly centered. But the user can still
override the geometry of a transient window, as with any window.
On OSX and Windows, neither transient window functionality nor smart
initial positioning are provided, so a window with no position set
will be centered on the screen, and a transient window will be put
at the center of its transientParent.
Change-Id: I4f5e37480eef5d105e45ffd60362a57f13ec55f5
Task-number: QTBUG-26903
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
The bug was caused by changes b371f3f943
and 3bb9024952, which removed the event
forwarding that QWidget::mouseDoubleClickEvent() used to do without
making sure to call ignore() on the event like
QWidget::mousePressEvent() does.
Task-number: QTBUG-29680
Change-Id: I98af8052ad3dd1dea15d07a710aa9212ef5e4a68
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Fully decorated windows cannot be smaller than 160x30 (Large fonts).
Enlarge Windows or remove Window frame to get rid of decorations.
Task-number: QTBUG-28611
Change-Id: Idb6ee94fb8d0760d5f97042b3084557f11e9fdf9
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: Ibe8e2ec867afb4051a3c7eef806d9cd86945928b
Reviewed-by: David Faure <david.faure@kdab.com>
Previous commit b2363a935c fixed keyboardModifiers() after QPA event
processing, but broke QTestLib, which expects spontaneous input events
sent to qApp->notify() to update keyboardModifiers() and mouseButtons().
The commit also did not fix mouseButtons() after QPA event processing,
and missed keyboardModifiers() after QPA Tablet event processing.
This commit fixes all these shortcommings in b2363a935c.
Includes test case by David Faure <faure@kde.org>
Task-Number: QTBUG-26887
Change-Id: I8518b06c4ce86ea7b35120e3353a45ea2a81d356
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QWindowsStyle is soon to become an internal class.
Change-Id: I75424d6fc2f36fb0faace86c960d78a4ba305658
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Make sure we always emit the destroyed() signal before
we delete our children. This wasn't working correctly
for QWidget based classes, as the QWidget destructor
deletes all children itself.
Task-number: QTBUG-24672
Change-Id: Iecdff3489196271177edfeba1c4a2c5800e255af
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Since none of the platform backingstore implementations currently
implement this, skip trying to use the optimization for now to avoid
graphical glitches.
Task-number: QTBUG-27971
Change-Id: Ic6d263bb552ef0b4786910d71f965d26d810b7eb
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Sending enter and leave events to other windows than the grabbing
window is not logical. The policy should be that only the grabbing
window receives enter and leave events.
Changed the documentation accordingly and provided the necessary
changes to Windows implementation.
Also removed explicit leave event generation for widgets when
popup is opened as that is now redundant.
tst_QWidget::underMouse() test was changed to behave according to
new logic.
Task-number: QTBUG-27871
Change-Id: I127fb8685b4a4206d1a319f42cba491ec02bc8ca
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This was apparently done so in each of the widget_<platform>.cpp
in Qt 4.8. This then causes the cursor to be updated in
dispatchEnterLeave() on Windows and Linux.
Task-number: QTBUG-27871
Task-number: QTBUG-27585
Task-number: QTBUG-26424
Change-Id: Idf14cd96ccb36f7c2607853ed8b0024c36a5413c
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Enter handling requires knowledge of the mouse
position. Extend the enter handling of
QWindowSystemInterface to receive the position
(implemented for Windows, XCB and Mac), passing it
on to QEnterEvent. Dispatch QEnterEvent from
widgets code.
Change-Id: I49c07d2b1f46310c877017dd55d4cd7d636bdbce
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
While handling events for Widgets and Windows in QWidgetWindow::event
makes sense for other events, it causes QWidget::show/hideEvent to be
called twice when handled like "the rest". Having that as one case here
seems to be the cleanest solution. Removing the call to showEvent from
QWidgetPrivate::show_helper (as proposed in the bug report) causes
autotests to fail and thus is not a viable option.
Additionally the expected result for the task221221 test for
QDoubleSpinBox was reverted to the Qt4 value as Qt4 behaviour was
restored.
Task-number: QTBUG-27199
Task-number: QTBUG-26424
Task-number: QTBUG-22565
Change-Id: I0ac42b09b1a7618de042d27aa5dd1b3d9f30f552
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Seems that these tests are now passing on Windows, so remove the skips.
Change-Id: Id30ef544502f97f8bc84f35f635e39912da3afe8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QApplicationPrivate::leaveAfterRelease was not properly cleared when
mouse event handling was interrupted by a modal dialog, which caused
every mouse move over the modal dialog to trigger enter event to the
widget under cursor.
Fixed by clearing QApplicationPrivate::leaveAfterRelease if mouse event
without any buttons pressed is handled.
Task-number: QTBUG-27643
Change-Id: I4f31daa656bc643c88e5338282a671ae2077e255
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Changed the platform leave event handling logic in QWidgetWindow to
match platform leave event handling logic in Qt4, where last mouse
receiver is used as leave target only if last mouse receiver wasn't
a native window itself. In that case it is assumed to get leave event
of its own when relevant.
Task-number: QTBUG-27639
Change-Id: Id6edcd29754a15c959f18ab38b20d66e5d446510
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Qt::WA_UnderMouse is set/cleared when widgets get enter/leave events.
When there is a popup active, Qt::WA_UnderMouse should always report
false, but this was not happening, because existing state was not
cleared when popup was opened.
Dispatch a leave event for last mouse receiver when a popup is
opened to update the Qt::WA_UnderMouse state. This is roughly
equivalent to what happens on Qt4.
Task-number: QTBUG-27478
Change-Id: I7739e75727213e748ab2f42f1027d32325d89fb0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The disabled state was handled in qapplication_xxx.cpp before.
As the platform integration only knows about windows and
not widgets the state check is now done in qwidget. This commit
just adds key events to the list of events which are ignored
if the widget is disabled. This list also contains mouse events
for example.
Task-number: QTBUG-27417
Change-Id: I55949e1c1aaa992ba71df51c5b5e8177ec6f1e86
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Cursor dependant auto tests are currently skipped in various ways.
Some are checking PlatformQuirks::haveMouseCursor() that tries to
detect if the desktop environment is MeeGo, using obsolete Q_WS_X11.
Some are skipped if QT_NO_CURSOR or Q_OS_WINCE is defined and
some are actually missing the approriate guards.
=> unify by defining QTEST_NO_CURSOR in qtest-config.h when
appropriate ie. for platforms that have no regular mouse cursor
support or when QT_NO_CURSOR is defined.
Task-number: QTBUG-22551
Change-Id: I9a1e0e3156617945ae46226c79268955454c8a9a
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
For consistency, this behavior has been kept across Qt versions... Just
get rid of it.
Also fixes native child widgets not being notified of the change of
window handle (winId) when being reparented.
Updated auto-test.
Change-Id: I3616dc0f1c32a519d78a4846297d6d4a6e926fbf
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Remove QSKIP("Not yet sure why this fails."), the test is passing
on Mac.
Task-number: QTBUG-22321
Change-Id: I5f09d067b1cc837c5e3ada5bbd34091fe1fd723d
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Use the native parent's window if the widget in question does not
have one. This should be in line with Qt 4.8 using effectiveWinId().
Remove redundant code in grabMouse(QCursor).
Change-Id: Id6ab192e739221fe89f865f4d2f7a6d4671a190b
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Bring back code from 4.8 (Note that ALT-TAB is not received
as key event).
Task-number: QTBUG-27146
Change-Id: I6dd2e9c88fdc4c89d26dfaa8ab47deb2be451f25
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Introduced during Qt5 development and renamed to QInputMethod.
Change-Id: If6744648dc98b779e65c449ae32626db574181df
Reviewed-by: Joona Petrell <joona.petrell@gmail.com>
Commit 7808ec79 changes QApplication to synthesize
mouse events from (unhandled) touch events.
On Mac OS X this creates a conflict for two-finger
scroll swipes, which generates both touch events and
mouse wheel events: scrolling in QTextEdit will also
select the text.
Add a SynthesizeMouseFromTouchEvents platform style
hint that enables the event synthesising. Set to true
by default and false in Cocoa.
Change-Id: I1ffa5a141476aa38b81ce92a87eff676c7ec2276
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
When a stylesheet was set on a parent widget then in some cases it would
not get applied to all the child widgets. This was because the order of
the children list may have been modified while it was being set on
children. By making a copy of the list we prevent this from being a
problem.
Task-number: QTBUG-26321
Change-Id: Iea6bf72c69a0c39746f7ef5e7893dda5a93ed7e5
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QWindow::setWindowState is not supposed to set the window active.
The method requestActivateWindow() should be used for that.
When switching from and to fullscreen mode we're always passing
SWP_NOACTIVATE to SetWindowPos to not change the activation state
of the window. This is inverse to the old behaviour, which did not
have an effect.
Change-Id: I339337935cdad76b3ef252202e92177f37543038
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Previously synchronous window system events were
implemented by bypassing the queue and processing
the event immediately. This is not ideal since the
event order is not preserved - there might be "happened
before" events waiting in the queue.
Add QWindowSystemInterface::flushWindowSystemEvents
and change all handleSynchronous* to 1) queue the
event 2) call flushWindowSystemEvents.
flushWindowSystemEvents is almost identical to the
already existing sendWindowSystemEvents with the
exception that it does not call QApp::sendPostedEvents.
Move the common implementation to a new private function.
Task-number: QTBUG-20778
Change-Id: Ie98a83875bc0a14e335e36bed0dd9e0ed4a1dea0
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Use QTRY_VERIFY for the mappped attribute check.
Change-Id: I3cbde9122405bf7067f3702193e80636edc8c5c6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Introduce smart pointers to delete widgets and resources
to ensure tests are not affected by left-over widgets
also in case of failure.
- Replace deprecated QTest::qWaitForWindowShown() by
QTest::qWaitForWindowExposed() and use QVERIFY,
remove some hard-coded timeouts.
- Set some titles and object names.
- Add verbose debug output of event lists in tests
childEvents.
- Set minimum sizes on widgets to avoid Windows warnings.
- Stabilize GDIWidget, trigger on first event only.
Change-Id: I64119a2e7113e4a9f0156d00c72ce0935d03bb81
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
In touch event terminology the global position is the screenPos,
scenePos is the windowPos.
Fixes a tst_qdeclarativepincharea test failure in qtquick1.
Change-Id: Ie98fe12be8cbedc9b019913b066e7c4bce75278d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
While the qWaitForWindowShown(QWidget *) is inherited
from Qt 4.8, the qWaitForWindowShown(QWindow *) was introduced
in Qt 5. As it is identical to qWaitForWindowExposed()
and removed already, it can be deprecated in Qt 5.
Remove its usages in qtbase.
Change-Id: I28788d120ad687a49f02b2b44de6b38a2832fe5c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This patch implement the equivalent of
468626e99a90d6ac21cb311cde05c658ccb3b781 in qtdeclarative but for
QtWidgets.
If a widget doesn't accept a touch event, then QApplication gives it
another try by synthesizing a corresponding mouse event. This way
QtQuick and QtWidget behave in a similar way, removing the need for
platform backends to try to emulate a mouse event from a touch event
unconditionally.
Also add relevant unit tests and adjust old QApplication ones.
Change-Id: Iddbf6d756c4b52931a9d1c314b50d7a31dbcdee9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The previous API was hard to use (global function, no type safety,
manual chaining), and confusing (app vs dispatcher split only made
sense on Windows). Installing and removing out of order would have
the risk of setting back a dangling pointer (crash). Meanwhile QPA
added type safety, and this new API models the QObject::installEventFilter
API for ease of use. The virtual method is in a new interface,
QAbstractNativeEventFilter.
QPA was even calling the dispatcher event filter with QPA-private event
classes, which made no sense (refactoring leftover from when the code
was in the dispatcher). Now the QPA plugins trigger the qcoreapp event
filters with the actual native events directly.
Change-Id: Ie35e47c59c862383bcaf857b28d54f7c72547882
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
- Implement waitForWindowExposed() for toplevel windows.
- Implement waitForWindowShown(QWidget *) and mark as
deprecated in line with waitForWindowShown(QWindow*).
- Use in tests.
- Simplify tests (collapse waitForExposed, setActive
into setActiveWindow, waitForActive), remove most
hard-coded timeouts.
- Stabilize graphicsview tests by using waitForWindowActive.
Change-Id: Ic7c061e2745b36f71a715ee4e47c0346b11a91e8
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
When turning off fullscreen mode and restoring the widget's geometry
we must inform the QWindow about the geometry change synchronously.
Otherwise QWidget::geometry() will return the old value.
Using the same technique for the state transition to fullscreen mode
without sending a separate resize event.
Autotest: tst_QWidget::saveRestoreGeometry
Task-number: QTBUG-26421
Change-Id: I869e36cd302d9a94e398f48949ab3cb7ee9cdf51
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
When mixing native and regular widgets in same QMdiArea, some
subwindows didn't properly get set native. This was because
when a native parentless widget was given a parent, it wouldn't
enforce native window on the new parent and its ancestors.
This happened because window flags were adjusted too late in
relation to createWinId() call in setParent_sys().
Fixed by moving the createWinId() call to its proper place.
Also removed some old Q_WS_* ifdeffing in QWidget::setParent() that
masked some native enforcement code.
Additionally removed few QEXPECT_FAILs from QWidget autotest now
that those cases work correctly.
Task-number: QTBUG-26424
Change-Id: Ib6f9d0531e5c7299e2c307734d49c81f1ffa9713
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
To let this test pass, a bunch of test cases had to be disabled.
Task-number: QTBUG-25300
Change-Id: I26bc08f366c43fb2bf3ba42a5fcbeb3888ed02c0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
QTBUG-8911 has been fixed some time ago.
Change-Id: I19dae0571b1829f6b3b797f7e0ec5c24a4241db8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Prevent a crash by giving the widget some time to show up.
Task-number: QTBUG-22326
Change-Id: Idaa23b21121e7c4f7098e8d51efd313bcc467e9a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
The part of tst_qwidget::reparent() that "makes sense only on Windows"
is antiquated at least since the introduction of alien widgets.
It basically tests if QWidget::winId() returns a valid window handle
(has been replaced with winHandleOf here in the meantime).
This is always successful, because winId() creates a valid window handle.
Change-Id: I52c370e26fd9b34861bd4d52c12dded243382d43
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
We cannot use QWidget::grab for widgets that have WA_PaintOnScreen set.
QScreen::grabWindow copies the real screen contents for us.
Change-Id: If1f6233ec48bcb2b941ea683c56ce71a39642e67
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The pointer grabbing leads to fake Enter events being sent to the
Qt::Popup window, preventing it from closing since QWidget::underMouse()
returns true. We should only send Enter events if the mouse is actually
inside the widget.
Change-Id: I4ba3fb08943580f93ad4337ff0227becd647767e
Reviewed-by: Laszlo Agocs <laszlo.p.agocs@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
We'd like to decrease the default timeout for tests in the Qt Project CI
so that we waste less time waiting for hanging tests.
Tests which genuinely take a long time to run, such as these, should
have their timeout explicitly set in their .pro file.
Change-Id: I4fe6249e9efa764b230251d73a1115c24411e168
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
The main reasons for doing this are:
1. _qpa.h end up in the master QtGui include file. QtGui is meant for
userland applications. qpa code is neither binary nor source compatible.
Inadvertant use of QPA api makes the user code binary-incompatible.
2. syncqt creates forwarding headers for non-private header files. This
gives people the impression that this is public API.
As discussed on the mailing list, even though QPA api is internal and subject
to change, it needs to treated differently from private headers since they
will be used by in-qtbase and out-of-qtbase plugins.
This commit does the following:
1. The _qpa in QPA header files is dropped.
2. syncqt now treats any file with qplatform prefix as a special file and
moves it to qpa/ directory. The recommended way of using QPA API in plugins
is: #include <qpa/qplatformfoo.h>. This allows the user include QPA API
from multiple modules (for example, qplatformfoo might be in QtPrintSupport)
3. The user needs to explicitly add QT += <module>-private to get access to
the qpa api.
4. Creates compat headers for the olden style qplatformfoo_qpa.h and QPlatformFoo
includes.
This commit does not change the cpp filenames. This requires a more careful
merging of existing non qpa cpp files and existing cpp files on a case by
case basis. This can be done at anytime.
The following files are not renamed as part of this changed but will be fixed
as part of a future change:
src/gui/kernel/qgenericpluginfactory_qpa.h
src/gui/kernel/qgenericplugin_qpa.h
src/gui/kernel/qwindowsysteminterface_qpa.h
files were renamed using
for x in `find . -name "qplatform*_qpa.h"`; do git mv $x "${x/_qpa.h/.h}"; done
for x in `find . -name "qplatform*_qpa_p.h"`; do git mv $x "${x/_qpa_p.h/_p.h}"; done
includes were renamed using script
for file in `find . -name "*.h" -or -name "*.cpp" -or -name "*.mm"`; do
sed -i -e 's,.*#.*include.*<\(Qt.*/\)\?\(QPlatform.*\)>,#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.*"\(Qt.*/\)\?\(QPlatform.*\)",#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.* "\(qplatform.*\)_qpa.h",#include <qpa/\L\1.h>,g' \
-e 's,.*#.*include.*"\(qplatform.*\)_qpa_p.h",#include <qpa/\L\1_p.h>,g' \
-e 's,.*#.*include.*<\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)>,#include <qpa/\2\3>,g' \
-e 's,.*#.*include.*"\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)",#include <qpa/\2\3>,g' \
$file
done
Change-Id: I04a350314a45746e3911f54b3b21ad03315afb67
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: Ie8ac500f2f8ebe99b7525feaa7b39247e641a461
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
These tests were disabled when trying to get CI working on Mac OS
because they asserted or crashed. Now that CI is working well on Mac
OS, start running these tests again, initially as insignificant tests.
CI results will then be used to determine whether the tests can be made
significant.
Change-Id: Ife411e6b8c84ade45c865ef35f3ae0071d6f8d2b
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Remove Q_WS-ifdefed sections and switch by platform name instead.
- Remove Q_OS_IRIX and Q_WS_QWS conditionals
- Fix deprecated QPixmap::grabWidget(), QPixmap::grabWindow()
calls.
- Use QTest::qWaitForWindowShown() instead of
qt_x11_wait_for_window_manager().
- Rewrite some platform-specific code using QPA interfaces.
Change-Id: I29ce4c4f3e5c05edddfd018dc2eabdd77738eb23
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
WA_PaintOutsidePaintEvent is only suggested to be used when porting Qt3 code
to Qt 4 under X11 platform. and it has been broken now.
Change-Id: Ie4297b2a449f1055ca10ada9efb930e6018b1efb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Focus change happen as: FocusAboutToChange event -> focus change
-> FocusOut event -> FocusIn event.
Input method need to have focus when calling commit(). Notification
on focus about to be lost allows QWindow implementations to commit in
time.
Also changes QWidget documentation to match code reality.
Change-Id: I17a8a374a33dd700909f79e370b42348869261a6
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Change-Id: Id565fa1eb8fe13c62a93a5afa39a5701ce7b20ea
QPixmap::grabWidget is deprecated, which calls QWidget::grab() at present.
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This event was completely unused.
In addition it leads to crashes on linux when
sending the Destroy accessibility update.
The Destroy event on linux would still query an accessible interface.
That in turn would trigger the event to be sent.
Change-Id: I8915527de067b8b70ba41b1361e3ef5d12866d7d
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
QInputMethod better describes what the class is about, input methods
in general, be they panels or just composing input from key events.
Compatability headers added for old name. Not bulletproof but should be
enough to get transition done.
Change-Id: Iefde6e7ccb1ec4a3b226cef3469089e751c60fc1
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Moving away from deprecated QInputPanel inputItem.
Small behavioral changes:
- On focus proxy widgets, disabling WA_InputMethodEnabled on
proxy will no longer disable input method for proxy target.
- setEnabled(false) on proxy widget will no longer disable
input method for target as a special case.
Change-Id: Ifb5b7144d29bd3aefdde7cf4a0bd396db06e67e2
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
tst_qwidget.cpp will not build/link without tst_qwidget_mac_helpers.mm,
so re-add it to the build as well.
Change-Id: I55130f62c215c4b82683d90456e31fdb09f833a8
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
This will return the NSWindow* for the given QWindow*. Port the QWidget
autotest helper to use the native interface and the "nswindow" resource.
Change-Id: I754b7e9288690ac3c99c3ec65c5526d5fe121234
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Qt is Cocoa only now, and does not use HIView anymore, making this test
is meaningless. The testAndRelease() and createAndRetain() helper
functions are also no longer needed.
Change-Id: I26180a4670c8e7445741d3aab510c4da7b65388c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Use the C++ boolean constants true and false instead of the C macros
TRUE and FALSE (which are actually integers), and use QVERIFY instead of
QCOMPARE for verifying simple boolean expressions.
Change-Id: Ie76dfcab6722df6b93b3fa62b0f3437901482932
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Remove the (-no)-qt3support options from configure, and remove the last
remaining references to Qt3Support, QT3_SUPPORT, and
QEvent::ChildInserted.
The compatibilityChildInsertEvents() tests in tst_QObject and
tst_QWidget have been renamed to childEvents(), which is a more
appropriate name.
Change-Id: Id0b45e9b177efcc8dceee8c9ed8afafedeeace2f
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed code was already disabled when first committed in January
2009.
Change-Id: I00a82f2e673fee76869cc76d756c36d081da2d2a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Remove some "#if 1" directives and a line of debug code.
Change-Id: Ib34f5b65470a24ee499799525ffe0645ccc117fe
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
There are two cases where a QCOMPARE may fail on some platforms. Rather
than disabling the QCOMPAREs with "#if 0", use QEXPECT_FAIL so that we
can look in the CI logs to see which platforms fail.
Change-Id: Ife93c8032e01a04e8068bf213e2040778c12f711
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Compile without -qpa.
- Make Q_WS_QPA-#ifdefed sections the default in the code
- Replace some Q_WS_ by Q_OS_
- Add ### fixme for places that need checking
- Remove qpa conditionals from .pro files.
Change-Id: I6ea930afc0c236cc12a7b7e95f1b8a1c24b3a513
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I3c1d993d5682db913aadc267d98a638061f393d6
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The previous commit removed SkipMode from the testlib APi. This commit
removes the parameter from all calls to QSKIP.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I21c0ee6731c1bc6ac6d962590d9b31d7459dfbc5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
