this function is called only from library TEMPLATEs, and always with
exactly one word as the only argument.
Change-Id: I6282e3826791f89e6cf89dde625c8166e4e56028
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... instead of as a fallback in default_post.
it was this way in qt4, and it requires less code to be written in the
end. we are already doing it for debug/release as well.
Change-Id: I6e02849d61d14a18375cf64a5990768931ebac48
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
there is mightily little point in unsetting variables right before
unconditionally assigning to them.
Change-Id: I24c1814ce38bf9aab4496679b1a670f3cd55c536
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
all non-installed tools are properly registered, so they don't need the
fallback. conversely, we can assume that non-registered tools are
already installed.
this enables us to build docs in qtbase after an incremental
build+install up to qttools.
Change-Id: I95a55f6b84e01885bcf6dd656caf0dd2b679bb73
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
-rpath does *not* imply -rpath-link when x-building:
ld(1): "Searching -rpath in this way is only supported by native linkers
and cross linkers which have been configured with the --with-sysroot
option."
it doesn't hurt to have the "excess" -rpath-link for native builds, so
just remove the cleanup.
Change-Id: Ic39c1f4d6c2e3770d43a5ed3e56cf89a146edf85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
if the libraries are in a non-standard location, but no rpath is used,
rpath-link is needed. this is often the case for non-prefix builds
(which have no forwarding pris any more).
as we cannot store absolute paths in the final pris, we need to store the
module names, and resolve them only at use time.
Change-Id: I1538b5d531611c76a2d7058a3b2ff683bdcbe427
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
complementary to QMAKE_RPATHDIR. this avoids that we need to sprinkle
linux/gcc specific code all over the place.
Task-number: QTBUG-27427
Change-Id: Iebafd1749d1a0d803704902473df8c743f074ddc
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
On QNX e.g. you'll end up with a Qt configured without pkg-config support
by default. Once you try to compile e.g. QtWebKit which contains a check
like packagesExist(libudev) the system pkg-config (see default branch
of pkgConfigExecutable) will be called without any special config sysroot
or libdir. Thus libudev will be found in your system host, even though
it is not available for the cross compile target. This leads to compile
errors as described in https://bugs.webkit.org/show_bug.cgi?id=98032 .
Change-Id: If1474cb3b3f3b71fad7269e4aedd4e10f70a9b2a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This ensures that for example the platform plugins get properly
re-linked when the static platform-support lib changes.
Change-Id: Iad493d4de30d6f6977f80aa56d0b27d05e9e3770
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the fallback path wouldn't account for a sysroot. as there is no clean
way to implement that, rather remove the fallback alltogether and make
the rpath a mandatory part of modules.
Change-Id: I6f2bd6e36889be2f61e17a579174380aa3c6622d
Reviewed-by: Romain Pokrzywka <romain.pokrzywka@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the respective flags/defines need to be prefixed with a minus sign.
Change-Id: I8a3a46254f90d4ecdbd692a0eca635038691d078
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
set DYLD_FRAMEWORK_PATH instead of DYLD_LIBRARY_PATH
Change-Id: I9849f12063b8c7a45d040c087f4611c3a48180b8
Reviewed-by: Johanna Äijälä <johanna.aijala@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it is a bad idea to extract plugin paths from library modules.
instead, just collect plugin paths from all known repositories.
Change-Id: I527325f20e9cf98ae974997530af1b2893537e5d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The qmake function prepareRecursiveTarget can now be used both by the
existing logic in default_post, as well as future recursive targets that
will be needed as part of the modularization of documentation builds.
Change-Id: Ibc72c3e224cb57c9f1796de3b04fda9de663dbb4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The wrong variable was used when reading the module settings
Change-Id: If35dc9694240a68393b24d7dba72520108cb9ac3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
so it's available for other users as well
Change-Id: I2d5a14ae427575c07321ac532b13ee03308b837f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it's been superseded by the QTTOOL.* module stuff.
Change-Id: I01c9fc3ebbb22111bfb03f82693c7cf08b5fc9d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this puts the whole logic of assembling those paths into qt_module.
Change-Id: Iafbe3969e3092e294bdb8243b2dffa7a899a7eb8
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
a module's project file may set MODULE_INSTALL_LIBS before loading
qt_module.prf to have an alternative RPATH linked into the users of that
module.
this is relevant only for linking against non-installed -prefix builds
of that module, as otherwise .libs from the module's pri file is used
for rpath.
Change-Id: Ib240e748cf130a71a5991dc643c368a983092ead
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
forwarding module pris get rpath_link{,_private} fields, which are
used accordingly by qtAddModule().
Change-Id: I0abc2dc8b1e8744dbf7f439aa7fed9ae159c2c74
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QMAKE_LIBDIR and QMAKE_FRAMEWORKPATH have the downside that they
always effectively end up in LIBS, which makes for weird prl files.
Change-Id: Iaf61b0038504ff91ae5ec7f9b1255fe3a2d134f1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this saves some repeated calculations. also, it's nicer to have most
logic in one place.
Change-Id: Iea362d40f5e6203709ced94d29ca61a4163b8e69
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the variable name is a function parameter now
Change-Id: I46f3ce37c157312e7f70291a0cef2d666d50664c
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is handled the same way as the QT variable, only that the actual
libraries end up in LIBS_PRIVATE, not LIBS, which means they don't end up
in prl files.
the handling of the two variables is entirely independent, including
independent dependency resolution, so some libraries will typically end
up twice on the linker command line. this is not a problem.
Change-Id: I257ad0d414bf273c08a7bd6a874fe9ddb7356009
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
the system path separator and shell are bound to the host system
(system() will use cmd even on mingw with sh.exe in path).
the makefiles otoh may depend on what the qmakespec defines.
consequently, add $$system_path() and $$system_quote() (for use with
system() & $$system()). $$native_path() is renamed to $$shell_path() and
should be used with $$shell_quote() to produce command lines in
makefiles.
$$QMAKE_DIR_SEP needs to be applied to Option::dir_sep right after
parsing the spec, so it is available to $$shell_{path,quote}().
Change-Id: If3db4849e7f96068cf03a32348a24f3a72d6292c
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
qtAddModule() skips adding standard library paths to LIBS. however, as
processPrlFiles() didn't know anything about that, it would not find the
prl files of qt libraries in these paths.
so centralize the definition of these default paths (we should actually
ask the linker for them) and use it in both places.
do the same for the include paths for symmetry.
Change-Id: I7e3692dc2d1c2d0c97a9151d15887b1263de137a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
we need to make cmd escape the expanded output, so it doesn't confuse
its own command line parsing (which happens later!).
Change-Id: I0c2c71d276c0aebe3c2163f7f08db8050a14d7ce
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
tools like idc and lrelease are outside qtbase/bin and depend on libraries
which are not in any search path, so we need some way to let the modules
announce the locations (qt_tool.prf) and use it (in qtPrepareTool()).
Change-Id: I98d5109cbee5e745d86dde94e3dc791d42edc3ec
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
On Mac the framework include paths were generated wrong.
The $${MODULE_NAME} was missing.
This patch fixes the framework include path generation.
Change-Id: Ic0e8d69ac7ac63be755302dc822c28240c9bc3d2
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
autotests often need private headers (especially with qpa headers now
being private) and have no compatibility requirements, so it makes sense
to just use the privates of requested modules.
this also suppresses the useless warning about using privates, in case
they are still explicitly specified.
Change-Id: I9e499bedcf6ef25777283ff1432cef7254e9093a
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
each qt module comes properly declared and located, so there is simply
no point in performing a search.
Change-Id: I86fad21bb8e128b85f1000cc116cc44a23642eb4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
that way we can theoretically support modules outside $QTDIR.
also, it's just cleaner.
Change-Id: I6139ebc7328b64ace8552b3e54f9a8c69248ceec
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't prepend the paths, as this will only mess up building of
subsequent modules (e.g., building qtdeclarative against an installed
qtbase would pick up the headers from the qtdeclarative previously
installed into the same directory as qtbase).
for frameworks this was a rather pointless exercise in the first place,
as their headers are properly isolated anyway.
however, make sure that we don't add system locations to the search
paths, as this is a) unnecessary and b) messes up subsequent libraries
in non-standard locations which want to shadow versions in standard
locations (pkg-config .pc files which add standard paths are considered
broken as well).
Change-Id: Ie1dc65d4767e98e1df6e49012505141935a6c704
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it's used by people (in particular, qt creator), so it would be not nice
to just delete it entirely.
Change-Id: I6bd849d00ebfe3b9b126e01a6d1c6e7c6584d8ac
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this cleans up a lot of hacks supporting the build of qt, including the
last bits of $QTDIR.
Change-Id: Id119886ed8097967dad6cf86ebd4e71d90c42841
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Doing so works fine on Linux as g++ version there silently ignores
this. However, the qcc toolchain for QNX barfs.
Change-Id: Ia236910adc09dc1653e4169e20476b69c2de62ab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
