The existence of the manifest backup is used as a marker to decide
whether to embed the manifest in a second link step or not.
If it's present, the embedding took place in the first link step.
If it's not present, we must link again incrementally.
That logic was implemented faulty.
Change-Id: I10154dbbbe70c7981795ac66d46a166907ba13ec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The rc file is in the same directory as the manifest file.
Therefore the include must consist of the filename and must not include
the file's path.
Change-Id: I4f5ac11b131f39ea8c425aca93fcf82d150c0204
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
By putting object_with_source into CONFIG one could force qmake to
output each object file into the same directory as its source file
came from. This was a rather nasty work-around from Qt 3 times to
support source files with the same file name in a project.
Unfortunately this doesn't play nicely with shadow builds.
Change-Id: Ie79e14d36ba6eac4219edc14ea75ab6a96f9ea96
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
we cannot just completely stub it out, as then there are no dependencies
on whatever targets we actually *want* to be built.
Change-Id: I32a92fa937d099c153a0082feae5d23e3998ba48
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it works better when it castrates the app template, rather than staticlib
Change-Id: If52960fb48d770e8ec096c66b579539512b8d299
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
When embedding manifests we modified the EXE/DLL after linking using
the manifest tool. This breaks the incremental linking feature of MSVC.
The MS way to embed a manifest without breaking incremental linking is:
- let the linker create the manifest file,
- create a resource that contains the manifest file,
- invoke the linker again to embed the resource.
The embed_manifest_{exe|dll}.prf files have been removed.
All manifest logic is now in qmake's nmake makefile generator.
With QMAKE_MANIFEST one can specify a custom manifest file that gets
embedded without disturbing incremental linking.
Task-number: QTBUG-22718
Change-Id: Idb9d2644a0577b2002cbdd2d62b695b9171b1bd5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
instead of re-assembling a list from the variables, take the original
command line minus some explicitly stripped out options. this is way
less code and poses no synchronization problem between the two parts.
as a "side effect", variables obtained from $QMAKEFLAGS won't multiply
with each makefile nesting level, as the generated command line won't
replicate data obtained from the environment.
Change-Id: I5d1ce0f11efb338f60405529f9818910103b1b0e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this adds a .base "member" to the install "structure". if specified, only
this much is stripped from the front of each element of .files, rather
than the entire path, to obtain the target filename.
Change-Id: Ic39fcf71c4ad874ffabbbad113be9cdc6e3f7260
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't make a single string, but a string list which is join()ed in the end.
this is a tad slower, but the code is way easier to work with.
Change-Id: I1ff7168c2770998761a6081be8080c743ddc94a1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
make a proper stringlist of commands, and join it in reverse order
only at the end. the reversal ensures that we can cleanly fold up
directory hierarchies we may build.
Change-Id: I9a241361588a6965283aec5258e1d622b35514e0
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
The files were grouped into the relevant filters but the filters
themselves were not added. This now ensures the filters are added to the
vcxproj files so they appear grouped correctly.
Task-number: QTBUG-26755
Change-Id: I7d2c6fa96dcbb0496fd9d1bb1d01e7dd660052f4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
otherwise the second installation on unix would be bogus.
Change-Id: I162533ee262c6820e7e2d4710b5342cafecd9d59
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
we just determined that the file does not exist, so it's entirely
pointless to query its type from the file system. consequently, the
respective fallback branch would assume a regular file anyway.
Change-Id: I42590ffc2a5f650fb430a9398cb1859217ed4350
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the value is still re-processed numerous times, end each "exit path"
does own escaping, while not every path can deal with an escaped path.
Change-Id: I0bf4a043809bf4b7877d02e5d8dfe8f794a7dd00
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
qmake -project was always outputting a project with subdirs template, because
Option::h_moc_mod was not being properly read, causing addFile() to misbehave.
Change-Id: I2c07aea132f9885eabf188de993b0fabfb352886
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
the paths may be explicitly added before some other paths, so it would
be wrong to remove them.
Change-Id: I68ae93fd307afe14a07a0f24de952783950b5bea
Reviewed-by: Holger Freyther <holger+qt@freyther.de>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Remove references to an old compiler that has not been
supported for a long time. Also remove Borland specific
configuration flags which have no meaning elsewhere.
Change-Id: I3634a52b78f737ea972073e14c2b6669dcd0ae63
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
there is no reason why private libs should not have prls resolved.
the two variables are resolved independently, so it's possible that
(even more) libraries will appear duplicated on the linker command line,
but that seems easiest for the time being.
Change-Id: I9070ba53808a0661fa72949db8111106b7aca487
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the visitor-pattern like approach is not needed any more
Change-Id: I990db681cbeee91d89ecba97745a8104595247e7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it's more elegant, and more similar code is better.
Change-Id: I2b8b036cb70a932fd171e23cf7d3389188401924
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it wouldn't actually *do* anything, as l is not a reference. i cannot
figure out the original intention, so let's just drop it.
Change-Id: Ic0a3457a1872cde827259ee5530959120456e934
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the unix and windows variants don't rely on it.
not making it purely virtual only because the project generator inherits
MakefileGenerator as well but does not need an implementation.
Change-Id: I80099b3f5d07cd037b408cf1099c58ff3a2904cd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
i see no reason why they should deviate
Change-Id: Iaa0445b79a95d348f51df74a74c7c89216c468ec
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
given that nobody noticed so far how broken this was, this doesn't
appear to be a particularly common path. but anyway ...
Change-Id: Ic17b239d724a4d69ff414a24be2e8588732bc8dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the code wouldn't actually *do* anything with them, because it was
completely broken. didn't seem to hurt, so just remove it.
we still need to parse -framework, though, so we don't do funny things
with its possible argument.
Change-Id: Ia3266538612d3314a72f4965ee9c1ea2d3046ac9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
dealing with the directories separately doesn't buy us anything. it's
easier to mix them into the libs, as that contains some paths, too, both
in projects and in prl files.
this brings the windows generators in line with the unix ones.
Change-Id: I1f58f7edd8e21d28bfabf04384bac2e315aaf446
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
there doesn't appear to be a point in having the function virtual; the
part in the mingw generator can be inlined somewhere else just fine.
Change-Id: I50d66d505095b43fce601928c6240a684389a4b7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
they are not re-implemented anywhere
Change-Id: I444a967bb39ec6b5994747c9fa3f605b4c53ce4f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
merge their content as early as possible into QMAKE_LIBS. that's where
they ultimately end up anyway, and this approach is way simpler.
QMAKE_FRAMEWORKPATH_FLAGS is also used for the compiler flags, so it
remains as such in this second function.
Change-Id: Idc3ba4a9b2569fce3252d5f5ddc3f6ebf93650cf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
findLibraries() now consistently expands to the linker-specific syntax,
and processPrlFiles() expects that syntax.
Change-Id: Ifd7b51d01378c91d6f2b132aca33629f21ca72f9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Use XOR instead of OR in order to avoid saturating all bits when computing the
hash value.
Change-Id: I50b1a044eb827239dae1c04732ca6a065f6233b4
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
yet another symbian remnant (building windows arm executables for the
simulator).
This reverts commit 5c88141ed0b25d8ab9318bf4cb5dda54b90b2ce1.
Change-Id: I6eb147c0e2710eba09a4339fa4a08a5b08f8dab3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
unlike for the unix linker, this does not matter for the windows linker,
but keeping it consistent has advantages.
Change-Id: Ib9b9efa18c31d87c026d3cac5a8737f4612ad1c0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
libraries and related flags have no business in that variable, by
definition.
Change-Id: Ic958a3e082a498945ab56bc12ec05d4083ee43a5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
this way QMAKE_LIBS{,_PRIVATE} can be treated the same as in all other
generators, which allows us to:
- make the windows generators' findLibraries() be more like the unix
version
- dispose of QMAKE_INTERNAL_PRL_LIBS handling while reading prl files
(because the output always goes to QMAKE_LIBS)
- as a side effect, QMAKE_LIBS_PRIVATE are not subjected to prl file
resolution any more, which is again consistent with unix - the
correctness of that needs to be assessed separately.
Change-Id: Ie9bc04d117eff6a7cde846677f98acf3c64aa6ee
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
the function was already called long before. if it really needs to be
called again, it's a) probably affecting the other windows generators as
well and b) the actual problem should be fixed instead.
This reverts commit d50c3c6624b2343e42d0df4b72212d9ced8f3682.
Change-Id: Iaa2007640fbc9acdc50ba3b0681efeb0d184f224
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
the libinfix provides a way cleaner solution to that. i don't expect it
to be still actually used anyway.
Change-Id: I051522ec3abb3d92c529b5462b8514a706aa2ba1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
it's a tad insane to expect the user to do that
Change-Id: I75c68f2a28656c9ba2e3fabcc79718b899b29ce7
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
qtAddModule() skips adding standard library paths to LIBS. however, as
processPrlFiles() didn't know anything about that, it would not find the
prl files of qt libraries in these paths.
so centralize the definition of these default paths (we should actually
ask the linker for them) and use it in both places.
do the same for the include paths for symmetry.
Change-Id: I7e3692dc2d1c2d0c97a9151d15887b1263de137a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
XQMakeSpec is not available after configure
but the QMakeSpec contains the correct value
Change-Id: I6cd4da8b0d6c95565f31842c17611ffd361bc010
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
i have no idea why that was done (the commit message says "not sure why
it works elsewhere"), but it makes no sense whatsoever, specifically
doing it only on mingw. probably some workaround, as usual. the
de-duplication is broken by design anyway.
This reverts commit 7a6302c2baf6861fdaf65992b71a7676859860c2.
Change-Id: I6edecaa062570e59eccd24d50919ba132e65a403
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Don't hardcode the "qt_config" EXTRA variable and use QMAKE_PKGCONFIG_VARIABLES instead.
This allows qmake create the .pc files that are unrelated to Qt.
Change-Id: Ic72005e8819a15f6c50f3aaf79424a247fba20af
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This has been deprecated in Qt 4.8.0. Use X.files instead.
Task-number: QTBUG-3216
Task-number: QTBUG-25106
Change-Id: I581321591291118a13403e92da5997497e12c3fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this function is not meant to be used for debug statements
Change-Id: I84575e64814e2c9fd2e09c33fc680d0e6648f4ea
Reviewed-by: Rolland Dudemaine <rolland@ghs.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
the feature was implemented for the abld/sbs2 generators only, and is
of course undocumented.
this reverts most of commit e795e61ef93f8080f9938ac49f2fca306644af85.
Change-Id: Ibd1726b036ce6c45f8e678ea996218f774f8aed2
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
the as-we-go dump is sufficient (and usually necessary to actually find
the problem). if only the summary is interesting, the -E option can be
used now.
Change-Id: I9e34c6db9dcb99b38013c4d0cb80b8cb88ca36b5
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
get the actual spec path directly from the project - the specs in Option
are not necessarily resolved.
Change-Id: Ia2bf2199c5269aa5b5a9d4c38de36171f25d448b
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the project evaluator becomes oblivious of the target mode.
the mode is set up in spec_post.prf according to the spec.
$$QMAKE_TARGET contains the feature suffixes to search, and is also
contained in $$CONFIG.
the target_mode variable itself becomes private to the Makefile class.
Change-Id: I3c06d9dab536b753343cec6c5c491d3203e50bd8
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
it wasn't really wired, so the only effect it had was disabling the unix
scopes (despite an attempt to override that in the spec, which probably
worked before qt 4.6, and will start working again soon).
Change-Id: I95daff75b508edaf83a8a06fd327350acd62b124
Reviewed-by: Rolland Dudemaine <rolland@ghs.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
(some of) the generators are (moderately) x-platform, so it makes no
sense to nail the host platform to a generator (and thus a spec).
overriding the host platform is only a debugging mesasure anyway, so one
can use the (now undocumented) -unix/-macx/-win32 options for that.
Change-Id: If2a059f1feeb2c726e5838625ede1c7add829985
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
they have been deprecated long enough, so we can mess with them now.
don't make them set the target mode any more; the makespec can do that
autoritatively. instead, they can be used to override the host mode for
debugging purposes.
Change-Id: Ife5fdcf4f1b6b926901a80896ac92b7d821278d1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the only callers which used non-default arguments are gone now, so remove
the arguments entirely. this also enables us to re-enable result caching.
Change-Id: I62f76e17e531a4eeafddb9b29716ca0a0eb3dbea
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the specs in Option are now only fixifiable absolute paths if an actual
path was passed on the command line - otherwise these are just names,
and we should pass them on verbatim.
Change-Id: I5b3535dadf2d6b2b3116331e6636f6e363a5361f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Integrated the checksdk tool into qmake and made
the makefiles selfcontained, so configure make, is now
enough to build qt for wince
Change-Id: I29076702eca2ec23d4d06bb3d5c5cef9d4f95161
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
instead of making the "real" targets depend on the makefiles, add
conditional makefile generation to the targets themselves.
this causes makefile generation to follow the recursion order determined
by the project, which is important when dealing with prl and module pri
files.
a side effect of this is that qmake and make calls are interleaved now,
which is entirely different from a 'qmake -r' run.
on the downside, calling make with multiple targets which operate on the
same subprojects without prior makefile generation will make a mess, as
the qmake calls will be racing. this should be no problem, as qmake does
not generate recursive targets where this would be useful - at least by
default.
it is not sufficient to just order the creation of the makefiles
non-recursively (e.g., by using gnu-specific order-only-prerequisites),
as an interrupted and subsequently resumed build would happily skip the
nested makefiles.
workable alternative approaches would be walking the entire tree in a
pre-pass to ensure makefile presence (which is incredibly slow) or
creating additional stamp files only after recursing and having the
makefiles depend on them (which is ugly).
Task-number: QTBUG-23376
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Change-Id: I88d3e7610215677d362026de316513d3bea04b06
instead of hard-coding platform differences, use a variable.
Change-Id: I20e98811ad5f07429148c6f88aedbabc3ba58fff
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
everything in the projects should be normalized. only the makefile
generators need to adjust it to the native form.
Change-Id: I06a4e997f32134d13949ec4a9dd1b44367aab7cb
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
no point in entering the outdir and leaving the indir.
this doesn't really matter except for the obsolete borland generator,
but whatever.
Change-Id: Ieb4e4c549ebd65f99e4d00819c52822968b060a4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the code above already deals with the differences
Change-Id: Ifb799e46f5187e7bd3d0f0169e868ad267bcfe23
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
no need to define an obscure variable for it. just inline it.
the assignments are left in for compatibility with hand-written commands.
Change-Id: I9bc3914e2c4116f3b8fe00a421ca0f036bb7e214
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
so far it would rebuild the makefiles one level down only, which is
somewhat arbitrary and not really helpful.
Change-Id: I5fe01f379ecc4b210610a674d7df7dfc18131eef
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
that's consistent with other projects. 'qmake_all' can be used for
recursion.
Change-Id: Ie6d620f7a3e0e28d3f2f82f01ca94c2f46137c68
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
$(MAKEFILE) is our own file, and using it would wreak havoc if it was
named anything but Makefile.
Change-Id: I51cae2014a85399b409f18788f864ff2a82e493e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
if a "subdir" project added a project file from the same directory as
itself, "/." would be appended to the path, which is obviously not useful.
Change-Id: Ia733dedb57e568c5cf9a3d5eb29727176a5142c5
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
webkit does some unholy tricks with the ordering of qmake and make
invocations, so it does not work with qmake -r. to make it still
possible to integrate it into the qt5 aggregator project, give it a
chance to "break out" from the recursion.
Change-Id: I926836e44c0e0790cdd90e6b0c8f766dccc33c4d
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this is the source dir equivalent of .qmake.cache and can be checked
into the repository. it can be used to make project-wide settings, or
just to signal the presence of an mkspecs/ directory.
Change-Id: I5f1cebad2aa2a89e78089341b2051613b6b7a613
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this allows the creation of aggregator projects, like, say, qt5.
this is not expected to have a negative impact, as no project could
reasonably expect a nested .qmake.cache to *not* take effect - in fact,
if the project was processed stand-alone, it would already use it.
Change-Id: I33f2935d309baba7e95465f2fefb8231c4f03eda
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
properties are now split into a write location $$[FOO] and a read
location $$[FOO/get]. the write locations are hard-coded and configurable
via qt.conf/Paths as before, while the read locations are configured via
qt.conf/EffectivePaths.
this finally provides a clean solution to the problem that during the qt
build itself tools and libraries need to be taken from somewhere else
than they are installed to.
Change-Id: I956c43bd082afd465e690fe75d0bee3c2c0f7c25
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
make_first really means the same, as the default target is 'first'
which immediately invokes make_first.
as a nice side effect, this fixes ALL_DEPS not being used by the subdirs
template's default target - make_default wasn't special-cased in the
right place, while make_first is.
Change-Id: I946cea3b2dae198eda61d31dbd19c6ccd15deac7
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
when qmake runs into the new option(host_build) command, it will restart
the project evaluation with a host spec.
the new default host spec is called default-host (gasp!). it is
overridden with the pre-exising -spec / -platform option, while the new
-xspec / -xplatform option overrides the pre-existing default spec.
specifying -spec but not -xspec will set the xspec, too, so the behavior
is backwards-compatible. same for the XQMAKESPEC override read from
.qmake.cache and the environment variable.
the cleaner solution would be adding -hostspec, to be symmetrical with
the override semantics, but that would deviate from configure in turn.
Change-Id: I4297c873780af16ab7928421b434ce0f1d3820da
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Since we only support XCode 3 and later, then all of the legacy code can
be safely removed.
Change-Id: I9be8555aaa62c716b2277c2b97f41aa02d27ef13
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Properly use from/toLocal8Bit when referring to user data, even file
names.
Change-Id: I8fc7afa2ea570f8b1b1eecf354f01d6dfe0883cb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
219a688ac1 added the version extension
which only occurs on the DLL import library.
Change-Id: Ie913adf039d7f3a9aadf43f4af014289a8aeacbe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Hib Eris <hib@hiberis.nl>
When creating the temporary project object,
Option::output_dir must be adjusted temporarily.
Task-number: QTBUG-22788
Change-Id: Ibf8897a46b63f48b9e33d7e2168b09e559cecec7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Since Windows Vista the resource language must be included to
make the version information visible in Windows Explorer.
Two new variables have been introduced:
RC_LANG (default: 1033) - resource language
RC_CODEPAGE (default: 1200) - resource codepage
Task-number: QTBUG-23218
Change-Id: I29e102d19501e3b7a43d5096fc4806bc38a4d846
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
If VC++ 2010 Express and VC# 2010 Express are installed, then the
installation path is written in two places into the registry.
We're now filtering detected installations with the same installation
path.
Task-number: QTBUG-24956
Change-Id: I401430e7aa81d96c523d8172d2a2e9d40ebdb3ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QStringBuilder will be enabled by default so qmake should build with it.
qstringbuiler.cpp has to be compiled in just for the convertFromAscii
(The alternative was to build with QT_NO_CAST_FROM_ASCII, but that would
be too much work)
Change-Id: I1fbeed7ed8a9d3bc38ef591a687c50644980e2fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this is a complete bastardization of the concept and breaks the (unused)
debugging feature to create proper unix makefiles under windows, but
apparently it permits cross-compiling unix targets under windows.
Change-Id: I4ee95a20e7d6a6b2063ec7aa22f52c1a97d78a77
Reviewed-by: Oliver Wolff <oliver.wolff@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this was a somewhat magic support for sysroots, automatically rewriting
a number of path-holding variables. this was (as usual) completely
undocumented, extremely fragile, and we are coming up with something
better now anyway.
Change-Id: I045910f532cb3efc839ea81c7a48f8db695e4092
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
there is totally no reason to call it unless the project is actually
used for makefile generation, and the excessive calls actually mess up
things.
Change-Id: Idb7912a5404f6054010d2f29cce820a167de4f6f
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
instead of initializing base_vars with the original's vars, initialize
vars itself. this has two consequences:
- there is no need to call read(0) to initialize vars
- one cannot usefully call the complex read() anymore, as that would
re-initialize vars from base_vars
this is much closer to an actual copy than the previous "seeding with
existing project".
Change-Id: Ib007bc5b779aedb680a27329aa578f7c604a4308
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
merge them into before_user_vars. they are evaluated right after another
anyway.
Change-Id: I11859284b363fee01233f6e20989444fef711d0d
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
don't inject the build pass specific variables into the project even
before evaluating the .spec file and the .qmake.cache. they are not
supposed to base configuration on that - feature files should do that
later.
the immediate advantage of this is that base_vars is never manipulated
upfront any more, which allows for cleaner setup paths. also, we can do
more caching of the spec+cache contents.
Change-Id: I19d7f8bec1fb7c3b54121e26794340b287055ebf
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
instead of messing with the Option singleton, add a way to inject
extra config values into QMakeProject.
Change-Id: Ia347dcc38af2c72913e30ebf5c2b4044f93b4f5f
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
instead of being a variable added to the makespec (via qconfig.pri),
QT_SYSROOT is now a property.
the QT_INSTALL_... properties are now automatically prefixed with the
sysroot; the raw values are available as QT_RAW_INSTALL_... - this is
expected to cause the least migration effort for existing projects.
-hostprefix and the new -hostbindir & -hostdatadir now feed the new
QT_HOST_... properties.
adapted the qmake feature files and the qtbase build system accordingly.
Change-Id: Iaa9b65bc10d9fe9c4988d620c70a8ce72177f8d4
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
This adds support for XCode 4 into qmake and also indirectly fixes a
couple of problems that are relevant for XCode 3.2 too
Task-number: QTBUG-17247
Change-Id: I722470ad1854bd740cbbd28ff4956057a0e1906b
Reviewed-by: David Forstenlechner <dforsten@gmail.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
(cherry picked from commit b5871311457ca97816c0abbb8b935570bbfb657c)
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This implements replacements for win32 makefile generators similar
to the replacement functionality in unix makefile generators.
To enable Makefile code generation for replacements in win32 makefile
generators, you must set QMAKE_STREAM_EDITOR to e.g. sed.
When building for win32, sed is normally only available in the
mingw/msys build environment and when cross compiling on unix.
In these cases QMAKE_STREAM_EDITOR is set to sed in qmake.conf.
For other win32 build environments QMAKE_STREAM_EDITOR is not set
in qmake.conf and the replacements Makefile code is not generated.
Change-Id: Ie5de5d517eafaeaa2544f1e972aec3fe11d0a6f1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The QByteArray::operator const {char,void}*() implicit
conversions are a source of subtle bugs, so they right-
fully can be disabled with QT_NO_CAST_FROM_BYTEARRAY.
const char *d = qstring.toLatin1(); // implicit conversion
while ( d ) // oops: d points to freed memory
// ...
But almost no-one ever enabled this macros in the wild
and many were bitten by these implicit conversions, so
this patch deprecates them.
I would have liked to remove them completely, but there
are just too many occurrences even in Qt itself to hope
to find all conditionally-compiled code that uses these.
Also fixes all code that needs to compile under
QT_NO_DEPRECATED (in qmake/, src/tools/).
I984706452db7d0841620a0f64e179906123f3849 separately
deals with the bulk of changes in src/ and examples/.
Depends on I5ea1ad3c96d9e64167be53c0c418c7b7dba51f68.
Change-Id: I8d47e6c293c80f61c6288c9f8d42fda41afe2267
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The libName that is used in pkgConfig files should include the
TARGET_VERSION_EXT.
This is needed because in Win32MakefileGenerator::fixTargetExt(),
the TARGET_VERSION_EXT is added to the library name.
In Win32MakefileGenerator::processVars(), if TARGET_VERSION_EXT is empty,
it is set to VER_MAJ.
On platforms != Windows, TARGET_VERSION_EXT does not seem to be used.
We probably got away with this so far because pkgconfig files generation
for win32 was just added in 4.8 and nobody uses them yet, and because on
platforms != windows the TARGET_VERSION_EXT is not used.
Change-Id: I56f239e389f0ef926030e4c2376cadd92c4f673c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
It was the result of miscoordination between Andreas Holzammer and me,
duplicating the functional change of commit
ea2c9f764f.
This reverts commit 8b7a9b4898.
Change-Id: I9a47746c1c12ca00b2dc5c5d50e99f9bf990e3f7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Disable optimization for getProjectUUID() as it triggers
ASSERT: "&other != this" at qstring.h:720 with -O2.
Change-Id: I51b31d4318ba9be187c186623099171d8f48235b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qmake-generated Makefiles since 4.6 (according to bug report) contain
recursive qmake invocations with absolute paths to .pro files, where the
absolute paths are not escaped.
Task-number: QTBUG-11776
Change-Id: I49772c7d9147efea3bb7b9623c61d92aa0bb6857
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When installing extra binaries the paths where not being escaped,
causing stripping and deleting to fail when dealing with filenames
that contained one or more spaces.
Change-Id: Iba4517b1110f6af30f7e2662cb86024a8b7b81f7
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Lincoln Ramsay <lincoln.ramsay@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this should make the evaluator quite a lot faster. the total win for
qtbase/src is only 6%, though.
i made some effort to avoid that output files get randomized. however, i
didn't bother to keep debug output sorted.
Change-Id: Id9cef4674c0153c11ebbb65cb63bf8c229eb56e3
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
For the debug configuration the optimization should be turned off.
Task-number: QTBUG-23421
Change-Id: Ib63e0c51f9ab31180ff8ee01a1f6c57ab77e390e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Setting QMAKE_CFLAGS+=/MP in a project file did not work for VS 2010.
Task-number: QTBUG-23490
Change-Id: I39c349bf8dc2a4add2f32a430a245a20cc54147e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Silence MSVC warnings about forward-declarations as class
in the metatype system.
Change-Id: I676662e5919585e98c87413fd8360d6f41f73631
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
This solves the problem of two source files in the same project
having the same name, which ends up with colliding object files.
It also solves issues with moving files around in the source tree
when the GNUmake option is used together with gcc_MD_depends,
where the dependency file would end up with a dependency to the
old source location.
We already have object_with_source option, but that does not play
nicely with shadow-builds. The new option tries to keep the same
hirarcy in the output dir (while still respecting OBJECTS_DIR),
as the sources. Any source with a path outside of the root project
directory (absolute or relative, ../../foo.cpp), will be put inside
the objects directory with the full path appended.
Change-Id: I0c96291974f4801f4c55a26485d512b15c144c00
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Extra compilers may define a depend_command that's used to generate
dependencies for each input. When GNUmake was enabled we failed to
run this command, which was affecting resource files, as resource
dependencies are handled by an extra compiler defined in resources.prf.
The result was that changes to resources included in a resources-file
did not trigger a re-run of qrc and subsequent recompile of the
resource object file.
We must always run these custom dependency commands, even when GNUmake
(and the extended gcc_MD_depends option) is enabled, as GCC is only able
to handle regular #include-type dependencies. Hence, the check for the
'include_deps' flag was removed from doDepends(), and the check for
GNUmake was moved to the one place where it still made sense -- when
deciding whether or not to do recursive dependency checking.
Change-Id: I5ddb75c873120c90f798808efc52e81500786301
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
And enable this configuration option for the resource compiler. This
results in a re-run of qmake whenever you touch a qrc file, which is
needed to keep the dependencies up to date. Otherwise you might end
up in the situation where you add a file to a qrc, edit the file some
time later, but a rebuild does not regenerate a cpp file and compile
that, so the final binary is stale.
Technically this dependency problem is present for all source files,
and qrc files are no different than any cpp file that you add a new
header #include to, or adding a Q_OBJECT macro to a header. To pick
up these changes we have to re-run qmake, so that qmake can run its
internal dependency checking, and any extra compiler dependency
commands.
The reason we're making this change for rcc files it that conceptually
people treat them as a "project" files, and expect them to behave similarly
to .pro or .pri files, in that editing the file will invalidate the
makefile. In practice this is often what happens when adding new
headers, as you touch the project file when changing the HEADERS
variable.
Task-number: QTBUG-13334
Change-Id: If69149678e7fba6d812d31dcc17877427f9a6122
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
qmake generates .gpj project files for INTEGRITY.
Calls to moc on headers or code that do not produce actual output cause
a Note to be generated. This is considered as an error during build by
the Green Hills gbuild build tool.
-nn can be added to not generate that note when no output is generated.
This was already done for headers in util/integrity/qt.bod, but it was
not there yet for .cpp files.
Merge-request: 2693
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
(cherry picked from commit 480b2f4c79160afaac7934936d3ae6ea382ae2bb)
Change-Id: I480b2f4c79160afaac7934936d3ae6ea382ae2bb
Many enumerator values were not handled in msbuild_objectmodel.cpp. For
each unhandled value, add a case statement that simply breaks.
Change-Id: I018fc5e641200568c88ccc6acb3f5b6ee6b3fd6f
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
It's nicer to do:
SUBDIRS += foo
foo.CONFIG = no_default_target no_default_install
then to omit foo from SUBDIRS because a Makefile is still produced
but "make" and "make install" don't descend automatically.
The vcproj generator doesn't know about this. This patch gets it to
check for no_default_target and then it simply ignores the directory.
Change-Id: I127bea79143c101612afb0e9c6603d3b065c7c56
Reviewed-by: Oliver Wolff <oliver.wolff@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Using CONFIG+=GNUmake will enable dependency tracking using included
dependency files, but will use an implicit makefile rule to generate
each .d file.
We now support an additional CONFIG option, gcc_MD_depends, that
instead passes the -MD flag to a GCC (compatible) compiler. This
will generate a .d file as a side-effect of the normal compile
step.
Change-Id: Ib6ce1d93e7f07e316a345bf12aa6f2b4e9a6415d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Sometimes you will include "moc_foo.cpp" from a a cpp file, not to tell
qmake to run moc on it (that's handled by having foo.h in HEADERS), but
so that the moc'ed sources are compiled as part of foo.cpp instead of a
separate compilation unit, or if the moc'ed sources need defintions from
the cpp file.
The dependency logic for CONFIG+=GNUmake failed to take this case into
account, resulting in failures to find files when generating dependency
information for those files.
Change-Id: Iac00424e2d196b518b1ef576d7567335b8ff24f0
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Previously we were generating include lines based on the relative path of
the source file, which resulted in the .d files being placed in the source
dir as well. We now expect the .d files to live in the output dir, but keep
the dependency from the .d file to the original source file.
Before:
.deps/%.d: %.cpp
-include .deps/../../src/foo.d
After:
.deps/%.d: ../../src/%.cpp
-include .deps/foo.d
Change-Id: I749adeb671cf8424f0849521c5bb1489eb3e76d5
Reviewed-on: http://codereview.qt-project.org/6455
Sanity-Review: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Recursive QMAKE_EXTRA_TARGETS were omitting the `-f' option to make.
This would break in the case where the correct makefile was not named
`Makefile'. The included autotest demonstrates the problem.
Note that this was fixed for normal targets back in 2005
by faac7bd178654fd67a6f3f9cf4f6f2605071448d (p4 202370), but was not
fixed for extra targets.
Reviewed-by: ossi
(cherry picked from commit 96a3bf7a8bbc1e5361e16cbeeceb4be674b88c30)
The template type "aux" is intended for projects that do not require building anything, but may need to install stuff (e.g. applications with QML entry point).
Reviewed-by: Joerg Bornemann
(cherry picked from commit 56443421cb5e537e60abd7ced42c9ebf587683fe)
This is the beginning of revision history for this module. If you
want to look at revision history older than this, please refer to the
Qt Git wiki for how to use Git history grafting. At the time of
writing, this wiki is located here:
http://qt.gitorious.org/qt/pages/GitIntroductionWithQt
If you have already performed the grafting and you don't see any
history beyond this commit, try running "git log" with the "--follow"
argument.
Branched from the monolithic repo, Qt master branch, at commit
896db169ea224deb96c59ce8af800d019de63f12
