The various variants duplicated some rather complex code around
varying setup in the middle. Rework in terms of a macro that defines
main() and takes the setup code as a parameter. That setup code also
had some common structure, so package that in a setup macro that takes
the class to be used.
Reworked various testlib selftests that were using QTEST_MAIN_IMPL();
change to use the new QTEST_MAIN_WRAPPER() and TEST_MAIN_SETUP().
These might be better dealt with by supporting a second form of the
initMain() test-setup function in the test classes, that takes
references for argc and argv, to let a test massage its command-line
options.
Change-Id: I7fb16b38d51c80ba2f5c9c82f3b7a37ffc636795
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When deciding whether to run benchlibcallbrind, the code only tested
_i386; it now tests __x86_64 as well, to match a recent change in the
test itself. As there, reverse the test to reduce negations, flipping
the stanzas it selects between. Also tidy up the code that tests for
valgrind being present - and actually return true, to skip the test,
when it claims to be skipping the test.
Updated test results, now that the test can actually be run and
produce sensible output. Added an _2.txt that matches the results
presently seen in Coin on RHEL 8.4 (despite the fact that a local
build on such a VM produces output matching the _1.txt results).
Change-Id: Ibce09dca06a1eeb73e90fb1345834998683df9d8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It unconditionally added -callgrind to its own command-line options,
but the way testlib handles this argument is, in QTest::qRun(), to
re-run the program under the control of valgrind --tool=callgrind,
removing the -callgrind command-line option from the test and adding
-callgrindchild to its command-line options. So we shouldn't re-add
the -callgrind option in the resulting recursive call.
The test now runs quickly, producing sensible output, where previously
it took a very long time. Revised the drivers to reflect this
speed-up, but continue skipping the non-.txt formats to save the need
for variant-output files for many formats. To match that, removed the
unused non-.txt results files.
Change-Id: Iaa99c1b5964d50bccfc6076a21896791b6bbf289
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The given reason for needing to define it was that there was no way to
test whether <valgrind/valgrind.h> is available to #include; but we
now require C++17 hence __has_include(). However, moc doesn't seem to
grok that, so move the test's #if-ery inside the test, since otherwise
it gets omitted because the test's metatype doesn't know it's there.
Change-Id: I75a100787b98a52fad4cfb0b047318a115c998e2
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Its twoHundredMillionInstructions() test has #if-ery to limit it to
gcc and x86; however, it was testing only __i386 for the x86 part,
where gcc defines __x86_64 instead on modern 64-bit systems. In the
process, invert the condition and the branches it controls - positive
tests are easier to comprehend.
Change-Id: I8e906c606c48aa5034e02e3ed5d042fbb1f2ecbc
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Extract Method QTest::qCaught() to take the string handling out of the
header. This should help a bit in speeding up compilation of large
unit test files (provided they use QVERIFY_THROWS_EXCEPTION), although
I have no data to support that.
Since we changed the error message, update the selftest accordingly.
Change-Id: Id4a3c8c34d5df8d0c7a861106d269097f4a6de5c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This solves the long-standing problem of not being able to easily
fail a test when a certain warning is output.
[ChangeLog][QtTest] Added QTest::failOnWarning. When called in a test
function, any warning that matches the given pattern will cause a test
failure. The test will continue execution when a failure is added.
All patterns are cleared at the end of each test function.
Fixes: QTBUG-70029
Change-Id: I5763f8d4acf1cee8178be43a503619fbfb0f4f36
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use variable args macros to swallow any extra commas in the
expression. To use this, the type of the exception has to be first.
Use Eddy's suggestion for a new name to avoid breaking the old macro.
[ChangeLog][QtTest] Added QVERIFY_THROWS_EXCEPTION, replacing
QVERIFY_EXCEPTION_THROWN, which has therefore been deprecated.
Change-Id: I16825c35bae0631c5fad5a9a3ace4d6edc067f83
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Swallowing unknown exceptions is dangerous business, as the exception
might be a pthread cancellation token, the swallowing of which would
terminate the program.
Instead of returning from the catch-all-clause, therefore, re-throw
the unknown exception.
Fix tst_verifyexceptionthrown failure cases that use
non-std::exception-derived true negative exceptions to not let the
exception escape from the test function.
As a drive-by, pretty up the macro's docs.
[ChangeLog][QtTest][QVERIFY_EXCEPTION_THROWN] Now re-throws unknown
exceptions (= not derived from std::exception) (was: swallowed them
and returned from the test function), in order to play nice with
pthread cancellation.
Pick-to: 6.2 5.15
Change-Id: Ic036d4a9ed4b7683fa67e27af8bcbae0eefdd0da
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We have some special handling in qt_windows.h,
use it instead of the original windows.h
Change-Id: I12fa45b09d3f2aad355573dce45861d7d28e1d77
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The --skip-benchlib option was misnamed: there are several benchlib
tests, of which it only skipped the callgrind one. As there is no
other test involving callgrind, rename to --skip-callgrind.
Change-Id: I0179fd35dd79c525f79e4a28a626e964323409bf
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This ensures that a command such as
$ ninja tst_qlocale && ninja tst_qlocale_check
will automagically build the syslocaleapp program that the test runs
from a subtest. Similar for testlib's selftests and tst_QProcess.
As a drive-by, pruned some legacy comments from when CMakeLists.txt
files were generated from .pro files.
Change-Id: I67691a8175aaef124d4104cf1898193993408bdf
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
- Exclude Green Hills compiler from Catch2's POSIX signal handling.
GHS, at least on INTEGRITY, doesn't support full POSIX signals.
Task-number: QTBUG-96176
Pick-to: 6.2 6.2.0
Change-Id: Ifec06dca43ed766cb7335e40fc357d0d7bc463a6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Minor clean-up.
Split two long lines and added braces, called for by Qt coding style.
Turned some QDebug("this line should never be reached...") into QFAIL();
that should make the effor a bit more prominent if it ever happens.
Likewise for a qDebug() << "ERROR: ..." for code not meant to run.
Change-Id: I1d34fe202f269eb3ad8f58feaabed809e4fec99c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
This mimics the effects of test-code delegating checks to other
functions, which can lead to repeated failures. The failing test
should only contribute one to the total of failed tsts. Drive-by:
correct an existing test's reporting of its own name.
Task-number: QTBUG-95661
Change-Id: I370fd2aee378d9fdd35826f0d11677483c60423d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Include counting of test types, to catch two more cases where totals
don't add up.
Task-number: QTBUG-95661
Change-Id: I9fe5424bc6652c61a065bf2889333e2ed9437c81
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Count how many we expect to pass, fail and be skipped, so we can
report that for comparison with the actual totals line: this reveals
some double-counting, marked with a FIXME.
Task-number: QTBUG-95661
Change-Id: I8b0f13ded5202ed476d8abfee70ed60f9e639bf9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This reverts commit 904617dfb8 and makes
clear to future readers why that wouldn't be a sensible change.
Update the test's data, eliminating a case of duplicate counting that
was caused by the reverted commit.
Task-number: QTBUG-95661
Pick-to: 5.12 5.15 6.1 6.2
Change-Id: Ice6d3ab06ca171e0d6eb0fac757f1ab774e229f0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Test both Abort and Continue cases. Test more with successive marked
as expected failure. Test cases with a QSKIP after the marked check.
Unify data functions where practical.
Change-Id: I2eade5e4dd0907d23e37137ce3d93cd5ca79f802
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The separation between <system-out> and <system-err> is sufficient, and
we can't expect consumers to interpret our custom comment format.
The type of the text node has been renamed to more accurately identify
its purpose.
Pick-to: 6.2
Change-Id: I63c8ff17529fc087e1b695698350a6711eb5e68d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It's used to handle qCritical() messages, and corresponds to QtMsgType's
QtCriticalMsg, so change its name to reflect what it really is.
In the process, reclassify the -maxwarnings overflow message as a warning,
rather than a critical message.
Pick-to: 6.2
Change-Id: I87626117a547ae4498d5dc352b93bd6db8bfb332
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The original Ant JUnit reporter only writes <system-err> and <system-out>
to the <testsuite>, but more modern reporters such as Maven Surefire
scopes output to each individual <testcase>.
This is also handled by both the Jenkins JUnit and xUnit plugins, e.g.:
https://github.com/jenkinsci/junit-plugin/commit/145eb5c98
Pick-to: 6.2
Change-Id: I20c87276004a4e0910fc18e05e6ffa0f5e5a7b7c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The -silent option to tests is only supported with the plain text
logger, so we don't need to maintain expectation files for the
others.
Pick-to: 6.2
Change-Id: I0f42bfe90d82b7ce04f550c747d4a80e99621e74
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Test errors represents unanticipated problems, e.g., an unhandled
exception, or a problem with the implementation of the test.
Pick-to: 6.2
Change-Id: I87219e7ffdea56862278f005de44526ad97545f0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We don't produce <failure> elements for them, so we shouldn't include
them in the total count of failures.
In the future we might produce <skipped> elements instead, but for now
remove the incorrect increment.
Pick-to: 6.2
Change-Id: Ia89a5cdaf79f6aa2f92be53180112c40ad6da2c6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The data itself is not indented, as consumers may read it as verbatim
data.
Pick-to: 6.2
Change-Id: Ia934616cea273feadc3a45d7c74726d4f804f0dc
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
33d7f76f0e attempted to exercise more
of the blacklisting code, but in doing so didn't account for the
fact that the features it added didn't actually work.
Adding a global blacklisting of * will result in blacklisting
all tests, regardless of any inverse conditions "!*" later on,
such as for the 'pass' test. This would have been evident by
looking at the expectation files, which still showed the test
as a BPASS.
The broken feature should be fixed, but in the meantime let's
clean up the test so it doesn't misrepresent reality.
At the same time we also remove the messages() tests, which was
copied straight out of tst_silent, but doesn't serve any purpose
for the blacklist selftest.
Pick-to: 6.2
Change-Id: I20e4693300aad5e9ff5f17ad22e3dfcb5c49fd0e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The Apache Ant and Surefire Maven specs document a <skipped> element that
can be used to signify skipped test, with a corresponding total skipped
test attribute on the <testsuite>.
The element includes an optional message attribute, documented in the
Surefire spec, and in the Ant source code, but not yet documented in
the reverse-engineered Ant spec:
https://github.com/windyroad/JUnit-Schema/pull/11
Pick-to: 6.2
Task-number: QTBUG-95424
Change-Id: Ib6417a41b9c328836f4017e6ebf7f7e9cd91288d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The errors attribute on the <testsuite> element represents the number of
<error> elements, but we do not produce any at the moment.
Pick-to: 6.2
Task-number: QTBUG-95424
Change-Id: I7196d622a9a6bbb7e79ed2c2886984d539abb1da
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The JUnit test framework did not initially have any XML reporting
facilities built in. Instead, the XML report was generated by the
Apache Ant JUnit task:
https://github.com/apache/ant/search?q=filename%3AXMLJUnitResultFormatter.java
Many users interacted with these reports via the Jenkins JUnit plugin,
which provided graphical visualization of the test results:
https://plugins.jenkins.io/junit/
Due to the lack of an official XML schema for the Apache Ant JUnit
report there was some confusion about what the actual format was.
People started documenting the de-facto format, both as produced
by Ant, and as consumed by Jenkins:
https://github.com/windyroad/JUnit-Schema/blob/master/JUnit.xsdhttps://github.com/junit-team/junit5/search?q=filename%3Ajenkins-junit.xsd
The XML produced by the Qt Test JUnit reporter was far from these
schemas, causing issues when importing results into tools such
as Jenkins, Allure2, or Test Center.
The following changes have been made to improve conformance:
- The 'timestamp' attribute on <testsuite> is is now in ISO
8601 local time, without any time zone specified
- The 'hostname' attribute on <testsuite> is now included
- The 'classname' attribute on <testcase> is now included
- The non-standard 'result' attribute on <testcase> has
been removed
- The non-standard 'result' attribute on <failure> has
been renamed to 'type'
- The <system-out> element on <testsuite> is always included,
even when empty
- The non-standard 'tag' attribute on <failure> has been
removed. Data-driven tests are now represented as individual
<testcase> elements, e.g.:
<testcase name="someTest(someData X)" ...>
<testcase name="someTest(someData Y)" ...>
<testcase name="someTest(someData Z)" ...>
The resulting XML validates against both the de-facto Apache Ant
'JUnit 4' schema and the Jenkins JUnit plugin schema.
Task-number: QTBUG-95424
Change-Id: I6fc9abedbfb319f2545b99b37d059b18c16776ff
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
- Use the right name for the attribute (AI_Message),
rather than fixing it up in QTestJUnitStreamer.
- Don't pretend that we're adding line and file information,
only to discard it in QTestJUnitStreamer.
- Don't pretend to add benchmark information,
only to discard it in QTestJUnitStreamer.
Pick-to: 6.2
Change-Id: Ib6eadc12300157216fe9c6e8bcfebd7eb8a3ea68
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We try our best to pass on the file location of a failure, including for
fatal errors, but the reporting or logging machinery should not assume
there is one.
By passing on nullptr for the file location we allow the logging backends
to decide how to handle the situation, e.g. by not emitting extra fields
for failure location.
This effectively reverts c25687fa0b,
in favor of relying on the backends to cope with null filename,
which they already did.
As qFatal uses QMessageLogger, which by default disables file/line
information in release builds, we need to explicitly enable this in
our self-tests, to get uniform test results. Similarly, we disable
file/line info from testlib itself, as reporting Qt internal file
and line information for user diagnostics is less useful. The odd
one out there is qtestdata.cpp, which still ends up in test output
due to using QTEST_ASSERT instead of qFatal for its diagnostics.
Cleaning up that, and unifying how we report testlib issues to the
user, is left for another day.
Pick-to: 6.2
Change-Id: Ib9451b8eed86fe3ade4a4dcaf0037e1a3450321c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QtTest best practices documentations recommends using output
mechanisms such as qDebug() and qWarning() for diagnostic messages,
and this is also what most of our own tests do.
The QWARN() macro and corresponding internal QTest::qWarn() function
was added when QtTest was first implemented, but was likely meant as
an internal implementation detail, like its cousin QTestLog::info(),
which does not have any corresponding macro.
This theory is backed by our own QtTest self-test (tst_silent)
describing the output from QWARN() as "an internal testlib warning".
The only difference between QWARN() and qWarning(), besides the much
richer feature set of the latter, is that qWarning() will not pass
on file and line number information in release mode, but QWARN() will.
This is an acceptable loss of functionality, considering that the user
can override this behavior by defining QT_MESSAGELOGCONTEXT.
[ChangeLog][QtTest] QWARN() has been deprecated in favor of qWarning()
Pick-to: 6.2
Change-Id: I5a2431ce48c47392244560dd520953b9fc735c85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For historical reasons a few of the subtests are skipped when
running with anything but the plain text logger to stdout.
To ensure we have as broad test coverage as possible for the
expected output of the various loggers we run these tests in
stdout-mode.
Pick-to: 6.2
Change-Id: I856905d1543afe89710533657a55bd599c0305fd
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The JUnit reporter was initially named xunit, but the naming was inaccurate
and the reporter was renamed in 27db9e458c.
The corresponding test has now been renamed as well, and as an added bonus
we only run it for that reporter.
Pick-to: 6.2
Change-Id: I59cb7d949514cdf46a0199a53a7a3e39f833207c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
In commit 9bad096c09 I gave
qFuzzyIsNull(qfloat16) a more forgiving threshold, consistent with
qFloatCompare(qfloat16, qfloat16)'s fractional threshold. The selftest
failed to catch two of the tests failing, so fix one of them to use
different values, and remove one.
Updated test expection for txt and deleted for other formats, as
they're skipped (in tst_selftests.cpp) for this test. Refined the
generator script to know about this test only being tested for txt.
Pick-to: 6.2
Change-Id: I109547cf92178bb9f5ff0b06e0b3bb40c881b41b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The MinGW resource compiler fails to handle compile definitions
with multiple values.
When the resource file is compiled as part of the main target rather
than a separate object library, the resource generation rule will
inherit all the compile definitions from the main target.
For the case of tst_selftests this causes errors like
gcc: error: badxml\: No such file or directory
gcc: error: benchlibcallgrind\: No such file or directory
gcc: error: benchlibcounting\: No such file or directory
gcc: error: benchlibeventcounter\: No such file or directory
gcc: error: benchliboptions\: No such file or directory
Limit the compile definition to the C++ language only, so the multiple
values are not passed to the resource compiler.
Pick-to: 6.2
Change-Id: Ie53666839272556323b50d79c090f0dc71745d11
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Says GCC:
In function ‘char* QTest::toString(QPair<T1, T2>&) [with T1 = QWidget*; T2 = QEvent::Type]’,
warning: ‘%s’ directive argument is null [-Wformat-overflow=]
Fix by re-using formatString(), once introduced for std::tuple.
As a side-effect, this gets rid of the funny double-quotes around the
output.
Change-Id: I2dd5f10fa2b3a392370bf487c1b7e98f3d190978
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Previously, it went direct to QTestResults::addFailure() without going
via the checking for expected failure. Add QTestResults::fail() to
take care of this checking, as for verify() and compare().
Tidied up the code implementing expected failure and QFAIL(), while I
was about it. Adjusted an existing test to verify that expecting a
QFAIL() works, by using QFAIL() instead of QVERIFY(false).
Remove the QVERIFY(false) whose comment brought this to my attention.
[ChangeLog][QtTestLib][QFAIL] QEXPECT_FAIL() now correctly anticipates
a subsequent QFAIL(). Previously QFAIL() counted as a fail regardless.
Change-Id: Icc28cf70e5ff3006363791ea03aa01f2f591eb71
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Output object name and class in QCOMPARE(). This should help
to debug flaky QWidget tests that for example check on focusWidget().
[ChangeLog][QtTestLib] QCOMPARE() now reports QObject * values by class and objectName().
Task-number: QTBUG-64446
Change-Id: Ife04e89bba04fc78d077c8f0f07af17a17c9cf8c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Cast size_t return from std::vector explicitly to int to silence compiler
warnings.
Change-Id: I0c425b3cec7feec0712e1173ab7e60b28695d6d7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When inserting rows to a branch with no columns
the tester should not complain about indexes being invalid
Pick-to: 6.1 6.0 5.15
Change-Id: I466f4e5140b10f6dcf65a71f109c2d3be7336507
Reviewed-by: David Faure <david.faure@kdab.com>
When rows are removed from a model with no columns,
the test should not report a problem if indexes are invalid
Fixes: QTBUG-92886
Pick-to: 6.1 6.0 5.15
Change-Id: I7a042dfdb2575f87208a00cbed13db3869807f84
Reviewed-by: David Faure <david.faure@kdab.com>
We are still using Catch2 2.11.3 which is not adapted to Apple
silicon yet. This patch backports the required change
from Catch v3.0.0-preview.3.
Change-Id: Ifa14a1fdd6cd1f661c94a0a78648cb01bd9699c1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
