This fixes the blocks and memory consumption reports, the whitespace issues
and makes the code a bit cleaner.
Since I'm the only one who does change this code, such a no-op commit
could not hurt anyone or even git blame ;)
Change-Id: Ib069f925a3791c82e16c368c8392bcffbfd68c53
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Instead of expanding the scripts table with script values for the code points
>= 0x10000, it has been merged with the properties table in order to
increase perfomance of the script itemization code (not affected yet).
(Stats: the properties table grew up in 97428-89800 = 7628 bytes;
the old scripts table was of size 7680 bytes)
The outdated ScriptsInitial.txt and ScriptsCorrections.txt file has been removed
(they were just empty, the "corrigendum" script corrections should be applied
to Scripts.txt directly, *no customization allowed*!).
More script testcases has been added - at least one per supported script.
Task-number: QTBUG-6530
Change-Id: I40a9e76f681e2dd552fd4c61af0808d043962e79
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
+ QChar::LastValidCodePoint enum value that supercede the UNICODE_LAST_CODEPOINT macro
replace uses of hardcoded values with the new API; remove leftovers
Change-Id: I1395c9840b85fcb6b08e241b131794a98773c952
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
since the entire range of a valid unicode code points is in use, QHash
is suboptimal and could be replaced with QList;
taking the value by ref and not inserting it back to the map + not calculating
the default value over and over gains us up to 60% performance boost!
Change-Id: I48c54a8e88472cf76c79c0aac44e65eeefa44861
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
in order to reduce code duplication and prepare the ground for upcoming changes
Change-Id: I980244149f65384c9484bbec4682de8b7b848b08
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
> http://www.unicode.org/versions/Unicode5.2.0/
D. Character Additions:
There are three new characters in the newly-encoded Kaithi script that will
require changes in implementations which make hard-coded assumptions about
composition during normalization. Most new characters added to the standard
with decompositions cannot be generated by the operations toNFC() or toNFKC),
but these three can. Implementers should check their code carefully
to ensure that it handles these three characters correctly.
U+1109A KAITHI LETTER DDDHA
U+1109C KAITHI LETTER RHA
U+110AB KAITHI LETTER VA
UCD 6.1 adds two more of them:
U+1112E CHAKMA VOWEL SIGN O
U+1112F CHAKMA VOWEL SIGN AU
Change-Id: I781a26848078d8b83a182b0fd4e681be2a6d9a27
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: Ib1eaf42679ab5db4005192c3d00ba79e43edfcca
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
better memory usage report;
an additional asserts with conditions the implementation is depends on;
a namespace for the internal static data;
styling fixes
Change-Id: Id4048ff6104c56b5f590f9ac6fbf7c0bce79ec47
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
there are two such codepoints were added in the Unicode 5.1:
U+1D79 LATIN SMALL LETTER INSULAR G
U+A77D LATIN CAPITAL LETTER INSULAR G
two more of them were added in the Unicode 6.0:
U+0265 LATIN SMALL LETTER TURNED H
U+A78D LATIN CAPITAL LETTER TURNED H
and two more were added in the Unicode 6.1:
U+0266 LATIN SMALL LETTER H WITH HOOK
U+A7AA LATIN CAPITAL LETTER H WITH HOOK
we map them like special cases with length == 1
(note: all are in BMP which is checked explicitly in the generator)
Change-Id: I8a34164eb3ee2e575b7799cc12d4b96ad5bcd9c6
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
In Qt4 QLocalePrivate is a struct returned by a d() method. This will be
unsuitable for the planned change to use ICU and may cause BIC issues.
This change makes QLocalePrivate a class and creates a new struct
QLocaleData to hold the data index. Further clean-ups are possible
but are left for later.
Change-Id: Ie316a07790f74674a3b520b735dff72695cc4060
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
http://unicode.org/versions/corrigendum6.html:
> in Unicode 5.0, the list of characters with the Bidi_Mirrored property
> was made consistent for brackets and quotation marks, in preparation for
> new constraints on bidi mirroring. However, after publication of
> Unicode 5.0.0 it was discovered that this change adversely affected
> several quotation mark characters in deployed data.
Task-number: QTBUG-25169
Change-Id: Id49caf401af2d5a1e6dbcc32b2f350aa20b7f901
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
let's don't hardcode the latests affected version value and simply use
the one parsed from NormalizationCorrections.txt
Change-Id: I37021e8238d77deada4c5ba7a2d160c87186b9dd
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The implementation of the various qHash overloads offered by
Qt can change at any time for any reason
(speed, quality, security, ...).
Therefore, relying on the fact that qHash will always give
an identical result across Qt versions (... across different
processes, etc.), given identical input, is wrong.
Note that this also implies that one cannot rely on QHash
having a stable ordering (even without the random qHash seed).
For such use cases, one must use f.i. a private hash function
that will never change outside his own control.
This patch adds a private hash function for QStrings,
which is identical to the Qt(4) qHash(QString) implementation.
A couple of spots in Qt where the results of a qHash call were
actually saved on disk are ported to use the new function,
and a bit of documentation is added to QHash docs.
Change-Id: Ia3731ea26ac68649b535b95e9f36fbec3df693c8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Month Names and Standalone Month Names are stored separately, but for
majority of locales the names are the same and so storage is duplicated.
By storing both sets of names in the same array 50KB is saved in
libQtCore.so on Linux.
Depends on change Ic84bbc82 in branch api_review for CLDR 1.9.1
Change-Id: I83224ebc2180ee6de69797fa50d38348acc94107
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
remove "header" and assignmets which are defaults or bogus,
reorder some assignments.
Change-Id: I67403872168c890ca3b696753ceb01c605d19be7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
from now, QUnicodeTables::specialCaseMap[] starts with a placeholder; so,
if somethingCaseSpecial is true, then somethingCaseDiff is always greater than 0
Change-Id: Ibb1870512836eee71b1521564c0745096c05b2f9
Merge-request: 70
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Olivier
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The strange indentation has made maintenance of license headers
difficult on several occasions.
Change-Id: Ib29a7e5275e2c7a2c13a3f32fd2479f34d3353ca
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
After accessibility API changes. Also make the windows
a bit smaller since the primary user is on a laptop
now.
Change-Id: I53a86cbe85adbbb27401dbf6c3c389629e295b4d
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
childAt used to return an integer.
Return an interface instead.
Not requiring a direct child to be returned allows optimizing
by bypassing iterating through the hierarchy of accessibles.
For QtQuick this is the only sensible way of implementing this.
The bridges are still responsible for finding the top-most element.
The default implementation in QAccessibleObject is sufficient
to return direct children. The implementation in
QAccessibleApplication is therfore no longer needed.
Change-Id: Id7100dd5bcc3a98de516a7f4a12eaaa41cb46d26
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
This reverts commit f73e42369a5b4ba43cb8dc8cbcc6232e4375306c
This is a work in progress and is not useful yet. Cocoa/Objective C generates a lot of errors which is making creating a suppression file harder than I initially anticipated.
Change-Id: I045ba1eb9ae627a063a09422f6b5c2bfe6a225ac
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: hjk <qthjk@ovi.com>
This reverts commit 9358f7eaa4.
The change is source incompatible and hasn't been agreed upon. Revert
it even though it's correct in principle. It's simple to keep the old
enums around for compatibility.
Change-Id: I8d9d33868e44d0299a3f081833b06cedf0ed4345
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
All documented classes under src/widgets should now be
under the QtWidgets module in the documentation. The
QtPrintSupport classes should now be under the QtPrintSupport
module in the documentation.
Change-Id: I236b15443b8b93a61578a1d10f52b64dba938f29
Reviewed-on: http://codereview.qt-project.org/5520
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
there is no such category in the Unicode specs. the QChar::NoCategory
was a subject of bugs since it was introduced. int 4.6 it's meaning was
limited to mention ucs4 > UNICODE_LAST_CODEPOINT only (which is useless anyways)
in order to preserve the old (wrong) behavior.
fix it now for qtbase
Change-Id: I630534824e071090b39772881e747c1fdb758719
Reviewed-on: http://codereview.qt.nokia.com/1584
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Correctly declare that the tests depend on the Qt build having testlib.
Change-Id: Icf3332bc81a10e701316f1cd7021d2f6d3c2f424
Reviewed-on: http://codereview.qt.nokia.com/158
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* 'master' of git://scm.dev.nokia.troll.no/qt/qtbase-staging: (21 commits)
Fixed line endings.
Update licenseheader text in source files for qtbase Qt module
New configure.exe binary
Add -qpa option on Windows
Use qglobal.h's VERSION number instead of hardcoded current version
More examples adjusted to Symbian and Maemo5. (cherry picked from commit a97b9620a584c9b1a2e006873183526b3d7e001e)
Doc: Added some details to the accessibility events API documentation.
Doc: Fixed qdoc warnings.
Doc: Fixed qdoc warnings.
Doc: Made an additional change for clarity.
Doc: Noted that the example will not work as expected with a mouse.
Doc: Fixed qdoc warnings.
Doc: Applying a pending change from previous merges.
Doc: Fixed qdoc warning.
Doc: Fixed qdoc warnings.
Doc: Applied pending fixes to API documentation.
Doc: Various fixes to documentation, some based on changes in master.
Doc: Added missing project and desktop files.
Doc: Documented the value returned when no field can be found.
Squashed commit of changes from the 4.8-temp branch.
...
Move Qt's copy of the Mozilla public suffix list from QtNetwork
to QtCore and use it to expose a new API function QUrl::topLevelDomain().
This function returns the section of the url that is a registrar-controlled
top level domain.
QtCore now exports a couple of functions to the other Qt modules: qTopLevelDomain,
a helper function for QUrl::topLevelDomain(); and qIsEffectiveTLD(), a helper
function for QNetworkCookeieJar.
The motivation for this new API is to allow QtWebKit implement a Third-Party
Cookie blocking policy. For this QtWebKit needs to know the element of the url
that is the registry-controlled TLD. Without this knowledge it would end up
blocking third-party cookies per host rather than per registry-controlled domain.
See also https://bugs.webkit.org/show_bug.cgi?id=45455
Merge-request: 1205
Task-number: QTBUG-13601
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
(cherry picked from commit 154402f56dcf8303a6ce601a52215226af8d31ba)
This is the beginning of revision history for this module. If you
want to look at revision history older than this, please refer to the
Qt Git wiki for how to use Git history grafting. At the time of
writing, this wiki is located here:
http://qt.gitorious.org/qt/pages/GitIntroductionWithQt
If you have already performed the grafting and you don't see any
history beyond this commit, try running "git log" with the "--follow"
argument.
Branched from the monolithic repo, Qt master branch, at commit
896db169ea224deb96c59ce8af800d019de63f12
