For the comparison of a QFuture<int> and an int, gcc creates code that
creates a qfloat16 instance, as can be seen when stepping through this
code:
QFuture<int> future;
int five = 5;
if (future == five)
return five;
Explicitly get the result of the QFuture to compare as a workaround.
Change-Id: Id2adc2268dbc0ccec7df3a9786c9d29dcdc04da3
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Requires subsequent re-numbering of the enum tables to eliminate gaps,
before locale data can be regenerated. However, it will work with the
present locale data, since it merely loses the means to use some names
for which the available data was just the name and code. This implies
a transient issue of recognising some codes for which there is no
actual enum member; but relevant code will work as before, finding
nothing but the code and its name. This shall be resolved by a coming
BiC change to resort the language, country and script codes, changing
the numbering (almost) completely.
[ChangeLog][QtCore][QLocale] Various obsolete language and country
codes have been removed. Some lacked locale data, others were obsolete
aliases. All have been deprecated in 5.15.
Task-number: QTBUG-84669
Change-Id: I45fc76a5f2f6c3b0ea3c1bb61e917da984183783
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Please note, that in case of run with promise it doesn't make
sense to provide the overload taking the FutureResult, as if we are
going to ignore the returned QFuture object, we can't communicate
with the passed QPromise.
Fixes: QTBUG-87083
Change-Id: I4066506736c2bbeea3e42030b9495f13e06cb27e
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Otherwise XOpenDisplay in a newly spawned process may fail with
a 'No protocol specified' message (as it recently happened in
CentOS 8.1 vm).
Fixes: QTBUG-87621
Pick-to: 5.15
Change-Id: Ib6c08c7f154fb2a126d32a4aa52b535e5daa1589
Reviewed-by: Liang Qi <liang.qi@qt.io>
As advocated in a ### Qt 6 comment.
[ChangeLog][QtCore][QItemSelectionRange] QItemSelectionRange no longer
supports ordering. The prior ordering was inconsistent with equality
and should not be needed.
Task-number: QTBUG-85700
Change-Id: I5eb372c203cae19db40fa67f706d911785652d5f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Ready for removal at Qt 6, as advocated in a ### comment.
It was never done consistently with operator==(), apparently, and
should not be needed in any case.
[ChangeLog][QtCore][QItemSelectionRange] Ordering of
QItemSelectionRange is now deprecated. It was not consistent with
equality and should not be needed.
Task-number: QTBUG-85700
Pick-to: 5.15 5.15.2
Change-Id: Ie99294bd7fc18f2a497598ae08840886b0a6d62d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Append was previously optimized for lhs being empty but it should've
also taken into account if space had been reserved.
Apply the same optimization to prepend while we're at it.
Change-Id: I5e5d33a3189b9ad88d45e858a2ac412cbc294f79
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QLocale] Deprecated several Language and Country
aliases, ready for removal in Qt 6.0, in favor of their newer names.
Task-number: QTBUG-84669
Pick-to: 5.15 5.15.2
Change-Id: Iebaa0a5a77bfa12f7014de53fab4a25b5f1cc92c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
These are languages for which CLDR does not even recognize the claimed
language code (three-letter codes except for bh = Bihari, which might
be an old name for bho = Bhojpuri, which CLDR does give, but provides
no locale data using it).
[ChangeLog][QtCore][QLocale::Language] Many obsolete language names
are now deprecated in preparation for removal at Qt 6.0. No data has
been available for any locale using these languages since CLDR v29 (at
least; Qt now uses v37).
Task-number: QTBUG-84669
Pick-to: 5.15 5.15.2
Change-Id: I2bf2d49211ade7cc511277f35fb1a247e7048b31
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Testing the mouseMoveCount before XFAIL'ing before then testing the
mouseRelaseCount was anyway wrong.
Change-Id: I666f143ff15088562fc63f833f5785f870de6f26
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This reverts commit 1918c689d7.
The template gets always instantiated in QObjectPrivate::connect, even
if the connection types is not Qt::(Blocking)QueuedConnection. For
non-queued connections we however support using incomplete types in
connect. The only way to fix this would be to make the connection type a
template parameter of QObjectPrivate::connect (or at lesat pass some
compile time constant indicating "blocking"-ness) along, so that we can
use if constexpr instead of if. As all involved classes are private, we
can postpone investigating this solution to 6.1
Change-Id: Ieffaf015f8e60ca6ac6f85eb9e2756e480060b4f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This patch reverts the last attempt to fix it:
4a1de178c9.
In addition, instead of using imprecise QTest::qSleep()
we trigger a single shot PreciseTimer twice
and gather the measurements in lambdas.
We wait for lambdas to be executed - we give it
twice as much time as is in theory needed.
Afterwards we verify all the data collected in lambdas.
Fixes: QTBUG-82825
Change-Id: Ib691f5f23a92fb8b41a24f7b603981d9c9450ddc
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It's been deprecated since Qt 4.1.
Task-number: QTBUG-85816
Change-Id: Iafc6340716556f54fc5472c60035bb57461b842f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
For historical reasons Qt Concurrent reports QUnhandledException in
case if an exception that is not derived from QException is thrown
from a worker thread. Changing this behavior may not be a good idea,
since the existing user code may rely on it. Changed QUnhandledException
to wrap the std::exception_ptr to the actual exception, so that the
users can obtain the information about the thrown exception if needed.
[ChangeLog][QtCore][QUnhandledException] Improved QUnhandledException to
store the std::exception_ptr to the actual exception thrown from a
QtCocnurrent worker thread.
Change-Id: I30e7c1d3e01aff6e1ed9938c421da0a888f12066
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Ubuntu changed the default level from 1 to 2 and not accepting our
RSA 1024 anymore. While we are not testing the TLS library's strength,
we re-generate a ceritficiate to shut the thing (the botched, 'fixed' OpenSSL)
up for good.
Task-number: QTBUG-86187
Change-Id: I6151ce5210972ae938e52731157742910363afbe
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
When converting the year as an integer via the locale then it can add
in group separators which would not be desired here. Therefore it should
be converted via the QDate approach to get the right output for the year.
Fixes: QTBUG-86307
Fixes: QTBUG-85966
Pick-to: 5.15
Change-Id: I092bd1e5f69e544843fd5f28c96b94c9066490c5
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Our tls certificate/key are a bit on the old side and need to be
updated. But for now let's lower the openssl level. In this case openssl
complains about the server's key used for DHE being too short.
Task-number: QTBUG-86187
Change-Id: I142a7d52f7599f60b8f4f3ff3ac5ce61fed06b4c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The old test harness used to spit out stderr only, but
to be on the safe side we spit out both.
Change-Id: Ib8e57fd1b0e4d8542ac552a6fe58c07016df7f5f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When cross-building Qt with CMake to target qemu configs in the CI,
we specify the -DQT_BUILD_TOOLS_WHEN_CROSSCOMPILING=ON option to also
cross-build tools (like qmake).
In this case, $prefix/bin/qmake points to the cross-compiled qmake,
and the shell script that wraps the host qmake is called
$prefix/bin/host-qmake instead.
In such a scenario, tst_qmake ends up running the cross-compiled
qmake, which thinks that it's being run on device (via user-space
qemu emulation) and doesn't specify the sysroot when computing include
paths, link paths, etc. This causes the test building to fail in
various ways.
To fix the test, check for the existence of the host-qmake wrapper,
and if it exsists use it instead.
Task-number: QTBUG-86053
Change-Id: Iaa4afdf11b17f23abef873dd15b1ed950126ab8c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The qdatetimeparser was not tested explicitly so far, but only
implicitly in tst_qdate / tst_qdatetime / tst_qdatetimeedit etc.
This made it difficult to test some corner cases, especially in the
context of unfinished dates, i.e. dates which are invalid, but could
become valid by adding more characters. This is used to validate
user input in qdatetimeedit.
Task-number: QTBUG-84334
Change-Id: I27202849abb1b7cad96d3e25f7ac81ce85272b2a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Move it to the section requiring SSL tests since it
requires QSslConfiguration.
Change-Id: I5c807976ce75fa5967bddb8edd7788dbfbb89375
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
* Rearrange the documention to match the enumeration order.
Fixes: QTBUG-87037
Change-Id: Iad001351e0f309e694b8bbd503813017e6586a21
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
It's been obsolete for a long time already. Make sure
the compiler now warns about it and remove all remaining
uses in qtbase.
Change-Id: I0ff80311184dba52d2ba5f4e2fabe0d47fdc59d7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This mostly reverts change 76e8e8e9c8.
The reason is that storing non relocatable types inline in
QVariants storage would implicitly make QVariant non relocatable.
Fixes: QTBUG-87686
Change-Id: I2a09b1dcdd907d60085dccf17f987086dcba878c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Keep this in sync with the changes we have done in QTypeInfo.
Change-Id: Iaacb0f3cc5c46d3486084a1f6eca480a233d5e1a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add a almost trivial benchmark for QString::number(int).
Change-Id: Ice67eaf28e8d7b235fd5ec5e0b87b3b9053ae61e
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Move the existing “kitchen sink” test out of the way,
and rename it to “kitchensink”
Change-Id: I121260e640bb2810a94f8112fcea212e97055fb3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QList::parameter_type is defined and used to give better
performance e.g. for arithmetic types. Let's use it consistently
in QList API instead of const T &
Change-Id: I2e12bd83f55679b55a14fbb23ab6172a9cf7bbcc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
on Ubuntu 20.04
There is some issue with the glib event dispatcher.
Task-number: QTBUG-87728
Pick-to: 5.15
Change-Id: I4d64206898dd2c8356d5fc51a68c2e5759b38aac
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
RFC2822 requires times to be in the format 'HH:mm' or 'HH:mm:ss'.
We did not have unit tests to check that malformed RFC2822
dates are rejected. This patch adds such unit tests for
truncated hours/minutes/seconds.
Change-Id: Id5b9390112e633e617722439ad59439e6aeba841
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In Qt Quick, when we deliver an item-specific QTouchEvent that contains
only the subset of eventpoints that are inside the Item's bounds,
traditionally the Item can accept the event to tell the delivery logic
that the event is handled and doesn't need to be delivered further.
But an Item cannot be expected to have total scene awareness; so now,
the delivery is "done" only when all eventpoints in the original event
are accepted. This behavior has been working well enough already due to
logic in QQuickWindow that iterates the points and accepts them if the
event is accepted; but it seems appropriate to move this enforcement
into QPointerEvent itself. Making setAccepted() virtual gives us a
useful degree of freedom.
Event-handling code should alternatively use QEventPoint:setAccepted()
or QPointerEvent::setExclusiveGrabber() to take resonsibility for only
a subset of the touchpoints.
Another way to put it is that we treat QPointerEvent::setAccepted() as a
convenience method: accepting the QEventPoints is what counts (at least
in Qt Quick).
Change-Id: Icec42dc980f407bb5116f5c0852c051a4521105a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Leave the normalizedPos warnings, there is no equivalent function.
Change-Id: I50c72ab24b4855e36941aafdee30cdb0e94c1684
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
We cannot rely on "QString a; a.insert(0, u'A');" to give
a.capacity() >= 3, this is clearly an implementation detail. Changed
the check to a meaningful one
Task-number: QTBUG-87416
Change-Id: I2e017c1292d360e32b85b903361027485c08ea74
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Index of the last visible tab was not updated, if a new tab was inserted
after the current tab and before the last tab.
When the new tab is inserted before the last visible tab, the index of
the last tab increments by one.
When the new tab is inserted after the last visible tab, then the newly
inserted tab becomes the last visible.
Fixes: QTBUG-86898
Change-Id: I2f4b7f705261ec35a5aa7b883ecdddba25f007b7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Extract checkPositions helper function to re-use in the new test.
Task-number: QTBUG-86898
Change-Id: I5c8241b5701cd8c8c3e21607c385217d4b75e728
Reviewed-by: Jordi Pujol Foyo <jordi@vikingsoftware.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Expose event would not be sent when window was resized
Fixes: QTBUG-69155
Pick-to: 5.15
Change-Id: I81bf2d54f830a0dabf15398e1f25b55ff7ff4479
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Rami Potinkara <rami.potinkara@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
Failure to copy m_inputEvent and m_pointerEvent actually left them
uninitialized, and resulted in random behavior in Qt Quick when
Flickable clones a pointer event for later replay.
Remove the comment about copying events being a "bad idea" in Qt 4,
while we're at it. Copying became more common in Qt 5, and we
probably won't be able to stop doing it now.
Change-Id: I40b6ba5ad696e7aaafbeefbca86eca00cab40616
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Unlike the 32-bit version, we can't go to a bigger integer type to do
the multiplication with. So instead accept looping. Both libstdc++ and
libc++ implement std::uniform_int_distribution this way anyway, but in a
far more complex way.
There is no looping if the "highest" is a power of two. The worst-case
scenario is when "highest" is one past a power of two (like 65). In that
case, we'll loop until the number is in range. Since all bits have equal
probability of being zero or one, there's a 50-50 chance that the most
significant useful bit will be set[*], in which case we'll need to loop
and we again get the same probability. So on average, we only need two
iterations to get an acceptable result.
[*] There's also a possibility that the other bits are such that the
number is still in range. For 65, we'd need the other 5 bits to be zero
(64 is a valid result), but the probability of that is only 1/2^5 =
3.125%. The bigger "highest" is, the closer we get to zero, so
approximate by saying that never happens and instead calculate that the
most significant useful bit is the controlling one.
[ChangeLog][QtCore][QRandomGenerator] Added 64-bit versions of the
bounded() functions. They are useful in conjunction with Qt 6's 64-bit
container sizes, so code that used to call bounded(list.size()) in Qt 5
will continue to compile and work in Qt 6.
Fixes: QTBUG-86318
Change-Id: I3eb349b832c14610895efffd16356927fe78fd02
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This saves duplicating them with its own flags.
Task-number: QTBUG-85700
Change-Id: I9e938322fd787282cfd9f941f83af8c0d76aaa9d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
