headFromHttp hasn't been flaky since 5.14 times according to grafana,
does not fail locally.
Same situation with ioHttpRedirect as above.
ioHttpRedirectMultipartPost has not failed on Windows since october
2019, assumed stable now.
backgroundRequestInterruption no longer exists.
ioPostToHttpFromSocket would fail in debug MSVC builds but was
fixed in 710886fbdd.
Task-number: QTBUG-88943
Change-Id: Ida640179ef15a3452291745e4e94a71a385f57ae
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The intention was always that you can define properties that do
not require a changed signal. But having to explicitly pass
a nullptr as signal parameter into the macro is ugly, so
use the cool QT_OVERLOADED_MACRO to make it optional.
Pick-to: 6.0
Change-Id: I0ce366d043850f983c968d73c544d89933c48df9
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The windows library user32 is no longer a known library for qmake; add
it explicitly.
Pick-to: 6.0
Change-Id: I61f44e8a2cbccbabbdc5d58bd2615b431097aafd
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Similar to the previous commit which applied to QCborStreamReader, don't
allocate too much data before checking that the stream actually has that
much.
Pick-to: 5.15 6.0
Fixes: QTBUG-88256
Change-Id: I7b9b97ae9b32412abdc6fffd16454b7568a063ba
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
By calling the internal readStringChunk() function with a QByteArray
pointer, QCborStreamReader::readByteArray() can now avoid allocating the
resulting buffer until the internals have confirmed that there is
sufficient data in the incoming buffer. As a result, we first detect the
EOF condition before we conclude the payload would have been too big for
QByteArray (validation()) test. Meanwhile, the hugeDeviceValidation()
test ends up with a few conditions where it would have copied 1 GB of
data, so limit that too.
We make a choice of reporting OOM vs DataTooLarge only if QByteArray
fails to allocate in the first place (QByteArray::resize() ->
Q_CHECK_PTR -> qBadAlloc, QtCore is always built with exceptions on).
The QCborValue unit test needed a temporary work around until we apply
the same allocation fix (see next commit).
Pick-to: 5.15 6.0
Fixes: QTBUG-88253
Change-Id: I7b9b97ae9b32412abdc6fffd164523eeae49cdfe
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Previously a default constructor was required for the result type
of mappedReduced() and filteredReduced(), even if a default value
was provided.
This patch fixes the problem.
The issue was in the ResultReporter type, that was calling
QList::resize() to adjust the size of expected reported results.
A default-value parameter was added to the class, so that
a corresponding overload of QList::resize could be invoked.
Task-number: QTBUG-88452
Change-Id: I51113753e314d76aa74d201b5a7e327a6ca75f47
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
QColors were not premultiplied before being set.
Pick-to: 6.0 5.15 5.12
Change-Id: Id3765b6932a72374ddfd788fae4bb628a4edf0b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Just like it was done in the .pro file.
Pick-to: 6.0
Change-Id: I7def52127f4bab6f0ef490ac7eee2de2da479352
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If a QBindable is created from a computed property, it is not possible
to actually set a value or a binding. If we try to do it anyway, we'd
get a crash. Thus we now check whether the function pointer is null
before invoking it.
Pick-to: 6.0
Task-number: QTBUG-87153
Change-Id: I5bedb9080ccf79d9b8166b80d5733d095ed76f8d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The hash and equality operators used need to be consistent with
each other. Unfortunately, QPMI::operator==() is not suitable to do
this. So specialize qHashEquals() for QPMI.
Fixes: QTBUG-88966
Change-Id: If5f19a722ae9fc4e78e93537e7ea15726f148768
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
(cherry picked from commit 83e95956ed58e88b11e2cc3cb61c5beacb7985db)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Amend 53b7cb1bd7, match() is only used
to provoke data races.
Change-Id: Id20b11fedf7f20e74baab15bbb60c995c1a0c794
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It was previously untested
Task-number: QTBUG-88183
Pick-to: 6.0
Change-Id: Icc59fc632957a75cac8c7f5e2a1aed88a1c9ff9d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test in general is fine, but it was making an assumption that the
first 5 readyRead emissions would never result in the whole message
being received. In certain scenarios with slowdown however it was still
possible that we would receive the whole message after just a few
readyReady emissions. While I didn't check it's most likely due to a
mechanic in the QNetworkReply machinery where we suppress some
emissions if we know there's more data just about to be available.
Task-number: QTBUG-88943
Change-Id: I0cf06edb34d4e86cc8a42c0f1cd7e8c35765f6ee
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It's not _wrong_ to time out when connecting to something unreachable
(it's just a different way of handling it) so we shouldn't fail when
this happens either.
In local testing (windows) it times out after 8 seconds, so bump
the timer to 10 seconds. On systems where it's faster there'll be
no difference as long as things don't go wrong.
Pick-to: 6.0
Fixes: QTBUG-89089
Change-Id: I8437cf8e4fbecedea2391ed87fdce1213085b964
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Add test for qRound that covers some edge cases for rounding. Note that
as of right now, this test fails and the docs have been updated to warn
that it should not be depended on for strict correctness.
Change-Id: I1a61bca47abd77855fe7c13ded44e913cc7e8722
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Which contains a lot of 'macos'/'osx' black-listed auto-tests. They
mostly fail with SecureTransport (on BigSur) because SecTrustEvaluate()
does not like our old certificate. Instead, since SecureTransport
is deprecated anyway and we are not planning to develop it in future,
skip the related auto-test depending on QT_CONFIG(securetransport).
Task-number: QTBUG-88943
Change-Id: I5f6cb7b2d0ea15c445603c1ff3e1700f123c28d1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It was blacklisted due to the issue there. The issue is resolved, but
the blacklist stayed.
Task-number: QTBUG-88943
Change-Id: I7d9a660a17c1463dd8b654752ed5787fe5f5af24
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
If the first font in the families list happens to have been
disambiguated because of duplicates, two things went wrong:
1. hasFamily() would return false for the font family, because
it does not disambiguate when checking for the family name and
only checks if the families list contains the exact string.
2. Adding aliases to the full disambiguated string is not supported,
only the family name.
The first issue has been reported separately as QTBUG-89068.
The test failure is fixed by just avoiding the fonts that
are ambiguous in the test, as it really doesn't matter which
font we pick.
Fixes: QTBUG-89008
Pick-to: 5.15 6.0
Change-Id: I829778c2e7bb6090475c34dcf9cdce58862729d6
Reviewed-by: Liang Qi <liang.qi@qt.io>
Use a trick similar to the one we use for their ranged
constructors: support predicates that either take a
container's iterator, or that take a std::pair (for STL
compatibility).
[ChangeLog][QtCore][QMap] Added removeIf() and erase_if().
[ChangeLog][QtCore][QMultiMap] Added removeIf() and erase_if().
[ChangeLog][QtCore][QHash] Added removeIf() and erase_if().
[ChangeLog][QtCore][QMultiHash] Added removeIf() and erase_if().
Change-Id: Ie40aadf6217d7a4126a626c390d530812ebcf020
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The requests will remove themselves once they get deleted
but since the deletion is done through a _queued_ invokeMethod
to 'deleteLater' we will call
QHttpNetworkConnection::_q_startNextRequest first which may
end up starting a reconnect of the TCP socket which we had the error on.
In this specific instance it manifested as a race condition where we
either don't get a proxyAuthorizationRequired signal at all (it was
emitted while we didn't have any valid replies), or we get the signal
emitted too late and it gets emitted on whatever the next reply was.
Task-number: QTBUG-88417
Pick-to: 5.15 6.0
Change-Id: If3f8ececc5550f1868c90124559cb8e3029646d8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We already have all we need in QHash to support this, so the addition
is simple enough.
Add test checking how many copies and/or moves are needed for a single
insert.
As a drive-by: remove some unneeded static_cast
Change-Id: Iaf768657644afa45f78f5c81ffcf89ba9607be96
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In preparation for the next changes.
Change-Id: Ibe0635dfa040842073749aa3e2ae140f27dc983a
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QEventPoint instead of TouchPoint: we have source compatibility for that,
but we can use the new type to avoid the deprecation warnings.
Some position accessors have been renamed too.
Change-Id: I5bfe5bc853931127a883d2bd61fab122495fd427
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Add QMetaType::hasRegisteredDataStreamOperators() to complement
the method to check whether a data stream operator exists.
Fixes: QTBUG-82916
Change-Id: Ib2f841131b7c401d5a3ae76d49104e41697c4eac
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QHeaderView sorting may be triggered when the user performs
some mouse interactions that should really not result in sorting.
Generally speaking, this happens when the user:
* presses on a non-movable section (A)
* moves on another section (B)
* releases on that section
resulting in B becoming sorted / flipping sorting.
(Non-movable is required, otherwise dragging would cause section moving,
not sorting.)
To make the matter worse, QHeaderView doesn't check that the release
happens within its geometry. This makes sense when moving sections: one
is able to drag a section horizontally/vertically even if the mouse
leaves the QHeaderView.
But when not moving sections, this means that one can
* press on section (A),
* move the mouse anywhere vertically (for a horizontal bar, mut.mut
for a vertical) above or below another section (B), that is,
outside QHeaderView's geometry
* release the mouse
and cause B to be sorted.
Fix it by
1) remembering which one was the section that the user originally
clicked on; that's the only one that can possibly become sorted
(if we're not moving and other conditions hold). No other variable
seemed to remember this.
2) on release, check that it happens within that section's geometry.
If so, sort.
Pick-to: 6.0 5.15
Change-Id: Icfb67662221efbde019711f933781ee1e7d9ac43
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Avoid spurious bindings by resetting the binding state before calling
the setter of eager properties.
Fixes: QTBUG-88999
Pick-to: 6.0
Change-Id: I1e3b5662307d906598335a21d306be9c606529d4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Currently untested
The socks case is odd: after accepting the first connection it shows as
unconnected. Details as for why is unknown, out of scope of adding this
test.
Pick-to: 6.0
Change-Id: I0e7658f23b89f3af8db379b001ee33a844f3bec4
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It didn't initially have tests. To avoid relying on realizing
breakage implicitly through other classes we'll just add tests instead.
Task-number: QTBUG-88183
Pick-to: 6.0
Change-Id: I7449dc1f9a118d4b7a8158a2c34563dbd9c43c66
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This patch disables four failing unit tests when executed with the
offscreen backend.
Change-Id: Ie67341b886984e6de19cd8dd8a8a237a620a1b7a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
And also, reduce the utter sloppiness, weirdness of the test and
make it more a test and not a joke. Since the test itself depends
on !QT_NO_SSL, why bother building and running its main, to create
a useless tst_QSslError and do nothing then? Exclude test from
no-ssl build.
Pick-to: 5.15
Pick-to: 6.0
Change-Id: I67879b0de036cbc8c2f75a18f4cf94e6c43c5af0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
And inline the fast checks inside the methods in QBindingStorage.
This allows QObjectBindableProperty and friends to inline all the
fast checks and almost completely eliminates the overhead for property
accesses when no bindings are being used.
Read and write times of QObject based properties when no bindings
are being used:
Read Write
Old style property: 3.8ns 7.3ns
QObjectBindableProperty (no notification): 4.5ns 4.3ns
QObjectBindableProperty (with signal): 4.5ns 7.6ns
QObjectBindableProperty (inline accessors): 3.2ns 3.4ns
Numbers without this patch:
Old style property: 3.8ns 7.9ns
QObjectBindableProperty (no notification): 7.2ns 7.7ns
QObjectBindableProperty (with signal): 7.2ns 16.0ns
QObjectBindableProperty (inline accessors): 6.3ns 6.7ns
Change-Id: Ifd1fa3a489c3be8b1468c0b88af547aac397f412
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
(cherry picked from commit 98c82fb445acf45cc4c4bc86a5adda43358127bf)
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
QSslCertificate::verify() has an undocumented and not very desirable property -
on some platorms it updates the default configuration, which can be surprising.
For example, we deprecated QSslSocket::setDefaultCaCertificates() and recommend
using QSslConfiguration::defaultConfiguration(), QSslConfiguration::setDefaultConfiguration(),
and QSslConfiguration::setCaCertificates(). If an application does this to select
CA roots it trusts explicitly, and then for some reason is calling verify, the
application can have its QSslSockets successfully connecting to a host, whose
root was not trusted by the application. Also, on Windows, defaultCaCertificates()
include system roots already, no need to have them twice.
[ChangeLog][QtCore][QtNetwork] QSslSocket::verify - do not change the default configuration
Pick-to: 5.15
Pick-to: 6.0
Pick-to: 6.0.0
Fixes: QTBUG-88639
Change-Id: I1cd40b259d0a6dcd15c78d1e7c027ff10859595c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
And extend an auto-test for this. When a cookie verification mechanism is
enabled, and verifier, indeed, verifies that some datagram is a 'Client Hello'
message with a proper cookie attached, we start a real DTLS handshake creating a
QDtls object and calling 'doHandshake'. In case cookie verification
was enabled, we need parameters from the verifier (it's a crypto-strong
'number' and hash algorithm) to 'lock and load' the TLS state machine in
a freshly created TLS session object. This code path previously was only
tested manually and was found by LCOV as untested.
Pick-to: 5.15
Pick-to: 6.0
Change-Id: Ieacb8c989997999ea10e15bda6ae106a0338b698
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
And do not run the test with QSslSocket::supportsSsl() returns false -
this may mean unresolved symbols and thus missing functionality,
like i2d_X509 etc. This also makes cases more like other, that already
had those checks.
Fixes: QTBUG-87386
Change-Id: If4e9a650ca325b6f70956f532891a4c1d50465c0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Some code-paths were never executed by auto-test, thus giving us LCOV's
diagnostic. Extend existing tests and add new ones.
Pick-to: 5.15
Change-Id: I648747547f0525a482216b1e1972fcc698c73f65
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QMetaObject::indexfOfMethod returns the method corresponding to a
specific signature. In QML, we however only want any of the methods with
a given name (and do overload resolution at a later point).
For this usecase this patch introduces the internal
QMetaObject::firstMethod function.
Change-Id: Ie3820354edffb273c4cbe1399201a955ebe79344
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
std::optional<int> is the wrong datatype to use for compare.
First and foremost, it can't be used in the idiomatic form of
auto r = a.compare(b);
if (r < 0) ~~~ // a is less than b
if (r > 0) ~~~ // a is greater than b
which we *already* feature in Qt (QString, QByteArray).
Also, std::optional<int> (explicitly) converts to bool, which is
a trap, because the result of the comparison can be accidentally
tested as a bool:
if (a.compare(b)) ~~~ // oops! does NOT mean a<b
Not to mention extending this to algorithms:
auto lessThan = [](QVariant a, QVariant b) { return a.compare(b); }; // oops!
std::ranges::sort(vectorOfVariants, lessThan);
which thankfully doesn't compile as is -- std::optional has
an *explicit* operator bool, and the Compare concept requires an
implicit conversion. However, the error the user is going to face
will be "cannot convert to bool because the operator is explicit",
which is deceiving because the fix is NOT supposed to be:
auto lessThan = [](QVariant a, QVariant b) { return (bool)a.compare(b); }; // big oops!
Instead: backport to Qt the required subset of C++20's <compare>
API, and use that. This commits just adds the necessary parts
for compare() (i.e. partial ordering), the rest of <compare>
(classes, functions, conversions) can be added to 6.1.
Change-Id: I2b5522da47854da39f79993e1207fad033786f00
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
(cherry picked from commit 3e59c97c3453926fc66479d9ceca03901df55f90)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
In addition (and as a fallback) from requiring qHash, add support
for std::hash specializations. This catches two birds with one stone:
1) users of Qt can simply specialize std::hash for their datatypes,
and use them in both QHash and stdlib unordered associative containers;
2) we get QHash support for any (stdlib) datatype that is hashable
without having to overload qHash for them.
[ChangeLog][QtCore][QHash] QHash, QMultiHash and QSet now support
for key types anything that can be hashed via std::hash, instead of
always requiring a qHash() overload.
Change-Id: Ib5ecba86e4b376d318389500bd24883ac6534c5f
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
If one clicks on a QHeaderView's section, the header view will
sort the view by the respective column/row. By clicking multiple
times, one is able to toggle the sorting between ascending
and descending. Something that is NOT possible to do however is to
un-sort the view -- that is, to restore the model's original
sorting. This must be done via code, by asking the header or the
view to sort by section -1.
This commit adds new property to QHeaderView to make it possible
to unsort models. Basically, the sort indicator becomes a tri-state:
sort ascending, sort descending, unsort (sort by column -1).
[ChangeLog][QtWidgets][QHeaderView] Added the sortIndicatorClearable
property. Setting this property allows the user to clear the sort
indicator on a section, resetting the model to its default ordering.
Change-Id: Ibf4e280b2086b75ccd64d619ea4d70816dc3529f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
- Add tests for QCollatorSortKey
- Add test for QCollator copy assignment and copy construct
Currently QCollatorSortKey tests are working properly only
with QT_CONFIG(icu)
Task-number: QTBUG-88546
Change-Id: Ic35dfd33038cc736245904b78fe4383a5a11b580
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Q_MOVABLE_TYPE was conceived before C++ had move semantics. Now, with
move semantics, its name is misleading. Q_RELOCATABLE_TYPE was
introduced as a synonym to Q_MOVABLE_TYPE. Usage of Q_MOVABLE_TYPE
is discouraged now. This patch replaces all usages of Q_MOVABLE_TYPE
by Q_RELOCATABLE_TYPE in QtBase. As the two are synonymous, this
patch should have no impact on users.
Pick-to: 6.0
Change-Id: Ie653984363198c1aeb1f70f8e0fa189aae38eb5c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
This patch removes two unused variables and marks one unused, fixing
three warnings.
Change-Id: I71f59839452590b82ffb5459a968f06bd434fb9a
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Conform to the XDG Base Directory Specification:
"If, when attempting to write a file, the destination directory
is non-existent an attempt should be made to create it with
permission 0700. If the destination directory exists already
the permissions should not be changed."
At the same time the spec states about XDG_RUNTIME_DIR that
"its Unix access mode MUST be 0700", so don't consider the
directory with wrong permissions correct and use a fallback.
Task-number: QTBUG-68338
Pick-to: 5.15 5.12
Change-Id: I03c6b35b3f7d5ceb8e6326695bfc8207da92ea67
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Except for types marked as unresolved, we're doing it anyway - the only
difference is that now we skip looking up the metatype by typeid.
[ChangeLog][QMetaProperty][Important Behavior Change]
QMetaProperty::typeName returns now always the same name as name() of the
corresponding metatype. This can cause a change for enum properties
which were not fully-qualified.
Change-Id: I1f57743948b7262ac06095d3bbc838d620f6e481
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
If a testcase failed before we reached free, the QMetaObject would have
leaked.
Moreover, defer freeing until all tests have run: dynamic QMetaObjects
might create dynamic metatypes. If those were shared, we would run into
issues.
Change-Id: I2edfcb2605e58eaba454bfe0446a6b187a5210df
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Properties of non-dynamic classes always have the metatype stored, so we
can make use of it. Moreover, when the builder is converted into a
metaobject, we need to resolve the metatype anyway.
As a driveby, add a dedicated metatype test to tst_qmetaobjectbuilder.
Change-Id: I7eea0cd8fc2da5d92c7fc803f05cd81e3a9d4cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QSortFilterModel shouldn't forward dataChanged() when the source model changes data in columns that the filter model refuses
Fixes: QTBUG-86850
Pick-to: 5.15
Change-Id: I26565d119d2aa36ea07b3de0c15f1b137bc002f8
Reviewed-by: David Faure <david.faure@kdab.com>
The function is unused.
Change-Id: Ib2154398981c0db20a2096c83b371d12920e34ea
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: David Skoland <david.skoland@qt.io>
The former also does fuzzy comparison, but it reports what the values
were, if the test ever fails.
Change-Id: I36ecda1f69bf3f430c904b37cd8c3a23201ab7e2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Added tests for aliases and various calendar properties, ensured
dateToJulianDay()'s invalid date branch is exercised. Corrected
assertion when constructing from system and asserted calendarSystem()
is as expected.
Pick-to: 5.15
Task-number: QTBUG-88183
Change-Id: I510afcb5d9d115f68148d1f679f3224d712f92f4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QTextCharFormat::fontFamily is deprecated in favor of fontFamilies,
which returns a QStringList wrapped in a QVariant, whereas the setter
expects a QStringList.
Change-Id: I3333eaae4fc5ec3e3bdbec58047d6b3554b4a171
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
This test was failing but was returning a pass because of a bug
in androidtestrunner.
Task-number: QTBUG-88507
Task-number: QTBUG-88508
Pick-to: 6.0
Change-Id: I4fda7c2ddf8cd1e6858617e7bb447078c5768a75
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Since QHash is missing the overload, too, just ignore the hint for
now, but provide the STL-compatible signature so generic code can use
QSet as a normal sequential container.
[ChangeLog][QtCore][QSet] Added insert() overload taking an insertion
hint, for STL compatibility.
Change-Id: I9fe41877343ebff721b650fb7b9cd4e06b6608d8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Make the string into a list and call setFontFamilies.
Pick-to: 6.0
Change-Id: I1b70db784fd6e495b48917141d07bacd1e883882
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The right include is QTest, QtTest drags in all of QtCore.
Change-Id: Icc2964ccdb85fe1bfc9fe8f43351a4605a34329b
Pick-to: 6.0 5.15
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
One test in tst_qfiledialog2 only succeeded if the directory "~/foo"
did not exist. This patch changes the path used to "~/Vugiu1co"
which has hopefully a much lower probability of existing.
The string "Vugiu1co" is taken from a call to "pwgen".
Pick-to: 6.0
Change-Id: Ia82b07902a91eb908a74aa90cdbdf4761d432d9a
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
tst_qlibrary depends on a library (targets mylib and mylib2) to be
built. They create a library with the same name, in two versions.
This is done in order to test versioned library loading.
However, those two libraries were fighting over the creation of
"libmylib.so". In a fresh build, mylib2 wins, as intended. But after
a rebuild, mylib won, which led to failing unit tests.
This patch changes the situation. With this change, mylib no longer
tries to create "libmylib.so". Thus no fighting and no problem.
Pick-to: 6.0
Change-Id: Id89baa5503c9f078a8737ff0b8616edf09044f72
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When we are using the offscreen plugin, there might or might not
be a working system tray icon. This patch disables the unit test in
that case as we do not know what to expect.
Change-Id: I34fded516300cc9aab1eb67644dcef8631ecfdf1
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
- Add test for static hash() method
- Add tests for addData() overloads
- Add input data for sha384 and sha512
Task-number: QTBUG-88183
Change-Id: I7e16419b3a582468fd1de15613e1157af428bc4c
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
tst_qlibraries needs to test libraries to be built in order to run
successfully. However, these libraries were not mentioned as
dependencies in CMake.
This patch fixes that.
Fixes: QTBUG-88445
Pick-to: 6.0
Change-Id: Ic335e46664edd98217bd55a9bca5a58a39cffe66
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
By extending (a bit) an auto-test to cover paths found by LCOV. All of them
is just to trigger the code that checks input parameters.
Pick-to: 5.15
Pick-to: 6.0
Change-Id: I62f9a9045038ff8d123fd1396f4bfd85e75c6d8f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
By adding auto-tests that were missing/not triggering the paths found
by LCOV.
Pick-to: 5.15
Pick-to: 6.0
Change-Id: I472f59e8e7292786c80d7c8dcebde53a2982e1ec
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Not testing the result of the copying, just verifying that it doesn't
assert.
Pick-to: 6.0
Change-Id: Ib51129134b74c17eada7e3819ccfff10bb9affbf
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This information is required in the QML engine to handle list properties
(instances of QQmlListproperty<T> and list<T> types from QML).
Pick-to: 6.0.0 6.0
Change-Id: I1e30572f1c91f58b290cb9b4b07433af99a1db6f
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
[ChangeLog][QtCore][QFuture] Add convenience functions to create
a ready QFuture and a QFuture with an exception
Task-number: QTBUG-86713
Change-Id: Ic7f9ca590a8ea8a9696b84f35bad074780794461
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Suppress warning:
..\tst_qprocess.cpp:272:13: warning: 'void childProcessModifier(int)'
defined but not used ...
Change-Id: Idf601df78be256cfbee0ca80252d1c364c712c8e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
[ChangeLog][QtCore][QMargins] QMargins is usable in a structured
binding.
[ChangeLog][QtCore][QMarginsF] QMarginsF is usable in a structured
binding.
Change-Id: I0c501847b9377c47bd0e63da3735792075bd0079
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Coverage tests revealed that
QAnyStringView::compare(QAnyStringView, QAnyStringView, CaseSensitivity)
was not tested in our unit tests. This patch adds a test for this.
Pick-to: 6.0
Change-Id: Id8e0d8af87e7e7ab192fb7554a278ddbb890fb14
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_qprinterinfo compared the output of "lpstat -p" with the
result of a call to "cupsGetDests". "lpstat -p" only returns local
printers, "cupsGetDests" also returns printers on the local network.
This patch fixes the test by using "lpstat -e", which also
shows printers on the local network.
Pick-to: 6.0
Change-Id: Ia70adad8b8467f4c738f769d34757786fc9645b2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The QFont::fromString() needs to differ between strings
produced before and after Qt 6.0 when interpreting the
weight value, since in older strings this will be the legacy
scale.
Luckily the number of tokens in the string can be used for this
purpose, since many tokens were added in Qt 6.0.
This broke KDE, where font settings are stored in QSettings
and serialized using QFont::toString() from Qt 5.
Fixes: QTBUG-88589
Pick-to: 6.0.0 6.0
Change-Id: I199737fed61917f8b9d8f86176ead29a89eb8e0c
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
QPoint(F) are "naturally" destructurable in their x/y
counterparts (hello Mac/Carbon users, we don't live in 1999
any more, it's x and then y, and not vice versa...).
[ChangeLog][QtCore][QPoint] QPoint is usable in a structured
binding.
[ChangeLog][QtCore][QPointF] QPointF is usable in a structured
binding.
Change-Id: I8718a4e80be4ce03f37f012034f1fba009304b32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By simply extending the basic test to trigger qHash, isEqual and
a bunch of getters.
Pick-to: 6.0
Pick-to: 5.15
Change-Id: Ib1d88fc6d2ad623743cea77ac286ae6ac819dfd1
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Coverage analysis showed that QCalendar::YearMonthDate was not
rigorously tested. This patch adds a unit test.
Pick-to: 6.0
Change-Id: I0af485d13c4883764b61ea1e35455905cc77b966
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
QString::insert(qsizetype, QChar) can insert at negative positions,
then counting from the end of the string. Coverage analysis revealed we
do not have a unit test for this. This patch adds a unit test.
Pick-to: 6.0
Change-Id: I8d41b38df964c07fe2d2e7be444f8236c9e19b5d
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
tst_qsslcipher was quite useless - now we test that default constructed
QSslCipher reports expected values. Test the non-default from the
different auto-test, where we are sure we have really useful
ciphersuites (with different parameters obtained from a TLS backend,
where it's possible).
Pick-to: 6.0
Pick-to: 5.15
Change-Id: Iff14a0580fed889cf9e0873bee01d968773626db
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
... instead of failing the test. On Ubuntu 20.04 when calling
'connect' with 0.0.0.1 we get EINPROGRESS and nothing else,
since our own internal timer has 30 s. timeout, the event loop
in the test stops before this and no socket error detected yet.
Handle such situation without failing a test.
Fixes: QTBUG-88042
Change-Id: Id6add27fcf9bbbe5fbf83a193652edf08fbad8d6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Make sure ulonglong variant converts to a double JSON value when the
value is greater than 2^63.
Change-Id: I4d4392b05de29c220624056d5d0d4664fb2c08b7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By depending on setFamilies() then we can be sure that font names with
spaces, commas, quotes and so on are correctly handled without being
misinterpreted. For now it will split on the comma when a string
containing one is passed to setFamily. But from Qt 6.2 this will be
removed to preserve the family string as a convenience function.
[ChangeLog][QtGui][QFont] Indicated that setFamilies/families is
preferred over setFamily/family to ensure that font family names are
preserved when spaces, commas and so on are used in the name.
Change-Id: Id3c1a4e827756a4c928fed461a4aafa5a0f06633
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This reverts commit ee122077b0.
Reason for revert: This causes QProcess::readAll() to sometimes
return nothing after the process has ended.
Fixes: QTBUG-88624
Change-Id: I34fa27ae7fb38cc7c3a1e8eb2fdae2a5775584c2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
(cherry picked from commit 23100ee61e33680d20f934dcbc96b57e8da29bf9)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Ensure the values are reasonable regardless of screen DPI. Velocity
is supposed to be in logical pixels / second.
Task-number: QTBUG-88252
Task-number: QTBUG-88346
Change-Id: Ic209887f8ed0381c033a9ff04ae48b072c444df4
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QString::replace(pos, len, *unicode, size) can handle positions
which are outside of the this-string. In that case, it is a no-op.
Coverage analysis revealed we do not have a unit test for this.
This patch adds one.
Change-Id: Id4a407e860fff0d5c7c0a200c379e5e3961c86d2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Coverage analysis showed that an if-branch marked "Q_LIKELY" was never
taken. It turns out the code was incorrect, but behaved correctly.
This patch fixes the logic and adds a unit test.
Pick-to: 5.15
Change-Id: I9b4ba76392b52f07b8e21188496e23f98dba95a9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch adds a basic fuzzing test for
QDateTime::fromString.
Task-number: QTBUG-87104
Pick-to: 5.15
Change-Id: Icc51386f06f6d4d2a4495734f7fa45de80c6e065
Reviewed-by: Robert Loehning <robert.loehning@qt.io>
This was so far problematic as it gave various link errors. The solution
to that seems to be to make the default constructor of QPairVariantInterfaceImpl
constexpr to get around one set of problems.
The other problem to solve where undefined references to metaobjects. The
reason for that is apparently that QMetaTypeInterface contains a direct
pointer to the meta object, something the linker doesn't like. Adding a
level of indirection by using a function that returns the pointer seems
to solve that problem.
Fixes: QTBUG-88468
Change-Id: I5612ae807ea3b7e49bc40349d8d1fca1be9bd7ee
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
For bases other than 10, negative numbers have been converted
to QString by casting them to an unsigned number and
converting that. Thus QString::number(-17, 16) returned
"0xffffffffffffffef", for example.
This patch changes the behavior so that
negative numbers are converted like positive numbers.
Additinally, this patch adds unit tests for QString::number.
[ChangeLog][Important Behavior Changes]
Changed QString::number(integer, base) for negative numbers
and bases other than 10 to return the string corresponding
to the absolute value, prefixed by "-".
Fixes: QTBUG-53706
Change-Id: I0ad3ca3f035d553860b262f5bec17dc81714d8ac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QSortFilterProxyModel did not emit dataChanged when calling
setSourceModel() after modifying the source model.
QSortFilterProxyModel::setSourceModel and
QSortFilterProxyModelPrivate::_q_sourceReset(), _q_clearMapping
is called to delete the source_index_mapping. They also need to
call create_mapping function to re-create it.
Fixes: QTBUG-87781
Pick-to: 5.15
Change-Id: Idbe34696c9d3a2fbf354b653c870bac61378811d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Four code-paths that weren't tested are simply those with the
parameters swapped from code-paths we did test. In any case, the
float-distance between values should be symmetric, so test that.
Task-number: QTBUG-88183
Change-Id: I2060eb77b1abada5b0fd5f4557dbb1761c5cfd02
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Tests can run faster now, but we still expect calculations based on
the timestamp (such as QEventPoint::velocity()) to be correct.
Change-Id: Ie962604c9ebd139384dcd89a157de66b4b773cc9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Previously QFutureInterface::setProgressValue was silently ignoring
the progress range and allowed to set any progress value.
Also no checks were performed in QFutureInterface::setProgressRange,
which allowed the user to set minimum > maximum.
Add checking of the current progress range, when settings the
progress value.
Add checks for minimum and maximum values while setting the progress
range.
The implementation of the checks is mostly based on the logic
that is used in QProgressBar.
- If maximum is smaller than minimum, minimum becomes the only legal
value.
- If the current progress value falls outside the new range, the
progress value is set to be minimum.
- If both progressMinimum() and progressMaximum() return 0, the
current progress range is considered to be unused, and any progress
value can be set.
- When setting the value using setProgressValue(), if the value falls
out of the progress range, the method has no effect.
Task-number: QTBUG-84729
Change-Id: I29cf4f94b8e98e1af30dd46fbdba39c421cf66bf
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Add tests for QMessageLogger class to explicitly cover all
overloads of logging methods.
Task-number: QTBUG-88183
Change-Id: I8d551f4b066cc285101646230bd9a17869ada3c1
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
A QWindow created without an explicit geometry needs to pick up
a default geometry in the platform plugin. If the window has a
maximized of fullscreen window state, it will fill the entire
available geometry of the parent window (or the screen if there's
not parent window).
Fixes: QTBUG-69159
Fixes: QTBUG-69156
Fixes: QTBUG-69154
Pick-to: 5.15
Change-Id: If8565d92a97bb4b3fa44757e68969d54d0bc7ebe
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The low level implementation does not use it at all, so there's no
point having the iterator in QTypedArrayData. Having it in QList removes
and indirection and will lead to clearer error messages.
Change-Id: I4af270c3cdb39620e5e52e835eb8fe1aa659e038
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Fold the two overloads into one, and distinguish the cases using
if constexpr. Do not overload QArrayOps::copyAppend(), to make it
clear which one is being used.
Change-Id: If6a894841aacb84ba190fb2209246f5f61034b42
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Bring it in line with the other methods that also take a
pointer and a size.
Also use truncate() in removeAll() as that's more efficient
for the use case.
Change-Id: Ib1073b7c048ceb96fb6391b308ef8feb77896866
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
emplace() itself now handles those cases fast enough, so there
should not be a need to add special code paths for those methods.
Change-Id: I3277eb77dd54194e46f96f24de44d7785a6f860a
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Avoid duplicated code paths for GrowsForward vs
GrowsBackward. Special case emplaceing at the
beginning or end of the awrray where we can
avoid creating a temporary copy.
Change-Id: I2218ffd8d38cfa22e8faca75ebeadb79a682d3cf
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Avoid ever having to call a destructor and unify the code for
insertion at the front or at the end.
Change-Id: Ie50ae2d4a75477cfdae9d5bd4bddf268426d95b5
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QList::insert() should never need to call a destructor. This
requires that we construct the new items in the list in order
and increment the size each time we constructed a new item.
Not having a code path that potentially calls destructors should
avoid the generation of lots of additional code for those
operations. In addition, the forward and backwards code paths
are now unified and only require somewhat different setup of
some variables at the start.
This gives us strong exception safety when appending one item,
weak exception safety in all other cases (in line with std::vector).
Change-Id: I6bf88365a34ea9e55ed1236be01a65499275d150
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
When appending multiple items, we are fine with providing
weak exception safety only. This implies that we can simplify
the moveAppend() code and avoid having to potentiall
call destructors in there.
Change-Id: I31cef0e8589e28f3d3521c54db3f7910628e686f
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Types that throw in their destructors are strongly discouraged in C++,
and even the STL doesn't define what happens if such types are stored
in their containers.
Make this more explicit for Qt and disallow storing those types in our
containers. This will hopefully preempty any potential future bug
reports about us not handling such a case. It also helps simplify
some code in QList and other cases and makes it possible to explicitly
mark more methods as noexcept.
Some care needs to be taken where to add the static asserts, so that
we don't disallow forward declarations of types stored in containers.
Place the static assert into the destructor of the container where
possible or otherwise into the templated d-pointer.
Change-Id: If3aa40888f668d0f1b6c6b3ad4862b169d31280e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QExceptionSafetyPrimitives::Destructor doesn't need an additional
template argument, and the freeze() method was unused.
Some methods of the Constructor class could also be simplified.
Change-Id: Iacf35bc8634f402519a8bd875b5efea7841f9db5
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Unify it with the code in QArrayDataOps and only have one
emplace method there that handles it all.
Adjust autotests to API changes in QArrayDataOps and fix a
wrong test case (that just happened to pass by chance before).
Change-Id: Ia08cadebe2f74b82c31f856b1ff8a3d8dc400a3c
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When a foreign event loop that does not enter an alertable wait state
is running (which is also the case when a native dialog window is
modal), pipe handlers would freeze temporarily due to their APC
callbacks not being invoked.
We address this problem by moving the I/O callbacks to the Windows
thread pool, and only posting completion events to the main loop
from there. That makes the actual I/O completely independent from
any main loop, while the signal delivery works also with foreign
loops (because Qt event delivery uses Windows messages, which foreign
loops typically handle correctly).
As a nice side effect, performance (and in particular scalability)
is improved.
Several other approaches have been tried:
1) Using QWinEventNotifier was about a quarter slower and scaled much
worse. Additionally, it also required a rather egregious hack to
handle the (pathological) case of a single thread talking to both
ends of a QLocalSocket synchronously.
2) Queuing APCs from the thread pool to the main thread and also
posting wake-up events to its event loop, and handling I/O on the
main thread; this performed roughly like this solution , but scaled
half as well, and the separate wake-up path was still deemed hacky.
3) Only posting wake-up events to the main thread from the thread pool,
and still handling I/O on the main thread; this still performed
comparably to 2), and the pathological case was not handled at all.
4) Using this approach for reads and that of 3) for writes was slightly
faster with big amounts of data, but scaled slightly worse, and the
diverging implementations were deemed not desirable.
Fixes: QTBUG-64443
Change-Id: I1cd87c07db39f3b46a2683ce236d7eb67b5be549
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Have one generic method for detaching and reallocations.
Use that method throughout QList to avoid duplicated
instantiations of code paths that are rarely used.
Change-Id: I5b9add3be5f17b387e2d34028b72c8f52db68444
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Android packages the test instead of qapplication folder, thus the
BLACKLIST file for Android tests needs to be in "test" folder
instead.
Task-number: QTBUG-87666
Task-number: QTBUG-87025
Change-Id: I065072fa8a030cf9d15e057869e74a8c736c80ab
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Tests in tst_qhighdpi are crashing on Android.
Task-number: QTBUG-88505
Task-number: QTBUG-87025
Change-Id: Ie1350e06fb30d90f20c550f91555f4023eee56b6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
These tests are failing with "java.lang.UnsatisfiedLinkError: dlopen
failed: invalid ELF file" at the start, excluding them now to enable
Android testing until they're fixed later.
Task-number: QTBUG-87671
Task-number: QTBUG-87025
Change-Id: Ida7d7158fccdc31df1f9689f77fde832964d732f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
These look like leftovers (API flaws).
Construction of QFileInfo from QString (or similar) should be not
implicit, as QFileInfo construction is expensive (might hit the file
system), and this may have users overlook APIs (for instance build a
QFileInfo out of QDirIterator::next(), instead of using ::fileInfo();
using QDir::entryList instead of entryInfoList; etc.).
Leave an opt-out mechanism to ease porting.
Fix a handful of usages around qtbase, with at least a couple of them
likely to be actual "sloppy" code.
[ChangeLog][Potentially Source-Incompatible Changes][QFileInfo] Most
QFileInfo constructors are now explicit. The
QT_IMPLICIT_QFILEINFO_CONSTRUCTION macro is provided to keep old code
working.
Change-Id: Ic580e6316e67edbc840aa0c60d98c7aaabaf1af6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QChar should not be convertible from any integral type except from
char16_t, short and possibly char (since it's a direct superset).
David provided the perfect example:
if (str == 123) { ~~~ }
compiles, with 123 implicitly converted to QChar (str == "123"
was meant instead). But similarly one can construct other
scenarios where QString(123) gets accidentally used (instead of
QString::number(123)), like QString s; s += 123;.
Add a macro to revert to the implicit constructors, for backwards
compatibility.
The breaks are mostly in tests that "abuse" of integers (arithmetic,
etc.). Maybe it's time for user-defined literals for QChar/QString,
but that is left for another commit.
[ChangeLog][Potentially Source-Incompatible Changes][QChar] QChar
constructors from integral types are now by default explicit.
It is recommended to use explicit conversions, QLatin1Char,
QChar::fromUcs4 instead of implicit conversions. The old behavior
can be restored by defining the QT_IMPLICIT_QCHAR_CONSTRUCTION
macro.
Change-Id: I6175f6ab9bcf1956f6f97ab0c9d9d5aaf777296d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test authenticationCacheAfterCancel was the only one to fail
in recent COIN runs. This patch blacklists it on Ubuntu 20.04.
Task-number: QTBUG-88417
Change-Id: Idc85499da82336d291d9a90ecb941810a0e6c935
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The recent change handling missing elliptic curves introduced a problem
for '-no-ssl' configuration/build. The first version had some protection,
but it was openssl-specific and required a private feature, thus was
removed. Now the real ifdef must be with QT_NO_SSL
Fixes: QTBUG-88238
Pick-to: 5.15
Change-Id: I6fba26d6ab63850e1468e76f8b234703255a026c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Add handling of -binary flag in qt6_add_resources for generated
resource file variant.
If -binary argument is provided in OPTIONS section of
qt6_add_resources function, it will be passed to rcc as argument.
File path to output .rcc could be additionally specified by
DESTINATION argument. Extra target generated_<resource_filename>
will be added to project's 'all' set.
Implement tests for new functionality.
Fixes: QTBUG-87644
Change-Id: Id1313da499d86f82859d1757c3cfae2d84e894d4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's unnecessary, and copying QEvents is a bad practice since it's a
polymorphic class.
Change-Id: Ieb6de106084f838c5e6c8a0643c54fd3c7f4a7a8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The dot product used rows instead of columns.
Pick-to: 5.15 5.12
Fixes: QTBUG-87984
Change-Id: I922f67ed0fa9a4f88aa4e9fc6d3c09f8dda21688
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
For consistency with append and prepend we should have an overload for
insert() as well. This also enables insert() to be used with
QStringBuilder, i.e. qba.insert(2, qba2 + "abc").
Because simply adding a const QByteArray & overload causes ambiguity
with QByteArrayView we also add a const char * overload.
Add some extra test-cases. Two for QByteArrayView since it's not
directly tested anymore. One for inserting self directly.
Change-Id: Ieb43a6a7d1afbb498bc89c690908d7f0faa94687
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test function only runs on X11, and this might help with the
asynchronous nature of the client/server architecture, also for
drag'n'drop.
Change-Id: I38db9104e304e57c36f84932d13f8dfae7452883
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Instead of multiplexing all notifications into a single Qt event for
the event dispatcher, we can send 'WinEventAct' event directly for each
notifier which activated. This trick improves the performance (esp.
on a large number of events) and allows us to remove notifiers handling
from the event dispatcher completely.
As an alternative to sending Qt events, use of Windows' APC queue in
conjunction with waking up the Qt event loop from within the Windows
thread pool has been considered. However, that would lead to signal
emission asynchronous to the Qt event loop's operation, which is not
acceptable.
Thanks to Oswald Buddenhagen for the proposed idea.
[ChangeLog][QtCore][QAbstractEventDispatcher] The
{un}registerEventNotifier() member functions have been removed.
QWinEventNotifier is no longer needed to be registered in the
event dispatcher.
Change-Id: I140892fb909eaae0eabf2e07ebabcab78c43841c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
The RegisterMethodArgumentMetaType had been changed to take a QMetaType
instead of a type id in 0161f00e50.
Unfortunately, the usage of it in QSignalSpy was missed. This patch
adjusts the metacall to correctly use a QMetaType.
Moreover, use parameterMetaType instead of parameterType to benefit from
metatypes which are already resolved at compile time.
Task-number: QTBUG-88260
Fixes: QTBUG-88356
Change-Id: Id8fa46581a005d62818971ea24d8aa2e39dcd6d0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Emplace() implemented with std::rotate is just awful on my system
(Ubuntu 18.04 GCC 7.5.0). Custom code is much faster, so go for
it. Cannot really use insert() code, which is also fast, because
it doesn't forward-reference values but copies them always
Changes in performance (approximately) for emplacing 100k elements
into the middle:
Complex 7600ms -> 1700ms
Movable 7600ms -> 200ms
Task-number: QTBUG-86583
Change-Id: If883c9b8498a89e757f3806aea11f8fd3aa3c709
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reaches into the internals to avoid erasing one entry at a time from the
QHash.
Change-Id: I47079592d130d2ecd844998dfa31e633e049d4c1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There are many different ways to to call map and filter functions
in QtConcurrent. This patch adds a python script to generate
all possible combinations.
Change-Id: I61ed1758601e219c5852e8cc939c5feebb23d2f6
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
The logic in qgrayraster was ready for it except for an intermediate
format. qrasterizer.cpp and qcosmeticstroker.cpp uses a dot-16 fixed
point format, and had to be changed to handle higher coordinates on
64-bit architectures.
Fixes: QTBUG-84428
Change-Id: I85ab7a04e38bd0dbcefa9f16c16ccc84785a33cf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
gcc, clang, and MSVC all use lowercase "warning:", "error:" and
"note:". Follow that standard.
Also, include a column number; just print 1, as the Symbol doesn't
give us a column number, and searching backwards for a newline seems
overkill.
This fixes IDE integrations that parse compiler output using regular
expressions.
The test checks for moc output, but most tests were so far only
running on Linux systems. Expand this to Unix for most tests, which
then includes macOS.
Change-Id: I0a6151cc0dc50e52ca72ff8048a45213aebdb3a8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Bring QPixmapIconEngine on par with QIconLoaderEngine
when it comes to @Nx pixmap handling: Make the scale
factor a test parameter during icon lookup.
This allows storing e.g 16x16@1, 16x16@2, 16x16@3 versions
of a pixmap in the icon, and then having QIcon select
the correct one based on the target devicePixelRatio.
Extend the qiconhighdpi test to also cover QPixmapIconEngine,
via the addPixmap() API.
The corner cases of pixmap lookup can be much complicated.
QIconLoaderEngine and QPixmapIconEngine should ideally
have identical behavior in order to avoid surprises.
Change-Id: I17552cc61755bff9553c4a462e3983ac6759c13b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The former *.platform.sh entry has been replaced by more specific
entries, replacing the wildcard with only selected second levels.
Task-number: QTBUG-87925
Change-Id: Ie4ba7c66ba9aa40eafe23f02faa12f19d791cff2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fresh on the heels of our update to v37, they've released a new version.
No new languages to complicate life, fortunately.
Updated license (year range) and attribution. One test also needed an
update: Catalan's long time format now parenthesizes the zone.
Task-number: QTBUG-87925
Pick-to: 5.15
Change-Id: I54fb9b7f084b5cd019c983c1e3862dc03865a272
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The type is specific about printing, so give it a name in line with
QPageLayout and QPageSize.
As per API review comment, it's not clear why this type should not be a
regular, copyable and movable value type. It stores a list of intervals.
Give it value-type semantics, as an implicitly shared class.
Convert the parse method into a static factory function.
Add a Range type and use it instead of the semantic-free QPair.
Move QPrinter getter into QPagedPainteDevice, make it return a copy
rather than a pointer, and add a setter.
Extend test case to cover all members and more merge cases. Fix bugs
found that way.
Fixes: QTBUG-88113
Change-Id: If17ea4d410d49f16b097e88b7979db5d72add820
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The set() function sets a given byte in shared memory. Thus,
just take a char, not a QChar.
Change-Id: I6f3d148eb730573070832ddce6f63363408790cf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
MarkdownDialectGitHub now includes this feature, so *emph* is italicized
and _emph_ is underlined. This is a better fit for QTextDocument capabilities;
until now, _underlined_ markdown could be read, but would be rendered with
italics, because in CommonMark, *emphasis* and _emphasis_ are the same.
But QTextMarkdownWriter already writes underlining and italics distinctly
in this way.
[ChangeLog][QtGui][Text] By default (with MarkdownDialectGitHub), markdown
_underline_ and *italic* text styles are now distinct.
Fixes: QTBUG-84429
Change-Id: Ifc6defa4852abe831949baa4ce28bae5f1a82265
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QLatin1String::arg (and QStringView::arg) only support string-like
arguments, and QLatin1String("%1").arg(123) does *not* produce
the string "123" -- 123 gets routed through the QChar(int) constructor
instead. Fix by using QString.
Change-Id: I96371a15e1af957ef8133e30e79eb3e22b3e9d32
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This makes high-level event dispatching easier: for example we often
need to cast an event to access getters like button() and buttons().
We can so far assume that any QPointerEvent that is not a QTouchEvent
is a QSinglePointEvent; but more explicit type-checking looks safer.
Implemented in a similar way as c7f7279969.
Change-Id: I980d759e2a7538b6b30fd3bdc3be0c351ec6c246
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QStyle::styleHint returns int, and that int was simply used to
build a QChar representing the "password mask" character.
Enforce that it actually fits and then do an explicit cast.
(In general, of course, this is an API flaw; styleHint should
somehow return a QString for this use case).
Change-Id: Ifb6181b229b91cc84859cb9b9d57e21d6748c31a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure <david.faure@kdab.com>
A dependency was missing, causing qduplicatetracker_p not to be found.
Change-Id: I4076d6cf82d804354731c357bcdbfd03c3d42142
Reviewed-by: David Faure <david.faure@kdab.com>
There’s no need to convert the file name/path to QUrl,
and then back again to QString before calling qt_findAtNxFile().
Call qt_findAtNxFile first, and then convert to QUrl.
This makes sure the url-name and string-name stays
in sync.
Change-Id: I8b8939eabbdaff473945ebe31faafd408e9c4295
Pick-to: 5.15
Fixes: QTBUG-60793
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
We want to re-enable Android tests in QTQAINFRA-3867. However,
many tests are failing already preventing that from happening.
QTBUG-87025 is currently keeping track (links) to all of those
failing tests.
The current proposal is to hide those failing tests, and enable
Android test running in COIN for other tests. After, that try
to fix them one by one, and at the same time we can make sure
no more failing tests go unnoticed.
Task-number: QTBUG-87025
Change-Id: Ic1fe9fdd167cbcfd99efce9a09c69c344a36bbe4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use GrowsAt* and GrowthPosition as that is clearer.
Change-Id: I3c173797dec3620f508156efc0c51b4d2cd3e142
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
My endeavours figuring out why QList::append(elem) gives worst
performance compared to 5.15 ended up into this commit. After some
straightforward fixes, what was left is "everything is uniformly worse"
and takes more CPU cycles
Introduce emplaceBack implementation as append is quite a special case
that could be greatly simplified. This is a "straightforward" part of
the optimizations
While at it, change append(t) to use emplaceBack(t)
For workloads like:
QList<int> list;
forever {
list.append(0);
}
this gives huge improvement (roughly 30% for 10k+ elements),
movable and complex types also get a tiny speedup
Task-number: QTBUG-87330
Change-Id: I9261084e545c24e5473234220d2a3f2cd26c2b7f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Inline them into the one place they are called from
and remove duplicated code.
Change-Id: Ica88485e98625905083b16c24ee9eaf223a89ae0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Get rid of the allocation options inside the flags
field of QArrayData, they are really a completely
separate thing.
Change-Id: I823750ab9e4ca85642a0bd0e471ee79c9cde43fb
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Don't use QArrayData::GrowsForward/Backward anymore and replace
it with a simple 'bool grow'.
Change-Id: Ifddfef3ae860b11dda4c40854c71ef2aeb29df34
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
reallocate() should only ever call realloc(), and only be used to
create more space at the end of the data.
Change-Id: I2ac4dbc90d2afaa571bb620108d7984356712cb2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
The while insertion logic will need further work to make it
more efficient. Currently it does use copy construction and
assignment for internal moving instead of move operations.
Change-Id: I7ae3094daa43a44629d8fa89ab6562c2a21b6cbd
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Avoid moving data inside the array to create free
space at one end. This is a performance bottleneck,
as it required quite a lot of calculations for every
insert. Rather reallocate and grow in this case,
so we only need to do expensive work when we reallocate
the array.
Change-Id: Ifc955fbcf9967c3b66aa2600e0627aac15f0c917
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
It looks like we can drastically simplify the way QADP grows without
sacrificing much:
1. append-only use cases should have the same performance as before
2. prepend-only use cases should (with the help of other commits) get
additional performance speedup
3. mid-insertion is harder to reason about, but it is either unchanged
or benefits a bit as there's some free space at both ends now
4. mixed prepend/append cases are weird and would keep excess free
space around but this is less critical and overall less used AFAIK
Now, QList would actually start to feel like a double-ended container
instead of "it's QVector but with faster prepend". This commit should
help close the performance gap between 6.0 and 5.15 as well
As a drawback, we will most likely have more space allocated in mixed
and mid-insert cases. This needs to be checked
Task-number: QTBUG-86583
Change-Id: I7c6ede896144920fe01862b9fe789c8fdfc11f80
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added some simple benchmarks for QList insertion of 1 element
Added same tests for QVector (within the same file) for 5.15
Task-number: QTBUG-87330
Task-number: QTBUG-86583
Pick-to: 5.15
Change-Id: I19a851c79cf5ce0329266883e99ecaf2d6b3df19
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QtConcurrent::blockingMapped was not able to determine the result
type in case of passing containers that have more than one template
argument. This should be fixed by the parrent commit.
Also fixed some unrelated compiler warnings.
Change-Id: I96618dc955c5e4c3792f28f6436d6851745dc01d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This makes it feature comparable with QAction, and makes it possible
to use as a backend for QAction, and fixes a few missing alternative
keybindings in qtwidgets.
Change-Id: Iaefc630b96c4743fc5ef429dc841870ddd99fc64
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In 4e400369c0 we deprecated
normalizedPos() because we suspect it's a legacy feature that few
users will need. However Qt developers keep bringing up the continued
usage in autotests over and over. (It's IMO not wrong to keep testing
deprecated functions in autotests, but the warning keeps attracting
attention.)
Of course it will turn out that normalizedPos() has users; we just
don't know how many. One way to look at it is: why should they copy
a snippet of code to calculate it, when it costs us so little to
continue to provide this accessor.
It might also turn out that some users will complain that in Qt 5
it was passed through from the device driver (or at least from the
window system API) to the application, and perhaps the replacement will
not always work, for example if availableVirtualGeometry() ends up
wrong, or there is some strange scenario that generates events that are
out-of-bounds for the device that the event professes to come from, so
that the "normalized" coordinates also go outside the [0..1] range.
We reserve the right to put back the storage in QEventPointPrivate if
the need arises; so that's why this function is not inline.
We continue to hope that startNormalizedPos() and lastNormalizedPos()
are used even less and won't be missed much, because it would be
wasteful to store them all the time if only a few users need them.
Change-Id: I23ed78843e3f9e16133c5b6f462884a3845f91b6
Reviewed-by: David Skoland <david.skoland@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The existing logic broke down when we reentered the enumerator parsing
loop, and encountered a INCLUDE_MOC_END token in the first handleInclude
call. Fix this by restarting the loop in that case.
Amends d8a2456fbf.
Fixes: QTBUG-88125
Pick-to: 5.15
Change-Id: I87acaa986a81de53730eddc40bc7d48c15328aba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
All QFontDatabase APIs are static, use them accordingly.
Task-number: QTBUG-88114
Change-Id: I0e4a7508646037e6e2812611262eed8b6d7ad3de
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
And add a QMultiHash::unite(const QHash &) method to avoid
a copy of the data when inserting a QHash into a multi hash.
Change-Id: I864aa9d2b9b7b2c367c3c4d140a2ce2f5408ae09
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The old code was trying to convert a multi hash to a QHash. While
that worked in Qt 5 it won't compile in Qt 6 anymore.
QHashCombineCommutative also can't be used with a std::pair.
ADL won't find the correct instance with a namespaced build,
as qHash(std::pair) is defined after QHashCommutative. Fix
the code to compile and work correctly.
Change-Id: Ice2bc3ab4244e310cbbb5e0f31fc11eb14f5faf3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This ensurse that we do not do dobule notifications in setValue.
Moerover we avoid needless notifications in markDirtyAndNotifyObservers
when the value did not change. Lastly, if the value did actually change,
we pass that information along to notify, so that we do not evaluate the
eager property twice.
Fixes a test-case which errorneously relied on the old behavior, and
adds a new test which verifies that the fix works.
Change-Id: I8ec6fa2fe8611565dfc603ceab3ba5f92999b26c
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
std::function as a type is rather unfortunate for us, as its SSO buffer
makes it rather large, and we can ensure that the function is never
empty.
Considering that we do need to allocate memory for
QPropertyBindingPrivate anyway, we can get rid of the SSO buffer and
instead coalesce the allocations (similar to how std::make_shared works).
The memory looks then like
[--QPropertyBindingPrivate--][Functor]
and QPropertyBindingPrivate can get a pointer to the functor via
reinterpret_cast<std::byte>(this)+sizeof(QPropertyBindingPrivate).
To actually do anything with the functor, we do however need a "vtable"
which describes how we can call, destroy and move the functor. This is
done by creating a constexpr struct of function pointers, and storing a
pointer to it in QPropertyBindingPrivate.
As a consequence of those changes, we cannot use QESDP anymore, as we
now have to carefully deallocate the buffer we used for both the
QPropertyBindingPrivate and the functor. We introduce a custom
refcounting pointer for that. While we're at it, we make the refcount
non-atomic, as bindings do not work across threads to begin with.
Moreover, we can now make the class non-virtual, as that was only needed
to hack around limitations of QESDP in the context of exported symbols.
Change-Id: Idc5507e4c120e28df5bd5aea717fe69f15e540dc
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We'll need QContainerTraits as a class for changing properties
of our containers, so free up that name. This is not a problem,
as the namespace is new in Qt 6 and has only been used internally
so far.
Change-Id: I6d6b9d9c32b92b77e66323f1fc29b3ddd8baa98f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
