This isn't a hot codepath, there is no gain to doing this. It introduces
unnecessary bloat (see e.g.
https://www.webkit.org/blog/2826/unusual-speed-boost-size-matters/) and
complicates boosting Qt application startup in cases where argv[0] is
overwritten.
Change-Id: I55b2b98b0de6b06fe7a049de262f3e19936b73db
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Check if the item is hidden before show the item(QWidget)
Task-number: QTBUG-13522
Change-Id: I1c605d5cb8a80f340e9b7601612d3760f51cb4a7
Reviewed-by: Liang Qi <liang.qi@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Pass window flags on to ColorWidget constructor and use a window
frame + stay on top-hint for the moveChild/showAndMoveChild tests
to make the screen grabbing more reliable.
Disable animations on Windows since they seem to affect screen
grabbing as well (fading in of windows).
Task-number: QTBUG-30566
Change-Id: I8eacfc203d26674dc1b283d6643f3d434f218f26
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
This broke the build on Android with warnings-are-errors.
Change-Id: I9edb9539c4a6f7286ff46cbaa53bcfef4cf5280f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
On machines where multiple versions of VS are installed, the VS version
for the vc(x)proj generator is selected by the entries in the PATH
variable. The first VS installation that's found in PATH is used.
The former logic printed a warning if multiple VS installations were in
PATH and also fell back to the lowest version if a VS version was
registered with multiple install paths.
That's the case for VC 2012 express and prevented its usage.
Task-number: QTBUG-34357
Change-Id: Ia5c66a1aea0c40e4b7460b3aa6c7daee6673da44
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the path filtering functions assume that DEFAULT_{INC,LIB}DIRS are
newline separated lists of unquoted strings, which 8fbf959be broke.
Task-number: QTBUG-33714
Change-Id: Ie07909963ac5155a8ac79ca9254f34069925e001
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is an enabler to fallback to native font rendering when using a
bitmap font in Qt Quick.
Task-number: QTBUG-32737
Change-Id: I6d841dd5ef54d78a00f7fab9d80e9c95ff7f7b98
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
After 37ca2224ec it's an exposed
behavior change that the widgets and related paraphernalia don't exist.
Task-number: QTBUG-34100
Change-Id: Ie0ebcb8c5c5668b6c12c5447f25bfbfd893dec6c
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
But still fall back to 'com.yourcompany', just like Xcode does for the
initial launch.
Change-Id: I89afadefafc254a0014aca197741d42a0199943e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is necessary to avoid hidden dependencies for int gethostname(char *name,
size_t namelen);
This was revelead while backporting the class to Qt 4 for QtSerialPort.
Change-Id: I1c477d295eeae90b3136fc6aae5d45982d5b1d73
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The new way deployment is done can be confusing to users of
Qt 5.1 and Necessitas, so we need to mention that it has changed
and point them to the documentation.
Change-Id: I8e9890699f57d6000370c384c52fcb093a917bef
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
When building under Xcode we can limit the object files search to the
current SDK and debug/release configuration.
Change-Id: Ic405f13f46a594e3ed20d82ca6b84e7e67edebfc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
On Mac, Qt::SizeAllCursor showed a spreadsheet cell selection cursor.
It has been changed to look like it looks in the Qt Documentation.
Task-number: QTBUG-27577
Change-Id: I2d50ab0d813137366b56cb30b8784ecf70392d4e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
The paths may be relative to a sysroot or osx SDK. The existing logic
assumed that we always get fully resolved absolute paths from qmake.
However, qmake populates and uses the -isysroot option separately.
Task-number: QTBUG-32308
Change-Id: Ia23600cdc047d0844bfec32dd4feae3a2b5c95c0
Reviewed-by: James Turner <james.turner@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
on the way, this significantly simplifies the code.
Change-Id: I24f0a517e62cc4b913ffef5cab096e721653c013
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A standard paths implementation for iOS. The APIs used on iOS require
that the source file be "Objective-C++" (with a .MM extension), as
there are no APIs available in C++ for this. The implementation
complies with the latest documentation on standard paths.
Change-Id: I349d3c5d4ddb6fb1297a45dc9ae26b56ac528abb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Instead of trying to hook into various places where we might be in a
situation where the root event loop should exit, and then enabling the
runloop-observer, we always keep the observer active, and then do the
relevant checks whenever the run-loop exits.
The reason for checking if the event loop is running is that iOS will
enter and exit the root runloop as part of normal operation, eg due to
flicking a scroll view and switching the runloop mode, so we need to
ensure that we're actually supposed to exit the root event loop.
Change-Id: I9b84b47ee45e0c9e2b1d2ebb5a432ea92700b324
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
I had the -fPIE option in my personalised "linux-icc-optimised" spec,
so I never noticed it was missing in the standard one.
I have no idea when -rpath-link is necessary. It isn't for me.
Task-number: QTBUG-34425
Change-Id: I54b2fb8cda10b9197d81b5630b1d29b8c338d96a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If QMAKE_INFO_PLIST is set, check if the file it
points to is located inside the project source dir
rather than the build dir.
Change-Id: I6fb176349dae8e841b5e2dfdb9f9cb87f51a1e76
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Make already the creation of the generated cpp file depend on the
creation of the generated h file, which transitively ensures that
the cpp won't be compiled before the h is there.
Change-Id: Idd3aec8d72dac341e835a3d1ef8f2986dbc1ab9f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
QIcon::isNull() only checks if it has a valid d pointer and not if it
actually contains any image data. The result is that the QImage create
from the icon would be invalid, and later cause an exception to be
thrown. To avoid this we should check the QImage as well.
Task-number: QTBUG-34416
Change-Id: I9dd0a2387d73bfc2c27ceb9df247ddc186dd659f
Reviewed-by: BogDan Vatra <bogdan@kde.org>
In some cases we where not releasing the local references and since we
no longer disconnect from the VM on each call, the number of local refs.
would accumulating until it hit the hard-limit of 512.
Change-Id: I6826620e4cb61a37af26d276667489e876080076
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
It happens that we don't get a focus inn event for top level windows
when focus goes from a window mapped. But we do get a _NET_ACTIVE_WINDOW
event.
Task-number: QTBUG-34426
Change-Id: Id1d9eb708a968e0e8934e56dec19abe2dd203bc7
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Conceptually a Qt for iOS SDK or source build should support building
for both simulator and device, based on the same qmake binary and Qt
libraries. Qt Creator or Xcode should then be able to use the same Qt
version while still building for a single target at a time. This
applies to user libraries as well, which shouldn't require switching
to a different Qt when changing target platform from simulator to
device.
We achieve this by using Qt's exclusive_build feature, where we build
for the two targets in parallel, and then teach Xcode how to choose
the right library dynamically at build time.
Change-Id: I06d60e120d986085fb8686ced98f22f7047c4f23
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
This patch makes it so even sub processes of services are also
detected to be running in the context of a service. With the previous
code it would only detect that the current process is a service
and not the sub processes.
This fix makes sure we detect properly if the current process
is running in the context of a service. This is important to
detect properly the proxy configuration of the current user.
Change-Id: I110dee62597aec3f8e2f6925166a428f72d14fd0
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
It is now configurable if test results are stored in xml, plain text
or in both formats. Default is xml, like it was,
Max runtime is also configurable so that we can reduce the CI round.
With default setting it takes more than eight hours within current
CI node.
The latest test result dir is linked as latest.
Change-Id: I5d27cefe17e4f86648132db7ec104711d993c3de
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
By default debug, trace is disabled, so this can be marked as unlikely.
Change-Id: I221a688c953c1ff1fdfda65d2d99457785d3ff47
Reviewed-by: hjk <hjk121@nokiamail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In positionInLigature() we were mixing indexes into the script item with
indexes into the entire string. The getClusterLength() function would expect
an attributes array for the current script item and it thus needs to be
adjusted by si->position. In addition, when looking for the next grapheme
boundary, we were comparing pos (which indexed the string) with end (which
indexed the script item). This has also now been fixed by adjusting for
si->position as well.
Task-number: QTBUG-30123
Change-Id: Id02e2eddcc5b7888eacb34bd1e39cc6911880ca1
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Earliest occurrence is to my knowledge in 12.04.
It is still unclear how to act on those messages
Change-Id: I7da48281c6bec973448a1d4cd800d445a80695a2
Reviewed-by: Gatis Paeglis <gatis.paeglis@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This will allow applications to make sure Qt has the same state as the
window system at any given point. The use of this function is
discouraged but it is very useful for auto tests.
Change-Id: I691bff365fc391e9d7213f2607008983505bb774
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Makes it possible to join two separate builds, and opens up for using
exclusive builds to do this.
Change-Id: I87ccbdd55511fdfbef3fe8b581f40525ebf077ed
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
<QtConcurrentRun>, <QtConcurrentMap>, and <QtConcurrentFilter> are not
official headers. Developers should use <QtConcurrent> instead.
As a side-effect, this patch also stops the function documentation from
being duplicated (one copy in the QtConcurrent namespace page, one copy
in the \headerfile pages)
(For some reason, \brief doesn't work on standalone pages like these)
Change-Id: I9482f014acf52ba734a3fa597cdcc5931fcd7ecf
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
- Fix location of NSMenu when no NSView is given.
- Fix shortcut when given in text with tab.
Change-Id: Iec21cf3d12084db1e70c1a8779d5482c78285796
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
With OS X 10.9 font decoding appears to happen lazily, this means we
have
to ensure the data we provide CG is kept alive until it dereferences it
itself.
Task-number: QTBUG-34332
Change-Id: I8fc38fafba746b062c4ad16314b0a410fd0b668d
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>
Manage and correctly set the z-order of a foreign created mmrenderer window by
QtMultimedia
Task-number: QTBUG-33816
Change-Id: I46273b945bf10991462fa72eb1ec8d00b0648988
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Previously, the full path to the qmake project file was specified as the
key for projGuids when inserting the project GUID into this hash table.
The only place that items are inserted into projGuids is in
VcprojGenerator::collectDependencies at:
projGuids.insert(val.first, newDep->target);
In this case, val.first contains the full path for the given project being
processed at this point. (e.g.: c:\testproject\testproject.pro)
Further in sln/vcproj generation, projGuids is queried with the contents
of <TARGET>.depends so that users may specify another qmake project as a
dependency for a given target.
This occurs in two places, in two ways:
1) In VcprojGenerator::collectDependencies() at:
QString depend = dep.toQString();
if (!projGuids[depend].isEmpty()) {
...
In this case QString depend contains whatever is put into <TARGET>.depends.
Typically this is the plain name of the project you depend on.
(e.g.: testproj)
2) In VcprojGenerator::writeSubDirs(QTextStream &t) by proxy of
extraSubdirs which is a QStringList of the project depends should the
mapping in case 1 fail.
This case works much like the above case, attempting to use each
QString entry of the extraSubdirs list as a key in projGuids.
If either of the above two attempts are successful, the msvc solution is
configured in a way that creates a project dependency, ensuring correct
compilation order and other related behavior.
The fix here stores the target project (e.g.: testproject) as opposed to the
full project path, as that is what is expected in the <TARGET>.depends
statements contained in the qmake project.
Change-Id: Iee05661a64d7a3e4467c5ade48d801fbbfe981b5
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Chris Gilbert <cgilbert@knaldtech.com>
