We don't really know why, but using the ctest
--force-new-ctest-process flag stops the test from hanging.
Also re-enable the test.
Task-number: QTBUG-78449
Task-number: QTBUG-81365
Change-Id: I33094696dfe3f610dc257089074b1c2a9926f651
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Tests like tst_qmake need the build environment to be able to build
apps / libraries. This is mostly needed for MSVC.
Set the TESTS_ENV_PREFIX env var to point to the proper prefix.bat
(host or target) and use that when running ctest.
Task-number: QTBUG-85240
Task-number: QTBUG-78449
Task-number: QTBUG-81365
Change-Id: I6fa68714202ac7fc703973fc772e03b84790a043
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Before this change, tests were never built for cross-compiling
configurations.
Add instructions that build and run tests for qemu configurations.
This required a bit of abstraction / indirection to find out what's
the path to the correct qt-cmake call, as well as prepending the
correct env prefix to each call (either the host one or the target
one).
Also, the QEMU configuration requires a few environment variables
to pick up the correct runtime linker and which qpa plugin to use
for running tests.
Finally, make sure the tests are not built and run if the DisableTests
feature is set in the configuration.
Task-number: QTBUG-84423
Change-Id: I0cec28c801a657e67cfa48f3c61cfe487109946b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If we configure qtbase with Ninja Multi-Config, we should use the same
generator when building other repositories as well, to ensure that
all repositories have the same set of configurations (debug and
release). To do that, the Coin instructions will call the
qt-cmake-private wrapper which records the generator used.
For standalone tests continue to use qt-cmake, so that only a single
configuration is built (no need to build tests in both debug and
release mode). The configuration built will be the first one from
the initial list with which qtbase was configured (usually
RelWithDebiInfo). This is ensured by the
QtBuildInternalsExtraConfig.cmake file.
Task-number: QTBUG-80900
Change-Id: I701b2f652a22d51e640a6fdf19c3b2d2dfb34d5c
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
Calling cmake --install . only installs a single configuration.
To install both debug and release artifacts, the install
invocation needs to be done for each configuration.
To keep the Coin instruction code simpler, delegate the looping
over configurations to a custom CMake script, and use it in the
Coin instructions.
Replace all cmake --install calls in the instructions with calls
to either call_host_install.yaml or call_target_install.yaml.
The path to the script depends on whether we are building
qtbase or another module. In the former case the script should
be called from the build dir, otherwise from the install dir.
The other distinction is whether the host or target env prefix
needs to be added.
Task-number: QTBUG-80900
Change-Id: Ied4bf739e2b1a2307f22fc79c1cfad746c8cbc44
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Don't do any of the MSVC-related instructions when targeting MinGW.
Make sure to pass gcc and g++ as compilers when targeting MinGW.
Don't use any ENV_PREFIX that sets up the MSVC environment.
Task-number: QTBUG-75578
Change-Id: Icf5c39b58391d473d914fe8dc17d062812b07df1
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
Using an environment prefix wrapper shell script that sources the SDK's
env setup. The script also ensure that we don't loose cmake on the way.
Change-Id: I9d08bc58f0efaf688512ab26a7ddb800309a5015
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When building for qemu, the target "os" is still set to Linux, so try to
detect qemu by looking at the version field.
Change-Id: I7c66cdb29a47a44d5b8a394977136139fc646155
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The friendly named values should be used rather than the
all caps names.
Change-Id: I44dbe8c25d405424c5cd2c9527b6e884511ac269
Reviewed-by: Toni Saario <toni.saario@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
To allow seeing the exact compiler flags when build in Coin.
We do the same for qmake builds.
Change-Id: I8c43f35b95d722d914aaeaa8860720a3a0578737
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Due to a bug in upstream CMake regarding relative paths being encoded
into the build.ninja file when performing in source builds, we need to
build the tests in a standalone directory outside of the source
directory.
Failing to do so will cause the source directory for the test to be
incorrect which can cause tests to fails and never read the
BLACKLIST.txt file. See the mentioned issue for details.
Task-number: QTBUG-82820
Change-Id: Ie5c178a92369d6b9decff625bd9641e53088a9fa
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change-Id: Id274bf821f424077e7259ed42433f2ef88153c36
Reviewed-by: Toni Saario <toni.saario@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Make sure to split the command arguments after variable substitution
like it is done in call_cmake.yaml.
Amends d445112cc0
Change-Id: Id23fcfa5b58c33e05495413fb10349fbcff1bfac
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This allows doing debug_and_release builds with Ninja on all
platforms.
The "Ninja Multi-Config generator" is available starting with CMake
3.17.
Desired configurations can be set via CMAKE_CONFIGURATION_TYPES.
Possible values: "Release, Debug, RelWithDebInfo, MinRelSize".
For example -DCMAKE_CONFIGURATION_TYPES="Release;Debug".
The first configuration is the 'default' configuration which is
built when calling ninja with no arguments.
To build all targets of a certain configuration use "ninja all:Release"
or "ninja all:Debug".
To build all targets in all configurations use "ninja all:all".
Note that the first configuration influences which configuration of
tools will be used when building the libraries for all configurations.
In simple terms, when configured with
-DCMAKE_CONFIGURATION_TYPES="Release;Debug" the release version of moc
is used by AUTOMOC.
When configured with -DCMAKE_CONFIGURATION_TYPES="Debug;Release"
the debug version of moc is used by AUTOMOC.
Framework builds and Ninja Multi-Config don't currently work together
due to multiple bugs in CMake, which ends up generating an invalid ninja
file with duplicate rules. There are also issues with placement of the
debug artifacts.
This will be handled in a follow up patch after CMake is fixed.
Task-number: QTBUG-76899
Change-Id: If224adc0b71b7d1d6606738101536146aa866cd7
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Previously repo/tests/CMakeLists.txt was a standalone project on which
CMake could be called. This was useful for Coin to be able to build
and package only tests, but was a bit troublesome because that means
having to specify the usual boilerplate like minimum CMake version,
which packages to find in every tests.pro project.
Instead of having a separate standalone project, modify the top level
project and associated CMake code to allow passing a special
QT_BUILD_STANDALONE_TESTS variable, which causes the top level project
to build only tests, and find Qt in the previously installed qt
location.
This also means that when building a repo, we generate a
${repo_name}TestsConfig.cmake file which does find_package on all the
modules that have been built as part of that repo. So that when
standalone tests bare built for that repo, the modules are
automatically found.
qt_set_up_standalone_tests_build() is modified to be a no-op because
it is not needed anymore. Its usage should be removed from all the
other repos, and then removed from qtbase.
Non-adjusted tests/CMakeLists.txt projects in other repositories
should still be buildable with the current code, until they are updated
to the new format.
Adjust the Coin build instructions to build the standalone tests in a
separate directory.
Adjust pro2cmake to generate new structure for the tests/tests.pro
projects.
Adjust the qtbase tests project.
Fixes: QTBUG-79239
Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Equals_value check that if the property is same as given value.
Equals_property compares properties in this case the OS of target and host.
Change-Id: Ica42f0f99562911a97d2f6bd02bd8a6420c980ac
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change-Id: I3906a08f5e0cce9abeeafbb67a83d31fbf67c703
Reviewed-by: Toni Saario <toni.saario@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There are things that could be shared around all Qt submodules. In particular
compiler specific configuration should not be repeated over and over.
The new file can be included directly from all modules that uses QtBase.
In longer term one would have a separate repository for such instructions as
most of them are not QtBase specific.
Change-Id: I0590b2a0c78b73e1b9dbb27cc1da6568cbe56563
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We do not need to print the whole cmake configuration anymore.
Change-Id: I429e06f65258d0be0cf8b7c90e81c0593718e48c
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Qt CMake Build Bot
We should check if configureArgs has "-DBUILD_SHARED_LIBS=OFF", that means
"contains_value" not "in_values".
Change-Id: I6c0c3ac695fa439c68f3027e70adc389f6fb27c1
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
MODULE_ARTIFACTS_RELATIVE_STORAGE_PATH was pointing to a build
artifact, instead of a path to a successful item.
Change-Id: I01490e63e70beae2f613cda5451a9e2ddb5451fa
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We do not run the test in such configuration. In theory the build
should success (it doesn't for now) but it creates a lot of data.
So the coverage gain vs cost ratio is not great.
This workaround aims to unblock cmake builds.
Change-Id: Icd730d88bf800ee2e7764704a92238ec147d47f9
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Liang Qi <liang.qi@qt.io>
We do not need or should to define these variables in the product
configuration file. It should be enough to just have the compiler
name.
Change-Id: I797958a2c35641f1b79e4e74f3feb49312f8b9c4
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The resulting test artifacts are way to huge to upload.
Change-Id: I6df1f1c4bdb0fe2cfb7f7baed8999a1ee24b879e
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The module yaml file provides the instruction for creating and upload
the test artifacts, it might as well provide the instruction for
downloading it. Coin sets the corresponding environment variable for the
storage path now.
Change-Id: I4aabe60e28c0c1a6d5934b3b7b797835a793a7fe
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
As an initial way this allows running tests. Coin does not yet collect
the results and the logic for re-running is inside ctest.
Change-Id: Ieab619d5f8f4ebdd8cd1293489db36d0bbd7c74a
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
We don't need the full cmake invocation as when configuring, instead we
can use the qt-cmake wrapper script that uses the generated toolchain
file.
Change-Id: Ie0d554fbf8543d950112108d6a3f8a7c3a58a6a6
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Remove dummy test instructions that don't work right now and cause
failures.
Change-Id: I30195fe605419a8eb462e8315f71718dd86df412
Reviewed-by: Liang Qi <liang.qi@qt.io>
That way we can simplify product level configuration.
Change-Id: I6825a10e4652dc7a730d23aaa7d4e7db9c079e50
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Now execute command can directly specified how the arguments should
be divided. The default option doesn't work well for CONFIGURE_ARGS,
because we want to pass it's result as a separate subprocess
arguments.
Change-Id: I6b7adb04164f5568d9ad2f45e3334d7a7a49bc79
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
By using the new environment variable for the generator selection
introduced in 3.15, we can later select the visual studio generator once
the qtbase build is fixed. This will simplify the VS selection code in
this file and allow getting rid of the ENV_PREFIX and .bat file.
Change-Id: I9f76b5714450ffa60b496aef0ce5a0c21e843bef
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This is just a small step towards the situation where we build the tests
during the module build phase and later extract and merely run them.
The general steps we need are:
* build tests separately, which includes the cmake test plan
* let coin archive the tests (build) directory
* in the test VM unpack everything
* run ctest on the test plan that was part of the tests archive
This patch implements the first two steps.
Change-Id: Ifb8321015d0d18ad20e8cf20bb8b746030202daf
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Coin implicitly was exporting some variables if ICC was used.
This patch is just a first step to enable ICC in CI. To make
it really working one would need to fix the QtBase code and
enable ICC in qt5 repository.
Change-Id: I2fca19ff10d7390fa013f511f167c0c1c2fba427
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Since 3.15, not only --build can call the low-level build tool,
--install can also be used to run the installation. There's also an
environment variable that can be used to control the backend at cmake
time, but that may only be useful later.
Change-Id: I8c1ee48f946e110af3e824cf8980bbacbb94db99
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Qt CMake Build Bot
On Windows, we have a problem with locating MSVC. Depending on system
version it can be installed in different directories. Currently
we have a custom logic to handle it, but in theory we could just use
"ProgramFiles(x86)" to abstract it.
Change-Id: Ia94a41d9ef6229de712606f9a9d3d61a0abeb24f
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
As now the configuration syntax supports enable_if, we can get rid
of double negations.
Change-Id: I5b8b695d4f7a72cd1a836b9b427096fb4e3b85a7
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The current CI magically add prefix to every executed command if
target compiler is MSVC. The prefix just calls vcvarsall.bat.
The script has to be called for every command, because of the CI
agent runs every command as a subprocess. It means that script
sourced environment is not passed to subsequent commands,
therefore all changes are lost.
The prefix, as a concept, has known performance issues (COIN-253),
so in long term it would be nice to move to another solution.
CustomModule doesn't support prefix. Therefore the proposed approach
moves the ugliness from CI code to the yaml configuration file.
It has two advantages; nothing needs to be implemented on the CI
level and hopefully someone in future will clean it up as
the problem is more visible and publicly fixable.
Change-Id: Ice3cff89e3a59b2a57e675b7892fde0d04433ba8
Reviewed-by: Liang Qi <liang.qi@qt.io>
That allows us to skip all the madness of choosing between
make/nmake/jom.
In addition it is actually faster to build with ninja, then other
tools.
Change-Id: I31049a292495800606cede6f15011d97af7c3e41
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Qt CMake Build Bot
These arguments are specific to the build and changes to them are _not_
affecting configuration.
Change-Id: I8c46a0dbea8978f13e78c5cb8f41987f4fde09c8
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Liang Qi <liang.qi@qt.io>
Signing package may take more then 10s while calling echo really
should take less then 60s ;-)
Change-Id: I1798981492d1467bb8b20099ea705b08ea9b0914
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The number of CPUs is set implicitly by MAKEFLAGS and NIJAFLAGS.
Change-Id: Ie9296f9a7872253c696536d7b3d6235c7881d42b
Reviewed-by: Liang Qi <liang.qi@qt.io>
That way we can update instructions without waiting for
Coin update.
The patch contains invalid test instructions, but as
cmake port is not yet able to run tests it should not
matter.
Change-Id: I86088aefec49ded60af00243b0b8c60c8f16147a
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
