Rename getter QHeaderView::firstSectionMovable()
to QHeaderView::isFirstSectionMovable(), turn into a property
and fix \since.
Change-Id: Ica2ca43d22f3fd78ff63178ba75014807fc9b823
Reviewed-by: David Faure <david.faure@kdab.com>
The code that updates a section size must also update length,
otherwise saveState can end up saving inconsistent state, and
restoreState() goes to an early-return, not doing anything.
The actual bug was fixed meanwhile because _q_sectionsChanged is called
again, which recalculates length. I still see this only as a safety
measure, every other code path that changes section sizes updates length
right away.
Change-Id: I6cc16261692d93b3640afafef600a5bdff8dca0c
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Return value of qWaitForWindowActive should be checked as it is marked
Q_REQUIRED_RESULT.
One of the calls was failing, so remove it and wait for the next condition
instead.
Amends d0dffdfc01.
Change-Id: I0c0b2bf11504730477158a5e1fb3018f359a6fb9
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Before there was a risk looking up e.g index -1 if there
were no visible sections in layoutAboutToChange.
Change-Id: Ic911e4292e8e8c4892fef1c0f34cf7dccaad2bac
Task-number: QTBUG-65478
Reviewed-by: David Faure <david.faure@kdab.com>
Do not clear the settings of QHeaderView during layoutChange when the
model is empty and the section count did not change. This will not work
when a section is moved or a section is replaced with a new one during
layoutChange. But since layoutChanged is also called on sorting, this
patch ensures that the settings are not cleared in this case.
This restores the behavior to the same as before 5.9.4.
Task-number: QTBUG-66444
Task-number: QTBUG-65478
Change-Id: I39989cfd45b42e58f49d18ec014d3a941cadb6c9
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
During (re)storing the sections within layoutChanged handling, the
hidden section size was not properly stored which lead to a section
size of 0 when the section was unhided afterwards.
Task-number: QTBUG-66413
Task-number: QTBUG-65478
Change-Id: I0b714c7e0530a1eae82b3bb0e0dc80ed576522d0
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
When the focus is lost on an editor due to the application no longer
being the active one then we have to ensure the parent view is going to
get the focus when it is returned. Since the editor does not have focus
when this check is done we need to manually account for this case by
setting it on the parent view as if it would if the editor did have
focus.
Task-number: QTBUG-62253
Change-Id: I14ac347e9e3a2bfaa8715a45811b17c1c7cf15f8
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QHeaderView is doing a complete rebuild of the sections when the layout
changed because everything could have happened. But since layoutChanged
is also called during e.g. sorting, the old data must be restored when
possible.
Task-number: QTBUG-65478
Change-Id: I088d4d843cad362b97df6dc5e0dcb9819b13547f
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QAbstractItemModel::dataChanged() gained an optional role parameter
with Qt5 which was not filled within QListWidgetItem/QStandardItem
setData() functions
Task-number: QTBUG-55903
Task-number: QTBUG-63766
Change-Id: I4da9346ef8401cc8633dc4b2ea7d00451d1e3942
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
By ensuring that the current index follows the focus of an index widget,
we can ensure that moving the cursor will happen in the way that is
expected from the focused widget.
Task-number: QTBUG-27793
Change-Id: Ia36891a94ce41c7d12fba678de23a6f3b69374ae
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
The Embedded Android build (Boot to Qt Android injection) is defined by
having both Q_OS_ANDROID and Q_OS_ANDROID_EMBEDDED flags defined,
as well as having Qt config android-embedded.
This commit enables the possibility to build embedded Android builds.
(i.e. Qt build for Android baselayer only, without JNI)
Change-Id: I8406e959fdf1c8d9efebbbe53f1a391fa25f336a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
QItemDelegate::doLayout added a margin after the checkbox which is not
done within QCommonStylePrivate::viewItemLayout. This created a small
but visual difference between using QItemDelegate or QStyledItemDelegate.
The additional margin was removed from viewItemLayout somehwere between
4.4 and 4.5 so it was intentional.
Change-Id: I2fc3f287fe8b181355edeebec9626c49d85fe74d
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
QHeaderView::resizeSection() did not check if the given section size is
inside the min/max property bounds.
Also on calling setMin/MaximumSectionSize() the current section sizes
were not checked if they are inside the new given bounds.
This is a small behavior change when a user is setting the section size
via resizeSection() without respecting the min/maxSectionSizes.
Task-number: QTBUG-64173
Change-Id: Ia9c9eebf058d60c776ab5f8f8336642013ec553f
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
QTreeWidget::visualItemRect() returned an invalid QRect when a column
was moved and then hidden (or the other way round). The reason was that
the logical index returned by QHeaderView::logicalIndexAt() was again
passed to QHeaderView::logicalIndex() to create the QModelIndexes needed
for QTreeView::visualRect()
Task-number: QTBUG-28733
Change-Id: I8676f21bcab8c05c2260b85d483902f18cbf3e24
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
QTreeView makes columns movable except for the first one
(since Qt 5.0, see commit e0fc088c0c). This is indeed best
for actual trees, but not when using QTreeView as a flat
multi-column list (with no "root decoration"). Then it should
be possible to move the first column.
[ChangeLog][QtWidgets][QHeaderView] Flat treeviews can now allow
the user to move the first column (like in Qt 4.x) using the new
method QHeaderView::setFirstSectionMovable().
Change-Id: I6b5025e40850bf5c4c373124ee81f657f3f09d29
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
QHeaderViewPrivate reimplemented _q_layoutChanged() to handle changes
of rows/columns via layoutChanged/layoutAboutToBeChanged. This worked
fine for Qt4 but since Qt5 only the special signals rowsAboutToBeMoved/
rowsMoved are used for this (8021e2d5e7).
With this change, QAbstractItemViewPrivate::_q_rows/columnsMoved() is
calling the virtual function _q_layoutChanged(). This resulted in a
wrong call of QHP::_q_layoutChanged() for a horizontal header when
a row changed and for a vertical header during a column change. In the
end this can lead to an unhide of hidden sections.
Task-number: QTBUG-54610
Change-Id: Ide4bfc5b24a97746fd1e5af82d3ba08257149157
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QHeaderViewPrivate::_q_layoutChanged() was not called when used in a
QTreeView because it was explicitly disconnected in setModel().
The disconnect was added sometime prio to Qt 4.3, but there the signal
was connected to the doItemsLayout() slot. This was correct since
QTreeView::doItemsLayout() is calling header->doItemsLayout().
In Qt 4.3.0 _q_layoutChanged() was introduced and the disconnect was
adjusted. But since _q_layoutChanged() is doing much more than
doItemsLayout() (e.g. restoring hidden sections), functionality was
lost. The problem was already observed for Qt 4.6 (QTBUG-18196) but
only partially fixed.
Task-number: QTBUG-41124
Task-number: QTBUG-54610
Change-Id: Id13a9930d0163812e12a0287016bab9c3aa02068
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
QFontMetrics(F)::width() has been deprecated and is replaced by
horizontalAdvance(). This updates all usage of it in tests and
documentation.
It is worth noting that many or most of the usages of
QFontMetrics::width() probably intended to use boundingRect().width(),
but since it currently works, I have not looked into that, just
replaced the function name mechanically.
Change-Id: Iec382e5bad0b50f37a6cfff841bfb46ed4d4555f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use being()/end() instead.
These were the last remaining uses of QRegion::rects() within qtbase.
Change-Id: I264beb6f660968f40eecbbee2260341fca94ddb5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QAbstractItemDelegatePrivate::textForRole() was formatting date and
time separately, then gluing the parts back together with space.
QLocale can do that just fine itself (it has a toString() overload
that handles a QDateTime) and might even (some day) do it better. To
my mild surprise, this proved sufficient to fix a problem with
date-time display in tool-tips, when the date-time includes a zone.
Extracted the date-time part of an existing selftest into a test of
its own and extended it to test times of each spec-type; verified that
the non-local spec cases of this all failed before this fix.
Task-number: QTBUG-61069
Change-Id: I6d6be0c27be9a557d8afc3ced200a10b2aaff816
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QTreeWidgetItem::insertChildren should behave like a more-optimized
QTreeWidgetItem::insertChild. Unlike the latter, the former lacks
out-of-bounds checks, resulting in successful insertions even
when using an invalid index (say, bigger than the row/column count).
Reintroduce some sanity checks instead. This allows to fix a "fixme"
left in the autotest.
[ChangeLog][QtWidgets][QTreeWidgetItem] QTreeWidgetItem::insertChildren
now ignores insertions happening at invalid indices, for
consistency with QTreeWidgetItem::insertChild.
Change-Id: I1532597768cc6aff96a6e8f356bc6075b582801d
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
A layoutChange indicates that anything can have moved to anywhere else,
including as a result purely of new items being added. It can also
indicate that items are removed.
The old code here incorrectly assumed that the section count remained
constant over this operation by setting the size of the oldSectionHidden
QBitArray - whose size is the size before the layoutChange operation -
and then calling setBit with model rows numbered after the layoutChange
operation. As the two are not necessarily the same dimensions, this can
result in asserts from the setBit call.
Simplify the handling of layoutChanged entirely by clearing section
information, and using the QPersistentIndexes which indicate hidden
state to restore that state after re-population.
Task-number: QTBUG-53221
Change-Id: I3cda13e86b51b3029b37b647a48748fb604db252
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Since the first item in a treeview might be hidden, start from the
first visible item in the view when starting or wrapping round
during a keyboard search.
Task-number: QTBUG-63869
Change-Id: I202bea567c6d4484c3ffaf8a5f9af8ea2e13708d
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
When calling QTreeView::hideColumn() the row heights are not
recalculated. This can lead to rows which are unnecessarily high due to
hidden columns may contain large (e.g. multiline) content. The same
applies to showColumn() - there the row might be to small.
Hiding columns directly via QTreeView::header()->hideSection() is not
covered by this patch since QHeaderView has no way to inform about
newly shown/hidden sections.
Task-number: QTBUG-8376
Change-Id: I20b1198e56e403ab8cf649af76e5e2280821dd68
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Resizing a QTreeeView section with double click or
resizeColumnToContents() does not respect the maximumSectionSize when
the resize mode is Interactive or Fixed. Since the documentation of
maximumSectionSize states that it should honor this property for those
cases either the documentation or implementation is incorrect.
This patch fixes the latter.
Task-number: QTBUG-64036
Change-Id: Ic14c8e444d50b9c50a117efed19d0bca7ec1cf82
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
ultrix and reliant have not seen a release since 1995. dgux not since
2001. bsdi not since 2003. irix not since 2006. osf not since 2010.
dynix... unclear, but no later than 2002. symbian needs no mention.
All considered obsolete, all gone.
sco and unixware are effectively obsolete. Remove them until someone
expresses a real need.
Change-Id: Ia3d9d370016adce9213ae5ad0ef965ef8de2a3ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... by moving them in QTestPrivate namespace (qtesthelpers_p.h). This
header file is a convenient staging area for helper APIs, eventually
some could be moved to public QTest API.
This header file utilizes the same pattern as other qtestlib header
files - wrapping functions with QT_${LIBNAME}_LIB to automatically
enable certain APIs based on what is in the projects dependencies,
e.g. QT += widgets.
Change-Id: Ic0266429939c1f3788912ad8b84fc6e0d5edd68b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Make the function brace policy consistent.
Change-Id: Iaf1f05a63958f19927e9b1953da06f99a4eba644
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
tst_noqteventloop.cpp 'event' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'canFetchMore' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'fetchMore' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'hasChildren' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'rowCount' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'columnCount' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'index' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'parent' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'data' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'begin' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'end' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'updateState' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'drawPixmap' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'type' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
Change-Id: I2a0c5da15994619383c1f90fee311927e58d7af0
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
The qWaitFor functions themselves can not trigger a test failure, as that
will not result in the test function exiting early, so every single call
to qWaitFor needs to be wrapped in a QVERIFY.
Change-Id: Id15a1549f31d06cdbf788e1d84ea431c28636ec8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This autotest is blacklisted as it is deemed flaky.
Task-number: QTBUG-63262
Change-Id: I216985e81d1c1cb3528fd8a005be48cad2a31ab7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
