This extends the QLinkedList auto test. This is copy paste
with small edits from the QList auto test.
Change-Id: I5bce7ee304998d1c7258f11b2f31a7fb87706936
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add convenience methods for fromMSecsSinceEpoch() and
fromTime_t() to enable direct creation of other time specs
than LocalTime without the overhead of unncessary conversions.
For example instead of:
QDateTime dt = fromMSecsSinceEpoch(12345).toUtc();
the following saves two conversions:
QDateTime dt = fromMSecsSinceEpoch(12345, Qt:UTC);
This will improve the performance of the new QTimeZone class.
[ChangeLog][QtCore][QDateTime] Added convenience methods for
fromMSecsSinceEpoch() and fromTime_t() to take time spec to be used in
returned datetime.
Change-Id: I133635bfe3d35ee496a287257e13b2d600225a38
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
The Qt::OffsetFromUtc TimeSpec was made public in Qt 4.4 but the access
methods were never made public in the apidox effectively meaning the
feature was never used. The implementation was also incomplete and
inconsistent.
This change cleans up the implementation and exports new public API for
using the TimeSpec using new method names consistent with the new
QTimeZone support.
This change increases the QDataStream Version number for Qt 5.2 to 15.
The behavior of one constructor has changed slightly to be consistent
with the rest of the feature, but this behavior was never documented.
[ChangeLog][QtCore][QDateTime] Fully implement support for Qt::TimeSpec
of Qt::OffsetFromUTC, added new methods for offsetFromUTC(),
toTimeSpec(), and toOffsetFromUTC().
Task-number: QTBUG-26161
Task-number: QTBUG-29666
Change-Id: If3cc7fc9778ca2b831644408ae749448d5975a3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Maliit upstream has its own IC which is more advanced than this one, as well as
being supported.
Change-Id: I4b820fc7f39468e53c113699c4c43c75d490f65b
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Jan Arne Petersen <jan.petersen@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Pekka Vuorela <pvuorela@iki.fi>
The application state is tied to the QtActivity lifecycle.
Mapping of states between Android and Qt is as follows:
onResume --> ApplicationActive
onPause --> ApplicationInactive
onStop --> ApplicationSuspended
Change-Id: Iefef08d6c7a7fde28fba1f4886882458cda6a0c0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
The test was re-using a main window and menu bars for all tests,
clearing and repopulating them. Rewrite the code to be able to
use menu bars and windows on the stack separately for each test.
Change-Id: I13ab31b26b70bc8537e8d8ab164051b3197cd68e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Qt Creator needs to parse the qmake.conf in order to get the
architecture for this Qt build when the Qt build is added.
At this point it does not know that it's reading an android
project, so it can't set the right environment variables. By
moving the error to the bottom, we let Creator parse the whole
file before getting an error, so that it can detect the options
it needs to define the Qt version.
Change-Id: I119523cb21e330dc5e957a6992476c4c3d4ab7b5
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
QButtonGroup emits signals on clicked, pressed and released for
buttons in the group, but for some (insuffienct) reason it did
not emit anything for toggle (the only signal that it didn't emit
anything for).
This patch changes that, by adding handling of that signal to
QButtonGroup.
Task-number: QTBUG-14857
Change-Id: I88bcd7b060b78c7ff05ea1adf7baaddfe6d463be
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
-Documentation looks weird when viewed in a narrow window because
much of the text are long.
-Qt Project's CSS uses "left".
-This change affects any documentation which uses the global
templates.
Change-Id: I8605a191904cb727b4818d8a1abf127ce2e45eb9
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Starting with Windows Vista, we can control the compositing window
manager using the DWM APIs. This allows us to make truly transparent
OpenGL windows.
We also have to detect and listen if compositing is enabled, otherwise
enabling transparency will cause glitches all over the place.
This (partially) fixes
Task-number: QTBUG-28214
Change-Id: I0fe1ec7adec8181b788c32de03c59142731d9e7f
Done-with: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The previous commit was unnecessary.
The value of QMAKE_CFLAGS is used for QMAKE_CXXFLAGS as well.
This is done in qcc-base.conf, which is included via
blackberry-armv7le.conf -> qcc-base-qnx-armv7le.conf -> qcc-base-qnx.conf -> qcc-base.conf
Currently, the BlackBerry arm compiler calls show duplicate entries.
This reverts commit 539f90e971.
Change-Id: I6e055ce9aafd16e91e15817946b7561bd76ee43e
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
If a MDI subwindow is focused and an ancestor has a QShortCut set
with the Qt::WidgetWithChildrenShortcut flag, it should trigger,
as MDI subwindows are not top-level widgets.
Task-number: QTBUG-32788
Change-Id: I7ec76d493b827ae6678209a56015ab6b432c1ed9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Commit 93ffb81df6 introduced this bug. As
it is in the header, it affects downstreams.
Change-Id: I02e86927e648153ca7c0b66ac945a7f99cc4cd89
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Done with Jan Arve
Task-number: QTBUG-33104
Change-Id: I8319748536d448d1c37a26527ced53156d8c2f56
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
as a side effect, this fixes the generators that were more bitrotted
(nmake and even more mingw).
Task-number: QTBUG-30644 #close
Change-Id: Iefa3f07125884412d091aa12b44935e5b1fb858a
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Try to stabilize doubleRepaint and others, try to get them away
from taskbar areas.
Change-Id: Icae8da575999afccb314edafd7deb16446e3d1c2
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The new test server image will not have a SMTP service installed, and
the network self test does not check for that either.
Change-Id: I1063777832148e184de4ddf21d9154364f644e1e
Reviewed-by: Richard J. Moore <rich@kde.org>
This test works with no Qt version (4 or 5) when testing with the
Squid (HTTP proxy) version deployed on the new test server image.
Task-number: QTBUG-33180
Change-Id: If244526a4baed9f3836dade007fe0f15649a8f86
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A wrong code path caused the textedit example to attempting to try to
save the file it was currently editing even if it was loaded
from the resource system.
Task-number: QTBUG-33105
Change-Id: I9e03168968a98a421e8ab93a8d06f808b72ac3b0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
As a side effect, this fixes wrong line break in "Third Party Libraries" section.
Change-Id: Ie6510fa94626a1c586621948a4681efdcf61f8b2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Change-Id: Ia786d4fab64da974bb60f24c05325925d42a1e70
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Distance fields are stored using a one-byte alpha component per pixel, a
format that QImage doesn't currently support. The Indexed8 format was used
instead, limiting what could be done with the QImage.
This patch introduces a new private class, QDistanceField, with a similar
API to QImage and using the Alpha8 pixel format. Unlike QImage which
aligns scanlines on a 4-byte boundary, QDistanceField tightly packs
scanlines together.
Task-number: QTBUG-30908
Task-number: QTBUG-32861
Change-Id: Ic273259ea07dfbd2b81a6358c0ca11a2330eb749
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
This reverts commit 9fa1bdeeb2 which
is no longer needed because the Android NDK now contains a
toolchain without the bug for which it was a work-around.
Task-number: QTBUG-31051
Change-Id: I601ba2fccb927ee7e818644de4474700e2eec8f1
Reviewed-by: BogDan Vatra <bogdan@kde.org>
sync up; this doesn't actually do anything in qmake.
if we end up calling cache() from within the initialization of the base
context, we cannot wait for for the completion of that initialization
before we proceed, obviously.
Change-Id: If30c6f3665fe423e767373a8821c406b2f5e0eca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/b64b4431c20afd9e39c1463e736f998ef450688f)
sync up; this doesn't actually do anything in qmake.
as we modify the environment, it must be properly locked.
this implies that initFrom() also needs to be called with a lock.
Task-number: QTCREATORBUG-9835
Change-Id: I48bae9af9adaa0518e5a9db0ba08ff057ae14f9f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
(cherry picked from qtcreator/d022a2d19cecb00397c2a215fc4e3bf64b1e627b)
sync up; this doesn't actually do anything in qmake.
creator's file watcher can trigger many parallel, entirely
non-hierarchical project reloads. if there is enough of them to exceed
the thread pool size, some will be serialized already by qtconcurrent,
not by our wait condition. these should notice a faulty spec, too.
Change-Id: I8ce40cb90fbc28045127881d57ec94e125df79af
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
(cherry picked from qtcreator/759d0a69dd3973b4785b6f9412f46666a05cdf85)
It's a nice feature to have.
MSVC also complains about using doubles to create enum values, so
the ugly workaround is:
enumValue = MyEnum(qRound(json["myEnumValue"].toDouble()));
[ChangeLog][QtCore][QJsonValue]Added QJsonValue::toInt().
Change-Id: I1a200b912abf66b2e96390b1980caff26cfa2685
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Controlling the layout from different functions is not easy, so
lets move it to the setupLayout function.
Change-Id: I3120a2e98b2f8425befa135595d4ad7ce1b8ca56
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Makes it possible for QElapsedTimer to be non-POD.
Change-Id: I5ffc59c7a93c187a4a814e6959f8383fa8d4cc44
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
It sounds like a good thing to have this warning, but for
future-proofing we can't have it. The system libraries might change
and add deprecation marks (OS X does that often). If they do that, we
don't want poor developers to have to fix all warnings before they can
build Qt again.
Change-Id: I4ff317da0de596c470bb1efe6e59bcf70aeec8fc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If we're compiling for Pentium or better CPUs, then we know that the
CPUID instruction is present (I think it was introduced in late 486s,
actually). So don't try to detect it. Simply assume it's there and then
execute it.
This means that if you compile Qt for Pentium (or higher) and run it on
an i386 or i486, you'll get a SIGILL (or whatever your OS produces for
an #UD processor exception). If the CPU detection code even got run --
SIGILL might happen for any other instructions found along the way.
Change-Id: Iacd4a94a51363a609a61fc2bfd2e218fb290272d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The exception message might contain valuable information about what went
wrong, so we should print the message.
Change-Id: I50c986d4c18cf6115017fcc92363c946be45024d
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
Comparing the value of two jobjects are not safe, as it's not guaranteed
that two jobjects that is referencing the same object,
will have the same value. To make things worse two jobjects might have
the same value even though they reference two different objects...
Change-Id: I997ea8abfb8c687c342b261bba3848cbbd741633
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
On Android, it's possible to reach the condition when window == 0
if you hit the Back key, since the previous bail-out is disabled
for this case. To avoid a null-pointer dereference, an extra
check is required.
Change-Id: Ic898cd82dd6e52c24505dd2248c98efcefc15b1c
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
You can specify a relative path to a .pro file in any directory.
Fixed a capitalization issue and a grammar issue and changed the
visible text in a link target.
Task-number: QTBUG-14139
Change-Id: Ib476bd400c46645709950c582492edcaaba9d7ed
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
That's not been in use for quite a while.
Change-Id: If5a18a54d32f330fe37655516d4b83e5d3d30afc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
