This constitutes a fairly complete submission of an entirely new
floating point type which conforms to IEEE 754 as a 16-bit storage
class. Conversion between qfloat16 and float is currently performed
through a sequence of lookup tables. Global-level functions
qRound(), qRound64(), qFuzzyCompare(), qFuzzyIsNull(), and
qIsNull() each with a qfloat16 parameter have been included
for completeness.
[ChangeLog][QtCore] Added new qfloat16 class.
Change-Id: Ia52eb27846965c14f8140c00faf5ba33c9443976
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's included by qglobal.h, so we get it for free in other headers.
Change-Id: I90072156e313271a5354a39cbf78a83a6885c431
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch replaces QRegExp by QString search and replace.
Change-Id: I11165afa45f8f9a856e6fb9b64929e4bdacb913d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Gcc defines neither _MIPS_ARCH_MIPS32 nor __mips32 on MIPS32
architectures, instead __mips is defined to 32.
This fix exposed bit-rot in qdrawhelper where qt_memfill32 was set as
a function pointer despite not being one since Qt4.
Change-Id: I87461823e54fa3166223ebf97175fd05d2f2fd16
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There should be no blank lines in \value content, otherwise qdoc
ends the list and starts a new one.
Change-Id: Idddc7992317894487445aea36397136df40b9691
Reviewed-by: Martin Smith <martin.smith@qt.io>
QHostAddress is one of the few classes in Qt which is pimpl'd but not
implictly shared, making it suprisingly expensive to copy around, return
by value and so on. Being pimpl'd it is also still lacking a move
constructor, like most of such types in Qt.
Remove a bit of the surprise factor and make it implictly shared. In
practice this means making it eagerly parse host addresses from strings.
Since it was entirely implemented out of line, replacing it with a
implictly shared implementation is binary compatible.
[ChangeLog][QtNetwork][QHostAddress] QHostAddress is now implicitly
shared.
Change-Id: Ia7ff94efcb74e7321b7607cd690c5c162f685605
Reviewed-by: Richard J. Moore <rich@kde.org>
[ChangeLog][QtBase][General] Removed support for WinRT/Windows Phone 8.1.
Task-number: QTBUG-57288
Change-Id: Ifd6d6780cbbdb710d99556ba3d2fb2e514d4f789
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
operator== and operator!= have been disabled, as they are likely to be
misused and are not particularly useful in practice. The same goes for
the QVersionNumber conversion convenience functions.
The constructor normalizes version component values so that invalid
versions like [5, -1, 3] cannot be constructed and made to wreak havoc
on assumed logic.
Change-Id: Iabb6876bd5dc11522032837f78cf825b921a49b2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
clang/g++ still warn when encountering the implementation of a
deprecated function.
Follows up 21a247adb4
Change-Id: I6ab1695acb520ef7ce7cb1896545d02607c3ce29
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
So that QFlags can use an (un)signed int matching the
underlying type as identified by the compiler and not by us.
Requires fixing a few warnings about sign conversion due to
QFlags misusages in qtbase that were either plain wrong, or
were relying on the enum being backed by an (un)signed int
when it wasn't.
Keep qtypetraits.h in the source tree in order to prevent
source breaks if some downstream #includes it (note however
that it did not contain any public API).
Change-Id: Ib3a92b98db7031e793a088fb2a3b306eff4d7a3c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's supposed to be a full alignment (like Top | Right), not
just one flag.
Change-Id: I656adda83742d7e4f31955322e937e979b32747c
Reviewed-by: David Faure <david.faure@kdab.com>
Initial support for INTEGRITY to build QtBase
Change-Id: I18f36b4dea9107f01e1c281e4b62880590c777a1
Reviewed-by: Tuukka Turunen <tuukka.turunen@theqtcompany.com>
Reviewed-by: Nikola Velinov <nvelinov@ghs.com>
Reviewed-by: Risto Avila <risto.avila@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Honor the rule of five. Copy assignment was already disabled.
Disable also copy construction, but re-enable the move special
member functions.
This requires making the container non-const; to avoid detaches
and keep compatibility with containers that only have begin/end
(but not cbegin/cend), use qAsConst. This requires moving qAsConst
definition a bit up in the file.
Change-Id: I19cd74437cf69baceada9483920a21e96d7b1727
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Don't use Dinkum choices when the C++ library is libC++ (QNX 7.0).
Change-Id: I18c3f716ccfb0c02dbfdc01eac4b707d3ae9aab6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
turns out that just appending builtin-qt.conf isn't a good idea:
executable-editing tools (objcopy, prelink, etc.) will happily drop the
"attachment".
a safe method would be adding a proper section to the executable, but
there doesn't appear to be an objcopy equivalent in msvc, and using
entirely different methods of embedding the file with different
toolchains seems like a rather bad idea.
so instead go back to the old method of building qmake with a generated
qconfig.cpp. of course, as said file is now created by qmake itself, we
have to compile qlibraryinfo.cpp a second time, and link a second qmake
executable.
Task-number: QTBUG-57803
Change-Id: I9e232693550aa870cec154e49cc06add13017cc2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We have to enable qt_safe_ftok with either sharedmemory or
systemsemaphore. In order to make the resulting QT_CONFIG work with the
bootstrap library we switch the features off for bootstrapping. Some
tests and examples have to be excluded when sharedmemory is not
available.
Change-Id: I3fc3926d160202b378be2293fba40201a4bf50c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows the Dptr parameter of the Q_DECLARE_PRIVATE_D macro to be
a smart pointer, not just a raw pointer.
Change-Id: Iaf27352e327e9aedea149461d47f2f11460a42dc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ISO 14443-3 is for nfc communication and uses 2 different checksums.
The existing one is from ISO 3309 and the other one is from ITU-V.41.
Both are needed to implement an own transport layer defined in ISO
14443-4 to allow nfc commands with a length above 250 byte independent
from the smartphone.
This change will avoid code duplication in QNearFieldTarget.
The private function qNfcChecksum is a copy of qChecksum.
Change-Id: I790ffec8e2ea46f88b2db6f48b64fdcb140e7b70
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
initially, the idea was that QLibraryInfo would receive a
pre-sysrootified ExtPrefix from the builtin qt.conf. matching this
against the sysroot would then tell us whether to sysrootify the Prefix
from a "regular" qt.conf as well.
however, this would have lead to some major ugliness and inconsistency
between the code paths, so i changed my mind.
unfortunately, i failed to adjust the remaining code, leading to
169a40d51 entirely breaking sysrootification ...
the proper (and nicely consistent) solution is to introduce a
SysrootifyPrefix key to qt.conf. this is user-accessible as well, so as
a bonus it is now possible to adjust the setting at qmake installation
time. incidentally, this omission was the last thing that prevented
using the same qmake host build for any imaginable configuration of the
same qt version ... i think.
Change-Id: Ic0eebf21f93651f6374628c0ad8b206d696a4a7e
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Clang pre-3.4 didn't like this and it's used in Xcode 5.1 (which we need
to support for 5.8).
error: 'this' cannot be implicitly captured in this context
typename T::const_iterator i = c.begin(), e = c.end();
^
Task-number: QTBUG-57488
Change-Id: I63e21df51c7448bc8b5ffffd148e688d7c9b89d6
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
g++ still warns when encountering the implementation of a deprecated
function.
Change-Id: I6a25fc8c814590e5337069f9bced0cdec97653bf
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this moves us another step towards the "outer" configure doing just
minimal bootstrapping of qmake.
a challenge here was that so far, qmake itself needed qconfig.cpp. this
was replaced by usage of a qt.conf file instead of compiled-in values.
however, to make the executable still self-contained, that qt.conf is
embedded into it (by simple appending of a fixed signature and the text
file).
the qmake with the embedded qt.conf is not used for the qt build itself,
which instead relies on the qt.conf in bin/ as before. however, due to
the missing built-in values, this file now needs to contain more
information than before. but except for a minimal version that is needed
to start up qmake/configure at all, that file is now also generated with
qmake. as some of the newly set up properties are subsequently used by
configure itself, qmake gains a (deliberately undocumented) function to
reload the qt.conf after it's fully populated.
unlike the old implementations, this one doesn't emit redundant qt.conf
entries which match the hard-coded fallbacks. omitting them leads to
leaner files which are more comprehensible.
Started-by: Paolo Angelelli <paolo.angelelli@qt.io>
Change-Id: I4526ef64b3c89d9851e10f83965fe479ed7f39f6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Commit c35fef9d3b wasn't sufficient. The
problem is that there's a complex combination of libc headers (math.h),
C++ headers (cmath), which may be provided by three different sources on
Linux (glibc, gcc and ICC). On some combinations, the isnan macro leaks
from math.h or cmath and that's what the the commit above tried to fix.
On some other combinations, there's no macro but there's an ::isnan
function defined. When we do "using namespace std; return isnan(x);",
that causes a compilation error. This commit solves that by detecting
whether there is a macro defined.
error: more than one instance of overloaded function "isnan" matches the argument list
function "isnan(double)"
function "std::isnan(double)"
argument types are: (double)
Change-Id: Iaeecaffe26af4535b416fffd148bf71826541bdd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Namely: decltype(). Ideally we'd want C++17's template constructor
argument deduction, but instead use the C++11 solution: a factory
function. This enables using things such as lambdas in the container
argument.
Change-Id: Idba64d8069d15bbafe54cfdebe24b1fba1eb8d0a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Provide appropriate alternative documentation where applicable.
Change-Id: I73d810938bb961a74d06d8cedb05c38675363ef0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds documentation for QOperatingSystemVersion::OSType and cleans
up some extraneous quotes.
Change-Id: Idaeb163caded9a51ce0fbcc812eb622b4227844e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That's what happens when you don't test and just rely on an the warning
listing. ICC has two warning numbers for deprecated warnings: one that
matches Q_DECL_DEPRECATED and one for Q_DECL_DEPRECATED_X.
Change-Id: I73fa1e59a4844c43a109fffd148ca7a05eda8f13
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Turn them into proper private features, and remove setting of
defines in the pri file.
Change-Id: Iafc11e93d4a9349bf15971dc1adac9a828ea03f6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This is the only warning we disable in a lot of places in Qt 5.8 source
code. If other warnings become common, we can add macros for them too.
Change-Id: Iaeecaffe26af4535b416fffd1489d1968e29c52a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The user can call qSetMessagePattern after program start, so we need to
be sure that the parsed argument data is properly cleared.
Task-number: QTBUG-57144
Change-Id: I1978c6b95bd84639a8c4fffd1487429b04725522
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Introduce a glProgramBinary-based disk cache in QOpenGLShaderProgram.
By switching the typical
program->addShaderFromSourceCode(QOpenGLShader::Vertex, ...)
program->addShaderFromSourceCode(QOpenGLShader::Fragment, ...)
invocations to
program->addCacheableShaderFromSourceCode(QOpenGLShader::Vertex, ...)
program->addCacheableShaderFromSourceCode(QOpenGLShader::Fragment, ...)
the compilation may be skipped via gl(Get)ProgramBinary and a disk
cache, when supported. Such QOpenGLShaderProgram instances will have
no QOpenGLShader instances attached. Instead, the entire program
binary (which is driver-specific) is loaded as-is.
Support means OpenGL ES 3.0 or the presence of
GL_ARB_get_program_binary, in combination with >= 1 supported binary
formats. Note that some drivers claim program binary support but
expose no formats. This amounts to no support in practice.
When support is not present, calling the new functions is equivalent
to the non-cacheable variants. If the OpenGL driver changes (vendor,
renderer, version strings), recompilation and storage of the new,
potentially incompatible binary program will happen transparently.
The cache can always be disabled by setting
QT_DISABLE_SHADER_DISK_CACHE=1 or the new application attribute
Qt::AA_DisableShaderDiskCache.
Location-wise the primary choice is the shared cache
(GenericCacheLocation). If this is not available or is not writable,
the per-process one (CacheLocation) is used instead.
In addition to the new public APIs in QOpenGLShaderProgram, the main
shader users in QtGui are migrated as well. (OpenGL paint engine,
glyph cache, blitter, eglfs mouse cursor). This means that any
application using QPainter on OpenGL or widgets with eglfs will
benefit from the improved startup times. Qt Quick will follow suit as
well.
[ChangeLog][QtGui][OpenGL] QOpenGLShaderProgram offers a built-in
program binary disk cache for systems with OpenGL ES 3.x or
GL_ARB_get_program_binary. This can lead to significant increases in
performance when it comes to application startup times for
example. Usage is opt-in for direct C++ users of the class, however
Qt's own main users of shaders, including Qt Quick and QPainter's
OpenGL engine, are migrated to use the new, cache-enabled APIs.
Opting out on application level is always possible via
Qt::AA_DisableShaderDiskCache.
Task-number: QTBUG-55496
Change-Id: I556f053d258bfa6887b1d5238c9f6396914c5421
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
