QTextMarkdownImporter::import() took a QTD* as if it would be ok to
reuse one instance of QTextMarkdownImporter for repeated importing into
different documents; but in practice, we never do that: in fact it's
usually a short-lived, stack-allocated object, as in
QTextMarkdownImporter(&doc, QTMI::DialectGitHub).import(input);
So it's less clumsy internally to require the document be provided to
the constructor: that way a QTextCursor can be constructed immediately
too, as part of the importer object rather than separately on the heap.
This is private API, unused outside qtbase.
Change-Id: I8041ceb33cb7e7608df55dc5a963292c585afb90
Reviewed-by: Oliver Eftevaag <oliver.eftevaag@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Private libraries were linked conditional to QT_FEATURE_private_tests in
the CMake file. qstatictext_p.h was included conditional to developer
build. A developer build fails, with test enabled and private tests
disabled.
=> Change the CMake condition to QT_FEATURE_developer_build, to resolve
mismatch between CMake and cpp file.
Pick-to: 6.6 6.5 6.2
Change-Id: I79213e7d3c38851b8b80cb8ab248d7bff750c227
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
These are local containers that are either:
- Already const and didn't need Q_FOREACH to begin with
- Can be simply made const, just by adding const keyword
In one case the unittest checked that the container's size is 1, so use
list.first() instead of a for-loop.
In files where Q_FOREACH isn't used any more, remove
"#undef QT_NO_FOREACH". Also remove those files from NO_PCH_SOURCES.
Drive-by changes:
- Remove parenthesis from one-line for-loops
- Make the for-loop variable a const& where a copy isn't needed
Task-number: QTBUG-115839
Change-Id: Ide34122b9cda798b80c4ca9d2d5af76024bc7a92
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The loop was iterating over a temporary container, so it couldn't have
changed it. Store the container in a const auto variable and use
ranged-for.
In files where Q_FOREACH isn't used any more, remove
"#undef QT_NO_FOREACH".
Task-number: QTBUG-115839
Change-Id: I402df5fa48f4287f3cc989ddae1524da43999049
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The density of Q_FOREACH uses in this and some other modules is still
extremely high, too high for anyone to tackle in a short amount of
time. Even if they're not concentrated in just a few TUs, we need to
make progress on a global QT_NO_FOREACH default, so grab the nettle
and stick to our strategy:
Mark the whole of Qt with QT_NO_FOREACH, to prevent new uses from
creeping in, and whitelist the affected TUs by #undef'ing
QT_NO_FOREACH locally, at the top of each file. For TUs that are part
of a larger executable, this requires these files to be compiled
separately, so add them to NO_PCH_SOURCES (which implies
NO_UNITY_BUILD_SOURCES, too).
In tst_qglobal.cpp and tst_qcollections.cpp change the comment on the
#undef QT_NO_FOREACH to indicate that these actually test the macro.
Task-number: QTBUG-115839
Change-Id: Iecc444eb7d43d7e4d037f6e155abe0e14a00a5d6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Accent color role has been renamed according to name rule of other
color roles in QPalette.
Fixes: QTBUG-116107
Pick-to: 6.6
Change-Id: I70ac98a1e97afbdc7ea5f8d79f808c307e170712
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
All of these fall into the trivial category: loops over (readily made)
const local containers. As such, they cannot possibly depend on the
safety copy that Q_FOREACH performs, so are safe to port as-is to
ranged for loops.
There may be more where these came from, but these were the ones that
stood out as immediately obvious when scanning the 100s of uses in
qtbase, so I preferred to directly fix them over white-listing their
files with QT_NO_FOREACH (which still may be necessary for some files,
as this patch may not port all uses in that file).
Pick-to: 6.6 6.5
Task-nubmber: QTBUG-115839
Change-Id: I7b7893bec8254f902660dac24167113aca855029
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
"Never use a dynamically-sized container for statically-sized data."
Port the loop from Q_FOREACH (which can't deal with arrays) to ranged
for (which can).
Pick-to: 6.6 6.5
Task-number: QTBUG-115839
Change-Id: Ifef42704c4f695a8fb05ea5d9b3e095af3f35171
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Add the boilerplate standalone test prelude to each test, so that they
can be opened with an IDE without the qt-cmake-standalone-test script,
but directly with qt-cmake or cmake.
Boilerplate was added using the following scripts:
https://git.qt.io/alcroito/cmake_refactor
Manual adjustments were made where the code was inserted in the wrong
location.
Task-number: QTBUG-93020
Change-Id: I2ef59684cf297a0222a136ce7b5630037294d000
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
To maintain flexibility in how we store the features, we
introduce accessors through indirection rather than accessing
the property directly.
Made as response to API review.
Pick-to: 6.6
Change-Id: I3e5d4ddabe93f67796af4626fddefe028ded9888
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
The color role AccentColor has been added to QPalette.
This patch implements the new color role in QCssParser and subsequently
in QStyleSheetStyle.
The QBrush variable names used to populate brushes, have been changed
into speaking names for better code readability.
tst_QCssParser has been adapted accordingly.
The test function accentColor() has been added in tst_QStyleSheetStyle.
Documentation has been updated.
Change-Id: Ib09ddc1b61868f2bb8f70f654e83ea1c35276d30
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Use qUtf16Printable() to convert QString to somthing consumable by
%ls. Fixes the format/argument mismatch on non-Windows platforms:
tst_qfont.cpp: In member function ‘void tst_QFont::italicOblique()’:
tst_qfont.cpp:153:67: warning: format ‘%ls’ expects argument of type ‘wchar_t*’, but argument 2 has type ‘const ushort*’ {aka ‘const short unsigned int*’} [-Wformat=]
153 | QVERIFY2(f.italic(), qPrintable(QString::asprintf("Failed for font \"%ls\"", f.family().utf16())));
| ^~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~
| |
| const ushort* {aka const short unsigned int*}
Amends 4bf82909f1.
Change-Id: I0c7e2dca91a093835d7dba8bff2e5ea78d3a926e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It fails locally for me on Lucida Calligraphy.
Lucida Calligraphy only has one style though: Italic.
Change-Id: I42442cb922132a00f09084cef9c739196a9a53c2
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
These classes depend only on Core, not Gui.
This allows dropping the dependency of tst_qxmlstream and tst_qzip on
QtGui, and prevents a tst_qxmlstream FTBFS when building with
QT_NO_TEXTODFWRITER.
Symbols move from QtGui to QtCore, but the classes are private API, so
not under BC constraints.
The classes are not used outside qtbase, so no other in-tree users
need porting.
Task-number: QTBUG-3897
Change-Id: Ifa148f43ec139d7f9ac1f3893e2fcf4640e3c60c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is useful for a lot of applications that render text coming from
sources which already support arbitrarily numbered lists (like chat
applications for example). Application-side workarounds usually have
significant overhead; and this feature has been requested multiple times.
It should be possible to both read and write HTML with the <ol start="x">
attribute, and read and write Markdown with arbitrary numbers for the
first item in a list.
[ChangeLog][QtGui] QTextList now supports specifying a start index using
the new QTextList::{setStart, start} functions. The HTML start attribute
on ordered lists in rich text documents is now parsed and used when
rendering a text list. Non-negative indices in markdown lists are now
also parsed and written properly. This allows starting a list with a
different number than 1.
Fixes: QTBUG-30407
Fixes: QTBUG-65384
Task-number: QTBUG-107562
Change-Id: Ib35b9378d9134ffedaa2d92f728b0984793aa7c1
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The "Private Use Area" are subsets of Unicode which are not
considered regular characters, but reserved for fonts to provide
custom glyphs.
If these were used and the main font did not have support for them,
we would look them up in other fonts and sometimes display an
arbitrary selection of glyphs, based on whatever existed on the
platform. This is unexpected and different from how native apps
work on Windows, for instance.
[ChangeLog][QtGui][Text] Font merging (automatic assignment of
alternative fonts) is no longer applied for characters in the
Private Use Areas of Unicode.
Pick-to: 6.5
Fixes: QTBUG-110502
Change-Id: Id2c63786aafda59bf170e0d7263eb78a391fe46d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Note: This requires an update to the tst_qtextlayout test, because
the test assumed that the Arabic string would always yield a run
of two glyphs. This was a side effect of how Harfbuzz handled
Qt's test font, which has zero font tables and cannot be used for
shaping. With the Harfbuzz update, the Arabic text here yields a
single cluster instead, which actually makes more sense, so the
test has been made a bit more robust to support both cases.
Pick-to: 6.2 6.5
Task-number: QTBUG-110338
Change-Id: I93d4cf8e3046dc93224e144d4c81d86bef4918d1
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Setting a negative line width does not make much sense, but in
earlier Qt versions, this work the same as if the line width was 0
(just give you the minimal layout given wrapping constraints).
But since 991c056438, we check if
current width > line width at an earlier point, and because 0 > -1,
we would exit immediately before adding any characters to the text
line.
To restore the behavior in earlier versions, we set the minimum
possible line width to 0.
Pick-to: 6.5
Fixes: QTBUG-109474
Change-Id: Iceadd5135681f61b30de8221853834983941c5a4
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Reviewed-by: hjk <hjk@qt.io>
The qt_findAtNxFile helper in qicon.cpp expects a local file name that
can be probed with QFile::exists. If the src attribute of an <img>
element specifies the location of the image as a file:/ or qrc:/ url
rather than as a local file name, then we need to strip the scheme
off the file path, and in the case of a qrc URL leave the :/ prefix
before calling the qt_findAtNxFile helper.
Amends, and partially reverts, 760df72565.
We can't avoid testing whether the source in the HTML is provided as a
URL before interpreting it as a file name.
Pick-to: 6.5 6.4 6.2
Fixes: QTBUG-109212
Change-Id: I7ea7a5bfde79bab90a8025c42e754129813dd0fc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If an image source in HTML is specified via local file name or resource
path (i.e. without qrc prefix), then the correct image is loaded.
With file:/ or qrc:/ schema however, the image is either not loaded at
all, or the 2x image is not loaded. The qt_findAtNxFile helper in
qicon.cpp gets a URL path, but expects a file path (that can be tested
with QFile::exists).
Task-number: QTBUG-109212
Pick-to: 6.5 6.4 6.2
Change-Id: Ibcf687c69b3e53a10f21d718d28c8177a02d6be6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Amends 52ce0c177e, which added the test
without adding it to the parent directory.
Refactor the test code to be data driven, add the image files as
external test data files, and adjust the test code to find the files.
Use the QTextImageFormat from the document rather than a manually
crafted one, as otherwise we don't test a real usecase.
This also makes the test more flexible for adding qrc, resources, and
file URLs.
Task-number: QTBUG-109212
Pick-to: 6.5 6.4 6.2
Change-Id: Id0771037b961d95ec3cadd0cd6467d2448f22884
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Santhosh Kumar <santhosh.kumar.selvaraj@qt.io>
The object replacement character (U+FFFC) is used to represent
inline objects such as images in rich-text. To enable this,
we have special handling of it in QTextEngine. For classes
where inline images are not supported, it will just be hidden
from the visual text, which is unexpected.
Instead of always special-casing it, we make this dependent
on whether the document layout has registered any object handlers.
If they have not, then there will be no visual representation of
the object, and it is better to show the glyph for it.
For anything based on QTextDocument, there will always be the
image handler, so U+FFFC will still have special handling there,
but for non-rich labels and plain text editors the glyph will
be shown instead.
Note that there was also a bug in QLineEdit, where the object
replacement character was always replaced by a space. This was
introduced in 2007, in a patch which replaced a !ch.isPrint()
with a check for "the most obvious non-printable characters"
to reduce the number of characters that were not shown. However,
U+FFFC is a printable character and would thus not have been
filtered by the !isPrint() condition, so I think this was a
mistake at the time. However, due to the special-casing of
the character in Qt, it would not have had any effect until
now.
This also changes the QTextLayout::cursorToXForInlineObject()
test to actually test proper inline objects, as this was
previously using a hack which depended on the inline object
code to be used even for plain QTextLayouts with no handlers
for these.
[ChangeLog][Text] The object replacement character (U+FFFC)
is now only filtered out in rich text controls, where they
represent inline objects. In other controls, its glyphs will
be shown as with other text.
Pick-to: 6.5
Fixes: QTBUG-101526
Change-Id: I7fcaf2b10918feb41589e1098016efbf79a0e62d
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Variant-selectors are special unicode symbols which are used to
modify glyph selection for the preceding character. For instance,
a regular symbol could be turned into a color emoji using VS16,
the emoji variation selector. In order for this to work, however,
the font that handles the selector has to handle the full pair of
characters, so that it can apply the correct substitution rules.
One specific example of this was on macOS, where an airplane
symbol + VS16 would match the symbol to the default UI font but
the VS16 to the emoji font. Since there string provided for the
emoji font did not have any preceding character for VS16, we just
ignored it.
To improve on this, we now detect variation selectors that have
been matched to different font engines than the preceding
character. When such a case occurs, we check if the selector font
also supports the preceding character, and if it does, we keep
the pair together and use the same font for both.
[ChangeLog][QtGui][Text] Fix some cases where a variation-selector
character would be ignored in font selection and the correct
variant of a character would thus not be selected.
Task-number: QTBUG-108799
Change-Id: I9f427e0520e652ee2f24a4f7dc3c1957251e06bd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This amends fccd419dd6.
If Harfbuzz failed on one of the items in a string and returned
zero glyphs, then we would exit the shaping loop. The mentioned
change fixed a crash related to this when the ignored character
was the only character in the string, but it occurred in a
subitem of a longer string, then we would return and fail to
lay out the rest of the string.
This popped up recently because an update to Harfbuzz has caused
it to return zero glyphs when applying the Apple emoji font to
an isolated variant character (see bug report). When we matched
the symbol to the main font and only the variant character to
the emoji font, we would get in this situation, and end up
exiting the shaping early.
[ChangeLog][QtGui][Text] Fixed a regression which would
sometimes cause text to disappear if the string contained
an unmatched variation selector character.
Pick-to: 6.4
Fixes: QTBUG-108799
Change-Id: I616ab1b2d33c2df731419c5ce06fbc578a625a32
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When Harfbuzz returns zero glyphs, this will typically be because
the character is ignored. We currently have no way to differentiate
this from actual error cases, so to avoid return the error glyph
for cases which are not really errors, we set the dontPrint flag
for this.
When we add a way to differentiate between error cases and non-error
cases later, we should revert this for the actual errors.
Pick-to: 6.4
Task-number: QTBUG-108799
Change-Id: I2a910d951b71c705fb4dd761fcfe3a942b3afa7c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This is improved version of previous fix
013c346a8d that was reverted because it
broke some tests for Quick Text. The problem was that it did not work
correctly in the case the text was wrapped to a fixed width.
To deal with this we'll accumulate current line full width (as if it
hadn't been wrapped) in layout data (layoutData->currentMaxWidth).
Then when the next line is explicitly wrapped by line or paragraph
separator, this accumulated width will be used to adjust layout's
maximum width.
Change-Id: Iad7119d9808e1db15fe1fbc5db049c3db928529f
Fixes: QTBUG-89557
Fixes: QTBUG-104986
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
When comparing a glyphIndex with a hard coded number, the number is
cast to an int, whereas the glyphIndex is an unsigned int.
That causes a compiler warning.
This patch forces the numbers to be cast to an unsigned int.
Change-Id: I8a31124c6afacfc4ecfb13caf2cb8133dad44a21
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This is a semantic patch using ClangTidyTransformator as in
qtbase/df9d882d41b741fef7c5beeddb0abe9d904443d8, but extended to
handle typedefs and accesses through pointers, too:
const std::string o = "object";
auto hasTypeIgnoringPointer = [](auto type) { return anyOf(hasType(type), hasType(pointsTo(type))); };
auto derivedFromAnyOfClasses = [&](ArrayRef<StringRef> classes) {
auto exprOfDeclaredType = [&](auto decl) {
return expr(hasTypeIgnoringPointer(hasUnqualifiedDesugaredType(recordType(hasDeclaration(decl))))).bind(o);
};
return exprOfDeclaredType(cxxRecordDecl(isSameOrDerivedFrom(hasAnyName(classes))));
};
auto renameMethod = [&] (ArrayRef<StringRef> classes,
StringRef from, StringRef to) {
return makeRule(cxxMemberCallExpr(on(derivedFromAnyOfClasses(classes)),
callee(cxxMethodDecl(hasName(from), parameterCountIs(0)))),
changeTo(cat(access(o, cat(to)), "()")),
cat("use '", to, "' instead of '", from, "'"));
};
renameMethod(<classes>, "count", "size");
renameMethod(<classes>, "length", "size");
except that the on() matcher has been replaced by one that doesn't
ignoreParens().
a.k.a qt-port-to-std-compatible-api V5 with config Scope: 'Container'.
Added two NOLINTNEXTLINEs in tst_qbitarray and tst_qcontiguouscache,
to avoid porting calls that explicitly test count().
Change-Id: Icfb8808c2ff4a30187e9935a51cad26987451c22
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Include the spacings used, to avoid a naming collision.
Change-Id: Iaf78f7142f6780dcf4c7a0b973db9f625af06767
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
When laying out a text and calculating maxWidth, we must _always_ take
into account the accumulated width of spaces (lbh.spaceData.textWidth)
regardless of wrapMode, other text content, spaces position, etc.
Fixes: QTBUG-106947
Change-Id: I2ac9af92ed7dd07c1e040bfcf83949a358d1c9c9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This introduces a way to trace each entry in the glyph index
array to a specific index in the original text passed to
QTextLayout, as well as a convenience function to access
the original string from the QGlyphRun.
The index information is stored in the logClusters array internally
in Qt, but it contains the inverse information: For each
character in the output string, it contains an index into the
glyph array. In order to get the string indexes for each glyph,
which makes a lot more sense in the context of the QGlyphRun
API, we need to do a little search to construct the data.
To avoid adding unnecessary allocations, we make the new APIs
opt-in. If you do not specify anything, you will only get the
glyph indexes and glyph positions as before. However, you
can now specify exactly which parts of the layout to extract
using an optional flags parameter.
This also adds a manual test which can be very handy to
visualize QTextLayouts and how they are split into QGlyphRuns.
Fixes: QTBUG-103932
Change-Id: Ie4288fff338b9482aba0aba29fc7e1e59fa60900
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
The placeholder text was given its own QPalette color role in Qt 5.12,
but there has been no way to specify it from a Qt style sheet.
Fixes: QTBUG-93009
Change-Id: If58ca844c19c65b7eee14c6d5730a4ba27640c33
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This reverts commit 013c346a8d. It was
determined to cause a regression in Qt Quick: QTBUG-106899.
In order to unblock integrations, we need to revert the change. It
can be re-committed later when the problem has been analyzed and
addressed.
Pick-to: 6.2 6.4
Fixes: QTBUG-106899
Task-number: QTBUG-89557
Task-number: QTBUG-104986
Change-Id: I04054587f68ab39fdb038b02fc69ebfa3dc7d197
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When laying out, we need to increase layout's maximum width _only_
if the previous line was not explicitly wrapped by a line or paragraph
separator, or if the current line's width is greater than the
previously accumulated layout's maximum width.
Fixes: QTBUG-89557
Fixes: QTBUG-104986
Pick-to: 6.2 6.4
Change-Id: Ib7cc4b9dda8f20166dcbd5cfd3b56424bb33d14a
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
When TopMargin is set in TextBlock and the mouse click position is
between Margin (the mouse is not on the textrect), the cursor will
usually jump to the end. So topMargin should be considered when
hitTest() calculates coordinates.
Fixes: QTBUG-91774
Pick-to: 6.4 6.3 6.2
Change-Id: I231377263855b9cd7152684203fc4ed2e9299bb9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tang Haixiang <tanghaixiang@uniontech.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
If a font family has several instances from different foundries,
we disambiguate this by adding the foundry name in brackets behind
the family. But QFontDatabase::hasFamily() would only check for
families().contains(familyName). So if the database contains e.g.
Foo [Bar] and Foo [Baz] then a check for hasFamily("Foo") would
fail.
So we need to actually check for the family name instead. In
doing this, we also skip the extra step of building the list
and then searching it, but just go directly to the source.
This removes the BLACKLISTing of Ubuntu and also introduces a
QSKIP on Unix-based platforms without fontconfig, since there
is no way to know which default fonts are acceptable on those
platforms.
Pick-to: 6.4
Fixes: QTBUG-86967
Change-Id: Id8ad80a1671daf1c14fbad8bb8f4c51ee1c59709
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The QTextFormat::FontFamily enum is deprecated since Qt 6.0, however it
is still used in the code.
To retain backward compatibility with the old data stream formats, we
introduce a new internal QTextFormat::OldFontFamily enum value, which
has exactly the same value as QTextFormat::FontFamily, and use it
instead.
Task-number: QTBUG-104857
Pick-to: 6.4 6.3 6.2
Change-Id: Ibf5258b621c2b0aa507005dfe2c1e80c26ddb0d4
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If the cached font has a different DPI than the one used in
QPainter, we need to treat this the same as if other font
properties have changed and redo the layout.
This happened when running the QStaticText test on Wayland,
because the default dpi was 100 and the QPixmap we ended up
drawing to was 96. This caused the pixel size of the font to
be calculated differently when doing drawText() (using 96 dpi)
and drawStaticText() (using the cached 100 dpi).
Pick-to: 6.4
Fixes: QTBUG-100982
Change-Id: Ie4270341bb8a64b6458eb67ba460a282c65dc26b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When a markdown document contains a "naked" URL, or an angle-bracketed
<URL>, md4c recognizes it, and we set the AnchorHref charfmt property.
There's no need to expand it into the [text](url) form if the text is
the same as the url, there is no tooltip, and the url is valid.
QTextMarkdownWriter now writes a CommonMark "autolink" in that case:
https://spec.commonmark.org/0.30/#autolinks
[ChangeLog][QtGui][Text] QTextMarkdownWriter now writes an autolink
whenever a hyperlink has no custom text and no tooltip, including
when the document was parsed from Markdown containing a naked URL.
Pick-to: 6.4
Fixes: QTBUG-94713
Change-Id: I432db8499c62e1e0b1e913bfd8ef2147e3c2bb2a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Found by codespell
Pick-to: 6.4
Change-Id: Ie3e301a23830c773a2e9aff487c702a223d246eb
Reviewed-by: Nicholas Bennett <nicholas.bennett@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
