Instantiate the QProcess object on the stack to ensure resource
cleanup and remove the QProcess * member variable.
Use qobject_cast<QProcess *>(QObject::sender()) instead
of the member variable in the helpers slots to ensure that signals
from a leaked QProcess do not interfere with other tests.
Task-number: QTBUG-47370
Change-Id: Ifc0dccb7e4b18069d236df53bccdcb6a47df6346
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
QDateTime values with a UTC offset are not correctly serialized with
QDataStream::Qt_4_0. So use a newer QDataStream format for this type and
mark it with "@DateTime" instead of "@Variant".
Task-number: QTBUG-46551
Change-Id: I211c89e8cd0211c949ec993e6ffd5192d0eebbb3
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Left and right were swapped which caused invalid selection ranges to be
emitted through selectionChanged.
Task-number: QTBUG-48402
Change-Id: I18692c2b50c49ab39065f9b360b37b7615227ee9
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
The test assumed that an event loop can be tested for emptiness
multiple times, which is wrong because an event can be delivered any
time.
Change-Id: Ic44245321eeed2091b640ada2c83d205b83a1cc2
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This test when running on Windows has a race condition since in qthread_win.cpp the
finished signal is emitted before everything is cleaned up.
Change-Id: I3c03d9a245e297e8f79b2be2c34398bf7bac9bae
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Most processors have carry flags which they set on addition overflow, so
it's a good idea to access them whenever possible. Most of them also
have widening multiply instructions that can be used to detect overflow
of the non-widening version.
Tested to compile on:
Architecture Compiler
x86 GCC 4.9, GCC 5*, Clang 3.6*, ICC 16 beta
x86-64 GCC 4.9, GCC 5*, Clang 3.6*, ICC 16 beta
x86-64 ILP32 GCC 4.9, GCC 5*, Clang 3.6*
IA-64 LP64 GCC 4.8
ARMv7-A GCC 4.9, Clang 3.6*
AArch64 Clang 3.6*
MIPS GCC 4.9, Clang 3.6*
MIPS64 GCC 4.9, Clang 3.6*
PowerPC GCC 4.9, Clang 3.6*
PowerPC 64 GCC 4.9, Clang 3.6*
SPARC Clang 3.6*
SPARCv9 Clang 3.6*
[*] supports the intrinsics
If the compiler does not offer a way to detect an overflow, we do it by
hand. For unsigned additions, that's easy, since the C++ language
specifies the behavior of the overflow. That's also the reason why this
code is implemented only for unsigned integers.
For the multiplication, if the compiler does not support widening
multiplications, we do it with a division instead. This is necessary for
GCC < 4.5 and compilers not compatible with GCC or MSVC.
Change-Id: I049a653beeb5454c9539ffff13e637de0f1338c1
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In some cases it's not possible to use QT_HASH_SEED, specially when
we need to set the environment variable from inside the application,
as dynamically loaded libraries or plugins may create static QHash
instances. That would set qt_qhash_seed to a value different from
-1 and skip the env var value.
For those cases, and when we still want to set qt_qhash_seed, we
provide a way to enforce its value.
Auto-tests accessing qt_qhash_seed directly have been updated
accordingly. Usage in qdoc, uic and rcc has been left as is
for the time being.
Change-Id: I3b35b4fa0223c83b1348a6508641905a2a63266f
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
By serializing the capitalization value of QFont, it ensures that it is
correctly preserved when QPicture streams it and later plays it back.
Subsequently the QDataStream version has been bumped up to account for the
change of the data format for serializing QFont.
[ChangeLog][QtGui][QFont] QFont now serializes the capitalization setting.
[ChangeLog][Important Behavior Changes] QDataStream version bumped up to
17 to account for changes in the serialization of QFont.
Task-number: QTBUG-15214
Change-Id: I042680760e5a69d18d41e786b7500a3eebbe562f
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Newer test functions don't have those. Removing those comments makes
the code consistent.
Change-Id: I542b89e797ef061395ce1fc87d848195e6f81f35
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
QDateTime::addSecs needs to do something similar, but not identical
because it needs the number of days too. And then there are daylight
savings transitions...
Task-number: QTBUG-47717
Change-Id: I7de033f80b0e4431b7f1ffff13f976f4f5e5a059
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Playing with the offset argument of pcre_exec is not equivalent to
adjusting the pointer to the subject string. In particular, PCRE
can go behind the offset to check for lookbehinds or "transition"
metacharacters (\b, \B, etc.).
This made the code that deals with QStringRefs not matching in behavior
with the corresponding code dealing with QStrings. For instance,
QString subject("Miss");
QRegularExpression re("(?<=M)iss");
re.match(subject.mid(1)); // doesn't match
re.match(subject.midRef(1)); // matches!!!
Instead, actually adjust the pointer to the subject string so that
the behavior is identical. A broken test that relied on the
equivalence is also removed.
Change-Id: If96333241ef59621d7f5a6a170ebd0a186844874
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Give setStandardOutputFile2 a sensible name, move it to where it
belongs and remove bogus Q_OS_WINCE ifdef.
Change-Id: I5c843e8b6cb626979966f3e61f7a7c720173bb28
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Do not call bytesAvailableInChannel if the source pipe end is
invalid. This is the case when redirecting channels on Windows.
The assertions in bytesAvailableInChannel were triggered whenever
an output process or output file was set and waitForBytesWritten
was called.
Task-number: QTBUG-45548
Change-Id: I225dfea2c5e27e122f75008a3a06d425554e00fe
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Drop process output to nullDevice(), if an application does not request
forwarding, redirecting or reading from the device channel. This
prevents from accumulation of unnecessary data which can not be read.
Change-Id: Ia311a8c658a46cf580ffa9484c5369f3fc5f98a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The generated xml file is now lowercase.
This was changed in shared-mime-info 3805d0bcf2.
It led to runtime warnings "No file found for ...", which helped notice the bug.
Change-Id: I31f0fc7f0fe8a098c3f79c0bcbeeb1909d2cc05a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The buffer may have been left dirty if we were unable to write all the
data to the child process in the previous run. So ensure we clear it
before starting a new one. We already did that for stdout and stderr,
for some reason.
Task-number: QTBUG-44517
Change-Id: I1a800c709d3543699131ffff13c419da3bbffacf
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It failed on Windows due to readonly files copied from the resource,
until adding a setPermission call.
Change-Id: I1d42b53763583aca73d011e0f2bbf061ef6aa891
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
On Windows and OS X, where QStandardPaths does not use XDG_DATA_DIRS/
_HOME and shared-mime-info is not installed, the tests that require
additional shared mime info xml files were never run.
Mend that by using QStandardPaths' test mode instead of setting
XDG_DATA_HOME.
Change-Id: I53b75c293c41c4dac63986dcb88972c2b54d5428
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][Important Behavior Changes] QDebug output for QStrings
changed compared to Qt 5.5.0 to more closely match the output of
previous Qt versions. Like Qt 5.5.0, QDebug will escape non-printable
characters, the backslash and quote characters, but will no longer
escape the printable characters.
Task-number: QTBUG-47316
Change-Id: I52dd43c12685407bb9a6ffff13f62ef68cbc80c5
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Otherwise, on some systems (Windows), we'll always create the same dirs.
Change-Id: Id3d5c7bf4d4c45069621ffff13f79ba91e0f974b
Reviewed-by: Christopher Adams <chris.adams@jollamobile.com>
[ChangeLog][QtCore][QLoggingCategory] Fixed behavior of default
severity passed to constructor or Q_LOGGING_CATEGORY with regards to
QtInfoMsg, which was previously treated as being more severe than
QtFatalMsg.
This is because the code was using the numeric value of QtMsgType as a
proxy for severity (via the <= operator), but the value of QtInfoMsg is
greater than QtFatalMsg. Instead, the severity ordering must be dealt
with explicitly.
Change-Id: I5f178afc735221b00cb67c2cea4fa964bd9079ce
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
All overloads of QProcess::start will now check whether the program
string is empty and in that case
- set error to FailedToStart,
- set errorString to "No program defined",
- emit error.
Until now only one of the three overloads behaved like this.
As a side effect, start(QString(), QStringList()) will not crash on
Windows anymore.
Task-number: QTBUG-47404
Change-Id: I2f93657204fe3643b1d74a74817843c05fc4a96b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
So we can have interoperability with algorithms.
Motivated by inefficient code like qDeleteAll(hash.keys())
[ChangeLog][QtCore][QHash] Added key iterators, accessible through
keyBegin() and keyEnd().
Change-Id: I1f9db8a7a4294e1556cbb50b8fe5ebdcf0dc29a2
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
So we can have interoperability with algorithms.
Motivated by inefficient code like qDeleteAll(map.keys())
[ChangeLog][QtCore][QMap] Added key iterators, accessible through
keyBegin() and keyEnd().
Change-Id: Ieee2f9ad031e9d1e845a71447746699bbe95b96c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Preparing the replacement of Q[TRY]_VERIFY(a == b) by
Q[TRY]_COMPARE(a, b) for non-boolean types.
Change-Id: Iab6ec2f0a89a3adc79e18304573994965013dab5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
The history state had the limitation that it was hard (or impossible) to
use when more than one default state had to be entered. For example,
using it in a parallel state was impossible without ending up in an
infinite loop.
This patch changes the QHistoryState to only have an initial transition,
and the state selection algorithm is changed accordingly. It also brings
QStateMachine closer to the SCXML standard.
The existing defaultState is implemented on top of the
defaultTransition: when used, a new transition, with the default state as
its target, is set as the defaultTransition.
Task-number: QTBUG-46703
Change-Id: Ifbb44e4f0f26b72e365af4c94753e4483f9850e7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
A parallel state cannot have an initial state, as all children of the
parallel state will be entered. Setting such an initial state on a
QState marked as ParallelStates would already produce a warning and
ignore the initial state. Now any initial state that has been set before
changing the child-mode to ParallelStates will also produce a warning
and remove the previously set initial state.
Change-Id: Ie5fcd44b03516744f785f2d1880bf806918c44d4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Set QFileDevice::WriteUser on all files extracted from resources. These
are read-only, which is preserved by QFile::copy(). This caused the
deletion of the temporary directory to fail on Windows.
Change-Id: Id99de9160471c38bcec68025c89cfabbe209bdbe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][QtCore][QProcess] Fixed a bug that caused QProcess to launch
a child process on Unix even if the directory specified with
setWorkingDirectory did not exist.
Task-number: QTBUG-47271
Change-Id: Ib306f8f647014b399b87ffff13f195158b0e52f5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We force a recreation of the library paths with added information on
construction of QCoreApplication. This way we can find plugins in
the application directory which only becomes known when
QCoreApplication is created. When the user changes the library path
we create a new list of the manually modified library paths and
recalculate it from the delta of original vs. modified paths when
QCoreApplication is created.
The upsides of this approach vs. keeping an explicit delta are:
* We don't need to introduce a separate data structure to hold
the added/removed status for delta items or the information that
the whole list got replaced.
* The lists never get larger than the the real library paths. An
explicit delta would have to record all modifications.
* I don't think the delta replay algorithm we would have to do
anyway could be made much more compact than the one this change
introduces.
Of course, if the user actually changes anything, the list is
duplicated. Considering that this is a rarely used function and
that we would have to save some extra information anyway, I think
we can live with this.
Task-number: QTBUG-38598
Change-Id: I3bfbbd1be62dd5804dcc7ac808b053428a4e3149
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is low-hanging fruit, for two reasons:
1. The implementation is dead-simple (unlike, say, in QList).
2. It's completely transparent to the QVector user (unlike,
say, emplace_back, which can only be used inside an ifdef).
Change-Id: Iaf750100cf61ced77aa452f0e4e3c4ec36b29639
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The overload was added for NokiaX86 and RVCT and is bound for
removal.
Task-number: QTBUG-47260
Change-Id: Ic67cee8769847956e16cd0470ebcd663a9e98a40
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Long-lived threads started by Qt itself can now receive events even if
QCoreApplication hasn't been created. This is required in all threads we
start that will handle events, unless we're sure that the thread will
exit before the global application object begins destruction.
Otherwise, those threads will have race conditions dealing with the
event delivery system trying to call the QCoreApplication::notify()
virtual while the object is being destroyed.
Change-Id: I27eaacb532114dd188c4ffff13d4ad2a4bb443e6
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When running the test, one gets the impression that it hangs.
Add some debug output including time to show what happens.
Change-Id: Iac6b4f0518ecec62169bf2269a0a8ec9192da570
Reviewed-by: David Faure <david.faure@kdab.com>
On Windows, having read-only files in a directory can cause removal
to fail. When file deletion fails, check on the permissions, set
write permissions and retry.
Split apart code paths by OS in tst_QDir::removeRecursivelyFailure();
deletion of the read-only directory on UNIX should still fail.
Change-Id: I36e54be5229a7b552e90fd5f42722b868fa0b6ee
Reviewed-by: David Faure <david.faure@kdab.com>
An object that throws in its constructor cannot be reentered. This
violates both C++11 and C++98. It's also a regression from MSVC 2013.
The unit test is renamed to indicate what it really does, as opposed to
a misleading name that was probably a "thinko" on my part.
Task-number: QTBUG-47224
Change-Id: Ib306f8f647014b399b87ffff13f132436d0578ef
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
QTemporaryFileEngine does not store the pattern, so it needs to get it
again from QTemporaryFilePrivate prior to reopening the file. It's
possible to lose the pattern when remove() is called on the object.
Task-number: QTBUG-46156
Change-Id: I66a35ce5f88941f29aa6ffff13dfc7f83d4fa3a2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Make the name of the signal and the name of the getter unambiguous,
which in turn allows the easy use of Qt 5-style connects.
[ChangeLog][QtCore] Deprecated QProcess::error() signal in favor
of new QProcess::errorOccurred() one.
Change-Id: Ic5bcf7d6878e6985f1b4fed9dbe247527d13758c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
