It's a const parameter, so no sense copying it.
Change-Id: I4a673a6a60af9bfe7cb61ce28de2aa295fa1d069
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make it const, initialize it instead of assigning, consolidate testing
of it round some #if-ery.
Change-Id: I2efbf58292a0edd2ceb3da8d3cc16246e84a3bac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Such mappings are ill-defined in the presence of daylight-savings time
(DST); at its transitions, you need information about whether DST is
active or not to determine the correct UTC value. Existing code did
not have a way to be told that hint, so could not be correct.
Fixing this required changing the (thankfully private) APIs by which
QDateTime accessed QTimeZone's information stipulated by zone time.
In QDateTime, this required propagating the needed hint, when DST
status was known.
QAndroidTimeZonePrivate overloaded QTimeZonePrivate::dataForLocalTime
with an implementation that works whenever !hasTransitions(); the base
implementation handled this case lamely, so I've moved the Android
implementation there, to have only one place for both re-writes.
Amended tst_QDateTime's expected failures; passing a date and time to
the constructor *is* ambiguous when the moment indicated is in a
transition. I have changed which way we resolve that ambiguity.
Added round-trip test of QDateTime's fromMSecs/toMSecs (but as a
QTimeZone test, since that's what's actually getting tested), based on
a test-case from Marko Kangas. Initially failed for various zones,
each at one hour-offset; and, on some platforms, for some zones, at
all offsets. These last revealed that a platform may claim to have
zone information yet, for some zones, lack it (or have very incomplete
information). In each case, despite this, the platform does give
offsetFromUtc(). (The test also found another pre-existing bug on
Linux; fixed in an earlier commit.)
To accommodate these gaps in transition data, the transition-based
code now falls back to the offsetFromUtc()-based code (used when there
are no transitions) if it can't find a previous transition (which, in
any case, it needs to do its job).
Task-number: QTBUG-56460
Task-number: QTBUG-56397
Task-number: QTBUG-52284
Change-Id: I2f7422a9e9d3767940b1901d887c6a2c1f36ac9f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Namely: decltype(). Ideally we'd want C++17's template constructor
argument deduction, but instead use the C++11 solution: a factory
function. This enables using things such as lambdas in the container
argument.
Change-Id: Idba64d8069d15bbafe54cfdebe24b1fba1eb8d0a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The ARGB32PM code-path doesn't have enough precision to accurately
render ARGB32 images, but the RGB64 code-path does. Since this is
already a slow configuration and the most costly part is the conversion
we can switch to the more accurate code-path for little cost.
Task-number: QTBUG-55720
Change-Id: Ifa0afba8d8cc0c2f699bb91f51726f4ee5228f3e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Throw out unused code and simply format table to only care about bpp
and use it consistently for all bpp.
Also makes QImage use the 180 degree memrotate, and fixes the tiled
packed qt_memrotate270 so it can be put to use.
Change-Id: If4ef1666fca960ce8e4ce32d85dc5f347b6986f4
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
This new API addresses the use case where we want to replace
a widget by another one inside the splitter. Up to now, the
way of doing would include removing one widget and add the
new one at the same place. However, this triggers a series
of resize and paint events because of the successive changes
in the splitter's children leading to a relayout of the
remaining children.
The new widget inherits the same properties as in the previous
slot: geometry, visibility, and collapsed states. The previous
widget, returned by the function, loses its parent and is hidden.
Change-Id: I3dddf6b582d5ce2db8cff3c40bc46084263123ac
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Also remove references to WinCE in comments.
Change-Id: I175e0ba5f9597b09532c507497a51a55f9e0b5c0
Task-number: QTBUG-56853
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The aim of this patch is to allow the configuration of the connect
timeout used by QAbstractSocket that is currently hardcoded to 30
seconds.
Using QNetworkConfiguration for this allows to adapt the timeout per
network configuration (e.g. 2G vs wired lan)
[ChangeLog][QtNetwork] The connect timeout from QAbstractSocket
is now configurable through QNetworkConfiguration.
Change-Id: I1dc4051be2c74f925f7a9e0a9ccef332efc2e370
Reviewed-by: Lorn Potter <lorn.potter@canonical.com>
Turns the two set of tables in QDrawHelperGammaTables into two
QColorProfile classes that use similar structures and can be reused for
other gamma correction.
At the same time clean-up and improve the comma-correct blending code
to use the new profiles and QRgba64 precision.
Change-Id: I302bd87a5c836e1010fff6d633eeb56fd4ae2ff0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Analogous to QWidget::setAttribute(), introduce an API to easily
enable/disable a single window flag without having to resort to
w.setFlags(w.flags() | Qt::NewFlag).
Change-Id: Ib0f7254a34c8d884cdec181c41b99e5ef035d954
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
when the file's effects are discarded, the mention of the file should be
as well.
Change-Id: I894b7e2b887dd34d18533b197bfa9d0d84d647e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We can not improve the result from JSON parsing without changing API,
so instead recalculate the line and column based on input and offset.
Change-Id: I54149233f71023aa5d30deff854d6f3406c5c48c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Do not consume white-space after a token before the token has been
parsed, otherwise we end up with misleading offsets. This also fixes
a wrong error of illegal number in several cases.
Change-Id: I492ca4de0346a1d0ab73b1c23d7a72dba812664c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change qtConfig(opengl(es2)?) to qtConfig(opengl) as that covers
the case without any regular expression.
Change-Id: I935e3150f87e195e8bd3d0e55b4ed43572b131cf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The test created a Windows shortcut (.lnk) and checked on its existence.
It was not found in the first test since QFileSystemModel returned
the resolved file name (linktarget.txt). When fixing this by querying
QFileSystemModel::fileInfo()::fileName(), the 2nd test failed since
shortcut files are not considered system files.
Amends change 3b093034b6.
Task-number: QTBUG-53890
Task-number: QTBUG-20968
Task-number: QTBUG-29403
Change-Id: Iec58b52532b44d12759eaa6c8d63a8a4dc8d1bc3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the autotest was also broken, because it was created by pasting the
bogus message into the result ...
Change-Id: I02b8663b96c7d96cdb3c19639e2213e49fd2bcec
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Tests are not supposed to write into the build/application directory,
but rather should output to the temp directory.
Change-Id: Idcdf51226a2d547514aea2fbb2054998d8a3437e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Add better boundary checks and catch (hopefully all)
cases where invalid binary JSON could cause crashes.
Change-Id: I206510b7c5e3ba953802a5f46645878e65704ecc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
On Mac, we use QComboMenuDelegate specifically as
item delegate for the popup list. It happens that
the order of resolving the font for each item
individually would prioritize QComboBox's font
instead of whatever the assigned model's FontRole
would specify.
The fix only requires checking whether FontRole is
valid before falling back QComboBox's properties.
Change-Id: I7208ad1911b30cc52c826c1884a1e19f5acd9fb4
Task-number: QTBUG-56693
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
No-break-spaces should not be counted in the space data, but rather
be treated as any other non-breakable character. We were already
taking care of this in the loop we reach if the item starts with
a character which isn't whitespace, but there is a second loop for
items that begin with whitespace characters.
The result of this was that in certain circumstances where you gave
the nbsp its own format and made the line wrap, the previous line
would count an extra trailing space and it would swallow the first
character in its following line.
[ChangeLog][QtGui][Text] Fixed a bug where a no-break space would
sometimes cause the first character of the containing line to not be
displayed.
Task-number: QTBUG-56714
Change-Id: Idd760a389052e6de70f6cc397122b217987fa5f2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Any other use than for enums should use std::is_[un]signed. Make this
explicit by renaming the type traits.
Change-Id: I494158563c95c710e710d0d337f4e547006df171
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since the macro is now just a wrapper for std::is_enum,
its use is also deprecated.
[ChangeLog][QtCore][Global] Q_IS_ENUM is deprecated.
Use std::is_enum<>::value instead.
Change-Id: I09b9f4559c02c81f338cace927873318f2acafde
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QLabel already does that for QPixmap, so just do the same for
QMovie's current pixmap.
Task-number: QTBUG-48157
Change-Id: I7b26460f778e56ff017a5efd433f8929f30e4b41
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Remove most type traits from qtypetraits.h, but keep the custom
implementation of is_signed/is_unsigned. This gets rid of
BSD-3 licensed code from Google in a public header (hugh!).
The custom implementations for is_signed/is_unsigned are kept
because the implementations in gcc's standard headers do not
work as we expect for enums - both is_signed and is_unsigned
always returns false there - see also
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=59027
[ChangeLog][QtCore][General] Qt now relies on type traits from
the C++ standard library.
Change-Id: I3f2188b46949f04ca4482a6ac9afd3482103f0e1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Adds a few missing parts of the conversion from QVariant to QJsonValue
after the introduction of the nullptr QVariant. The conversion the other
way is already implemented.
Change-Id: I8b25dec4b476c4761c5098a60944ff11c36f8bec
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
We were throwing away important information by claiming that all
fonts support all the standard sizes in QFontDatabase on Windows
This caused the font dialog to list unsupported sizes for bitmap
fonts, unlike the native font dialog.
We would also claim to support creating bitmap fonts at
unsupported sizes, which would lead to
1. QFontInfo(font).pointSize() would return the requested size,
not the actual rendered size.
2. Bitmap fonts created at 64 pixels and higher would be invisible.
On Mac, there are no system bitmap fonts, and the use is not very
common, but installing some bitmap fonts on the system, it does
seem to ignore the sizes supported in the font and just displays
the standard list instead, so we keep the current behavior there.
[ChangeLog][QtGui][Text] Fixed list of supported sizes for
bitmap fonts on Windows.
Task-number: QTBUG-56672
Change-Id: Idbec2db9eb3381ab5ddf6259bd2befcba9b93564
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When no central widget has been set, calling takeCentralWidget should
just return a null pointer instead of crashing.
[ChangeLog][QtWidgets][QMainWindow] Fixed crash using takeCentralWidget when
the central widget was not set.
Task-number: QTBUG-56628
Change-Id: I240ccf4caa41d2716a78851571fbfbf444a4922e
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This is second attempt of change cd26e66c2e
This allows us to not have conflicts between the point ids between
different devices for QtQuick pointer handlers.
We do this in QtGui because we can then safely compare point ids from
QTouchEvent::TouchPoint and QQuickEventPoint.
(Point ids that QtQuick pointer handlers use will be based on the point
ids provided by QTouchEvent::TouchPoint::id)
[ChangeLog][QtGui][QTouchEvent][Important Behavior Changes]
Touch point ids are now unique even between different devices. As a
consequence of that, you cannot anymore assume that
QTouchEvent::TouchPoint::id has the same value as given by the native
platform nor the same value as given by synthesized touch points.
Change-Id: Iad2fd8c6a43ccc571a227a01134a1e8f829dfaf4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Same behavior as QWidget, and allows platform plugins to maintain order of
native windows based on the QWindow hierarchy, instead of having to manually
keep track of window levels.
Change-Id: Iacc7e9ee2527f0737c9da6debc7cec101064f782
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Apparently, the CI can run something over 1000x slower than on my
machine. We're getting over 100 ms delays in operations that shouldn't
have taken more than half a millisecond. The last report was of 136%
over budget, so I multiplied the resolution by 4.
Change-Id: I9093948278414644a416fffd1474406967b2a6ee
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The file descriptor has been closed and this test is checking if we get
EBADF.
Change-Id: I33dc971f005a4848bb8ffffd1478eaffd99aa2e9
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Then we need to check if the current active (or focused)
window has any menubar associated. In case there isn't,
and the menubar has no window associated, then we should
update immediately.
The previous condition is still valid.
Change-Id: I4532ccc87354d91c76b53f5433dc3944b9e29584
Task-number: QTBUG-56275
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
This will be done by all POSIX APIs for strings coming in that way, but
because other code (like NSWhateverViews) will most likely return
decomposed form, we make sure that those are in composed form too.
Task-number: QTBUG-55896
Change-Id: I065e11cee6b59706d4346ed20d4b59b9b95163b8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
With the current API it is not possible to reset the
index into -1. We have setClean() method, but
we are lacking setDirty(). This is needed
in case when the document has changed outside
of the editor and nothing has changed
in the undo stack history. In this case we
don't know the state of the file modified
externally so we need to mark that editor's
contents is different from the file contents
and undoing or redoing commands can't bring
the editor to the clean state.
This may also be useful to call it when
we created a new document and haven't saved
it yet or when the document was restored
from backup file.
Task-number: QTCREATORBUG-17048
Change-Id: I64e2052b3559299e0b6939831557a07a59a851b6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Consistent with other Unix platforms, and internally consistent between tests,
as a lot of tests were already applying CONFIG -= app_bundle manually.
Change-Id: Icd2b7e1c08015b26137af60ff82fddbc753f0ff4
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This completely over-engineered piece of code has a hierarchy of
Operation subclasses encapsulating but three actual operations
on a QWizard.
Because these operations and their containers were all allocated
on the heap, but never deleted, asan went crazy and reported over
50 leaks (not the record so far, but a (distant) second).
Since these collections are passed through addColumn/QFETCH, too,
it's nearly impossible to track their lifetimes. So instead of
trying, delegate that to the runtime, ie. pack the Operation
objects into QSharedPointer and pass around those instead.
Change-Id: I8a0fe7a60cd30aed618667affaa030e80cf2b1ac
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Store QGraphicsItems that are either not added to a scene or
removed from it again and that are also not children of other
items - iow: those that were leaked, even on successful runs
of the tests, in either a QScopedPointer, or, where that'd
cause too much churn due to adding of .data() calls, back the
pointer by a stack-allocated object.
This fixes the remaining leaks reported by GCC 6.2.1's ASan on
successful runs of tests/auto/widgets/graphicsview/qgraphicsitem.
Change-Id: I61c3a1cd39b9e96e83c5d7b8cf392e0b26ecbaf0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
The new takeRow() functions return a pair of pointers to
QLayoutItems and, as the name particle 'take' suggests,
releases ownership of these layout items. Which in turn
means that the caller of the function is supposed to deal
with them.
This was not done here.
To fix, write a RAII class that takes ownership of the
returned layout items, deleting them when it goes out of
scope or gets a new value assigned (only move special
member functions are implemented, making the class move
-only).
Deleting the QLayoutItems is not so easy, though:
QFormLayout has a special function for clearing the
QLayoutItems out, so it appears that just calling their
destructors is not going to fly (though I don't know off
the top of the head why that should be a problem).
Solve this, for now, by adding the layout items back into
a temporary QFormLayout for destruction.
Change-Id: If862989207b20f1e3f757c19ec9d498c4491184f
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The usual:
- delete return values of QLayout::takeAt(), replaceWidget()
- delete styles
- delete top-level widgets
- delete actions
Either by naked delete, QScopedPointer or allocation on the
stack instead of the heap.
This fixes the remaining errors in GCC 6.1 Linux ASan runs of
tests/auto/widgets/kernel.
Change-Id: I8cc217be114b2e0edf34ad8d60dbf722f900bb7f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
