std::nullptr_t is nullary: it accepts only one value, nullptr. So we
don't need to read or write anything. This commit simply adds the two
operators that allow generic code to operate on std::nullptr_t if
required.
This commit also adds the actual use to QMetaType::load/save, even
though there's no change in behavior.
[ChangeLog][QtCore][QDataStream] Added operator<< and operator>>
overloads that take std::nullptr_t, to facilitate generic code.
Change-Id: Iae839f6a131a4f0784bffffd14aa37e7f62d2740
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Backtrace logging tests were not passing for arm. Added compile option
-funwind-tables to support backtrace on arm.
Task-number: QTBUG-59966
Change-Id: I5e2443b1e3a644a239dab68db990e75ae8fade24
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Widgets in platforms offscreen and minimal don't get focus back
automatically after hiding focused window. Extra activateWindow
is needed.
Task-number: QTBUG-59966
Change-Id: Iaf3d4e60483c4b2600472af199f7a7cd51b3fa6e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
- Alignment test was not compiling or passing on GCC / arm
- Using C++11 alignas() enforces maximum limit for the alignment, which
at least on GCC / arm is __BIGGEST_ALIGNMENT__ multiplied by 8
- On GCC 6.2.0 / x86_84, maximum alignment accepted by alignas is 128
- On GCC 5.3.0 / arm, maximum alignment accepted by alignas is 64
- This change calculates biggest tested alignment on ARM targets
and compilers supporting alignas() to the value calculated
from __BIGGEST_ALIGNMENT__
Task-number: QTBUG-55492
Change-Id: If2b70000ff9cdc5ae8c5a00e39f79efcc6ba1221
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTBUG-43818 does not affect only Android, it can be reproduced also
with qemu.
Change-Id: I6364c09b3c7f860b34899e26056ad562b7c338f2
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Qemu does not report /proc/self/maps size correctly. Added expected
failure for it
Change-Id: I4019884702b8f9a33717b02e79c9e0c042b2449f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Function if_indextoname fails on qemu because SIOCGIFNAME is not
supported. Expect failure if emulation is detected.
Change-Id: I53b41286d82458661e7fa723af385f323582ce7e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If we do not the fontDef of the multifont will be the default 0.
Task-number: QTBUG-59443
Change-Id: Ib223517975b2a57b2371e309d12cd8f918d30825
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
QOpenGLWidget is not supported on all platforms. Skip tests on those.
Change-Id: I0f9500553427903f20d248acaa20803276e3ab00
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The SHA3 family is a modified version of Keccak. We were
incorrectly calculating Keccak (and even *testing* Keccak!),
but claiming it was SHA3.
To actually calculate SHA3, we need invoke Keccak on the original
message followed by the two bits sequence 0b01, cf. §6.1 [1].
[1] http://dx.doi.org/10.6028/NIST.FIPS.202
[ChangeLog][QtCore][QCryptographicHash] QCryptographicHash now
properly calculates SHA3 message digests. Before, when asked
to calculate a SHA3 digest, it calculated a Keccak digest instead.
Task-number: QTBUG-59770
Change-Id: Iae694d1a1668aa676922e3e00a292cddc30d3e0d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Two changes are needed to pass tst_Selftest on QEMU
1. Pass QEMU specific env variables to the subtests
2. Ignore output on stderr on some tests when running on QEMU
Change-Id: Ie1f722fd183aac5973e87d408005e06cbafcde17
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Unix mmap(2) system calls do allow for mapping beyond the end of the
file, though what happens after you try to dereference the pointers it
gives is unspecified. POSIX[1] says that implementations shouldn't allow
it:
The system shall always zero-fill any partial page at the end of an
object. Further, the system shall never write out any modified portions
of the last page of an object which are beyond its end. References
within the address range starting at pa and continuing for len bytes to
whole pages following the end of an object shall result in delivery of
a SIGBUS signal.
However, Linux allows this in read-write mode and extends the file
(depending on the filesystem).
Windows MapViewOfFile never allows mapping beyond the end.
[1] http://pubs.opengroup.org/onlinepubs/9699919799/functions/mmap.html
Change-Id: Ie67d35dff21147e99ad9fffd14acc8d9a1a0c38d
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QWidget::updateWhileMinimized has been failing on Ubuntu 14.04
and was already blacklisted there. Now we extend it to cover Ubuntu
16.04.
Task-number: QTBUG-46116
Change-Id: I6758657cca46bb4c76cddb0298f9b87b8a43655b
Reviewed-by: Liang Qi <liang.qi@qt.io>
Mixing different protocols on client-server sockets works differently
on 10.11, making previously successful handshakes failing now.
Failure is specific to 10.11 with SecureTransport.
Change-Id: I35374b40fa3d167802775b526cf6465ae78749cf
Task-number: QTBUG-48860
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
GCC bug 68949 causes tst_QGraphicsGridLayout and tst_QGraphicsLinearLayout
to fail on 5.2.x/5.3.x: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68949.
This change adds aggregate initialization to QSizeF arrays to work around
the bug. The bug was discovered when compiling and running tests on ARM
with GCC 5.3.0.
Change-Id: I9ecf7b032b6ca1477c29dca3bd7d0ec8d69a0454
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QEMU does not support all syscalls needed for udp socket testing.
Skipped tests that can't pass on QEMU.
Change-Id: I40882207a47cfafbc3becb3dff8e7cead9676255
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously we were always setting SpdyWasUsedAttribute for SPDY/HTTP/2/HTTP/1.1
(true/false) which is confusing. Now if HTTP2AllowedAttribute was set to true on
a request, we set HTTP2WasUsedAttribute. Otherwise, as we did before, we're setting
SpdyWasUsedAttribute.
Change-Id: I0c44cfb5469fef0c12719baa951197ee2accee4a
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Make it possible to blacklist the (newly created)
quitOnLastWindowClosedMulti() if all else fails.
Task-number: QTBUG-59088
Change-Id: I8c143a2017e7aefaf6cad6ada9c1464d40c952e7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Only test for xcb specific sub-features if xcb is available in
the first place - not the case with Boot2Qt builds.
Change-Id: Iad49648ce1c8781d0c7bb2b2dcd4b7834434d51d
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Instead of the never-ending blacklisting of "broken" drivers, simply switch
to always choosing a byte ordered QImage format with OpenGL ES, and keep
on using the (one and only) spec-mandated GL_RGBA/GL_UNSIGNED_BYTE combo.
There is nothing broken with not supporting BGRA for glReadPixels even when
GL_EXT_read_format_bgra (an out of date, pre-2.0 extension that got folded
into the spec to begin with) is present. We do not have a good way to tell
if BGRA_EXT is supported for glReadPixels or not, so just skip the whole
problem altogether.
Task-number: QTBUG-59283
Task-number: QTBUG-59303
Change-Id: I9f0605380923bd3b3ffdeb80f5c172d3e4cc7927
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
- Test tst_LargeFile::mapFile fails on Qemu for files over 4Gb.
Fixed by limiting maxSizeBits to 28 (must be n*4 and < 32).
- Bug QTBUG-21175 is also effective on ARM targets. Fixed by
expecting failure also on ARM.
Change-Id: I9103727e618a17259b4785ec8c284f3bb60ebea7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Ensures that numbers representable as 64-bit integer
are not printed using exponent notation.
Some JSON implementations such as the one of the Go
standard library expect this in the default
conversion to int.
Change-Id: Ic3ac718b7fd36462b4fcabbfb100a528a87798c8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix the condition in QWidgetPrivate::resolveLocale() to decide whether
to propagate locale: make it match setLocale_helper()'s condition when
deciding whether to propagate to descendants. This lead to a
QDateTimeEdit's calendar popup not getting told what locale to use
correctly, unless we setLocale() on it overtly, which then blocked
propagation of locale changes to it unless QDateTimeEdit manually
propagated the changes.
Fix the documentation of WA_WindowPropagation to mention locale as
also being propagated (which it was in several places, only neglecting
this one in resolveLocale).
[ChangeLog][QWidget][Qt::WA_WindowPropagation] Propagate locale
consistently, along with font and palette, within the widget
hierarchy. Previously, locale was propagated on ancestral
setLocale(), but not on creation of the descendant.
Task-number: QTBUG-59106
Change-Id: I92270f7789c8eda66a458274a658c84c7b0df754
Reviewed-by: David Faure <david.faure@kdab.com>
RFC6125 section 6.4.2 specify we need to convert the IDN to ascii
before comparison. Note that we don't need to toLower anymore
because toAce takes care of it.
Section 7.2 recommands that we dod not attempt to check for wildcard
character embedded within the A-labels or U-labels of an
internationalized domain name. So we reject names that contiains a
'*' but starts with 'xn--'.
Change-Id: Ib0830520a1f82bbf9fd11818718277a479527ee3
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test has been observed to be flaky, printing warnings
"Rubber band has different geometry". Output the geometries.
Task-number: QTBUG-59641
Change-Id: I6c209f2a98a07655e8523c012c5562d602d217ad
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
If the respective modules aren't available we cannot build the tests
and examples. We drop the qtConfig(opengl) requirement for the opengl
examples as
a, we would need to make the QtGui configuration available for that to
work, and
b, we should not add too much detail to the tests and examples build
configurations. Checking each test and example for every feature it
uses would be too much.
Task-number: QTBUG-57255
Change-Id: Ifb043c81ec9e5c487765297bd65704812cd281fc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
CustomTextWidgetIface marked its text() method as an override;
DropOnOddRows marked its canDropMimeData() as an override; each
neglected some other methods that are overrides. Convert
Q_DECL_OVERRIDE to the keyword in affected classes, to match.
Change-Id: I78b38e20a81e3e6aab282a1cb3d70cdf8a5f4135
Reviewed-by: Alexander Volkov <a.volkov@rusbitech.ru>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
mkdir(data2) depended on mkdir(data1) being run before, or it would
fail. In addition, the rmdir() test required the equivalent mkdir() test
being run before. So drop these annoying dependencies and make the tests
cleaner by having clear separation of the test data and merging the two
tests into one
The entryList() test still depends on the testdir being clean: it will
fail if mkdirRmdir() previously failed.
Change-Id: Iaddbecfbba5441c8b2e4fffd14a3e35972d2a3d8
Reviewed-by: David Faure <david.faure@kdab.com>
We don't load and save pointers usually because the pointer value cannot
be guaranteed to remain across program invocations. However, nullptr is
an exception: a null pointer is always a null pointer.
We don't actually have to read or write anything: there's only one value
possible for a std::nullptr_t and it is nullptr.
[ChangeLog][Important Behavior Changes] A QVariant containing a
std::nullptr_t is now streamable to/from QDataStream.
Task-number: QTBUG-59391
Change-Id: Iae839f6a131a4f0784bffffd14aa374f6475d283
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Task-number: QTBUG-59218
Change-Id: Ic839a36af1ecab39da0c3394c34181b6717e24e2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QUrl::isRelative(str) would be false for such files, so first check for
file existence before doing any URL parsing.
Change-Id: I51b6229251ad94877ac408b2f8018456d3e10a36
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When a text block is empty, and we are adding preedit text to it,
we need to merge the format of the preedit text with the current
format of the cursor, otherwise we will use a default format and
then suddenly switch to the proper one when the text is committed.
The reason this becomes a bit complex is that there are no rules
preventing someone from using several ime attributes to specify
formats for isolated parts of the text, and no rules defining the
order of such attributes. So even if the common case is one
text format attribute for the entire string, we need to make sure
we also handle the other cases gracefully, e.g. when we are setting
different formats for different substrings and then providing these
out of order. To make sure we have these corner cases covered, we
also add a set of autotests.
[ChangeLog][Qt Widgets][TextEdit] Fixed initial char format of
input method text as it is in pre-edit mode.
Task-number: QTBUG-59196
Change-Id: I1e37928e3bd1395fec1b5591908d4c69b84eb618
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
