For OnFieldChange and OnRowChange, inserting rows should not be
allowed if there are pending changes in cache.
Change-Id: Ia794332959a35a1de87e798ba1a74ace3dfae68f
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
For OnFieldChange and OnRowChange, before submitting new changes,
setData() and setRecord() attempt to submit pending changes and
revert them upon failure. However, they fail to consider that
reverting pending insertions removes rows from the model. As a
result, the new change can be applied to a row higher than intended.
One possible solution would be to adjust the targetted index for the
removed rows, so that the intended row is affected by the new change.
But this still causes the strange editing experience as rows jump
up just as they are being edited.
It does not seem right in the first place for the model to initiate
reverting changes. It should be up to the application to decide what
to do when data cannot be committed. In particular, setData() and
setRecord() should not have the side effect of reverting already
pending changes.
The chosen solution is simply to refuse new changes that don't make
sense for the edit strategy. For OnFieldChange, flag() will
indicate read-only when editing is blocked by a pending change.
Since setData() and setRecord() submit data immediately for
OnFieldChange, it no longer makes sense to resubmit changes
automatically before a new change.
For OnRowChange, setData() keeps the behavior of automatically
submitting a pending row before starting on a new row. This is
historical behavior and is probably motivated by the fact that
QTableView does not automatically call submit() when editing leaves a
row. The obvious shortcoming of this is that the last row to be edited
will not be submitted automatically. It also prevents us from flagging
rows other than the pending row as read-only.
For OnRowChange, setRecord(), being row-oriented by nature, should
submit the change immediately rather than waiting for the next call
to setRecord(). This makes setRecord() consistent with insertRecord().
Change-Id: Icb4019d8b7c53a7ee48f8121a7a525e8bc35d523
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
The define is removed and only added an include.
Change-Id: I85090023cb9eb33f83ccc7fe2ab69556b4ff89fb
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Define NOTIFYICON_VERSION_4 if it is not already defined.
Change-Id: Ic432cbebf18f8b1e8b4727659dcedd7063e126ee
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
In QTBUG-24807 there is a test case that shows a case when a segmentation
fault happens inside isAncestorOf. When the whole application loses the
focus, e.g. when it is minimized or other application receives the focus,
QGuiApplication::focusWindow() returns a null pointer, so we need to
do a check before proceed inside of isActive.
Task-number: QTBUG-24807
Change-Id: I732c92bb9f236804ede5e89592f6e6609a4711b9
Reviewed-by: Jesus Sanchez-Palencia <jesus.palencia@openbossa.org>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Adds missing QT_NO_ACCESSIBILITY checks where required to build
without accessibility support.
Change-Id: Id98ecdcb9b351289b21dc2d382100d0b63857db9
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Add QCoccoaClipboard which wraps the existing
QMacPasteboard implementation. Remove unused
QClipboard integration code from qmacclipboard.mm
Change mime type cleanup from using qAddPostRoutine
to using an explicit call to destroyMimieTypes in
the cocoa platform integration destructor. This is
necessary to ensure cleanup happens in the correct
order on app shutdown.
Change-Id: Ief0e0d996b04c8e84e9fd2cd3a17fb5bd73bb761
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The tst_QSharedPointer generate another Process to test some invalid
codes, and it expect that the prcoess will crash and return a non-zero
value.
The process which is a console application was linked to windows
subsystem, and QProcess seems can not get its return value. This
cause the unit test fail.
In addition, when the process crash under debug mode, a debug error
report-dialog will appear, which is very annoying, so I suppress it too.
Task-number: QTBUG-24160
Change-Id: Ia1c872d4515c83b0aa516bcfe3783f59797d2d49
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Otherwise, you don't have any socket engine handler created when
directly setting a proxy to a socket.
Change-Id: I35cd7f52331672a6d3e7bcdf817c0fe1fd1e7de3
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
We should only query the position for top levels, otherwise trust the
position given in the event.
Change-Id: Ic29f25983af3e2c2f27eeb527c08069435ac938c
Reviewed-by: Laszlo Agocs <laszlo.p.agocs@nokia.com>
There should be a clear QWidget free path for people with no interest in
legacy QWidget functionality. Adding this option to configure makes this
path readily accessible and hence testable.
Change-Id: If87c1063fcf4c46f5280836126c11999feaa9f8a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
There was no development done to make this working on Qt 5
Change-Id: Ia08d53c6680a65cb1e60a30e55caa992eaa54bc7
Reviewed-by: Eike Ziller <eike.ziller@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Made faster by actually waiting for the window to be exposed, using
similar waiting logic as qWait(). Should speed up autotests that use it
quite a bit.
Change-Id: I628c6110a554fdbbf5bed7e91f57c2fe341113ed
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
At least on mac g++ badly wants to copy the event and
cannot use the copy ctor. The sensible solution is thus
to use pointers. This is in line with QCoreApplication::sendEvent.
Change-Id: Icb58852be351ab04ffa17069989d7a07d4b377da
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
According to the new module name convention, QtSql should be replaced
with Qt SQL in documentation.
Task-number: QTBUG-24775
Change-Id: I712ef17c8245d30fe5e3cf879ef6e3e6aa2ff75c
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Since QtPrintSupport does not have access to the internals of the print
engine on Mac OS X (it lives in the platform plugin). We instead use the
NSPrintInfoFromPrintEngine() invokable method in
QPlatformNativeInterface to return an NSPrintInfo* that we can use where
needed, or we use QPrintEngine::property()/setProperty() to communicate
with the engine.
This commit disables the generic UNIX dialogs and CUPS support on
Mac OS X, ensuring that the default format on Mac OS X is the
QPrinter::NativeFormat (previously qprinter.cpp would force PdfFormat as
default on Q_OS_UNIX which is also defined on Mac OS X).
The rest of the changes are straight forward porting. The methods:
extern void macStartInterceptWindowTitle(QWidget *window);
extern void macStopInterceptWindowTitle();
don't exist anymore, so don't use them. QMacCocoaAutoReleasePool also
doens't work, so use NSAutoreleasePool directly.
Change-Id: I341609e5efa53cadf8d174e4b282cbcae93e39e8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Add an invokable method that takes the QPrintEngine (which will
always be a QMacPrintEngine) and return the NSPrintInfo* from the
QMacPrintEnginePrivate. This will be used by the native dialogs in
QtPrintSupport to get/set printer settings.
Change-Id: If1e49027e8f0d505656db51be1f40a23f60e8e57
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
When we need to use PMPrintSession, PMPrintSettings, and PMPageLayout,
get these directly from the NSPrintInfo when needed. This avoids us
needing to keep the settings in sync. The native dialogs can then only
rely on getting a pointer to NSPrintInfo (to be done in a future
commit).
Change-Id: I4720284dcf999e454f86766b4291fbda7bf3c537
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
This is used to create the actual QPrintEngine and to query the system
about printer information.
The QCocoaPrinterSupport actually lives in the Cocoa platform plugin,
so the QCocoaPrinterSupportPlugin uses the
createPlatformPrinterSupport() function in the QPlatformNativeInterface
(since the latter is a QObject). This is done to avoid adding a printing
related virtual function to QPlatformIntegration (since we have plans
to do a new printing API in the future).
Change-Id: I8bf9be668ff8ae1d07840e2af1e0846dc3299334
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Copy qprintengine_mac_p.h, qprintengine_mac.mm, qpaintengine_mac_p.h,
and qpaintengine_mac.cpp (as qpaintengine_mac.mm) from src/gui/painting/
in the 4.8 branch of http://git.gitorious.org/qt/qt.git at commit
e6bd33d4aef0e4538d7918e7ab130624c911b553.
The following changes are necessary to port these files to the Qt 5 API:
- The copyright notice on these files has been updated to match the
header.LGPL template.
- Fix #includes for qprintengine_mac* and qpaintengine_mac*, as some
headers have moved in Qt 5.
- Remove extern forward declarations for functions that no longer exist.
- Remove friend declarations for classes/functions that are not part of
the Cocoa platform plugin.
- Remove QT_MAC_USE_COCOA blocks. Qt is always using Cocoa now, there
is no need to keep the non-Cocoa code paths anymore. The
QMacPrintEngine::shouldSuppressStatus() method was also removed,
since it is no longer used.
- Do not use Qt::UniteClip, it was removed in commit
01b72952c3
- Use QCocoaAutoReleasePool in qprintengine_mac.mm
- Use QPlatformPrintSupport::convert*() functions in QMacPrintEngine,
since we cannot use non-exported functions from QtPrintSupport in the
Cocoa plugin.
- Use qt_mac_image_to_cg_image() to convert QPixmap to CGImageRef. First
convert QPixmap to QImage (cheap, since the Cocoa platform plugin
uses QRasterPlatformPixmap), and then convert the QImage to CFImageRef
using the existing helper function.
- Copy qt_mac_cg_context() to the Cocoa platform plugin from
qmacstyle_mac.mm, adding a note at each location about the
duplication.
- Add qt_mac_QRegionToHIMutableShape() helper. Adapt the Qt 4.x code for
QRegion::toHIMutableShape(), and use this in QCoreGraphicsPaintEngine.
- Add qt_mac_drawCGImage() and qt_mac_get_scalefactor() helper. These
functions are copied directly from the 4.8 branch of
http://git.gitorious.org/qt/qt.git at the same revision shown above.
- Add qt_mac_create_imagemask() helper in qpaintengine_mac.cpp. This
helper is based on the function with the same name from the 4.8
branch of http://git.gitorious.org/qt/qt.git at the same revision
shown above. The correctness of the implementation has not yet been
verified.
Since these files use the QPrinter API from QtPrintSupport, the Cocoa
plugin now needs to link to that library as well.
Change-Id: I90b9bbe201327489ef9e1b3294e68e91ddda27bd
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Remove references to libQtOpenGL, and use QGuiApplication instead of
QApplication
Change-Id: If8f652223492cf758175a260c27b687f3af1c4ad
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
By scanning the properties in reverse order we don't have to save
properties in the list only to remove them later when the occur
again. It's also unnecessary to cache the values since they can
be easily plucked out of decls. Various other tests can be done
once per property instead of once per property occurence in decls.
Change-Id: I81cf60c59efaeed57fc9c12df98279d6cae116cd
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Rick Stockton <rickstockton@reno-computerhelp.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: John Brooks <john.brooks@dereferenced.net>
Use QTest::ignoreMessage() so that the warnings don't appear in the test
output and so that the test will fail if the warnings are not produced.
Change-Id: I418d78819fc9dbfd7da2a8b6c0a1ebfa967347e2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These issues are permitted to go unfixed for ARM and MIPS, for the time
being.
Change-Id: Ibdf33dc42e3de19ef20e9dc50f12f451ea6dbf23
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test has been repeatedly unstable.
Task-number: QTBUG-24796
Change-Id: I603965c0189ad6da0cdf48527c4919c55e1918b4
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Fixes those cases where things would magically link, although they were
everything but LSB compliant.
Also fix a linker error, it seems we need to explicitly link to -lrt,
otherwise, the non-LSB compliant system lib will be taken into account.
Change-Id: I40e278f1c4d2e02084c4c5f15b9bbff8c5901d32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
madvise is not part of the LSB, use posix_madvise instead
Change-Id: I661e8c5aece5a764a2a9032fcfab49241ab96dd8
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The files output by the DITA XML generator now
have .dita on the end instead of .xml, but the
ditamap files still use .ditamap .
Task-number: Mzilla bug - 7291
Change-Id: Idb8b70c5d3f2ac2c4fdf195e385393f7ac68b7ba
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
LSB doesn't define some functionality that we expect on Linux, so
fall back to the generic code.
Change-Id: I19e09908b9e9002140535f159ae0745d7ca80b70
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If there are no bytesAvailable and no reply then the channel
can be closed without any need for this warning.
Task-number: QTBUG-9315
Change-Id: Ifbb1f4732d3173a7807ac5bd0dc78fb5144faaf3
Reviewed-by: Markus Goetz <markus@woboq.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
QTreeView already does this in the exact same way. It's necessary to
call submit() so edit strategy OnRowChange in QSqlTableModel will
work as expected.
Change-Id: Ib430143e8a71f3b0bcd842fcc772cc7ee4525f0a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
In the old implementation, the QPlatformIntegration was asked
for the theme first, so there was no way of overriding that
by a custom plugin. Also, there was a memory leak in case
the platform theme was actually created by a plugin.
QGuiApplication now asks the QPlatformIntegration for a list
of potential theme names first, tries to load them using
the plugin loader and finally invokes a factory method of
QPlatformIntegration in case that fails. The theme is now
owned by QGuiApplication.
In the XCB plugin, the environment variable DESKTOP_SESSION
is queried and appended to the list of themes, making it possible
to load plugins for other session types.
Change-Id: I1a4b4e061815bca16c65b23e591bb7563a3e44e2
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
To create space on stack for a QObject pointer QVariant is not really
essential.
Change-Id: Iaf04a4f77005e33823f0e14bfdc6fe927cb59867
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
The method was reimplemented using QMetaTypeSwitcher. That should
reduce maintenance costs, because types list is populated automatically
now.
Change-Id: I6637f7b928218ce60b2ec7436079a44089f0e00f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Refactor NSWindow creation into createNSWindow and
setNSWindow. This is necessary to support QMacNativeWidget
where we re-use an already created window.
Implement popup window handling. Make sure the window
is displayed correctly and closes when it should.
Take control over window activation in order to prevent
infinite loops involving the QtCreator "cmd-k" window.
Activation events are for now not sent to popup-type
windows.
There is now a different set of test failures: add
and remove some QEXPECT_FAILs.
Change-Id: I229761b59f90c9815b968eacc2cbc9c20cc5047e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
QObjectPrivate::Connection time life should be controlled by
QMetaObject::Connection handle.
Change-Id: Ie7fcd950082a3e6cebc29ecc0622007470914edb
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Store the name of the QPA plugin as platformName.
Change-Id: Id87cab2a189743c0dd727c86080f7d4595a852bb
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
These changes are currently required to successfully build Qt when it is
configured with a namespace via the configure -qtnamespace argument
Change-Id: I9f3ab30579c16085c4d3d05705336b810466c331
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
