This helps alleviate a performance issues where by building iOS based
projects takes a significantly longer amount of time than it should.
Task-number: QTBUG-59136
Change-Id: I77ae12f507725ceb11106b484d73bb7d46e0845c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This is C++, not qmake code. Amends 5fa6438633.
Change-Id: Ie5b88c3a06dbe089948488ea3b4b297a08164113
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
SYSTEM is used for system() calls, while SHELL is used in the target
Makefiles.
Task-number: QTBUG-62985
Change-Id: Ia75d3939c59c98699359421166433e8b4a6ee35e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QMAKESPEC is added in makefile generator,
it is not in INCLUDEPATH.
Change-Id: I2451b3c7b30bc237157e68e5ce9de67f55e784b2
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
When the source file is read-only then it would copy the file with that
attribute set when it is installed. However this will cause a problem
if it is installed a second time. Therefore the read-only attribute
needs to be manually reset before installing and again before touching
the file. Once the process is done then it is set back to be read-only
to preserve the state of the original.
Change-Id: I1c01f418ef3c9bd434acd2c2b8ee695544d7bb35
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
It was already done correctly in the GCC generators, but lacked in MSVC.
Task-number: QTBUG-11117
Change-Id: I5e6c2e4802dbe33c0f15c46a227a08c3f0cc5707
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the replacement value may well constitute the whole output string - this
is in fact common, given this rather typical usage pattern:
BAR = $$replace(FOO, -flag, -otherflag)
this must be considered when constructing the return value.
compare 3c8134958c.
as of now, this is irrelevant, as QString::replace(QRegExp, QString) will
always memcpy the replacement into a detached copy of the target, but one
never knows.
Change-Id: Ia1f271f45023746040fc28ce6d88a6609e05e5c2
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
technically, we should not rely on the i/o classes not storing the
strings beyond the instantiated object's life time.
Change-Id: I0990769b3cf86860184869036c096c531160e9be
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
property values are de-facto guaranteed to be backed by full QStrings,
so there is nothing to be gained from using the raw data optimization,
while doing so risks raw data leaks.
Change-Id: I3d43da9aaadd4d5811c4b1a9d7ac734049da423c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
it's not clear why detaching would be necessary; there is no danger of a
raw data leak here.
concatenating a QStringRef with a non-empty QLatin1String (the only
expected use of this overload) will yield a detached QString anyway, so
this makes little difference in practice.
amends f137957e08.
Change-Id: I521c0e89a8b0c1ae62b1450e81b0ae91a931bcfa
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
no m_tmp is involved any more in this code path; it uses QStringRef.
amends 11d957d043.
Change-Id: Ib272d61edfb150a549c5e6a9a60d53502702e802
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the m_tmp array is a member, so the index toggle for accessing it also
needs to be one - otherwise, odd iteration counts will defeat the
mechanism.
Change-Id: If7a800ed5a4b4168625daf1ebbd5d2d164569d8e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
... in $$basename(), $$dirname(), and contains(). the latter case is
marginal, as it only applies to mutuals which are regexes, which i don't
remember ever seeing used.
QRegExp saves a copy of the matched string, so it's necessary to
alternate between two temporaries to avoid detaching. we already
did that in most places.
Change-Id: I97b8294585c17c76d1756f83971f42cb88353af0
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
in most cases, the main advantage is not using toQString(m_tmp), which
reduces the possibility of raw data leaks. in cases where we used
toQString() without temporary, this is a slight optimization.
Change-Id: Ib343acffd383aa2c4fefab75fb52762fb534dfc6
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When a ObjC++ QObject subclass is listed in the regular HEADERS, qmake
creates a .cpp file. The moc file will then fail to compile, as it
requries ObjC++ headers. Using Q_FORWARD_DECLARE_OBJC_CLASS() can be
used to let the class be parsed by The compiler, but link will still
fail, as the generated methods (e.g. signals) must be built with ObjC++
compiler, in case they have ObjC parameters:
Q_FORWARD_DECLARE_OBJC_CLASS(NSString);
class MyClass: public QObject {
Q_OBJECT
signals:
void objcSignal(NSString * myObj);
};
The canonical workaround for that is including the .cpp file into the
corresponding .mm file. This also offers a compilation speed advantage,
but is somewhat counter-intuitive.
Therefore, we introduce a separate variable which instructs moc to create
.mm files directly.
Task-number: QTBUG-1581
Change-Id: Ia98af58006efd168ea37f3a63c396979e7e81baa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
A macro name ending in R might expand to a string; if this precedes a
string constant, we're juxtaposing the strings. My first parser for
raw strings would mistake it for a raw string instead, ignoring the
part of the identifier before R. Re-worked the exploration of what
came before the string to catch these cases, too.
The backwards parsing would also allow any messy jumble of [RLUu8]* as
prefix for the string; but in fact R must (if present) be last in the
prefix and *it* can have at most one prefix, [LUu] or u8. Anything
else is an identifier that happens to precede the string. Reworked
the parsing to allow only one prefix and not treat R specially unless
it's immediately (modulo BSNL) before the string's open-quotes.
Add link to the cppreference page about string literals, on which the
grammar now parsed is based.
Added a test for the issue this addresses.
Verified that this fails on 5.6, dev and 5.9 without the fix.
Expanded the existing test to cover R-with-prefix cases.
Task-number: QTBUG-55633
Change-Id: I541486c2ec909cfb42050907c84bee83ead4a2f4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The $${TARGET}_manifest.bak file was not removed on "nmake clean".
Task-number: QTBUG-59827
Change-Id: Ia5b636f4917f3e7a2df8d753824b72e63d278005
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QMAKE_LINK_OBJECT_MAX is actually a property of the host, not the
target.
this works around binutil's inability to use thin LTO objects in
conjunction with an MRI script
(https://sourceware.org/bugzilla/show_bug.cgi?id=21702).
Task-number: QTBUG-61335
Change-Id: I90a1334b9c905c433b35546e8f3f3b5089d2c65b
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The strings remember in which file they were created/assigned.
However, this used a non-counting reference to a ProFile, which could
become dangling. If a subsequent ProFile re-used the exact same address,
a string's source would be mis-identified, which would be fatal in
conjunction with discard_from().
Since we actually need only a unique id for comparison, let's use an
integer for that.
Task-number: QTBUG-62434
Started-by: Simon Hausmann <simon.hausmann@qt.io>
Change-Id: I395153afaf7c835d0119690ee7f4b915e6f90d4a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
... and use it when building shared libraries and plugins.
It prevents application crashes in cases when libraries and
plugins are unloaded and their strings are still used by
the main application.
Task-number: QTBUG-51602
Change-Id: I4af79183f18c5ed6142d55af02a36fe4334f3fee
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The attempt at loading these functions at runtime with WinRT always
failed, so stop trying.
Change-Id: I658f552684924f8aa2cafffd14cfc5179ac08498
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Task-number: QTBUG-59301
Change-Id: I2562b862465a52ecc56f551bcdb98fa7279ebfcf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
If these rules are not added to the solution, Visual Studio will
complain, that the project has to be deployed before it can be run.
Change-Id: I6d3fbc949c85b11a92f78e13e2f6a1b92a5cfdc7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The old docs contained obsolete information. Also, the new docs
match the new docs for the other Apple OS deployment targets.
Change-Id: Id773fa2086f291d8a2552fe1b339ec1e13c19d74
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The following variables were not documented:
- QMAKE_IOS_DEPLOYMENT_TARGET
- QMAKE_TVOS_DEPLOYMENT_TARGET
- QMAKE_WATCHOS_DEPLOYMENT_TARGET
Change-Id: I5cfb6c0024d92e943aed882fd01bc2a4f2c7c042
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This deduplicates the code between QFileSystemEngine and QLockFile.
Change-Id: I1eba2b016de74620bfc8fffd14cd005d5fd9beaa
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Also wrap two blocks in braces, since the formerly-else block spreads
across many lines; and split those lines differently to limit length.
Change-Id: Ib89329b11aad6599926f0338d6546f4141d2c002
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
If several Makefiles are used in the same directory (for example, for
multiple projects in the same directory or different build configurations),
they all reference the same object_script, which is obviously wrong.
Change-Id: I9b499ceb6b6bd6058f54b452fa44bfb2313eec26
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This fixes the following warnings when building qmake:
Makefile:359: warning: overriding commands for target `qrandom.o'
Makefile:335: warning: ignoring old commands for target `qrandom.o'
Change-Id: I2c7abbe095862303c1969a70f61b8a57009d44ee
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When generating a project, the directories can be specified as arguments
to the qmake call. As a result files can either be incorrectly added to
the project with a leading slash, or can end up duplicated. By passing
the absolute path with the file, it ensures that the file is added
correctly and no duplicates occur as a result.
Task-number: QTBUG-48342
Change-Id: If774de8d7f5cceca80042a25a3aa4e5b045249da
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This was already done on unix, but not for MinGW.
If the archive already exists, it is appended rather than replaced.
This can cause invalid references when whole-archive linking is used
and some object file that was already linked was deleted.
Change-Id: Ie265371f197d996d57002b248043736544ee641e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
adding shared install paths via QMAKE_LFLAGS in the spec has the tiny
side effect that they are searched _first_, which is generally a really
bad idea - they should be _last_.
for that purpose, introduce QMAKE_RPATHLINKDIR_POST, and migrate all
specs to use it.
QMAKE_RPATHDIR_POST is added for consistency, but not actually used.
Task-number: QTBUG-59457
Change-Id: Iac6cda5e9111ef8cca454a69861fe8408bb40589
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
