The Qt CI system runs the unit tests after installation, but
with the qmake in the build directory. This means that the
installed content is not unit tested. Add an additional cmake
unit test to test the files in the install location.
The new test is marked insignificant for now until the true
effect on the CI system is known.
Task-number: QTBUG-27315
Change-Id: If9f12e88cfc741946cfabc25dbf789a11a2af4b8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Redoing 5704cbc462
This can't work, because the define comes from qconfig.h, not qmake.
Skipping initTestCase and cleanupTestCase when QT_NO_PRINTER is
defined.
Change-Id: I2527c018294b7518a4692f2c93da933848640b5d
Reviewed-by: J-P Nurmi <j-p.nurmi@nokia.com>
Exclude printsupport tests from the build when QT_NO_PRINTER is
defined.
Change-Id: Iedae91666a599f4b77250abc8aac14c256fde34e
Reviewed-by: J-P Nurmi <j-p.nurmi@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
contains(QT_CONFIG,opengl) tells whether Qt itself is able to use
OpenGL, which is not the same thing as whether the QtOpenGL API is
available. Make the check correct; fixes compilation when Qt is
configured with -no-widgets (which also disables QtOpenGL).
Change-Id: Iaa296c2b10650971ef4846f8bc6f44761fadcf7c
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
removed printsupport tests for wince as there
is no print support on wince and removed the special
handling for wince from 4.8 on some tests as the dependent
modules are not part of qt base anymore
Change-Id: I4ffb22da11f98beee1013f775cb5ce4b936d3211
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Switch on most of the tests (all but the bearer tests), marking the two
known failures as insignificant tests.
Change-Id: I17f228a938de1a23eddf897f494bfa4e54338dae
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This will allow the CI system to run the tests. The tests are only
run if cmake is found.
Change-Id: Ie73a56114c151871160bafcbf0b90b2d54620855
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
There are many tests, examples that depends on widgets. This patch
disables some of them if Qt is configured without widgets.
Change-Id: I5460dadca736c54221874adcd518a7021725d90a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
A number of network autotests are unstable in Windows, so don't
generate check target for them as is done for mac.
Once the tests are acceptably stable, this needs to be reverted.
Change-Id: I18262e28ce40eba541aecf3cfb651bff34698ead
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
We want the autotests for the QtWidgets library to be run on Mac OS X as
well.
Change-Id: Ie731b802b64222c84116e2df82f536acf4971565
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The QtV8 library is going to live in the qtjsbackend module.
Change-Id: I72251316163829411dda998b9503ce6f75b3606a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Failing tests are marked with CONFIG+=insignificant_test.
tst_QTextLayout currently asserts, so it has been disabled to prevent
destabilization of the CI system.
Change-Id: I7bd836ee14085689c8a0f0ce8e3c80d81a55eb94
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Currently there seems to be no precise definition of what
an integrationtest is in the context of Qt testing.
To avoid confusion, the tests under integrationtests/ are
moved into other/ (which is effectively where we keep
tests that don't clearly fit into any other category).
Tests can be moved back into an integrationtests/ directory
at a later point, should an unambiguous definition be established.
Change-Id: I3bb289be2dc2aca11b51a8ce8fcc5942f06d6c5c
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The QSql test currently crashes, which can destabilize the CI system
when attempting to re-enable the autotest. Skip this test for now by
disabling the check target for it.
Change-Id: I598f8ca7bce6b6f46daf6a053da5571b62486463
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
These tests aren't actually enabled due to the lack of dbus, but there's
no reason to explicitly disable the check target because of it.
Change-Id: I685008060c8e8d713cd27e7684cf3d474c0cf55d
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
The tst_MacNativeEvents, tst_QAccessibility, and tst_QFocusEvent
tests currently fail, which will block any changes that attempt to
re-enable the autotests. Ignore the failures for now by marking the
tests as insignificant.
The tst_Lancelot for currently crashes, which can destabilize the CI
system when attempting to re-enable the autotests. Skip this test for
now by disabling the check target for it.
Change-Id: Icc1dc77ebb9b7be746606aae04c9abf2480d0c3f
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
This is the first change to re-enable the autotests for the individual
qtbase modules. This means adding subdir.CONFIG=no_check_target for each
module (except corelib) in tests/auto/auto.pro instead of in
tests/tests.pro
QFileSystemWatcher, QIODeice, QSettings, QTextStream, QSocketNotifier,
QVariant, QPluginLoader, QLocale: These tests currently fail, which
will block any changes that attempt to re-enable the autotests. Ignore
the failures for now by marking them as insignificant.
QAbstractItemModel: This test currently crashes, which can
destabilize the CI system when attempting to re-enable the autotests.
Skip this test for now by disabling the check target for it.
Change-Id: Ie5147d5c5cfae5e7d0a495d5c4788ce92fe2e6d8
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Note that the uiloader test has been moved
from qtbase to qttools (see QTBUG-19453).
Change-Id: I326fa0da435701eeaad7026160e3203a27cb3666
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The initial change to eliminate v8.pro was
incomplete - see 803b7d651c.
Change-Id: Ia2c996d247f8b19380363f3e0409d38d3b839fdb
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This change moves utf8/ into corelib, thus
allowing corelib.pro to be deleted.
Change-Id: Ib1b4e0930ac0e116d9bbc242a6dfb63ae5785d19
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
QWS is not supported for Qt 5, so the QWS tests are deleted.
Change-Id: I08837fbd879915bbca9f821fad3551450eb3a1c6
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The qobjectperformance test is a kind
of performance test that asserts that the
time it takes to emit a signal to a certain
number of receivers does not exceed a certain
time.
other/ currently seems to be a sensible place for
such a test. Alternatively, it could have been put
next to corelib/kernel/qobject/.
Change-Id: I5c9461b62984f5806d1f6940123d30ef9f9f5a37
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
v8 may be specified directly as a subdirectory in
tests/auto/auto.pro instead of indirecly referring to v8.pro.
Change-Id: I95d8c788fa67958372795519036cd8aec835b324
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This commit moves the qmetaobjectbuilder test from test/auto/
into corelib/kernel/ since that matches the location in the Qt source.
Change-Id: I0342e8185ce775b0ef71849f365bf54c8fb56da4
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Make the parent .pro files follow the pattern of listing all tests in
one place and then removing inapplicable tests as needed.
Change-Id: Ide1ae98d50dd63cd8c1b4d6fd53135cdff801bc3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The other/ subdirectory should still be built via other.pro.
This was overlooked by Commit 0a208dd413
Task-number: QTBUG-21327
Change-Id: Ie8ebd7dfc5b1dd56ca1b629aa011d160cb563ddd
Reviewed-on: http://codereview.qt-project.org/4526
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This adds Aaron's copy of V8 to src/3rdparty/v8 (as a
git submodule), and builds it as a "normal" Qt library
(without any dependencies on Qt itself).
The library can be added to a project with
QT += v8-private
V8 API headers are available as private includes, e.g.
#include <private/v8.h>
The API is private because we're exposing a third-party
API directly, and we don't want to (and cannot) make
source or binary compatibility guarantees for it.
Since we want the V8 public API headers to be private
headers in Qt, syncqt and sync.profile were extended to
understand a new configuration option, the
@allmoduleheadersprivate array, that tells syncqt whether
all the library headers should be treated as private even
though they don't follow the _p.h Qt convention.
The V8 project files, patches and autotests are copied
from the QtDeclarative repository. The next step after
this commit is to remove QtDeclarative's copy of V8 and
link with QtV8 instead.
Task-number: QTBUG-20963
Change-Id: Ib8820362cdbc8fa662a5e97db841656cf38d1b62
Reviewed-on: http://codereview.qt.nokia.com/3092
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
