the only callers which used non-default arguments are gone now, so remove
the arguments entirely. this also enables us to re-enable result caching.
Change-Id: I62f76e17e531a4eeafddb9b29716ca0a0eb3dbea
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the specs in Option are now only fixifiable absolute paths if an actual
path was passed on the command line - otherwise these are just names,
and we should pass them on verbatim.
Change-Id: I5b3535dadf2d6b2b3116331e6636f6e363a5361f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
if source and build dir are direct children of the common root and we
are shadowing the top-level source dir, there is of course no trailing
slash to match.
Change-Id: I8a34a6a72d16cb21d77d056e037235af9b32a008
Reviewed-by: Davide Pesavento <davidepesa@gmail.com>
Reviewed-by: Andreas Hartmetz <ahartmetz@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The return type of isActiveConfig is a boolean, so return that when
host_build is queried.
Change-Id: I6d1420b49b09e51442c4b2d482e2f19b165081d8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Integrated the checksdk tool into qmake and made
the makefiles selfcontained, so configure make, is now
enough to build qt for wince
Change-Id: I29076702eca2ec23d4d06bb3d5c5cef9d4f95161
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
instead of making the "real" targets depend on the makefiles, add
conditional makefile generation to the targets themselves.
this causes makefile generation to follow the recursion order determined
by the project, which is important when dealing with prl and module pri
files.
a side effect of this is that qmake and make calls are interleaved now,
which is entirely different from a 'qmake -r' run.
on the downside, calling make with multiple targets which operate on the
same subprojects without prior makefile generation will make a mess, as
the qmake calls will be racing. this should be no problem, as qmake does
not generate recursive targets where this would be useful - at least by
default.
it is not sufficient to just order the creation of the makefiles
non-recursively (e.g., by using gnu-specific order-only-prerequisites),
as an interrupted and subsequently resumed build would happily skip the
nested makefiles.
workable alternative approaches would be walking the entire tree in a
pre-pass to ensure makefile presence (which is incredibly slow) or
creating additional stamp files only after recursing and having the
makefiles depend on them (which is ugly).
Task-number: QTBUG-23376
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Change-Id: I88d3e7610215677d362026de316513d3bea04b06
instead of hard-coding platform differences, use a variable.
Change-Id: I20e98811ad5f07429148c6f88aedbabc3ba58fff
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
everything in the projects should be normalized. only the makefile
generators need to adjust it to the native form.
Change-Id: I06a4e997f32134d13949ec4a9dd1b44367aab7cb
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
no point in entering the outdir and leaving the indir.
this doesn't really matter except for the obsolete borland generator,
but whatever.
Change-Id: Ieb4e4c549ebd65f99e4d00819c52822968b060a4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the code above already deals with the differences
Change-Id: Ifb799e46f5187e7bd3d0f0169e868ad267bcfe23
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
no need to define an obscure variable for it. just inline it.
the assignments are left in for compatibility with hand-written commands.
Change-Id: I9bc3914e2c4116f3b8fe00a421ca0f036bb7e214
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
so far it would rebuild the makefiles one level down only, which is
somewhat arbitrary and not really helpful.
Change-Id: I5fe01f379ecc4b210610a674d7df7dfc18131eef
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
that's consistent with other projects. 'qmake_all' can be used for
recursion.
Change-Id: Ie6d620f7a3e0e28d3f2f82f01ca94c2f46137c68
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
$(MAKEFILE) is our own file, and using it would wreak havoc if it was
named anything but Makefile.
Change-Id: I51cae2014a85399b409f18788f864ff2a82e493e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
if a "subdir" project added a project file from the same directory as
itself, "/." would be appended to the path, which is obviously not useful.
Change-Id: Ia733dedb57e568c5cf9a3d5eb29727176a5142c5
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
webkit does some unholy tricks with the ordering of qmake and make
invocations, so it does not work with qmake -r. to make it still
possible to integrate it into the qt5 aggregator project, give it a
chance to "break out" from the recursion.
Change-Id: I926836e44c0e0790cdd90e6b0c8f766dccc33c4d
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
otherwise a cache/config in an aggregator project may unduly hide the
mkspecs/ of the aggregated project from qmake's view.
Change-Id: Idb0b124de071822f8f55463d9f8a4d194ef3130e
qmake will now look for .qmake.super, just like it looks for .qmake.cache,
and the cache() function has a mode to write this super cache.
this allows the creation of aggregator projects like, say, qt5.
a notable difference to the normal cache is that this file is *not* added
as a dependency of the Makefile. this means that modifications done by
later sub-projects will not cause a re-processing of earlier projects, and
consequently that one should be cautious regarding what information to
store there.
another notable difference is that this file is read *before* the spec,
so the spec can use the variables from the cache without resorting to
$$fromfile() & co.
Change-Id: I4807b6d34014261fa9eebd6f0ae128b802d86691
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is the source dir equivalent of .qmake.cache and can be checked
into the repository. it can be used to make project-wide settings, or
just to signal the presence of an mkspecs/ directory.
Change-Id: I5f1cebad2aa2a89e78089341b2051613b6b7a613
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this allows the creation of aggregator projects, like, say, qt5.
this is not expected to have a negative impact, as no project could
reasonably expect a nested .qmake.cache to *not* take effect - in fact,
if the project was processed stand-alone, it would already use it.
Change-Id: I33f2935d309baba7e95465f2fefb8231c4f03eda
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't even complain about trying to use js-based feature files. we have
been doing that for long enough.
Change-Id: Ib58ec204322442c488e8d780989f26b1e32595ed
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
properties are now split into a write location $$[FOO] and a read
location $$[FOO/get]. the write locations are hard-coded and configurable
via qt.conf/Paths as before, while the read locations are configured via
qt.conf/EffectivePaths.
this finally provides a clean solution to the problem that during the qt
build itself tools and libraries need to be taken from somewhere else
than they are installed to.
Change-Id: I956c43bd082afd465e690fe75d0bee3c2c0f7c25
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
make_first really means the same, as the default target is 'first'
which immediately invokes make_first.
as a nice side effect, this fixes ALL_DEPS not being used by the subdirs
template's default target - make_default wasn't special-cased in the
right place, while make_first is.
Change-Id: I946cea3b2dae198eda61d31dbd19c6ccd15deac7
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
returns the list with the order of the elements reversed.
one can easily implement this with existing functions, but this is way
faster and more readable.
Change-Id: I12d306eb9fe58fc332622274ea6b658192529491
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
to be used in system() calls and when assembling EXTRA_COMPILER and
INSTALLS .commands by hand.
Change-Id: Id706cd56aa267a9fb4b14e3416692b4716fafa5b
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
just exposes QDir::fooFilePath() wrapped into QDir::cleanPath()
Change-Id: I7a7644084825fd8092a9910ac20f695c4d9351f6
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
more or less QDir::toNativeSeparators(QDir::cleanPath())
Change-Id: I52deee1e8086559eda5833b387a0cf64d21cbcd9
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
return the build directory corresponding to a given source directory.
this is the identity function if not shadow-building. if input lies
outside the source directory, return empty value.
Change-Id: I2d2a6b1112bd19989fe29cfe19a12d39a0d208c1
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this quotes the elements of a variable in a way suitable for re-parsing
as qmake code.
Change-Id: I0e6ea2478c43b5aeff45f485a48ac8c86705dd4a
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this simply returns the keys of all variables in the context.
Change-Id: I0092f827744fcd257dfb9e7ca664c87c6f1cc763
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is equivalent to unix "touch --no-create --reference <ref> <file>".
QFile has no setLastModified() (even though QFileInfo has
lastModified()), so the implementation is low-level.
Change-Id: I6783e8f2613e168ad0c24e79e7384d5b2e4901ee
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this dumps the contents of a variable into a file. each element of the
variable is considered a line; line terminators are added. all missing
directories are automatically created.
Change-Id: Idafeb873cea64e6705c894b3ab0ef21df69e7170
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this function adds the current contents of the named variable to the
cache. this comprises populating base_vars and appending an assignment
to .qmake.cache. if no cache file exists yet, it will be created in the
current output directory (and inherited by subdirs projects). if called
without a variable name, only create the cache file if missing.
Change-Id: I1e81c2238aa6a5817a6ebbfb022e2b995c349363
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this bypasses the otherwise done insane word splitting
Change-Id: Ia9b8980bc0770de3999544a06d239f55fb34f801
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
don't mess with the qmake cmdline args any more.
Change-Id: I399d87145d31d25e29951b6acd96387a3c7282f0
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
when qmake runs into the new option(host_build) command, it will restart
the project evaluation with a host spec.
the new default host spec is called default-host (gasp!). it is
overridden with the pre-exising -spec / -platform option, while the new
-xspec / -xplatform option overrides the pre-existing default spec.
specifying -spec but not -xspec will set the xspec, too, so the behavior
is backwards-compatible. same for the XQMAKESPEC override read from
.qmake.cache and the environment variable.
the cleaner solution would be adding -hostspec, to be symmetrical with
the override semantics, but that would deviate from configure in turn.
Change-Id: I4297c873780af16ab7928421b434ce0f1d3820da
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
... and followup fixes.
this is not needed any more due to the breaking patch being reverted.
Change-Id: Ia3416fcc16ddece680efbd0322286a601879fa0a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
We are now moving in the exact opposite direction.
This logically reverts commit 059200a44b.
Some adjustments were necessary to maintain the project root stuff.
Conflicts:
qmake/main.cpp
qmake/option.cpp
qmake/option.h
qmake/project.cpp
Change-Id: Ic14fa571cbbfe9ac159f92493e49741d70a87eff
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
