webkit does some unholy tricks with the ordering of qmake and make
invocations, so it does not work with qmake -r. to make it still
possible to integrate it into the qt5 aggregator project, give it a
chance to "break out" from the recursion.
Change-Id: I926836e44c0e0790cdd90e6b0c8f766dccc33c4d
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this is the source dir equivalent of .qmake.cache and can be checked
into the repository. it can be used to make project-wide settings, or
just to signal the presence of an mkspecs/ directory.
Change-Id: I5f1cebad2aa2a89e78089341b2051613b6b7a613
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this allows the creation of aggregator projects, like, say, qt5.
this is not expected to have a negative impact, as no project could
reasonably expect a nested .qmake.cache to *not* take effect - in fact,
if the project was processed stand-alone, it would already use it.
Change-Id: I33f2935d309baba7e95465f2fefb8231c4f03eda
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
properties are now split into a write location $$[FOO] and a read
location $$[FOO/get]. the write locations are hard-coded and configurable
via qt.conf/Paths as before, while the read locations are configured via
qt.conf/EffectivePaths.
this finally provides a clean solution to the problem that during the qt
build itself tools and libraries need to be taken from somewhere else
than they are installed to.
Change-Id: I956c43bd082afd465e690fe75d0bee3c2c0f7c25
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
make_first really means the same, as the default target is 'first'
which immediately invokes make_first.
as a nice side effect, this fixes ALL_DEPS not being used by the subdirs
template's default target - make_default wasn't special-cased in the
right place, while make_first is.
Change-Id: I946cea3b2dae198eda61d31dbd19c6ccd15deac7
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
when qmake runs into the new option(host_build) command, it will restart
the project evaluation with a host spec.
the new default host spec is called default-host (gasp!). it is
overridden with the pre-exising -spec / -platform option, while the new
-xspec / -xplatform option overrides the pre-existing default spec.
specifying -spec but not -xspec will set the xspec, too, so the behavior
is backwards-compatible. same for the XQMAKESPEC override read from
.qmake.cache and the environment variable.
the cleaner solution would be adding -hostspec, to be symmetrical with
the override semantics, but that would deviate from configure in turn.
Change-Id: I4297c873780af16ab7928421b434ce0f1d3820da
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Since we only support XCode 3 and later, then all of the legacy code can
be safely removed.
Change-Id: I9be8555aaa62c716b2277c2b97f41aa02d27ef13
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Properly use from/toLocal8Bit when referring to user data, even file
names.
Change-Id: I8fc7afa2ea570f8b1b1eecf354f01d6dfe0883cb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
219a688ac1 added the version extension
which only occurs on the DLL import library.
Change-Id: Ie913adf039d7f3a9aadf43f4af014289a8aeacbe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Hib Eris <hib@hiberis.nl>
When creating the temporary project object,
Option::output_dir must be adjusted temporarily.
Task-number: QTBUG-22788
Change-Id: Ibf8897a46b63f48b9e33d7e2168b09e559cecec7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Since Windows Vista the resource language must be included to
make the version information visible in Windows Explorer.
Two new variables have been introduced:
RC_LANG (default: 1033) - resource language
RC_CODEPAGE (default: 1200) - resource codepage
Task-number: QTBUG-23218
Change-Id: I29e102d19501e3b7a43d5096fc4806bc38a4d846
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
If VC++ 2010 Express and VC# 2010 Express are installed, then the
installation path is written in two places into the registry.
We're now filtering detected installations with the same installation
path.
Task-number: QTBUG-24956
Change-Id: I401430e7aa81d96c523d8172d2a2e9d40ebdb3ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QStringBuilder will be enabled by default so qmake should build with it.
qstringbuiler.cpp has to be compiled in just for the convertFromAscii
(The alternative was to build with QT_NO_CAST_FROM_ASCII, but that would
be too much work)
Change-Id: I1fbeed7ed8a9d3bc38ef591a687c50644980e2fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this is a complete bastardization of the concept and breaks the (unused)
debugging feature to create proper unix makefiles under windows, but
apparently it permits cross-compiling unix targets under windows.
Change-Id: I4ee95a20e7d6a6b2063ec7aa22f52c1a97d78a77
Reviewed-by: Oliver Wolff <oliver.wolff@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this was a somewhat magic support for sysroots, automatically rewriting
a number of path-holding variables. this was (as usual) completely
undocumented, extremely fragile, and we are coming up with something
better now anyway.
Change-Id: I045910f532cb3efc839ea81c7a48f8db695e4092
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
there is totally no reason to call it unless the project is actually
used for makefile generation, and the excessive calls actually mess up
things.
Change-Id: Idb7912a5404f6054010d2f29cce820a167de4f6f
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
instead of initializing base_vars with the original's vars, initialize
vars itself. this has two consequences:
- there is no need to call read(0) to initialize vars
- one cannot usefully call the complex read() anymore, as that would
re-initialize vars from base_vars
this is much closer to an actual copy than the previous "seeding with
existing project".
Change-Id: Ib007bc5b779aedb680a27329aa578f7c604a4308
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
merge them into before_user_vars. they are evaluated right after another
anyway.
Change-Id: I11859284b363fee01233f6e20989444fef711d0d
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
don't inject the build pass specific variables into the project even
before evaluating the .spec file and the .qmake.cache. they are not
supposed to base configuration on that - feature files should do that
later.
the immediate advantage of this is that base_vars is never manipulated
upfront any more, which allows for cleaner setup paths. also, we can do
more caching of the spec+cache contents.
Change-Id: I19d7f8bec1fb7c3b54121e26794340b287055ebf
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
instead of messing with the Option singleton, add a way to inject
extra config values into QMakeProject.
Change-Id: Ia347dcc38af2c72913e30ebf5c2b4044f93b4f5f
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
instead of being a variable added to the makespec (via qconfig.pri),
QT_SYSROOT is now a property.
the QT_INSTALL_... properties are now automatically prefixed with the
sysroot; the raw values are available as QT_RAW_INSTALL_... - this is
expected to cause the least migration effort for existing projects.
-hostprefix and the new -hostbindir & -hostdatadir now feed the new
QT_HOST_... properties.
adapted the qmake feature files and the qtbase build system accordingly.
Change-Id: Iaa9b65bc10d9fe9c4988d620c70a8ce72177f8d4
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
This adds support for XCode 4 into qmake and also indirectly fixes a
couple of problems that are relevant for XCode 3.2 too
Task-number: QTBUG-17247
Change-Id: I722470ad1854bd740cbbd28ff4956057a0e1906b
Reviewed-by: David Forstenlechner <dforsten@gmail.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
(cherry picked from commit b5871311457ca97816c0abbb8b935570bbfb657c)
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This implements replacements for win32 makefile generators similar
to the replacement functionality in unix makefile generators.
To enable Makefile code generation for replacements in win32 makefile
generators, you must set QMAKE_STREAM_EDITOR to e.g. sed.
When building for win32, sed is normally only available in the
mingw/msys build environment and when cross compiling on unix.
In these cases QMAKE_STREAM_EDITOR is set to sed in qmake.conf.
For other win32 build environments QMAKE_STREAM_EDITOR is not set
in qmake.conf and the replacements Makefile code is not generated.
Change-Id: Ie5de5d517eafaeaa2544f1e972aec3fe11d0a6f1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The QByteArray::operator const {char,void}*() implicit
conversions are a source of subtle bugs, so they right-
fully can be disabled with QT_NO_CAST_FROM_BYTEARRAY.
const char *d = qstring.toLatin1(); // implicit conversion
while ( d ) // oops: d points to freed memory
// ...
But almost no-one ever enabled this macros in the wild
and many were bitten by these implicit conversions, so
this patch deprecates them.
I would have liked to remove them completely, but there
are just too many occurrences even in Qt itself to hope
to find all conditionally-compiled code that uses these.
Also fixes all code that needs to compile under
QT_NO_DEPRECATED (in qmake/, src/tools/).
I984706452db7d0841620a0f64e179906123f3849 separately
deals with the bulk of changes in src/ and examples/.
Depends on I5ea1ad3c96d9e64167be53c0c418c7b7dba51f68.
Change-Id: I8d47e6c293c80f61c6288c9f8d42fda41afe2267
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The libName that is used in pkgConfig files should include the
TARGET_VERSION_EXT.
This is needed because in Win32MakefileGenerator::fixTargetExt(),
the TARGET_VERSION_EXT is added to the library name.
In Win32MakefileGenerator::processVars(), if TARGET_VERSION_EXT is empty,
it is set to VER_MAJ.
On platforms != Windows, TARGET_VERSION_EXT does not seem to be used.
We probably got away with this so far because pkgconfig files generation
for win32 was just added in 4.8 and nobody uses them yet, and because on
platforms != windows the TARGET_VERSION_EXT is not used.
Change-Id: I56f239e389f0ef926030e4c2376cadd92c4f673c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
It was the result of miscoordination between Andreas Holzammer and me,
duplicating the functional change of commit
ea2c9f764f.
This reverts commit 8b7a9b4898.
Change-Id: I9a47746c1c12ca00b2dc5c5d50e99f9bf990e3f7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Disable optimization for getProjectUUID() as it triggers
ASSERT: "&other != this" at qstring.h:720 with -O2.
Change-Id: I51b31d4318ba9be187c186623099171d8f48235b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qmake-generated Makefiles since 4.6 (according to bug report) contain
recursive qmake invocations with absolute paths to .pro files, where the
absolute paths are not escaped.
Task-number: QTBUG-11776
Change-Id: I49772c7d9147efea3bb7b9623c61d92aa0bb6857
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When installing extra binaries the paths where not being escaped,
causing stripping and deleting to fail when dealing with filenames
that contained one or more spaces.
Change-Id: Iba4517b1110f6af30f7e2662cb86024a8b7b81f7
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Lincoln Ramsay <lincoln.ramsay@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this should make the evaluator quite a lot faster. the total win for
qtbase/src is only 6%, though.
i made some effort to avoid that output files get randomized. however, i
didn't bother to keep debug output sorted.
Change-Id: Id9cef4674c0153c11ebbb65cb63bf8c229eb56e3
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
