Commit Graph

33 Commits

Author SHA1 Message Date
Oswald Buddenhagen
16d5b6911f look for .qmake.conf files
this is the source dir equivalent of .qmake.cache and can be checked
into the repository. it can be used to make project-wide settings, or
just to signal the presence of an mkspecs/ directory.

Change-Id: I5f1cebad2aa2a89e78089341b2051613b6b7a613
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:46:02 +02:00
Oswald Buddenhagen
f86f3613a5 find .qmake.cache for subprojects independently
this allows the creation of aggregator projects, like, say, qt5.
this is not expected to have a negative impact, as no project could
reasonably expect a nested .qmake.cache to *not* take effect - in fact,
if the project was processed stand-alone, it would already use it.

Change-Id: I33f2935d309baba7e95465f2fefb8231c4f03eda
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:46:02 +02:00
Oswald Buddenhagen
a07d4f8fb3 remove some symbian cruft
- Option::mmp_ext
- references to dead QMAKE_INTERNAL_ET_PARSED_* variables

Change-Id: I863605b23798cbca3f6c8ab5a154fd432f1f4dcc
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:40:02 +02:00
Oswald Buddenhagen
6a8f64136e introduce /get property variants
properties are now split into a write location $$[FOO] and a read
location $$[FOO/get]. the write locations are hard-coded and configurable
via qt.conf/Paths as before, while the read locations are configured via
qt.conf/EffectivePaths.

this finally provides a clean solution to the problem that during the qt
build itself tools and libraries need to be taken from somewhere else
than they are installed to.

Change-Id: I956c43bd082afd465e690fe75d0bee3c2c0f7c25
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
2012-06-19 16:39:58 +02:00
Oswald Buddenhagen
b35d8e651b don't generate make_default targets
make_first really means the same, as the default target is 'first'
which immediately invokes make_first.

as a nice side effect, this fixes ALL_DEPS not being used by the subdirs
template's default target - make_default wasn't special-cased in the
right place, while make_first is.

Change-Id: I946cea3b2dae198eda61d31dbd19c6ccd15deac7
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-06-19 16:39:58 +02:00
Oswald Buddenhagen
14bbab09c1 introduce ability to build projects for the host system
when qmake runs into the new option(host_build) command, it will restart
the project evaluation with a host spec.

the new default host spec is called default-host (gasp!). it is
overridden with the pre-exising -spec / -platform option, while the new
-xspec / -xplatform option overrides the pre-existing default spec.
specifying -spec but not -xspec will set the xspec, too, so the behavior
is backwards-compatible. same for the XQMAKESPEC override read from
.qmake.cache and the environment variable.
the cleaner solution would be adding -hostspec, to be symmetrical with
the override semantics, but that would deviate from configure in turn.

Change-Id: I4297c873780af16ab7928421b434ce0f1d3820da
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-06-19 16:37:49 +02:00
Mark Brand
8e053a5dfc fix static library names when generating .pc files for pkgconfig
219a688ac1 added the version extension
which only occurs on the DLL import library.

Change-Id: Ie913adf039d7f3a9aadf43f4af014289a8aeacbe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Hib Eris <hib@hiberis.nl>
2012-04-19 19:46:07 +02:00
Oswald Buddenhagen
2640b71be4 remove support for QMAKE_PLATFORM_DIR
this was a somewhat magic support for sysroots, automatically rewriting
a number of path-holding variables. this was (as usual) completely
undocumented, extremely fragile, and we are coming up with something
better now anyway.

Change-Id: I045910f532cb3efc839ea81c7a48f8db695e4092
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
2012-03-08 23:52:34 +01:00
Lars Knoll
96232be146 Merge remote-tracking branch 'origin/api_changes'
Conflicts:
	dist/changes-5.0.0
	mkspecs/features/qt_module_config.prf
	qmake/project.cpp
	qmake/property.cpp

Change-Id: I6e4af40743a9aeff8ed18533a48036e332acc296
2012-03-04 21:45:05 +01:00
Oswald Buddenhagen
c679b2f0a6 get rid of Option::user_configs
merge them into before_user_vars. they are evaluated right after another
anyway.

Change-Id: I11859284b363fee01233f6e20989444fef711d0d
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-03-02 21:33:08 +01:00
Oswald Buddenhagen
012f799254 revamp -sysroot and -hostprefix handling
instead of being a variable added to the makespec (via qconfig.pri),
QT_SYSROOT is now a property.

the QT_INSTALL_... properties are now automatically prefixed with the
sysroot; the raw values are available as QT_RAW_INSTALL_... - this is
expected to cause the least migration effort for existing projects.

-hostprefix and the new -hostbindir & -hostdatadir now feed the new
QT_HOST_... properties.

adapted the qmake feature files and the qtbase build system accordingly.

Change-Id: Iaa9b65bc10d9fe9c4988d620c70a8ce72177f8d4
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2012-03-01 23:18:23 +01:00
Hib Eris
219a688ac1 Add TARGET_VERSION_EXT to pkgConfiglibName
The libName that is used in pkgConfig files should include the
TARGET_VERSION_EXT.

This is needed because in Win32MakefileGenerator::fixTargetExt(),
the TARGET_VERSION_EXT is added to the library name.

In Win32MakefileGenerator::processVars(), if TARGET_VERSION_EXT is empty,
it is set to VER_MAJ.

On platforms != Windows, TARGET_VERSION_EXT does not seem to be used.

We probably got away with this so far because pkgconfig files generation
for win32 was just added in 4.8 and nobody uses them yet, and because on
platforms != windows the TARGET_VERSION_EXT is not used.

Change-Id: I56f239e389f0ef926030e4c2376cadd92c4f673c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-02-24 16:21:37 +01:00
Andreas Hartmetz
553ffa0118 Revert "Escape project file name in makefile rebuild rules."
It was the result of miscoordination between Andreas Holzammer and me,
duplicating the functional change of commit
ea2c9f764f.
This reverts commit 8b7a9b4898.

Change-Id: I9a47746c1c12ca00b2dc5c5d50e99f9bf990e3f7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-02-23 16:38:45 +01:00
Stephen Kelly
7a7d82ffd9 Implement QMAKE_SUBSTITUTES.config = verbatim.
Change-Id: Ie0b333fa7fae2283e99e42f9cd7bab4e84991f40
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-02-11 13:30:31 +01:00
Andreas Holzammer
8b7a9b4898 Escape project file name in makefile rebuild rules.
Change-Id: I5407c2477613119b5aea2d00eb88cc24d35788ad
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-02-11 13:30:31 +01:00
Andreas Hartmetz
ea2c9f764f Escape path names in qmake-generated Makefiles.
qmake-generated Makefiles since 4.6 (according to bug report) contain
recursive qmake invocations with absolute paths to .pro files, where the
absolute paths are not escaped.

Task-number: QTBUG-11776
Change-Id: I49772c7d9147efea3bb7b9623c61d92aa0bb6857
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-01-31 11:47:11 +01:00
Jason McDonald
5635823e17 Remove "All rights reserved" line from license headers.
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.

Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-01-30 03:54:59 +01:00
Jason McDonald
629d6eda5c Update contact information in license headers.
Replace Nokia contact email address with Qt Project website.

Change-Id: I431bbbf76d7c27d8b502f87947675c116994c415
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-01-23 04:04:33 +01:00
Kurt Korbatits
0d128aded5 qmake wasn't handling spaces in names when dealing with extra installs.
When installing extra binaries the paths where not being escaped,
causing stripping and deleting to fail when dealing with filenames
that contained one or more spaces.

Change-Id: Iba4517b1110f6af30f7e2662cb86024a8b7b81f7
Reviewed-by: Kurt Korbatits  <kurt.korbatits@nokia.com>
Reviewed-by: Lincoln Ramsay <lincoln.ramsay@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-01-14 05:36:54 +01:00
Oswald Buddenhagen
3e4f7ed5ed QMap => QHash
this should make the evaluator quite a lot faster. the total win for
qtbase/src is only 6%, though.

i made some effort to avoid that output files get randomized. however, i
didn't bother to keep debug output sorted.

Change-Id: Id9cef4674c0153c11ebbb65cb63bf8c229eb56e3
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2012-01-10 16:16:34 +01:00
Jason McDonald
1fdfc2abfe Update copyright year in license headers.
Change-Id: I02f2c620296fcd91d4967d58767ea33fc4e1e7dc
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-01-05 06:36:56 +01:00
Tor Arne Vestbø
47df122259 qmake: Add object_parallel_to_source config option
This solves the problem of two source files in the same project
having the same name, which ends up with colliding object files.
It also solves issues with moving files around in the source tree
when the GNUmake option is used together with gcc_MD_depends,
where the dependency file would end up with a dependency to the
old source location.

We already have object_with_source option, but that does not play
nicely with shadow-builds. The new option tries to keep the same
hirarcy in the output dir (while still respecting OBJECTS_DIR),
as the sources. Any source with a path outside of the root project
directory (absolute or relative, ../../foo.cpp), will be put inside
the objects directory with the full path appended.

Change-Id: I0c96291974f4801f4c55a26485d512b15c144c00
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2011-12-07 12:55:28 +01:00
Tor Arne Vestbø
f9d5d23508 qmake: Don't assume that GNUmake is able to resolve arbitrary dependencies
Extra compilers may define a depend_command that's used to generate
dependencies for each input. When GNUmake was enabled we failed to
run this command, which was affecting resource files, as resource
dependencies are handled by an extra compiler defined in resources.prf.

The result was that changes to resources included in a resources-file
did not trigger a re-run of qrc and subsequent recompile of the
resource object file.

We must always run these custom dependency commands, even when GNUmake
(and the extended gcc_MD_depends option) is enabled, as GCC is only able
to handle regular #include-type dependencies. Hence, the check for the
'include_deps' flag was removed from doDepends(), and the check for
GNUmake was moved to the one place where it still made sense -- when
deciding whether or not to do recursive dependency checking.

Change-Id: I5ddb75c873120c90f798808efc52e81500786301
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
2011-11-28 15:08:01 +01:00
Tor Arne Vestbø
ca572a6144 qmake: Allow extra compilers to have the makefile depend on its inputs
And enable this configuration option for the resource compiler. This
results in a re-run of qmake whenever you touch a qrc file, which is
needed to keep the dependencies up to date. Otherwise you might end
up in the situation where you add a file to a qrc, edit the file some
time later, but a rebuild does not regenerate a cpp file and compile
that, so the final binary is stale.

Technically this dependency problem is present for all source files,
and qrc files are no different than any cpp file that you add a new
header #include to, or adding a Q_OBJECT macro to a header. To pick
up these changes we have to re-run qmake, so that qmake can run its
internal dependency checking, and any extra compiler dependency
commands.

The reason we're making this change for rcc files it that conceptually
people treat them as a "project" files, and expect them to behave similarly
to .pro or .pri files, in that editing the file will invalidate the
makefile. In practice this is often what happens when adding new
headers, as you touch the project file when changing the HEADERS
variable.

Task-number: QTBUG-13334
Change-Id: If69149678e7fba6d812d31dcc17877427f9a6122
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
2011-11-28 13:35:42 +01:00
Joerg Bornemann
981dd3b314 qmake: remove symbian support
Change-Id: I1db834500921681676a6f46e7750bdd81bf0093d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2011-11-07 13:26:41 +01:00
Styopa Semenukha
c4c8bd26bd Added missing no_include_pwd check
Merge-request: 2619
Reviewed-by: ossi

(cherry picked from commit 9db6959f8893a64146124db0cfafbcb154a9e105)

Change-Id: I096013754bd78f5fcf8afcc3ae8734abc959c107
Reviewed-on: http://codereview.qt-project.org/4582
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
2011-09-12 16:03:47 +02:00
Jyri Tahtela
f9f395c28b Update licenseheader text in source files for qtbase Qt module
Updated version of LGPL and FDL licenseheaders.
Apply release phase licenseheaders for all source files.

Reviewed-by: Trust Me
2011-05-24 12:34:08 +03:00
Rohan McGovern
152a10012c Ensure that recursive QMAKE_EXTRA_TARGETS use the correct makefile
Recursive QMAKE_EXTRA_TARGETS were omitting the `-f' option to make.
This would break in the case where the correct makefile was not named
`Makefile'.  The included autotest demonstrates the problem.

Note that this was fixed for normal targets back in 2005
by faac7bd178654fd67a6f3f9cf4f6f2605071448d (p4 202370), but was not
fixed for extra targets.

Reviewed-by: ossi
(cherry picked from commit 96a3bf7a8bbc1e5361e16cbeeceb4be674b88c30)
2011-05-13 08:59:43 +10:00
Oswald Buddenhagen
c1077e9fb6 don't ignore create_prl for static plugins
Task-number: QTBUG-18436
Reviewed-by: joerg
(cherry picked from commit 2ca4ce848c63c9fa0a48c0f9f4e7fdbc90463bf1)
2011-05-11 16:39:47 +02:00
Marius Storm-Olsen
9fe4482de1 Fix Makefile subtargets
Commit c04b7a55d1 broke subtargets
so every rule would just make 'first' (implicitly)
2011-05-07 03:19:51 +00:00
Joerg Bornemann
c04b7a55d1 qmake nmake generator: pass MAKEFLAGS to sub-make calls
Unlike other make tools nmake doesn't do this automatically.

Reviewed-by: ossi
2011-05-03 13:31:12 +02:00
Marius Storm-Olsen
bd06459179 Make qmake respect <subdir>.CONFIG = no_default_install
It already respects no_default_target
2011-04-27 12:05:58 +02:00
Qt by Nokia
38be0d1383 Initial import from the monolithic Qt.
This is the beginning of revision history for this module. If you
want to look at revision history older than this, please refer to the
Qt Git wiki for how to use Git history grafting. At the time of
writing, this wiki is located here:

http://qt.gitorious.org/qt/pages/GitIntroductionWithQt

If you have already performed the grafting and you don't see any
history beyond this commit, try running "git log" with the "--follow"
argument.

Branched from the monolithic repo, Qt master branch, at commit
896db169ea224deb96c59ce8af800d019de63f12
2011-04-27 12:05:43 +02:00