This should not be there because 'u' is passed to beginPass().
Change-Id: I95ba8ed400baa06948b4d4c6bbf7ca2d07a5480f
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Gerrit says it refuses to color lines that exceed 500 characters, so
let's split this line to get colors back.
Pick-to: 6.6 6.5
Change-Id: Iab6d37332e27ecdeaf1420da6fa242ca65f0aab5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test needs investigation. Skip it for now so that we can enable
CI for WASM but leave a note to investigate it.
Task-number: QTBUG-109954
Change-Id: I445996e969e7016a4d92a7e70da10b6d84a0fc71
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Two QCOMPARE calls aren't worth the extra indirection.
Change-Id: If3b54d303c28582c7df29a3f1c4dc1a2c2a974f4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When a table view adds its first row, QHeaderView::initializeSections()
is called. It initializes the vertical header view with the number of
added sections. Subsequently QHeaderView::sectionsInserted() is called
with the same amount of newly added rows/sections.
That leads to the initial amount of sections being 2x the number of
rows added in the first go. In other words, the table view will display
at least one row more than the underlying table model has.
This patch adds an OR condition to the early return check at the
beginning of QHeaderView::sectionsInserted(). The method returns early
if the number of sections equals the number of respective sections
(rows in this case) in the model.
An autotest is added in tst_QTableView::rowsInVerticalHeader().
Fixes: QTBUG-114225
Pick-to: 6.6 6.5
Change-Id: I895444f025591981965562e54e2335391db52357
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
33c88f86b5 added some logic to QAPM in
order to have it automatically emit headerDataChanged when rows/columns
were added or removed in the model. This was done as a stopgap measure
to prevent QAPM from asking for illegal indices in order to implement
automatic remapping of the section headings (since there's no
mapSectionToSource).
The commit seems to have introduced a regression in QHeaderView, which
isn't prepared to receive headerDataChanged while a row/column count
change is in progress. When receiving headerDataChanged, QHeaderView
will try to read the row/column count and will store it internally.
When it will then receive the signals for insertion/removal of
rows/columns, it will interpret it as a modification of the previously
stored value -- even if the value it stored was already correct.
Fix this by avoiding to have two signals in flight at the same time;
emit headerDataChanged as a queued invocation.
Task-number: QTBUG-114225
Change-Id: I521465a852b8c7135f22f730ead41dca760ba428
Pick-to: 6.5 6.6
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
INTEGRITY has a pre-P1115 implementation of std::erase/erase_if that
returns void instead of the number of erased elements, so make q20's
implementation more specialized, so the compiler will pick it over
INTEGRITY's (Marc's idea from the code review).
Change-Id: I88d025a3f90cdd65f5bb73beb8a39e32ccf12d9b
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Wrappers around P1301 [[nodiscard("reason")]].
[ChangeLog][QtCore][Q_NODISCARD_X/Q_NODISCARD_CTOR_X] Added as
wrappers around C++20 [[nodiscard("reason")]].
Task-number: QTBUG-114767
Change-Id: Ie566d9c9d500ef632c7e243af97081f83506a752
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This relies on qsb being able to invoke dxc instead of fxc when the
request HLSL (shader model) version is 6.1. (6.1 is required for
SV_ViewID) This currently works only when conditioning offline with
qsb (or via CMake), because qsb can easily invoke dxc instead of
fxc. When shipping HLSL inside the .qsb package (so when -c is not
specified or running the external tool fails), this won't work since
the D3D12 backend still uses D3DCompile(), not IDxcCompiler. Support
for that will be investigated separately.
We also need to bump to ID3D12Device2 and ID3D12GraphicsCommandList1.
With Windows 10 version 1703 being quite old now, this should not be a
problem at run time.
There are however issues at build time, namely that MinGW and
MinGW/LLVM and similar seems to have ancient Windows SDK headers
according to the CI test runs. None of the MSVC configurations have
this in the CI, they have reasonable versions of d3d12.h and similar.
Therefore, one important aspect of this change is that the D3D12
backend of QRhi will only be available from now on when the SDK
headers are new enough (meaning ID3D12Device2 is declared, which is a
several years old type now). Otherwise, QRhi::create() will simply
fail when asking for D3D12 with a helpful warning message about the Qt
build being crippled.
Implementation-wise, there are surprises in store as well:
The way the PSO is created needs to be revamped to follow the
extensible approach that uses a pipeline state stream
description. Both the graphics and compute pipeline creation is
changed to use CreatePipelineState() and the associated
machinery. This is only really essential for graphics pipelines since
we know have to include data for view instancing (multiview). For
compute the result is the same as before.
Additionally, the view count must now be baked into the
QRhiGraphicsPipeline. This means that applications must call
setMultiViewCount() with the same value (typically 2) *both* on the
render target's color attachment and on the pipeline. Backends that do
not care about the pipeline's view count (GL, Vulkan) will of course
ignore it, but if it's not set correctly D3D12 will fail. The manual
test is updated accordingly.
Fixes: QTBUG-114772
Change-Id: I93db7313377e711c2faeb956815899b12132d23b
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Under some circumstances, MSVC seems to complain about SlotArgumentCount
being unused
qobject.h(210): warning C4189: 'SlotArgumentCount': local variable is
initialized but not referenced
note: see reference to function template instantiation
'QMetaObject::Connection QObject::connect<void(__cdecl QAction::* )(bool),
main::<lambda_1>>(const QAction *,Func1,
const QtPrivate::ContextTypeForFunctor<main::<lambda_1>,void>::ContextType *,
Func2 &&,Qt::ConnectionType)' being compiled
This is nonsense, as SlotArgumentCount is used in the next line, to
construct the list of signal arguments, but the workaround to declare
the variable as [[maybe_unused]] is trivial.
Add a connect statement to the test case that creates such a connection.
This does not produce any warning with or without the attribute (and if
it did, the build would fail for CI configuratinos setting -Werror).
Pick-to: 6.6
Fixes: QTBUG-114781
Change-Id: I4ee6f7d57c2836ef3dd9741d037d48181af2cdec
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
And take the opportunity to clarify what the QtVforkSafe namespace is
doing. Amends commit e71c226d6f.
Pick-to: 6.6
Change-Id: I443cf0c8a76243eead33fffd1767f3fa390a7cdd
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
When setFuture() was handed an element of m_futures, it would hold the
reference to past the clear(), which invalidates said reference.
Fix by taking the future by value instead of by cref.
While append() is not affected, as QList::append() already guards
against aliasing, do the same change there, both for consistency as
well as to optimize the common case of passing rvalues. It also means
we can use the rvalue overload of QList::append(), skipping the alias
analysis in the lvalue QList::append().
[ChangeLog][QtConcurrent][QFutureSynchronizer] Fixed a crash in
setFuture() if the argument was already a member of
QFutureSynchronizer::futures().
Pick-to: 6.6 6.5 6.2
Change-Id: Ic0b212b9f265a746df9a6beb6272a5415d131442
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
QWidgetPrivate::focusObject() always returns nullptr. That has lead to
mismatches between QGuiApplication::focusObject() and
QApplication::focusWidget(), when a widget got focus by the window
system (e.g. mouse click).
This patch implements QWidgetPrivate::focusObject.
It returns the current widget, if it doesn't have a focus proxy.
If it has a focus proxy, it resolves the proxy chain and returns the
deepest focus proxy.
(Note: It does not return QWidget::focusWidget(), because the focus
widget might not yet have been set, when the method is called).
Fixes: QTBUG-92464
Fixes: QTBUG-108522
Pick-to: 6.6 6.5 6.2
Done-With: Liang Qi <liang.qi@qt.io>
Change-Id: Icf01e8ac4fc5f722fbf8e0ca5a562617ae9ae8f2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Use the new argument to bundle the OpenSSL prebuilt libararies so that
ssl operations are actually tested at runtime.
Task-number: QTBUG-110025
Pick-to: 6.6 6.5
Change-Id: I0d73fed463a1724a9e0ee84ba603aa2ff1bc649b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This is in line with how QMetaType handles QMetaTypeInterface*. You can
retrieve a const pointer to it.
Pick-to: 6.6
Task-number: QTBUG-113690
Change-Id: Iaf3c10603dc6049a5553987c90006807867abc0d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
ACE-encode the domain names, replace dashes with underscores,
prepend underscore to domain name parts that start with a digit.
Add a regression test into tst_qdbusinterface.
Fixes: QTBUG-71674
Change-Id: I92e0c6889163c0eccc4c833f2058d759631f562c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Or old and new load hints in mergeLoadHints() instead of just storing
new ones. Andjust QLibraryPrivate::setLoadHints() to handle objects
with no file name differently and just set load hints directly.
Mention that load hints are merged once the file name is set
in the documentation for QLibrary::setLoadHints().
Add a regression test into tst_qfactoryloader.
Update and extend tst_QPluginLoader::loadHints() to take into account
load hints merging.
Fixes: QTBUG-114480
Change-Id: I3b9afaec7acde1f5ff992d913f8d7217392c7e00
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's not a real leak in that the string data is being freed on program
exit (or, more recently, QPixmapCache::clear()), but it can lead to
lots of memory being bound for much longer than expected when users
put in new QString keys without attempting to retrive them again. It
can also lead to problems with QStringLiterals lingering around until
after their underlying data has been freed. A bug in the Fusion style,
generating new string keys for identical state, exposed this
misbehavior, and one way to fix the resulting issue for the user is to
make sure that QPixmapCache doesn't leak QString keys.
The Fusion style issue with generating non-repeating keys for use with
QPixmapCache should also be fixed, eventually, but this patch
relegates that to an optimization issue (the caching is effectively
non-existent), the resource exhaustion is gone now.
The issue exists because the QString keys are internally mapped to
QPixmapCache::Key's by way of a QHash<QString, Key> cacheKeys data
structure. When the QCache, indexed by Key, not QString, decides to
evict an entry, the Key is invalidated, but no-one was removing the
corresponding entry from cacheKeys. So make the existing releaseKey(),
used to invalidate copies of Keys referring to evicted pixmaps, do
that, now. So as not to have to scan the whole cacheKeys QHash for the
right Key, store the QString key, if any, inside the Key, so
releaseKey() can retrieve it and use it for O(1) erasure from
cacheKey.
This allows removing the previous work-around in clear()
(6ab0d25a09), greatly simplify
object(QString), and requires to rewrite all code that holds iterators
or references into cacheKeys over an insertion into or removal from
the QCache. Two (insert() and remove()) have already been done in
prequel commits, so only flushDetachedPixmaps() was left.
Fixes: QTBUG-112200
Pick-to: 6.6 6.5
Change-Id: Ic93b0ed388ae963267fe242b491c6c941d146b99
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Amends 55fe46fd58. Before that change,
key release events were ignored as the QLineEdit::event reimplementation
continued to call QWidget::event, and as QLineEdit didn't override
keyReleaseEvent, the default implementation in QWidget got called to
ignore the event.
Restore that behavior by explicitly calling the QWidget implementation
after updating QLineEdit-specific states, and add a test case.
Fixes: QTBUG-114654
Pick-to: 6.5 6.6
Change-Id: Ic8aa35a1c915b446aece47aaf03ef5cf1884b936
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Previously, failure handlers did not propagate cancellation. This would
lead to crashes when a QPromise was cancelled without having generated
any result. Subsequent continuations would be invoked and try to access
the result (which was nonexistent) and then crash.
This patch propagates cancellation through failure handlers to prevent
subsequent continuations from being called in the first place.
Fixes: QTBUG-114606
Pick-to: 6.6
Pick-to: 6.5
Change-Id: I23b28a8e70a76e1ba6416be4440360c6dbaef2a3
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The export name is now ${TARGET_NAME}Entry. This can also be overridden
by using QT_WASM_EXPORT_NAME, both in CMake and qmake
Change-Id: I59c97ae6e22f0b2720716e9d7eff7b6b13d37ab5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QObjectPrivate::getPropertyAdaptorSlotObject called
connectionsForSignal.
Calling this function is only safe after it has been ensured beforehand that the vector has size > signalIndex. As getPropertyAdaptorSlotObject
is not supposed to modify the vector, it does not resize the vector and it could consequently end up with an out-of-bounds read.
To avoid that issue, we instead first check if the vector can
potentially contain an entry for the signal. If not, we simply return
nullptr, and avoid the call to connectionsForSignal.
The issue and its fix can be verified by running the modified
tst_qproperty test with ASAN enabled. The test is modified in the
following way:
- We first create a signal connection to a dummy slot. Otherwise,
connections.loadRelaxed() would return a nullptr, and the problematic
code would never be reached.
- We add enough signals to ensure that the fooChanged signal will
actually be out of reach (which means >= 8 signals, as the initial
capacity of the vector is 8)
Running the test without ASAN will most likely not result in a failure,
as then the out-of-bounds read will simply read garbage, and the most
likely result is that the cast below will fail.
Pick-to: 6.6 6.5
Change-Id: I18a3c4f52769c2b6491a685abb84f6fcfb44e4d8
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This property can take a either a WebAssembly.Module
or a promise to a module, and we don't have to specify
the exact type in the property name.
Pick-to: 6.6
Change-Id: Iebaf52178253afe8c93cf78bbe0853461bf48b67
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
The test checks whether correct windows get correct keyboard input,
having been activated with mouse clicks.
Also fixes the event propagation error found. Key events would propagate
to parent windows, which is something that should not happen with
window managers.
Change-Id: I18bae8c14cce5ccae151c2a00c84ffdba3b4587f
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
Fixes an issue with generated code where the name of an enclosing
namespace is identical to an enum class type, when Q_ENUM_NS is used.
Consider:
namespace a {
Q_NAMESPACE
namespace b {
enum class b { Key, Key2 };
Q_ENUM_NS(b);
}
}
moc generated code such as:
Q_CONSTINIT const QMetaObject a:🅱️:staticMetaObject = { {
...
qt_incomplete_metaTypeArray<qt_meta_stringdata_CLASSaSCOPEbENDCLASS_t,
// enum 'TestEnum'
QtPrivate::TypeAndForceComplete<b::b, std::true_type>,
// Q_OBJECT / Q_GADGET
QtPrivate::TypeAndForceComplete<void, std::true_type>
>,
nullptr
} };
which confused the compiler:
error: ‘b’ is not a member of ‘a:🅱️:b
83 | QtPrivate::TypeAndForceComplete<b::b, std::true_type>,
Fixes: QTBUG-112996
Pick-to: 6.6
Change-Id: I37aee83c32efe96cc9d6c2bd0bdb9ba80bb7b8a7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We still need to consult fallbackThemeName() when computing the
parent list for an individual theme, as the Freedesktop Theme Icon
spec mandates that the "hicolor" theme comes last, but we no longer
need to do explicit fallback to fallbackThemeName() if a theme is
not found.
Pick-to: 6.5 6.6
Change-Id: I6c0b5a45d8258c5b6eaa761402944a735b1606ba
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
The use of fallback icons should not depend on a theme being set.
[ChangeLog][QtGui][QIcon] QIcon::fallbackSearchPaths() will now be consulted
for fallback icons even if the current theme name is empty.
Pick-to: 6.5 6.6
Change-Id: Ia8d14062de7c53601fd9dac30f87a9e672aa2207
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
So that building only tst_qprocess also builds the required test app.
Change-Id: I19a92f9dd2f4de08302d09cad0caf55c285a6dae
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We would previously only use the fallback theme for themes that did
not exist, or for themes that did not declare any parent theme.
We now unconditionally use the fallback theme, even for themes that
declare their own parent themes, so that a QIcon::fromTheme("foo")
that doesn't exist in the current theme, nor any of its parents,
nor in "hicolor", will still be looked up in the fallback theme.
The reason this seemed to work in the existing tests was because
our test themes inherit system themes such as crystalsvg and gnome,
and we didn't provide a hicolor theme. Any of these themes missing
would lead us into the code path where we use the fallback theme
for a missing theme, masking that fact that we had not added the
fallback theme to the list of fallbacks for the theme that had
explicit parents declared.
The logic has been moved out of the theme parsing and into an
accessor in QIconTheme, so that we're not caching the fallback
theme lookup.
[ChangeLog][QtGui][QIcon] QIcon::fallbackThemeName() will now be
used as fallback even for themes that declare a parent theme.
Pick-to: 6.5 6.6
Change-Id: Ib0ce1dfe97030f23893460ed624073a719a3ebd1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Setting a fallback theme will affect the lookup strategy, so we need
to invalidate earlier lookups.
Pick-to: 6.5 6.6
Change-Id: I962245ddb3a20b7798d5ce831ed8a369b0ab76b4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Adding the "assets:" prefix to BaseName leads to wrong names returned by
QFileInfo{"assets:/path/to/file"}.fileName().
Instead to return "file" it returns "assets:/file" which is not the
expected result.
Fixes: QTBUG-114576
Fixes: QTBUG-114219
Fixes: QTBUG-112261
Pick-to: 6.6 6.5 6.5.2
Change-Id: I574bf325300c0aedef68b1b183fa837144ad63c6
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
We so far only handled them if they came at the very start of the method
declaration.
This patch ensures that we also handle them after the meta-method tag
(but before the actual type).
Unifying parseFunction and parseMaybeFunction to avoid the need to
munally keep them in sync is left for another day.
Fixes: QTBUG-111330
Pick-to: 6.6 6.5 6.5.2 6.2
Change-Id: Ic94edb69f04b9150aea2c8e6d004a8b9e5cf12ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I8e0c5d7b9049fb3c3248749db8dc8c616db293f0
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
The test checks whether windows repaint correctly by sampling the
background after their backing stores have been flushed.
Change-Id: Ib544457074d7d477a4acdc5c331ef83e5ba471d2
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
If the style changes while a popup is open (or about to close),
the popup will change style as well before it's hidden. And
this can result in the popup window briefly ending up smaller
than what it needs to be, in order to fit all the menu items.
In that case, it will show 'up' and 'down' widgets in the
menu that auto scrolls it when hovered. And all this can
happen for a split second while the menu is about to close
(as a result of the user clicking on a menu item).
A bug happens because of this if you click on the last menu
item in the list, and this causes the style to change. In
that case, the 'down' widget will end up directly underneath
the mouse for a split second, which will trigger an auto-scroll
timer to start. This timer will trigger a bit later, after
the popup has been hidden, and scroll the list view a bit down.
The result is that the next time you open the popup, it ends up
at the wrong place on the screen in a failed attempt to center
the current index on top of the combobox.
This patch will make sure that we always scroll the list view
to the top before we start calculating where the popup should
be placed on the screen. Otherwise the geometry ends up wrong
since the popup will anyway be resized (if possible) to fit
all the menu items before it's shown and should therefore not
take scrolling into account.
Pick-to: 6.6 6.5
Fixes: QTBUG-113765
Change-Id: I61b5b832904de471c2303fc67325feec322b1449
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Like commit 91f6460aff which added support
for Windows. This API is documented and has apparently been present in
FreeBSD for a long while.
The DragonflyBSD API is very similar, but I don't have one to confirm
that I've coded correctly. OpenBSD and NetBSD may have similar APIs, but
I haven't even researched them. We're open to contributions, though.
Change-Id: I63b988479db546dabffcfffd1766bc431fed614b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Setting parents for WASM platform windows is now supported. This means
that windows now reside in a hierarchical window tree, with the screen
and individual windows being nodes (QWasmWindowTreeNode), each
maintaining their own child window stack.
The divs backing windows are properly reparented in response to Qt
window parent changes, so that the html structure reflects what is
happening in Qt.
Change-Id: I55c91d90caf58714342dcd747043967ebfdf96bb
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The idea is to store a concatenable in a QStringBuilder object by value
or by reference, depending on how it was originally passed into the
concatenation operator. So if it was passed by r-value, we treat it as
a temporary object and hold it by value (and use move-semantic if
available), otherwise we hold it by reference (as before).
To achieve this we first change concatenation operators '%' and '+'
to take their arguments by universal reference. Next we instantiate
QStringBuilder object with deduced types of the arguments, which will
be a "value type" or a "reference type" according to "universal
reference deduction rules".
Further we use perfect forwarding to pass arguments to QStringBuilder's
constructor. Thus arguments, initially passed by r-value reference
and which are move-constructible, will be "moved" to corresponding
QStringBuilder member variables.
So, to summarize:
1. Arguments passed by l-value reference - stored in QStringBuilder
object by reference (as before).
2. Temporary objects passed by r-value reference - stored in
QStringBuilder object by value. If a type is move-constructible
(QSting, QByteArray, etc), the object will be "moved" accordingly.
Special thanks to Giuseppe D'Angelo for the tests.
Fixes: QTBUG-99291
Fixes: QTBUG-87603
Fixes: QTBUG-47066
Task-number: QTBUG-74873
Task-number: QTBUG-103090
Task-number: QTBUG-104354
Change-Id: I64f417be0de0815ec5ae7e35a1cc6cef6d887933
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Vladimir Belyavsky <belyavskyv@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
currentTextChanged is emitted when the current index changes
and the current text doesn't.
This can be the case, if
- old and new index have identical text values
- an item is removed below the current index
[ChangeLog][Widgets][QComboBox] emit currentTextChanged only,
if currentText changes.
Add a corresponding test in tst_QComboBox::currentText().
Fixes: QTBUG-113717
Pick-to: 6.6
Change-Id: I847874f0792b29a2841e50bb82d06ad496fb02c3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The example seems incomplete, is undocumented (and unused in shippets,
in spite of tags being present), and generally full of comments that
give the impression that this is for manual testing rather than showing
best practices.
Pick-to: 6.5 6.6
Change-Id: Ie615420e493cc6bb461c5d9ff8d4ae82bb3591db
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The code is mostly an implementation of a model based on QStorageInfo,
shown in an otherwise uninteresting tree view.
Pick-to: 6.5 6.6
Change-Id: Id6ce70d71ddc9bcd6e82a9ee12f5e1af159eac7a
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
