Gives it its own changed signal, and simplifies setting from group,
while fixing an inconsistency in propagation.
Change-Id: I22b243210260a8878144fa4b60204df46f847f37
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
I still have doubts that QEventPoint can't be made small enough that
copying would be cheaper than reference-counting and all the indirections
in now-noninline accessors, but this gives us the usual freedom to
change the data members later on.
Change-Id: I792f7fc85ac3a9538589da9d7618b647edf0e70c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Because we removed public setters from QTouchEvent and QEventPoint in
4e400369c0 and now it's proposed to give
QEventPoint a d-pointer again, the implementation of QTouchEventSequence
needs to start using QMutableEventPoint: being a friend will no longer
be enough, because the member variables won't be accessible in the future.
But because we have separate test libs for Gui and Widgets, it needs to
be further refactored into two classes.
Change-Id: I0bfc0978fc4187348ac872e1330d95259d557b69
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Following the introduction of QKeyCombination, reduce the number
of warnings raised by the test. Drive-by, remove some pointless
math like Qt::SHIFT+0, which does not make any sense and would
actually fail to compile (shortly).
Refactoring the test to fully use QKeyCombination (instead of
ints) is left as a future exercise; some QKeyCombination->int
warnings are still around.
Change-Id: If825bc4c369986623447927bb11493c4f58b544f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
C++20 via P1120 is deprecating arithmetic operations between
unrelated enumeration types, and GCC 10 is already complaining.
Hence, these operations might become illegal in C++23 or C++26 at
the latest.
A case of this that affects Qt is in key combinations: a
QKeySequence can be constructed by summing / ORing modifiers and a
key, for instance:
Qt::CTRL + Qt::Key_A
Qt::SHIFT | Qt::CTRL | Qt::Key_G (recommended, see below)
The problem is that the modifiers and the key belong to different
enumerations (and there's 2 enumerations for the modifier, and one
for the key).
To solve this: add a dedicated class to represent a combination of
keys, and operators between those enumerations to build instances
of this class.
I would've simply defined operator|, but again docs and pre-existing
code use operator+ as well, so added both to at least tackle simple
cases (modifier + key).
Multiple modifiers create a problem: operator+ between them yields
int, not the corresponding flags type (because operator+ is not
overloaded for this use case):
Qt::CTRL + Qt::SHIFT + Qt::Key_A
\__________________/ /
int /
\______________/
int
Not only this loses track of the datatypes involved, but it would
also then "add" the key (with NO warnings, now its int + enum, so
it's not mixing enums!) and yielding int again.
I don't want to special-case this; the point of the class is
that int is the wrong datatype. Everything works just fine when
using operator| instead:
Qt::CTRL | Qt::SHIFT | Qt::Key_A
\__________________/ /
Qt::Modifiers /
\______________/
QKeyCombination
So I'm defining operator+ so that the simple cases still work,
but also deprecating it.
Port some code around Qt to the new class. In certain cases,
it's a huge win for clarity. In some others, I've just added
the necessary casts to make it still compile without warnings,
without attempting refactorings.
[ChangeLog][QtCore][QKeyCombination] New class to represent
a combination of a key and zero or more modifiers, to be used
when defining shortcuts or similar.
[ChangeLog][Potentially Source-Incompatible Changes] A keyboard
modifier (such as Qt::CTRL, Qt::AltModifier, etc.) should be
combined with a key (such as Qt::Key_A, Qt::Key_F1, etc.) by using
operator|, not operator+. The result is now an object of type
QKeyCombination, that stores the key and the modifiers.
Change-Id: I657a3a328232f059023fff69c5031ee31cc91dd6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Without an override for logicalDpi() the base class implementation
would use the geometry of the screen to figure out the DPI, and end
up with ~100, which combined with a 96DPI base logical DPI would
give a wrong scale factor.
Change-Id: I68aecce44d2ee672c7b707dfe5444af8f551e961
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The explicit paint event on QtGui and QPA level allows us to untangle
the expose event, which today has at least 3 different meanings.
It also allows us to follow the platform more closely in its semantics
of when painting can happen. On some platforms a paint can come in
before a window is exposed, e.g. to prepare the first frame. On others
a paint can come in after a window has been de-exposed, to save a
snapshot of the window for use in an application switcher or similar.
The expose keeps its semantics of being a barrier signaling that the
application can now render at will, for example in a threaded render
loop.
There are two compatibility code paths in this patch:
1. For platform plugins that do not yet report the PaintEvents
capability, QtGui will synthesize paint events on the platform's
behalf, based on the existing expose events coming from the platform.
2. For applications that do not yet implement paintEvent, QtGui will
send expose events instead, ensuring the same behavior as before.
For now none of the platform plugins deliver paint events natively,
so the first compatibility code path is always active.
Task-numnber: QTBUG-82676
Change-Id: I0fbe0d4cf451d6a1f07f5eab8d376a6c8a53ce8c
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Remove QTypeInfo::isStatic, as that's not used anymore in Qt 6.
Also remove sizeOf, it's unused, and we have QMetaType for that if
required.
Remove all typeinfo declaractions for trivial types, as the default
template covers them correctly nowadays.
Finally set up a better default for isPointer, and do some smaller
cleanups all over the place.
Change-Id: I6758ed37dfc701feaaf0ff105cc95e32da9f9c33
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Having three methods with the same name doing different things is
unnecessarily confusing, so follow the standard naming convention in
Qt and call the getter of the resolve mask resolveMask, and the setter
setResolveMask. These methods were all documented as internal.
The publicly documented resolve() method that merges two fonts and
palettes based on the respective masks remains as it is, even though
'merge' would perhaps be a better name.
Change-Id: If90b1ad800834baccd1dbc38fc6b861540d6df6e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This makes high-level event dispatching easier: for example in Qt Quick,
all pointer events should eventually be delivered to items in a similar way.
Implemented in a similar way as d1111632e2.
Change-Id: I2f0c4914bab228162f3b932dda8a88051ec2a4d7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
event()->device() was the most common use case anyway.
The idea that the "parent" of a QEventPoint is the QPointerEvent
interferes with the ability to copy and move event objects: the parent
pointers are dangling unless we use the QPointerEvent subclass
destructors to set the points' parents to null. Since there is no move
constructor, even returning a QEventPoint from a function by value
results in destroying the temporary instance and copying it to the
caller's space. So the parent pointer is often useless, unless we do
even more work to maintain it when the event moves.
If we optimize to avoid copying QEventPoints too much (and perhaps
enable exposing _mutable_ points to QML) by storing reusable instances in
QPointingDevice (which is the current plan), then the actual parent will
no longer be the event. Events are usually stack-allocated, thus
temporary and intended to be movable.
Change-Id: I24b648dcc046fc79d2401c781f1fda6cb00f47b0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
And remove one of the type id to name mapping that still
existed in QMetaType. QMetaTypeInterface can provide that,
so there's no need to have a second copy of the data.
qMetaTypeTypeInternal() can still map all the names of all
builtin types to ids. That functionality is for now still
required by moc and can't be removed yet.
Change-Id: Ib4f8e9c71e1e7d99d52da9e44477c9a1f1805e57
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
And remove the old manual registration code for those operators.
Add some special handling for long/ulong, as these types could be
streamed as a QVariant so far, but are not directly streamable
through QDataStream.
[ChangeLog][QtCore][QMetaType] The QMetaType::registerStreamOperators()
and QMetaType::registerDebugStreamOperator() methods have been
removed. The streaming operators for a type are now automatically
registered together with the type registration. This implies that the
operators should be visible wherever the type is visible and being used.
[ChangeLog][Behavior Incompatible Changes] Because the QDataStream and
QDebug serialization operators are automatically registered with
QMetaType, the declarations of those functions must be present at any
point where the type is used with QMetaType and QVariant.
Change-Id: I4a0732651b20319af4a8397ff90b848ca4580d99
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This extends to/fromString to include style strategy, capitalization,
letter and word spacing and stretch. QFont::fromString() keeps
compatibility with strings from earlier versions as well.
Fixes: QTBUG-67687
Change-Id: I5e95a58f1cd850214af2a7d8906a214facd4e661
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
MidButton had its // ### Qt 5: remove me
upgraded to Qt 6 at 5.0; but it dates back to 4.7.0
Replace the many remaining uses of MidButton with MiddleButton in the
process.
Pick-to: 5.15
Change-Id: Idc1b1b1816673dfdb344d703d101febc823a76ff
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It was marked internal anyway. Use the constructor taking a
QMetaType instead.
Change-Id: I15b9cd0911aac063a0f0fe0352fa2c84b7f7c691
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
isNull() would forward to the contained type and check that type's
isNull() method for some of the builtin types. Remove that behavior
and only return true in isNull(), if the variant is invalid, doesn't
contain data or contains a null pointer.
In addition, implement more consistent behavior when constructing
a QVariant using the internal API taking a copy from a void *.
isNull() should return true in both cases. This mainly changes behavior
for some corner cases and when using our internal API.
[ChangeLog][Important Behavior Changes] QVariant::isNull()
no longer returns true when the variant contains an object of some
type with an isNull() method, that returns true for the object;
QVariant::isNull() now only returns true when the variant contains
no object or a null pointer.
Change-Id: I3125041c4f8f8618a04aa375aa0a56b19c02dcf5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Remove the compare method in the QVariant::Handler struct. Rely
on the generic support provided by QMetaType instead.
[ChangeLog][Important Behavior Changes][QVariant] QVariant will now use builtin support in
QMetaType to compare its content. This implies a behavioral change
for some graphical types like QPixmap, QImage and QIcon that will
never compare equal in Qt 6 (as they do not have a comparison
operator).
Change-Id: I30a6e7116c89124d11ed9052537cecc23f78116e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
mkspecs/features/qt.prf adds a dependency on the system threading
library if the Qt Core thread feature is enabled. Because qt.prf is
loaded by any public or internal Qt project, it's essentially a public
dependency for any Qt consumer.
To mimic that in CMake, we check if the thread feature is enabled, and
and set the Threads::Threads library as a dependency of Qt6::Platform,
which is a public target used by all Qt modules and plugins and Qt
consumers.
We also need to create a Qt6Dependencies.cmake file so we
find_package(Threads) every time find_package(Qt6) is called.
For the .prl files to be usable, we have to filter out some
CMake implementation specific directory separator tokens
'CMAKE_DIRECTORY_ID_SEP' aka '::@', which are added because we call
target_link_libraries() with a target created in a different scope
(I think).
As a result of this change, we shouldn't have to hardcode
Threads::Threads in other projects, because it's now a global public
dependency.
Task-number: QTBUG-85801
Task-number: QTBUG-85877
Change-Id: Ib5d662c43b28e63f7da49d3bd77d0ad751220b31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
QQuickPointerEvent had them, so despite how trivial they look,
it's very convenient to keep using them in QQuickWindow rather than
duplicating these kinds of checks in various places, and for multiple
event types too.
Change-Id: I32ad8110fd2361e69de50a679ddbdb2a2db7ecee
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The previous implementation multiplexed callback-based event
notification into a single proxy event (cf. 85403d0af), which was
in turn object-waited for (this was the case since the beginning
of public qt history). It makes more sense to multiplex into a
posted message, because that also works with foreign event loops
that do not know anything about our event objects.
Task-number: QTBUG-64443
Change-Id: I97945ac8b5d7c8582701077134c0aef4f3b5a18f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Move QWindowsMime (which was a public class in Qt 4 and moved to the QPA
plugin in Qt 5) to the platform namespace and add register functions to the
native application.
Move in test code from QtWinExtras.
Task-number: QTBUG-83252
Change-Id: Iaac440e2d5cb370110919921b1eeb779600b5b65
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Expand the getSetCheck to include all properties, and add a test to
verify the fallback logic for the tooltip property.
Use the meta object system to set and check properties in the
tooltip-test to verify that things don't break when migrating to
the new property system.
Change-Id: I56355e8b436ede46701a124a9241ed26d2c706c5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Change the functions to operate in float and add the
QPoint versions as overload calling them. This is
more in-line with the event accessors using float
and allows for removing some workarounds using a delta when
converting touch points.
Leave QPlatformWindow::map(To/From)Global() as is
for now and add helpers for float.
Change-Id: I2d46b8dbda8adff26539e358074b55073dc80b6f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Some goals that have hopefully been achieved are:
- make QPointerEvent and QEventPoint resemble their Qt Quick
counterparts to such an extent that we can remove those wrappers
and go back to delivering the original events in Qt Quick
- make QEventPoint much smaller than QTouchEvent::TouchPoint, with no pimpl
- remove most public setters
- reduce the usage of complex constructors that take many arguments
- don't repeat ourselves: move accessors and storage upwards
rather than having redundant ones in subclasses
- standardize the set of accessors in QPointerEvent
- maintain source compatibility as much as possible: do not require
modifying event-handling code in any QWidget subclass
To avoid public setters we now introduce a few QMutable* subclasses.
This is a bit like the Builder pattern except that it doesn't involve
constructing a separate disposable object: the main event type can be
cast to the mutable type at any time to enable modifications, iff the
code is linked with gui-private. Therefore event classes can have
less-"complete" constructors, because internal Qt code can use setters
the same way it could use the ones in QTouchEvent before; and the event
classes don't need many friends. Even some read-accessors can be kept
private unless we are sure we want to expose them.
Task-number: QTBUG-46266
Fixes: QTBUG-72173
Change-Id: I740e4e40165b7bc41223d38b200bbc2b403e07b6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Qt::UNICODE_ACCEL had no effect since at least Qt 4.0. We can drop
it in Qt 6. The whole Qt::Modifier enumeration is still widely
used, so we can't drop it yet, but we should aim at doing so in
Qt 7. Add a note.
[ChangeLog][QtCore][Qt::Modifier] The Qt::UNICODE_ACCEL enumerator
has been removed. It had no effect since Qt 4.0.
[ChangeLog][QtCore][Qt::Modifier] Usage of the enumerators in
the Qt::Modifier enumeration is discouraged. The enumeration
will likely get removed in the next major version of Qt.
Change-Id: If25f30d920878d32903b91a38044f5da042c7eab
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is in preparation for regenerating them with the new qt_foo
prefixed APIs.
Change-Id: Iff34932d642b1c0186ee39f952adf3ad367fd602
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
There doesn't seem to be any reason users will need to query tablet
devices by their IDs, because every event comes with a complete
instance already, and we have QInputDevice::devices() to list them all.
QPointingDevicePrivate::tabletDevice() can create a new instance if a
matching one is not found (and complains about that); it's intended
for use in QtGui, as a way to find the device if it was not part of the
QWSI event. Now it sets the parent of those auto-created instances
to QCoreApplication to avoid a memory leak.
On the other hand, queryTabletDevice() is intended for use in platform plugins
that need to check whether an instance exists; but they will take care
of creating new instances themselves, and thus have more control over the
parent and the details being stored. Now that the systemId can also be given,
the search is more likely to have a unique result, on window systems
that provide device IDs.
Rename id() to systemId() to clarify that it's a system-specific unique
device ID of some sort, not the same as the uniqueId that a stylus has.
However it seems that in practice, this will often be 0; so clarify that
if it's not unique, QInputDevicePrivate::fromId() and queryTabletDevice()
may not always find the right instance.
Clarify the function usage via comments.
Change-Id: I82bb8d1c26eeaf06f07c290828aa17ec4a31646b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is required to remove the ; from the macro with Qt 6.
Task-number: QTBUG-82978
Change-Id: I3f0b6717956ca8fa486bed9817b89dfa19f5e0e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Skip crashing tests and ignore failing tests on CMake platforms.
Add missing QTEST_ENVIRONMENT=ci env var assignment to Coin test
instructions. This was hardcoded by the Coin code for qmake
configurations.
Task-number: QTBUG-85364
Change-Id: Id2312e504a0d36b8f8596d4cebaa49c63731406e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The platform plugins are implemented to grab the entire screen if
no window ID is provided. They do not grab the entire virtual
screen, just the screen the method is called on.
On macOS, the implementation ignored the window parameter, and
always grabbed the entire virtual screen. This change fixes the
cocoa implementation. The test passes in local tests (with two
displays with different dpr). Since grabbing a screen returns an
image with managed colors, we need to convert it to sRGB color
spec first, otherwise displaying a grabbed image will produce
different results. This will need to be changed once Qt supports
a fully color managed flow.
The test does not cover the case where a window spans multiple
displays, since this is generally not supported at least on macOS.
The code that exists in QCocoaScreen to handle that case is
untested, but with the exception of the optimization it is also
unchanged.
Done-with: Morten Sørvig <morten.sorvig@qt.io>
Change-Id: I8ac1233e56d559230ff9e10111abfb6227431e8c
Fixes: QTBUG-84876
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The idea was to keep nagging us to update all the platform plugins to
do device registration. But besides being annoying, it would cause
test failures if we start adding QTest::ignoreMessage() all over,
and then some platforms start doing device registration properly.
Change-Id: Ia0fbb64cf86f33532be032ec9eebe6e4ad607f20
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
There is no reason for keep using our macro now that we have C++17.
The macro itself is left in for the moment being, as well as its
detection logic, because it's needed for C code (not everything
supports C11 yet). A few more cleanups will arrive in the next few
patches.
Note that this is a mere search/replace; some places were using
double braces to work around the presence of commas in a macro, no
attempt has been done to fix those.
tst_qglobal had just some minor changes to keep testing the macro.
Change-Id: I1c1c397d9f3e63db3338842bf350c9069ea57639
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This was causing some bogus failures in Qt Quick autotests.
Existing APIs like QQuickWindow::mouseGrabberItem() are not really
compatible with the idea of a mouse-less system; but perhaps we can
revisit this later.
Task-number: QTBUG-85114
Change-Id: Id1c2e5894e5cf13a79998aaea28d5f42fad920cf
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
We want every QInputEvent to carry a valid device pointer. It may be
some time until all QPA plugins are sending it, but it's necessary to
provide the functions for them to start doing that.
We now try to maintain the same order of arguments to all the functions.
handleTouchEvent(window, timestamp, device, the rest) was already there
(except "device" has changed type now), and is used in a lot of platform
plugins; so it seems easiest to let that set the precedent, and modify
the rest to match. We do that by adding new functions; we can deprecate
the older functions after it becomes clear that the new ones work well.
However the handleGestureEvent functions have only ever been used in
the cocoa plugin, so it's easy to change their argument order right now.
Modify tst_qwindow::tabletEvents() to test new tablet event API.
Task-number: QTBUG-46412
Change-Id: I1828b61183cf51f3a08774936156c6a91cfc9a12
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
...starting with a new feature: registering different devices at
different seats and verifying their capabilities and that we can get
them back again.
Change-Id: I8e58a49080633753d02a76e5fdc4932f5c674e0a
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
We have seen during the Qt 5 series that QMouseEvent::source() does
not provide enough information: if it is synthesized, it could have
come from any device for which mouse events are synthesized, not only
from a touchscreen. By providing in every QInputEvent as complete
information about the actual source device as possible, we will enable
very fine-tuned behavior in the object that handles each event.
Further, we would like to support multiple keyboards, pointing devices,
and named groups of devices that are known as "seats" in Wayland.
In Qt 5, QPA plugins registered each touchscreen as it was discovered.
Now we extend this pattern to all input devices. This new requirement
can be implemented gradually; for now, if a QTWSI input event is
received wtihout a device pointer, a default "core" device will be
created on-the-fly, and a warning emitted.
In Qt 5, QTouchEvent::TouchPoint::id() was forced to be unique even when
multiple devices were in use simultaneously. Now that each event
identifies the device it came from, this hack is no longer needed.
A stub of the new QPointerEvent is added; it will be developed further
in subsequent patches.
[ChangeLog][QtGui][QInputEvent] Every QInputEvent now carries a pointer
to an instance of QInputDevice, or the subclass QPointingDevice in case
of mouse, touch and tablet events. Each platform plugin is expected to
create the device instances, register them, and provide valid pointers
with all input events. If this is not done, warnings are emitted and
default devices are created as necessary. When the device has accurate
information, it provides the opportunity to fine-tune behavior depending
on device type and capabilities: for example if a QMouseEvent is
synthesized from a touchscreen, the recipient can see which touchscreen
it came from. Each device also has a seatName to distinguish users on
multi-user windowing systems. Touchpoint IDs are no longer unique on
their own, but the combination of ID and device is.
Fixes: QTBUG-46412
Fixes: QTBUG-72167
Task-number: QTBUG-69433
Task-number: QTBUG-52430
Change-Id: I933fb2b86182efa722037b7a33e404c5daf5292a
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Many of these were generated by clazy using the new qevent-accessors check.
Change-Id: Ie17af17f50fdc9f47d7859d267c14568cc350fd0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The helper processes were not in the correct location.
Change-Id: I0a80a22a931625ea0c9370db38ff29c881b964cb
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Windows unexpectedly passes PM_NOYIELD flag in wParam parameter to the
hook procedure, if ::PeekMessage(..., PM_REMOVE | PM_NOYIELD) is called
from the event loop. So, to ignore undocumented flag, we should
interpret wParam as a bit field.
Thanks to Robin Lobel for research.
Pick-to: 5.15
Fixes: QTBUG-84562
Change-Id: Ib16d7d747aebc9a3628e4ee67478c4d3edeb96f1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
It simplifies the API and reduces surprise to have rotation working by default.
On Android, the manifest specifies which orientations the application has
been designed to support; on iOS, it is controlled via the
UISupportedInterfaceOrientations property list key.
In addition, QWindow::contentOrientation() is another way to give
a hint to the window manager, or on iOS to directly control whether
the window's rotation is locked or not.
Task-number: QTBUG-35427
Task-number: QTBUG-38576
Task-number: QTBUG-44569
Task-number: QTBUG-51012
Task-number: QTBUG-83055
Change-Id: Ieed818497f686399db23813269af322bfdd237af
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Those can be trivially removed as they have direct replacements, or
are completely unused.
The migration path for QCursor::bitmap and QCursor::mask is
QBitmap *pb = c.bitmap(); // up to 5.15, warns in 5.15
QBitmap vb = c.bitmap(Qt::ReturnByValue); // from 5.15, works in 6
QBitmap b = c.bitmap(); // from 6.0 on
Change-Id: I3b3acd1c7f09c4c8414e98b3ce11986f1ecd5eda
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
