There should be a clear QWidget free path for people with no interest in
legacy QWidget functionality. Adding this option to configure makes this
path readily accessible and hence testable.
Change-Id: If87c1063fcf4c46f5280836126c11999feaa9f8a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Do not try to detect the host or target architectures using uname or
similar, and do not override with the -arch or -host-arch configure
arguments. The configures will still accept the -arch and -host-arch
arguments, but it ignores them and instead outputs a warning stating
that these arguments are obsolete and should not be used.
Set QT_ARCH and QT_HOST_ARCH qconfig.pri variables based on the compiler
target. This is done by running qmake (twice when cross-compiling) on
config.tests/arch/arch.pro, which preprocesses a file that contains all
knowns processors.
On Windows, configure.exe has never run any config.tests before, and
does not currently have a function to run a program and capture its
output. Use _popen() to accomplish this (as qmake does for its system()
function). This needs to be done after qmake is built, as does the
mkspecs/qconfig.pri generation. As a side effect, the configure steps
have been slightly re-ordered, but the overall result is the same. The
displayConfig() call is moved to just before generating Makefiles, so
that it can show the detected architecture(s).
Change-Id: I77666c77a93b48848f87648d08e79a42f721683f
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
the feature is rather obscure and unlikely to be used by anyone.
Change-Id: I2dfb4ca4d5d1f210d385c013f46bc6389fd6ea2d
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
make is perfectly capable of doing shadow builds
Change-Id: I7e1c27cddc385b7a17ae5645b9cd26fa56d2f029
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
.qmake.cache is not necessarily accessible to other modules which depend on
information about whether we are cross compiling or not. We might as well
advertise this fact globally via the CONFIG variable in qconfig.pri.
Change-Id: I6dee3e6604e5ca1c775c5f9f834fe29b4e27adb8
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
the tool locations are now determined with qtPrepareTool(), which takes
non-installed qt builds into account already.
Change-Id: I17b2c5f4b181417f2a612be2f540768e7dc0ae4e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This will be used later on as a base class for QTemporaryFile and
QSaveFile.
Change-Id: Ic2e1d232f95dc29b8e2f75e24a881ab459d3f037
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Do not write Q_BYTE_ORDER to qconfig.h in the configures. Instead,
we #define Q_BYTE_ORDER in qprocessordetection.h, since many CPUs only
support a single endian format. For bi-endian processors, we set
Q_BYTE_ORDER depending on how the preprocessor sets __BYTE_ORDER__,
__BIG_ENDIAN__, or __LITTLE_ENDIAN__ (instead of using a compile test
to do so).
For operating systems that only support a single byte order, we can
check for Q_OS_* in addition to the preprocessor macros above. This is
possible because qprocessordetection.h is included by qglobal.h after
Q_OS_* and Q_CC_* detection has been done. Do this for Windows CE,
which is always little- endian according to MSDN.
Change-Id: I019a95e05252ef69895c4b38fbfa6ebfb6a943cd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This fixes the build for Visual Studio 2011.
Change-Id: I8c43eef851d76f8cdde13a57ea3dcd9cf32df0ab
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
the only difference is in the copy & del commands. the msys tools are
tolerant about windows paths, so this just works.
the in-makefile variant detection is stolen from tools/configure/.
Change-Id: Ia283c1fe2e2aaa8cd5b1dfd7ae29244115f07d65
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
instead of being a variable added to the makespec (via qconfig.pri),
QT_SYSROOT is now a property.
the QT_INSTALL_... properties are now automatically prefixed with the
sysroot; the raw values are available as QT_RAW_INSTALL_... - this is
expected to cause the least migration effort for existing projects.
-hostprefix and the new -hostbindir & -hostdatadir now feed the new
QT_HOST_... properties.
adapted the qmake feature files and the qtbase build system accordingly.
Change-Id: Iaa9b65bc10d9fe9c4988d620c70a8ce72177f8d4
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
switch blocks are noisy. this is nicer.
reshuffled the LibraryLocation enum to make table lookups possible and
future-safe.
using pointer-free tables to avoid adding data relocations.
Change-Id: I70ec2c2142ce02a15e67284e4b285d754d930da3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
After commit e0acf65043, configure.exe
built with the x64 compiler could detect the same compiler twice,
breaking the -platform detection even when only one compiler is in the
path. Fix this by taking advantage of the CompilerInfo struct ordering
and ignore detection of the same compiler.
Change-Id: I583230520d2e0859196f9d7c8af31adbb981a6ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Makefile.mingw was using the test command which requires sh.exe. This
adds support for bootstrap using cmd.exe instead.
Change-Id: Ieb67843170d2745ce119cc8feaa5433aa82fd7d7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
x86 processes get redirected to the 32 bit area of the registry,
while 64 bit processes access the registry in raw form.
Added the registry paths for 64 bit processes to see the 32 bit
registry keys for MS visual studio. (Wow6432Node)
This problem was revealed when we stopped including configure.exe
as a binary checkin to git. Running configure in an x64 compiler
environment results in creating an x64 configure.exe
Change-Id: I5e3e51ddbf20ccc65abf1833bf23ee5670bd973e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
it is *ugly* to have the binary in the repository.
this adds a few seconds to the windows build, as the configure needs to
be rebuilt, obviously. that's almost negligible.
Change-Id: I40ffde23b3c3af2b6bab3e78cd0a9f433214b563
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
it doesn't serve any puropse (any more?) and it breaks the mingw build.
Change-Id: I02a5e7502586e7e9f5956991498ff602eff66e81
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Check the QT_OUTPUT_PATTERN environment variable in the default
message handler to customize the output of messages. Following
place holders are right now supported:
%{message}, %{type}, %{file}, %{line}, %{function}
The original cleanupFuncinfo was written by Thiago Macieira.
Change-Id: I6ad25baaa0e6a1c9f886105d2a93ef3310e512a9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: David Faure <faure@kde.org>
Before -mp and -no-mp affected only projects built with Qt.
There was no way to turn off msvc_mp for the Qt build.
Qt projects can add msvc_mp themselves.
Task-number: QTBUG-23929
Change-Id: I08b9ec762c59d2604635d73396044a74f717728c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
For shadow builds configure creates syncqt script to shadow build
directory tree calling the original syncqt from qtbase source tree.
This wrapped script will add two default parameters when calling
the original script. Both parameters are overridden in
qtbase/mkspecs/features/default_pre.prf and are not needed except by
configure script itself in latter stages where the parameter should be
applied explicitly in shadow build condition branch.
In addition, it adds the qtdir parameter for the forwarded syncqt call to
indicate the location of qt sources for the syncqt. This also will give
correct qmake path for qtmodule-configtests script triggered from syncqt.
Changes are done both for Linux and Windows configure.
Change-Id: I307b2e76c203ee14b849f10ff629f9668da2f223
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The tiff plugin and bundled libtiff is moving to the qtimageformats
project on Gerrit.
Task-number: QTBUG-23887
Change-Id: I4c848232fdccddd7e7f54215f9eaa78dc4c3a53d
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This removes the options to disable several modules, as they are in
separate repositories now and can be "disabled" by simply not compiling
them.
Note that this leaves some configuration options for these separate
modules in, as they have no own configures. This is ugly, but has to
stay that way for the time being.
Some other dead code had to go as well, just like accepting the obsolete
-qdbus option.
Change-Id: Ibb26e4f48ca8239c2c4396e4abefab4c87322be2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Added PCRE config.tests, and logic and command line options
(-qt-pcre and -system-pcre) for configure and configure.exe.
Change-Id: I5da2658191198dbcf48c07d7c5de1be1b884a7a5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The MNG file format is generally abandoned, and libmng has been
unmaintained for several years.
The MNG plugin and bundled libmng has been moved to the
qtimageformats project on Gerrit.
Task-number: QTBUG-21869
Change-Id: I946432347014ffde2b72307a5f8b166ca5553602
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This method has been deprecated since Qt 4.2.
QDir::toNativeSeparators() replaces it since then.
Change-Id: I49e6e1bfd50f26aa30134e599ee82067709549a7
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Avoids conflict with macro on Mac OS.
Change-Id: I3426c2dc514240d80996d823b7a552c13a09f99e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
At the moment users of Qt must detect if it was compiled with SSL
support by testing for QT_NO_OPENSSL. This means that any code that is
conditionally compiled this way is tied to the presence of the openssl
backend. This commit makes it possible to implement new SSL backends
during the Qt5 lifetime without breaking this code. People can still
test for QT_NO_OPENSSL if they really need openssl, but if they simply
want to know if there's SSL support at all they should use this define
instead.
In addition, this commit changes the public API headers to use the new
define.
Change-Id: Ib57a71aa65836ac9351f120a487bfeb8009d9515
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
There's no good reason to still differentiate between 'Nokia' developers,
and Qt developers outside of Nokia, inside configure. Just use
-developer-build -opensource -confirm-license.
Change-Id: I8726947dae0c70412eb52bf9d88eda4aa061ef26
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Remove the (-no)-qt3support options from configure, and remove the last
remaining references to Qt3Support, QT3_SUPPORT, and
QEvent::ChildInserted.
The compatibilityChildInsertEvents() tests in tst_QObject and
tst_QWidget have been renamed to childEvents(), which is a more
appropriate name.
Change-Id: Id0b45e9b177efcc8dceee8c9ed8afafedeeace2f
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
These should go into qmodule.pri, rather than .qmake.cache, as they
make sense for all Qt modules - not only qtbase.
Fixes link failure when building qtdeclarative with jom on Windows.
Change-Id: I3e8b207e1808cb23af58b865a160c2fafa906288
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
In a Qt 5 world, these have no relevance, so remove them.
Task-number: QTBUG-23022
Change-Id: I2f52c7aa1fcb8234046dd95b4d702791d20514fa
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Tests will install under $$[QT_INSTALL_TESTS].
TESTDATA may be used to install additional testdata required by the
test.
The default install rule may be disabled by
CONFIG+=no_testcase_installs.
Change-Id: I204de60c8e844775906ffd016ca50bffbb414142
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
A V8 snapshot is a serialized representation of the JavaScript heap.
Using a snapshot can vastly speed up V8 initialization.
This commit introduces a new tool, mkv8snapshot. mkv8snapshot is
automatically invoked as part of building QtV8, and generates a .cpp
file which is compiled into the QtV8 library.
Because mkv8snapshot itself needs to initialize the V8 environment
the non-snapshot way (i.e., by evaluating thousands of lines of
JavaScript), it needs to build all of V8. This means that V8 is
effectively built twice when snapshots are enabled.
When cross-compiling, only host=i386 and target=arm is supported,
since that's the only relevant case for which V8 currently
supports a simulator. mkv8snapshot is built and run as a host tool
(using the simulator), and generates a snapshot that will be used
on the target.
Task-number: QTBUG-21152
Change-Id: I9270652f129505508f78db8b0a39fbf57dc8b86d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
