The old code was completely broken. It did dereference
val for user types, but val does in this case only contain
garbage. Instead use the pointer to the correct data.
Change-Id: I20ccf0bfa3dd3774c787d08c51cc8dd7b1ec9a1a
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
A well formed JSON document is not allowed to contain
trailing garbage at the end. Don't accept this in the
parser.
Task-number: QTBUG-40062
Change-Id: I0a09dbd099a8c643f58023342546c4e67d026fec
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The comparison operators between QJsonPrivate::String
and QJsonPrivate::Latin1String weren't all correct, leading
to wrong sorting of keys in QJsonObjects when the keys were
outside of the latin1 range and resulting lookup errors.
Task-number: QTBUG-41100
Change-Id: Idceff615f85d7ab874ad2a8e4a6c1ce8c2aa0f65
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
focusObjectInputMethodQuery() and sendInputMethodEvent() were not
thread safe. Remove them, and replace with thread safe versions
based on the same principle as queryFocusObjectThreadSafe().
Task-number: QTBUG-40995
Change-Id: Idb6f0c6d3963b7e8e73e029e83d0367088146ca8
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
It has no effect and inhibits move semantics.
After this change, two and five more copies are moves in QtGui
and QtWidgets, resp.
Keep the old form for compilers that mangle the return type.
Change-Id: I6257683144110230079fe9095303907ecc858c94
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Unlike ordinary widgets, the ones that have OpenGL framebuffers must know
about screen changes because the device pixel ratio may be different on
the new screen. Add an internal event, ScreenChangeInternal, as the
counterpart to WindowChangeInternal.
Change-Id: I5e55999838e4c0284e7d9832299f7cc6b541ee3f
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
The language support detection in Cocoa does not report the correct
set of languages for all fonts. One consequence of this is that e.g.
Mkhedruli (Georgian) was not supported on Mac because the
'ka' language code was not reported for e.g. the Arial Unicode MS
font.
This was never detected in Qt 4, because the writing system support
we set for each font was never used for font matching, since we let
CoreText do the matching in Qt 4.
To remedy this, we also detect writing system support based on the OS/2
table in the font. We add this in addition to the current test in case
the language list has information about fonts with incomplete OS/2 tables,
to avoid regressing.
[ChangeLog][OS X] Fixed detection of writing system support in fonts for
some scripts such as Mkhedruli.
Change-Id: I26c2a42ef45112e17d6794d8798a57c8d8aaaafa
Task-number: QTBUG-41208
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Updating the geometry and available geometry in two steps means that
QScreen will be in an inconsistent state when emitting the geometry
change signal, as the available geometry has not been updated yet.
Piggy-backing changes to the availableGeometry based on the virtual
geometry changing does not make sense, so we now tie geometry and
availableGeometry (and their size variants) to their own separate
geometryChanged and availableGeometryChanged signals.
Change-Id: Iee0ced642cbb91c470cb54bc507d2c0512482c13
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
This follows the discussion at:
http://lists.qt-project.org/pipermail/development/2014-June/017225.html
Qt WebEngine will have a version of 1.0 when released with Qt 5.4.
The library name is currently libQt1WebEngine.so.1.0.0 but it should
rather be libQt5WebEngine.so.1.0.0 to represent Qt's major version
releases as a whole and not the major version of the module. This
prefix essentially expresses the module's dynamic linking
compatibility with other Qt modules.
This only makes sense if each major module release will be compatible
with a single Qt major version only.
All published modules currently already have 5 as their major version,
except qtenginio which doesn't use a Qt prefix, so this change has no
effect except for qtwebengine.
Task-number: QTBUG-30910
Change-Id: I894e7a367624c7fc263cf08104173a82eafd1439
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
With the recent changes in QDoc, we can no longer assume that
pages listed in the TOC are of type DocNode. For example, all
Qt modules want to list C++/QML type index pages in the TOC,
and those are now of type CollectionNode.
This change fixes the issue by using a more generic search
function when generating the .qhp TOC, one that doesn't
restrict the results to any specific node type. As an
exception, the main index page for a project must still be a
DocNode, i.e. a page declared using the \page command.
However, we do want to restrict the search to the pages in
this documentation module only - for that purpose, a function
for setting a local search order is introduced.
Task-number: QTBUG-40241
Change-Id: Ibaa5af9c5de6436f34b7ae67e56733817fc090b9
Reviewed-by: Martin Smith <martin.smith@digia.com>
If you configure QOpenGLWidget to use sampling, the 'resolvedFbo' isn't
updated during resizing. This leads to garbled views.
Change-Id: I9f9265520134bcf12436778773507df936c5fbb6
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
According to the XDND standard (http://www.newplanetsoftware.com/xdnd/)
if the proxy window exists then it should be checked for the XdndAware
property rather than the target window directly.
c3f9de6296 introduced the mistake.
In the old code the proxy window was used.
Change-Id: I83b66d4b1f08a1f44d5c1451d0f1735c084bcf09
Spotted-by: Alexander Smirnov
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
In both cases theme.rect calculated right after the
"sub & SC_ScrollBarSlider" test.
Change-Id: I9fa0c4e1327e68b4184674a13e7a4bf362f8deff
Reviewed-by: Adam Majer <adamm@zombino.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
If defined, the value of this variable is prepended to the built shared
library's SONAME identifier.
For more information, see: qmake/doc/src/qmake-manual.qdoc#qmake-soname-prefix
Task-number: QTBUG-31814
Change-Id: I4bceaf0c93162e4fad6bb424af1b82e74d38acdc
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
QOpenGLWindow already has some notes regarding this. It must be
mentioned in QOpenGLWidget too.
Change-Id: I0af90c9410a1c44cb9dd9ce58aa0371a58c57f65
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Make it clear that the class is usable regardless of the OpenGL version
the app is targeting. It may just do nothing.
Change-Id: I50e68a46e36ef1f4694016311af93c6f8719ce4f
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
To convert coordinates to a parent's coordinate system one should
translate them by an offset of a child widget relative to it's
parent widget. QRect::moveCenter() doesn't translate, it sets
the coordinates of the touch point's center to this offset.
Change-Id: I9d823784803bd1448c0d665944090674d3ff518b
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Otherwise the protos are not pulled in so the ANGLE-only build cannot
suceed (unless the flag is defined from somewhere else).
Task-number: QTBUG-41164
Change-Id: I959d154da88f7ccc8159ec7e810ffdba0e7f50ea
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
While GCC 4.4 has the required header, it is missing important
typedefs requiring use of pointers instead. This is acceptable if only
used in one or two places, but a quick search through the source code
lists quite a few usages of const_iterator typedef.
$ git grep -c initializer_list\<.\*\>::const_iterator
src/corelib/global/qflags.h:2
src/corelib/json/qjsonarray.h:1
src/corelib/json/qjsonobject.h:1
src/corelib/tools/qhash.h:2
src/corelib/tools/qmap.h:2
src/corelib/tools/qset.h:1
The lesser-evil is to bump Q_COMPILER_INITIALIZER_LISTS to version
GCC 4.5 and retain usage of required (by standard) initializer_list
typedefs.
Change-Id: I38d6fa0ef3dc7d958587b406d33e3e3a7378c026
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We have no business defining types which come from another library.
These originally stem from the S60 port without further explanation
and Qt and its examples today compile without them, so remove them.
Change-Id: I683ea897c00ab3a1f7c809c45352fe590ae9a41f
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Use the new dedicated field instead of just assuming that the evaluation
timespan is buildtime + 30 days.
Change-Id: Ibf4078f030ea609d823fe01889a106a5da345817
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Iikka Eklund <iikka.eklund@digia.com>
It was decided not to port the handling of the saved
screen size to Qt 4.8, so, bump the major version to
ensure Qt 4.8 bails out.
Task-number: QTBUG-38858
Change-Id: Ia870519553172cd383830d9a722b0fada180ee1b
Reviewed-by: Alessandro Portale <alessandro.portale@digia.com>
Windows does not automatically move WS_EX_TOOLWINDOW type windows.
Task-number: QTBUG-39320
Change-Id: If9804f32beb534a27ba649abf5eaceb686af8f50
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This makes non-OpenSSL backends able to handle to certificate
extensions.
This also converts the Q_OS_WINRT #ifdef's in the unit test to
QT_NO_OPENSSL as the behavior is the same for any non-OpenSSL
backend.
Change-Id: I6a8306dc5c97a659ec96063d5a59cee2ee9a63a9
Reviewed-by: Richard J. Moore <rich@kde.org>
This commit adds id tags with the anchor reference as the value
to html entities for documentation section titles and function
signatures, properties etc. for both C++ and QML documentation
pages.
Together with new CSS rules, we can dynamically highlight the
title that the user clicked on. This helps to locate the item
of interest on a crowded page or when the page cannot be
scrolled down enough to place the selected item on top.
Change-Id: I7d1db2ed4e12779e1a9e571996ee65c3befa4e7a
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Venugopal Shivashankar <venugopal.shivashankar@digia.com>
Don't wait for the GUI thread when it's already waiting for us.
An application that uses the virtual keyboard may get an inputmethod
query just when it is being suspended. If the GUI thread is already
blocking on a semaphore at that point, waiting for the android thread,
we really do not want to wait for the GUI thread...
Task-number: QTBUG-40955
Change-Id: Iea2cf0dd058a41a897d596c4bcf16f0508adb20b
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
When we suspend the app, we destroy the surface to save resources.
We don't want to create it again just as we are shutting down.
Task-number: QTBUG-41072
Change-Id: I7a616249bee869b92716d0911201a80d73c2f8da
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
Currently the peerVerifyError test for QSslSocket makes an assumption
about the order in which SSL errors are emitted by peerVerifyError. This
assumption does not necessarily hold for non-OpenSSL backends.
This change fixes this assumption, and also checks that HostNameMismatch
was found both in the errors emitted by peerVerifyError and by sslErrors.
Change-Id: I856d1ea43b36332db0f178d35fc14a4bb18ad673
Reviewed-by: Richard J. Moore <rich@kde.org>
Some of the QSslSocket tests use OpenSSL-specific symbols. This
change fixes this issue.
Change-Id: Ib67efa42a15facaf0ad34fc0466341a37d945d1e
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Metrics obtained from the system must be scaled down
when device pixel ration scaling is in effect. Factor out
functions to return the device pixel values which might still
be used for drawing.
Task-number: QTBUG-38993
Task-number: QTBUG-38858
Change-Id: I6b90629e4979436bbb46f8c1fa1ee2253ada7ece
Reviewed-by: Alessandro Portale <alessandro.portale@digia.com>
Also, remove the -angle-d3d11 configure option, as it no longer is
necessary to select the renderer at build time.
The D3D11 renderer is the default renderer in upstream ANGLE, and has
been shown to be a more reliable solution for developers running over
remote desktop and inside virtual machines. It also provides more features
to the OpenGL ES implementation.
This configuration switch does not disable the D3D9 render; if the GPU
does not support D3D11, D3D9 is used instead.
[ChangeLog][QtGui][Windows] The ANGLE D3D11 renderer was enabled by
default. Systems which cannot use the new renderer will automatically fall
back to the D3D9 renderer at runtime.
Task-number: QTBUG-41031
Change-Id: If894309c07d9309c236b63c36f37679f74375133
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Tim Jenssen <tim.jenssen@digia.com>
The code says
bool QRect::isValid() const { return x1 <= x2 && y1 <= y2; }
so the documentation should say <= as well, rather than <.
Change-Id: If52005879d2a758b5d1d64b552e6cd96341fae76
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
No need to allocate dynamic memory for a fixed-size point array
when QPainter has a (QPoint*,int) overload.
This one is a bit more complicated, as the QPolygon was returned
from a helper function, so I wrapped the array in a minimal
std::array-like StaticPolygonF.
Together, these four QPolygon -> QPoint[] changes result in
ca. 4.5K text size reduction for libQtWidgets.
Change-Id: I082f199d5edb7a7782173fe3748220f373edac8a
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
No need to allocate dynamic memory for a fixed-size point array
when QPainter has a (QPoint*,int) overload.
Change-Id: Ie1eecd376a52b73572998ba253a032deaa0daaf9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
No need to allocate dynamic memory for a fixed-size point array
when QPainter has a (QPoint*,int) overload.
Change-Id: Ifdf8224ddffe06ef7848562023e372e2c32b9ad6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
No need to allocate dynamic memory for a fixed-size point array
when QPainter has a (QPoint*,int) overload.
Change-Id: I50c69103bba47e9f6de4f5616e8f40fee522ddc2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
