Instead of waiting for the menu delegate to update each item,
we can attach an NSMenu to its NSMenuItem as soon as we update
the current window's menubar. This is safe to do because we
know that this is going to be the main menubar right after, so
we're not orphaning any NSMenuItem from its NSMenu at the wrong
moment.
By doing this, we also ensure that all menus from the active
menubar are reachable by the key-equivalent dispatching logic,
even before we display the actual menu.
This was shown in BigMenuCreator where, under the menubar's ASP
and SAP menus, all A*S submenus would be disabled. Furthermore,
on the same menus, SAP would show the same issue.
Added test in Menurama as well.
Change-Id: If6e7311072e6b53ad1cbced73623d1832aa0df8e
Task-number: QTBUG-57076
Task-number: QTBUG-63712
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
We have found that there are three important operations
when it comes to menu creation and putting it up in the
native menubar:
* Adding the action to its parent menu
* Setting the submenu as the action's menu
* Populating the actual submenu
This application tests all possible permutations for these
three operations, starting from the menubar and down two
more menu levels.
Two command-line options allow, first, to create a late
menubar that will replace the original menubar from the main
window form (--new-menubar) with, second, the option of
creating it parentless (--no-parent) before setting it as
the new main window menubar.
While mostly interesting for platforms supporting QPA menus
and menubars, this could be useful as a trivial check for
QMenu and QMenuBar in a pure QWidget environment.
As of today, the application shows at least three issues on
macOS which will be fixed in upcoming patches.
Change-Id: Id3c1e0f346c6fe27ab4656ff045b88a0a8623740
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
We need to ensure that simultaneous touch and tablet input is possible.
Change-Id: I0c0d06e382b6b89e11ed06c1e4ad0db63b3b7c82
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Before this patch a very accurate drop position below
or above an index was needed. Therefore it was not that
easy to do.
This patch increases the above/below area to be about
18% of the item (still leaving the most space for the item).
An average user will likely be 2-3x faster with dropping
below or above (while not losing much when dropping on items).
[ChangeLog][QtWidgets][ItemViews] Made it easier to
drop above and below items.
Change-Id: I47f0f80c76878c17ebf3f93d0a0cc82755971c2a
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
All systems must implement it by now. If there's any system still
without it, that means it has no IPv6 support, so they can disable
QtNetwork entirely.
[ChangeLog][Deprecation Notice] Starting with Qt 5.10, IPv6 support is
mandatory for all platforms. Systems without proper IPv6 support, such
as the getaddrinfo() function or the proper socket address structures,
will not be able to build QtNetwork anymore.
Change-Id: I3868166e5efc45538544fffd14d8c28046f9191b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Proximit events are sent to the QGuiApplication, catch them via
event filter.
Change-Id: I7f896e7d9f5c90347b9e3c708feb69abd1c5fc95
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Child QWindows (or in the case of QWindows embedded in native applications:
top level QWindows where the corresponding NSView is a child of another
view, so not being the contentView of its window), still need some of the
NSWindow notifications to e.g. update their exposed state when the window
becomes visible.
We make sure to send the notification to all QCococaWindow children of
the relevant NSWindow, and let each callback decide if it should only
apply to content views.
This fixes an issue where a QWindow would never be exposed if the window
was a child NSView and added to a NSWindow that was yet to be shown.
Change-Id: I7f7df8bc5f4ca3ac553a2c146f8c3229b197c059
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The following enumerations were obsolete for a log time but not marked
as deprecated:
- WA_NoBackground
- WA_MacNoClickThrough
- WA_MacBrushedMetal
- WA_MacMetalStyle
- WA_MSWindowsUseDirect3D
- WA_MacFrameworkScaled
- AA_MSWindowsUseDirect3DByDefault
- AA_X11InitThreads
- ImMicroFocus
mark them as deprecated and remove the usage inside QtBase so they can
be removed with Qt6
Change-Id: Ia087a7e1d0ff1945286895be6425a6cceaa483fb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
A QTextDocument can now be written out in Markdown format.
- Add the QTextMarkdownWriter as a private class for now
- Add QTextDocument::toMarkdown()
- QTextDocumentWriter uses QTextMarkdownWriter if setFormat("markdown")
is called or if the file suffix is .md or .mkd
- Add QTextEdit::toMarkdown() and the markdown property
[ChangeLog][QtGui][Text] Markdown (CommonMark or GitHub dialect) is now
a supported format for reading into and writing from QTextDocument.
Change-Id: I663a77017fac7ae1b3f9a400f5cd357bb40750af
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
This is done by adding a QWindowPrivate::allowsClickThrough() function,
so this could easily be adapted later on if desired for other
platforms.
Fixes: QTBUG-41126
Change-Id: I1157e5e7e7667ff11d1a5d21b3ce8c4b13202272
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
There's no need for us to walk our own ancestor chain to figure out which
cursor to set. AppKit will automatically call cursorUpdate: on the view
that would be the hitTest target of the current mouse position, and by
falling back to super when no cursor is set for the current view, we
automatically get the behavior that effectiveWindowCursor tried to solve.
In addition, it solves the case of applyEffectiveWindowCursor applying
the arrowCursor when no cursor was set, which would mean that if any
native parent view of our view _did_ have a cursor set, we would not
fall back to the native view's cursor, but instead override it with
the arrow cursor. Following the responder chain gives the correct
behavior in this case.
Unfortunately, due to rdar://34183708, if a subview of one of our
views uses the legacy cursorRect approach to cursor management, the
cursor will not be reset back to our cursor via cursorUpdate: when
leaving the child and entering the parent view (our view). Moving
our implementation over to the legacy API would solve this problem,
but just propagate it to native parent views of our views, which
could potentially use NSTrackingAreas, and would not have _their_
cursors re-set.
Change-Id: Id20cc03136f0b1d4b9120750fe63ddc455363aaf
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
- Add view to contentView, to allow checking parent view interaction
- Render via requestUpdate instead of manual timer
- Add two windows to check subview interaction
Change-Id: Ib028e62f585d45e42c0429e69ea6f45c8a90fe54
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
Change c12072c685 fixed a problem
where tab labels would overlap with the icons if the tab became
too small to contain the text. But it did not properly account
for the full area occupied by the icon, because the horizontal
padding is hardcoded to 4 in the mac style, whereas in the
common style (where the icon is drawn) it uses the pixel metric
for this.
In addition, the change only allocated space on the left side,
causing the label to no longer be centered.
Task-number: QTBUG-61235
Change-Id: Ieec4f7044584361f92045addbc8bbd81bd5c9fc7
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Calling -[NSMenu update] every time we add a new item can result in
a quadratic behavior since the function itself will iterate over all
the items in the menu. We solve this by using a 0-timer which will
trigger the call to update the next time the event loop spins.
Menurama manual test updated.
Change-Id: Ic155d364515cc93eb81b1c8085c8e44c93799954
Task-number: QTBUG-62396
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Conflicts:
src/widgets/kernel/qwidget.cpp
This merge also extends the expected output of the pairdiagnostics
teamcity output (added in dev in commit
c608ffc56a) after the recent addition of
the flowId attribute to the teamcity output (commit
8f03656211 in 5.9).
Change-Id: I3868166e5efc45538544fffd14d8aba438f9173c
It was working on Linux because _GNU_SOURCE gets us POSIX.1-2008
compatibility, but not on macOS or the BSDs. There, we were still stuck
to full second precision.
This commit uses the template trick introduced by the futimes code
(which itself was inspired by commit 2fb42eb4af
in QtNetwork). Also note how it adds support for birth time, if the
system's stat struct has that information.
Tested to work on MacOS and FreeBSD. The manual filetest produces:
Name: .
Path: . (/usr/home/tjmaciei/src/qt/qt5)
Size: 1536 Type: Directory
Attrs: readable writable executable hidden nativepath
Mode: drwxr-xr-x
Owner: tjmaciei (1001) Group: tjmaciei (1001)
Access: 2017-07-13T20:03:47.916
Birth: 2017-07-13T20:03:47.916
Change: 2017-07-13T20:04:41.648
Modified: 2017-07-13T20:04:41.648
Linux will require support for statx(2).
Change-Id: I8d96dea9955d4c749b99fffd14cd97d7a8c6d45d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Commit 32a94e54 changed the API of the QPS engine (PaintCommands
class). Update the usage accordingly.
Change-Id: Ide57609e636dad0aa434d1049b600b72f731bc30
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Covers non-document mode, tab icon, and adds a more
useable interface. Some parts are still missing, like
tab orientation and long tab titles.
Task-number: QTBUG-61092
Change-Id: Idbda84f513e3ff7f87fa04ae4476b11bd8bb6bf2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Fix regression introduced by 175f33ed8. 'expanding' property set to true
was ignored when QStyle::styleHint() returned Qt::AlignRight for
SH_TabBar_Alignment.
When we calculate tabs geometry, we put an empty tab at the front and
back and set its expansive attribute depending on tab alignment AND
'expanding' property.
Task-number: QTBUG-61480
Change-Id: I6a1827ae8a3f2c6bee5124c18c7f2b1c0a7862f3
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Change-Id: Ia0eddcb385207ada8c3df59d49ff1de27a2aeb71
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In FileDialogPanel::options(), QFileDialog::DontUseCustomDirectoryIcons
was set when the "Don't use custom directory icons" box wasn't checked.
Change-Id: I6e9d9b41cf91f4abcc98c02bed44675908a8391d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We have been noticing several menu popup sizing issues
in the presence of multiple, heterogenous displays.
Most remarkably, we'd often pick the primary display's
geometry when computing the menu's size hint. This results
in usability issues if the primary display is smaller than
the display onto which the menu popup is being displayed.
This manual test covers menu bar, context and push button
menus. Torn-off menus are also enabled. We turn off the use
of native menu bars to cover a few more cases.
Change-Id: I29658ebdc56e41aa1bf99d06d96aed6bfb5461b3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
For Android, Windows and xcb. Verified on Win10 with NVIDIA, Win10
with AMD, Android with Tegra K1, Android aarch64 with Tegra X1, and
Linux aarch64 with Tegra X1 (Jetson TX1, L4T).
Introduce QPA-based Vulkan library loader, core function resolver, and
instance creation support. In addition to creating a new VkInstance,
adopting an existing one from an external engine is supported as well.
The WSI specifics are hidden in the platform plugins. Vulkan-capable
windows use the new surface type VulkanSurface and are associated with
a QVulkanInstance.
On Windows VULKAN_SDK is picked up automatically so finding vulkan.h
needs no additional manual steps once the LunarG SDK is installed.
[ChangeLog][QtGui] Added support for rendering to QWindow via the Vulkan
graphics API.
Task-number: QTBUG-55981
Change-Id: I50fa92d313fa440e0cc73939c6d7510ca317fbc9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
don't attempt to hand-craft a library export any more. instead, use the
configure system's built-in mechanism, and refer to it via QMAKE_USE.
this also allows us to rely on transitive dependencies in the autotest.
as a side effect, this makes the openssl-linked feature imply the
openssl one.
Change-Id: I5dd209b63bc8fbbc62852f6ffc472d4452ea2e68
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The controls need to reflect the facts that e.g. maximized and fullscreen
can both be set at the same time, the same way a window can be minimized
and fullscreen.
Change-Id: I7f3e354a5efaefb9f51e6b1f24fa35980fe35899
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Makes operations like minimizing a window happen "behind the scenes"
because the window is hidden during the state change.
Change-Id: I01a00661e57f2dcfa6aef78ee0cfa36fbed1bb03
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Have a widget-based application that uses qTriangulate for fills
and QTriangulatingStroker (and optionally the dash stroke processor)
for strokes.
The resulting triangle (strip) set is visualized on a simple QPainter
canvas, offering the ability to zoom in and examine how the triangulator
behaves on a number of example shapes. It is also possible to step through
and only have the first N set of triangles drawn.
Change-Id: I3a27d86d4ea13a63dd4be0fe81dd4b5ed6e4fa75
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This change allows painting via QPainter onto a QOpenGLWindow, QOpenGLWidget
or QOpenGLFramebufferObject when an core profile context is in use. This is
important on macOS in particular, where compatibility profiles are not
available, and so the only way to use modern OpenGL is via a core profile
context.
Added core profile compatible shaders with moder GLSL keywords.
The paint engine binds a VAO and two VBOs from now on, whenever VAOs are
supported. Note that this changes behavior also for OpenGL 2.x context that
have VAO support via extensions.
The Lancelot test suite gains support for core profile contexts. This can
be triggered via -coreglbuffer in place of -glbuffer when manually inspecting
via 'lance', while tst_lancelot will automatically run core context-based tests
whenever supported.
Task-number: QTBUG-33535
Change-Id: I6323a7ea2aaa9e111651ebbffd3e40259c8e7a9c
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Sometimes it is desirable to use a new connection but keep already
entered user credentials for usability reasons. This is now possible by
clearing the connection cache (but keeping the authentication cache).
Change-Id: I2f5f64836ce19f81c8525701783a3da823dd468e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Fix warning about unused variable printer in auto-test and redirects
output to qInfo() as intended.
Amends change a26435d65c.
Change-Id: Ia72a93267a54b9c4f9ef37fa058b95ef586ecc75
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Change the main window to contain a QTabWidget and add a log widget
logging relevant events on the top level widgets for testing changes.
In the preview window, add new window flags of Qt 5 and output
geometry, margins and window state in addition.
Change-Id: Icec366223b6c163d58a69034687f3d9323a91533
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
When a menu item's enabled state changes after
-[QCocoaMenuDelegate menuWillOpen:] is invoked, i.e.,
during or after QMenu::aboutToShow() is emitted, that
state change may not be taken into account. This is
because the automatic menu validation, upon which Qt
relies, is not made aware of any such change.
By calling -[NSMenu update] when syncing the QPA menu
item, we induce Cocoa to invoke -[QCocoaMenuDelegate
validateMenuItem:] and ensure that previously synced
items, whose state may have changed, will be properly
updated. This, however, has a small side effect, namely
that menu-holding items will also go through the automatic
menu enabling path and may appear disabled since, until
now, they were not properly configured. In order to solve
this, we set the action on those items as well, and make
sure that both of QCocoaMenuDelegate's relevant methods,
validateMenuItem: and itemFired:, properly process
menu-holding items.
Menurama manual test updated accordingly.
Change-Id: I62f955538b8be09b8494ea0ce87fca7910148d38
Task-number: QTBUG-56850
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The existing cursor logic had a couple of issues:
- It made the faulty assumption that we could not use
the NSWindow invalidateCursorRectsForView API for
child NSViews.
- It used NSWindow invalidateCursorRectsForView and
NSView resetCursorRects. This API has been replaced
by the more general NSTrackingArea API.
- It did not implement falling back to the parent
window cursor if the current window has no cursor
set.
Document that QWindow cursors work the same way as
QWidget cursors in that a QWindow with no set cursor
will fall back to the parent window cursor.
Change the cocoa platform code to use NSTrackingArea
exclusively and implement NSView cursorUpdate which
sets the cursor. Handle immediate change on QWindow::
setCursor() manually.
Add QWindow::effectiveWindowCursor() and
applyEffectiveWindowCursor() which finds the correct
window cursor.
Add a manual test for the child window, child widget,
and QWidget::createWindowChild cases.
Task-number: QTBUG-33479
Task-number: QTBUG-52023
Change-Id: I0370e11bbadb2da95e8632e61be6228ec2cd5e9d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Commit c5db8fc74 changed all instances of Q_WS_FOO to have the prefix
Q_DEAD_CODE_FROM_QT4 instead, to make it clearer when reading the code
that the code in question was a left-over from Qt4, when we used
Q_WS_ defines instead of Q_OS_ defines.
This worked well for cases of #ifdef Q_DEAD_CODE_FROM_QT4, but less so
for cases of #ifndef Q_DEAD_CODE_FROM_QT4, where the code was actually
unconditionally included.
To make this even clearer, the defines have been replaced by checks for
1 or 0, with a comment describing how the code used to look in Qt4. The
use of constants in the check also makes it easier for editors to parse
the condition and show visually that the code is defined out.
Change-Id: I152070d87334df7259b417cd5e17d7b7950379b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This leaves a clearer separation between the foreign-window and non-foreign
window use-cases, where a single QCococaWindow can only be in one mode,
which is determined in the constructor and doesn't change after that.
There are no source or binary compatibility guarantees for the QPA classes,
meaning the helper function in QPlatformNativeInterface can be removed.
Change-Id: I3232aedca1d98c49a8f54e16750832187f9dc69a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QSysInfo::WinVersion, QSysInfo::WindowsVersion,
QSysInfo::windowsVersion(), QSysInfo::MacVersion,
QSysInfo::MacintoshVersion, and QSysInfo::macVersion() are now
deprecated.
QOperatingSystemVersion exists as a more flexible replacement.
Change-Id: Ib97d1bfb260f2595ba3c06ff8fd251c5de41cedc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allows us to detect cases where the requested vsync combination was
not possible to fulfill.
Change-Id: Ie8f3665129f7a1ab7fcefb94b2298d54520b753a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The FPS is now calculated and output on the command line in a single
place. The animated fps counter has been replaced with a vertical line
which should make it easier to observe tearing issues when vsync is
disabled.
Change-Id: Id356fc1958c048d85aba48edfed59124454038d4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The animated FPS counter should be enough to observe smooth animations,
so we use the color of the window to visualize frame latency.
Change-Id: I1171a1c4bdc261ca8655771290c6735357821781
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
[ChangeLog][QtCore][QStorageInfo] Added QStorageInfo::subvolume(), which
returns the name of the subvolume of a volume that was mounted, if one
was detected. This is currently implemented only for btrfs on Linux.
Change-Id: Ib57b52598e2f452985e9fffd1459f3145d733ce5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
cf53aa21bf and 3aaa5d6b32
were reverted because of reconstruction in 5.7.
defineTest(qtConfTest_checkCompiler) in configure.pri is smart
enough to cover the case in a9474d1260.
DirectWrite: Fix advances being scaled to 0
Since 131eee5cd, the stretch of a font can be 0, meaning
"whatever the font provides". In combination with ec7fee96,
this would cause advances in the DirectWrite engine to be scaled to
0, causing the QRawFont test to fail.
Conflicts:
configure
mkspecs/features/uikit/device_destinations.sh
mkspecs/features/uikit/xcodebuild.mk
src/corelib/global/qglobal.cpp
src/corelib/global/qnamespace.qdoc
src/plugins/platforms/cocoa/qcocoamenuitem.h
src/plugins/platforms/windows/qwindowsservices.cpp
src/plugins/platformthemes/gtk3/qgtk3dialoghelpers.cpp
src/plugins/platforms/windows/qwindowsfontenginedirectwrite.cpp
src/widgets/kernel/qapplication.cpp
tests/auto/widgets/dialogs/qfiledialog/tst_qfiledialog.cpp
tests/auto/widgets/dialogs/qfiledialog2/tst_qfiledialog2.cpp
Change-Id: I4656d8133da7ee9fcc84ad3f1c7950f924432d1e
Use the correct method of QMetaEnum to convert enum values to names.
QMetaEnum::valueToKey() should be used, because it takes an enum value
as an argument, while QMetaEnum::key() takes an index of the enum value.
Change-Id: Ie895fcc935e8835e3d9c416ca34be8bfe82fd74e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Changes the --extrawindows option to --numwindows with a default of 3,
and layouts all windows in rows and columns so that they are all
exposed at startup.
Change-Id: I5e8d63a14b778bcddc2fee3bf7e78d6664532b5b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This manual test pretends to be a modest safeguard
against QMenu related regressions on macOS. It takes
a slightly different approach than the existing menus
manual test, tracking observed regressions instead of
providing extensive coverage (though this may change
in the future).
These regressions are listed as task numbers below,
most of them arising from the now infamous change,
09acf326db QCocoaMenu: Decouple NSMenuItem from NSMenu
So, from now on, please run this and the menus manual
tests and look for regressions every time you make a
change regarding QCocoaMenu and related. And, if you're
fixing a regression, add the regression example to the
Menurama manual test.
Task-number: QTBUG-52931
Task-number: QTBUG-53085
Task-number: QTBUG-53251
Task-number: QTBUG-54633
Task-number: QTBUG-54637
Task-number: QTBUG-54698
Task-number: QTBUG-55121
Change-Id: I276e916dcdf00f1a44faf64d87050bc3a037a3b5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
Change QOpenGLTextureBlitter to be a public API, as it was originally intended.
There are now significant external uses outside qtbase (C++ compositor examples
in QtWayland), and the API is considered proven enough.
[ChangeLog][QtGui] QOpenGLTextureBlitter, a utility class to draw textured quads,
has been made public.
Change-Id: If7a2c94e1494195e2aa375d214932fa7b4c78321
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Add a test for embedding Qt windows into foreign windows.
Complements the existing "foreignwindows" test (which embeds
foreign windows into Qt).
The test has a simple UI based on QRasterWindow allowing
for checking events and geometries.
Task-number: QTBUG-41186
Change-Id: Ie62a3e250ca666e2fa5c2e3ef37ef0654829397c
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Conflicts:
src/corelib/io/qtemporarydir.cpp
One side encapsulated a repeated piece of #if-ery in a local define;
the other added to the #if-ery. Made its addition to the other's.
src/corelib/kernel/qeventdispatcher_unix_p.h
One side moved some members into a struct; this collided with a #undef
check that neither side now has. Discarded the #undef part.
src/gui/opengl/qopengltexturehelper_p.h
5.7 deleted a bunch of methods; not clear why merge got confused.
src/tools/moc/moc.cpp
One added a name to the copyright header; another changed its URL.
Change-Id: I9e9032b819f030d67f1915445acf2793e98713fa
Conflicts:
qmake/library/qmakebuiltins.cpp
qmake/library/qmakeevaluator.cpp
qmake/library/qmakeevaluator.h
qmake/project.h
QMakeEvaluator:
* evaluateConditional(): one side changed return type, the other
changed a parameter type.
* split_value_list(): one side changed a parameter adjacent to where ...
* expandVariableReferences(): ... the other killed one overload and
changed the survivor
src/corelib/io/qlockfile_unix.cpp
One side changed a #if condition, the other moved NETBSD's part of
what it controlled.
src/corelib/tools/qdatetime.cpp
One side fixed a reachable Q_UNREACHABLE in toMSecsSinceEpoch(), the
other moved it from the private class to the public one, in the midst
of the "short date-time" optimization, which confused diff entirely.
One side changed a QStringLiteral to QLatin1String, the other rewrote
adjoining code.
src/network/kernel/qauthenticator.cpp
Both rewrote a line, equivalently; kept the dev version.
src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
One side changed #if-ery that the other removed.
tools/configure/configureapp.cpp
One side added a check to -target parsing; the other killed -target.
tests/auto/testlib/selftests/expected_cmptest.lightxml
tests/auto/testlib/selftests/expected_cmptest.teamcity
tests/auto/testlib/selftests/expected_cmptest.txt
tests/auto/testlib/selftests/expected_cmptest.xml
tests/auto/testlib/selftests/expected_cmptest.xunitxml
Regenerated using generate_expected_output.py
I note that quite a few other expected_* come out changed, now.
There was no git-conflict in
src/widgets/kernel/qformlayout.cpp
but it didn't compile; one side removed some unused methods; the other
found uses for one of them. Put FixedColumnMatrix<>::removeRow(int)
back for its new user.
Change-Id: I8cc2a71add48c0a848e13cfc47b5a7754e8ca584
Add a class to display debug messages, providing convenience functions for
installing and formatting parameters like indentation. It prints a startup
message containing relevant information about Qt.
Change-Id: Id0a19adbb5953a6ded1a8e692f242b63748e7273
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Output the class hierarchy until a base class within QtWidgets is found.
Change-Id: I0ecee22e2ead1dea8b39cce8ca2f0739290aac22
Reviewed-by: Alexandru Croitor <alexandru.croitor@theqtcompany.com>
Now that the minimum deployment target (and thus SDK) is 10.9 for OS X
and 7.0 for iOS, all code paths affecting platform versions lower than
the aforementioned are removed.
Change-Id: Id985c7259c4ac069319d88f2c29c9559ae9e8641
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
In German layout, "Ctrl+]" is "Ctrl+AltGr+9".
Task-number: QTBUG-51848
Change-Id: I8c05c13a4d46c0818ce4f56ce476c5310a677af2
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
So we know what we're looking at if there's a test failure. This is like
QNetworkInterface.
Change-Id: Id75834dab9ed466e94c7ffff1444bf51f615e944
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the "generated by qt creator" header is not supposed to be checked in.
Change-Id: I7626c0bd16f83d81b3facd216a04e7d505942256
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Allow tmpfs filesystems to be reported, as they're often usable by the
user, mounted in /tmp and in /run (the fs for $XDG_RUNTIME_DIR).
But disallow anything whose device is not a pathname. This catches most
of everything else that wasn't specifically tested for before, like
virtual fuse filesystems, like GVFS.
Change-Id: I3e15a26e0e424169ac2bffff1417b7cee0f8ec97
Reviewed-by: Ivan Komissarov <ABBAPOH@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The path "/usrfoo" starts with "/usr", so if you tried to get
QStorageInfo("/usrfoo") when "/usr" is a mount point, you'd get the
wrong filesystem.
[ChangeLog][QtCore][QStorageInfo] Fixed a bug that caused QStorageInfo
to report information for the wrong filesystem if there is a mounted
filesystem at a path that is a prefix of the requested path (e.g., it
would report "/usr" filesystem for "/usrfoo").
Task-number: QTBUG-49498
Change-Id: I3e15a26e0e424169ac2bffff1417b7a27cd0132d
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Fix a warning about a missing case statement.
Change-Id: Ic89646704d62668cf83c463dbf6e9b549a4b5200
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
newer versions of qt creator understand QMAKE_EXTRA_COMPILERS and
INSTALLS, so there is no need to list the files twice.
Change-Id: Iccf3cc3248daf3422b8c366c2eb2d2f46c5f08d1
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Remove documentation of enumeration values and code from manual test.
Change-Id: I8e6cbbe11ab38421fb29595ae79351f5a919ff70
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Miter limits below 1.0 are not valid in PDF and trigger an error in the
Reader. This change enforces a minimum miter limit of 1.0, and it adds
a manual test for producing a PDF file demonstrating this issue.
Task-number: QTBUG-52641
Change-Id: I1c78b1c4a44579e95e1cddfb459926d304e60165
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
We have a bug that proximity events are generating them spuriously;
this is a way of testing it.
Task-number: QTBUG-52921
Change-Id: I490dfcf8d5b325f612b733e29fd49de9418bb19e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
They were duplicating other enumeration values
(WindowTransparentForInput, WindowOverridesSystemGestures) and were
only supported on Windows CE.
Task-number: QTBUG-42897
Task-number: QTBUG-51673
Change-Id: I993a933ee2a3dc8a0ebd7ba6aef80b456f50a657
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Add dragging functionality to the labels showing a pixmap
cursor, allowing for testing DnD with pixmaps with device pixel ratio.
Task-number: QTBUG-46068
Task-number: QTBUG-50938
Change-Id: If6781f380864e614efd4328e8b880b57cd900511
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
- QMouseEvent::screenPos() should be global desktop position
- QDesktopWidget::screenNumber() should tell the correct screen
- QGuiApplication::topLevelAt(screenPos) should find the window where
the mouse is clicked
Change-Id: I9a63ab3ee1944b7246551d0f3d5e37f0d2aa5457
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Update files using old header.LGPL3 to header.LGPL
Update files using old FDL template to use new one
Update files using old BSD template to use new one
Change-Id: I36a78272516f9953d02956522f285b40adfc8915
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Apply the device pixel ratio from the widget unless Shift is pressed.
Task-number: QTBUG-46068
Task-number: QTBUG-50938
Change-Id: Ib806b7e545fa228043566800d22d1002728732bf
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Add a toggle for setting a triangular mask on the main window.
Task-number: QTBUG-50938
Change-Id: Id4a3ee0b80e170f4ee1d195e60ce7bfa8e524359
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
Add a command line tool that can either take a list of window ids and output
information on them using a verbose debug stream or embed foreign
windows using QWidget::createWindowContainer().
Task-number: QTBUG-41186
Change-Id: I14e436b5d08828f5b78b29e0701daeffe11367d3
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
It now exists in QtGui.
Task-number: QTBUG-48849
Change-Id: I9107c96e0010252bc50bcb02ef006cb46bd942df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
This also reverts commit 018e670a26.
The change was introduced in 5.6. After the refactoring, 14960f52,
in 5.7 branch and a merge, it is not needed any more.
Conflicts:
.qmake.conf
src/corelib/io/qstandardpaths_mac.mm
src/corelib/tools/qsharedpointer_impl.h
tests/auto/widgets/itemviews/qlistview/tst_qlistview.cpp
Change-Id: If4fdff0ebf2b9b5df9f9db93ea0022d5ee3da2a4
