Saves 0.5KiB on optimized GCC 9.1 Linux AMD64 builds, and is more
maintainable going forward.
Change-Id: I11e6dd33eacf276d1205a63734c66fa7c70c5118
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
9204b8c31e broke font matching on Windows.
This was then attempted fixed by bcd2fa484a,
but this caused an infinite recursion for some cases, so it was reverted
again by 9d1905da9c.
The original issue was that if we populate a specific face of a family,
such as "Arial Black", then the typographic/preferred name will be
detected as "Arial" and this family will be set as populated=true, even
though we have not yet registered any additional subfamilies. In this case,
we need to call populateFamily() for the typographic family name to
ensure we get Windows to enumerate all the subfamilies in that family
before it sets it as populated=true.
But this broke for some fonts where the font naming was unconventional.
In particular, "Yu Gothic" would have its Japanese name as the
typographic name, and there would be no font in the system where
the old-style font family name matched the typographic name. In
that case we would go into a loop where we would try populating
"<Japanese font name>", Windows would translate this to "Yu Gothic", we would
translate it back to "<Japanese font name>", ad infinitum.
In order to avoid the infinite recursion, we add a recursion guard
as well, ensuring that we never call populateFamily() for the main
family we are currently populating.
[ChangeLog][Windows][Fonts] Fixed a bug where it would be impossible
to request different faces of a font family after a specific type face
has been in use.
Task-number: QTBUG-74748
Task-number: QTBUG-74983
Change-Id: Ibe6239f67c45d67ebf75947c8f231cfa177e347f
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
1) Remove a use-after-move. It was benign because the move didn't
actually trigger move assignment, as the original object was const.
2) Remove a usage of insert(hint), as the hint was always end(),
and there is no reason to believe that that's the insertion place.
Change-Id: I71aac8cdc9fb85b6ecef3695bae7b21f022bb60b
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Unlike any other implicitly shared container, QString/QByteArray
have a "lazy detach" mechanism: their operator[] returns a
special object; assignment into that object will actually
detach.
In other words:
QString a("Hello");
QCharRef c = a[0]; // does not detach
c = 'J'; // detach happens here
This allows this behavior:
QString a("Hello");
QCharRef c = a[0];
QString b = a;
c = 'J'; // detach happens here
assert(a == "Jello");
assert(b == "Hello");
Note that this happens only with operator[] -- the mutating
iterator APIs instead detach immediately, making the above code
have visible side effects in b (at the end, b == "Jello").
The reasons for this special behavior seems to have been lost in
the dawn of time: this is something present all the way back
since Qt 2, maybe even Qt 1. Holding on to a "reference" while
taking copies of a container is documented [1] to be a bad idea,
so we shouldn't double check that the users don't do it.
This patch:
1) adds an immediate detach in operator[], just like all other
containers;
2) adds a warning in debug builds in case QByteRef/QCharRef is going
to cause a detach;
3) marks operator[] as [[nodiscard]] to warn users not using
Clazy about the (unintended) detach now happening in their code.
This paves the way for removal of QCharRef/QByteRef, likely in
Qt 7.
[1] https://doc.qt.io/qt-5/containers.html#implicit-sharing-iterator-problem
[ChangeLog][QtCore][QString] QString::operator[] detaches
immediately. Previously, the detach was delayed until a
modification was made to the string through the returned
QCharRef.
[ChangeLog][QtCore][QByteArray] QByteArray::operator[] detaches
immediately. Previously, the detach was delayed until a
modification was made to the byte array through the returned
QByteRef.
Change-Id: I9f77ae36759d80dc3202426a798f5b1e5fb2c2c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The reason for the explicit qt_GetMessageHook call is not related to
Windows CE anymore. It is a work-around used by the Direct2D
integration.
Change-Id: I489665741fc673ab9d29b35a0c02c51f2a9e9288
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
ASAN reports a leak here, so let's delete the style after the widgets
using them have been destroyed.
Change-Id: I0e8603fc5d2d0c13deca35a1c0020646c65eaf49
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
setHtml() or setMarkdown() can result in attempting to load resources
such as images that are needed to render the page. Whenever the
resource has a relative URL, loading depends on the baseURL having
already been set so that a complete URL can be constructed.
QTextDocument::resource() is called to load images, and uses baseUrl().
A little later, QTextBrowserPrivate::resolveUrl() is given an URL that
already has been extended with the baseURL if known; but it has its own
logic to resolve the resource URL against currentURL, or else to treat
it as a local file path if a file exists at that location. The autotest
was relying on this fallback to the local relative file path before; but
now it tests both with a local filename in the current directory for the
source HTML and also with a fully resolved source URL containing the
complete file path.
Also made minor style improvements in tst_QTextBrowser's TestBrowser class.
Change-Id: I46a850015d0e9c5bc5f13b9e37179a9323ab1980
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
src/corelib/tools/qstring.cpp:9505:clang found diagnostics parsing \fn int QLatin1String::indexOf(QLatin1String l1, int from Qt::CaseSensitivity cs) const error: expected ')' error: out-of-line definition of 'indexOf' does not match any declaration in 'QLatin1String'
src/corelib/tools/qstringview.cpp:723:clang found diagnostics parsing \fn qsizetype QStringView::indexOf(QLatin1String l1, qsizetype from Qt::CaseSensitivity cs) const error: expected ')' error: out-of-line definition of 'indexOf' does not match any declaration in 'QStringView'
src/corelib/tools/qstringview.cpp:822:Unknown command '\t'
src/corelib/tools/qstringview.cpp:825:Unknown command '\t'
src/corelib/tools/qstringview.cpp:826:Unknown command '\t'
src/corelib/tools/qstringview.cpp:831:Unknown command '\t'
src/corelib/global/qnamespace.qdoc:2448:Undocumented enum item 'MarkdownText' in Qt::TextFormat
src/corelib/tools/qstringmatcher.cpp:183:No such parameter 'pattern' in QStringMatcher::QStringMatcher()
src/network/ssl/qsslerror.cpp:58:Undocumented enum item 'CertificateStatusUnknown' in QSslError::SslError
src/gui/kernel/qevent.cpp:5321:Undocumented parameter 'screenOrientation' in QScreenOrientationChangeEvent::QScreenOrientationChangeEvent()
src/gui/kernel/qevent.cpp:5321:Undocumented parameter 'screen' in QScreenOrientationChangeEvent::QScreenOrientationChangeEvent()
src/gui/kernel/qevent.cpp:5321:No such parameter 'orientation' in QScreenOrientationChangeEvent::QScreenOrientationChangeEvent()
src/gui/text/qtextformat.cpp:532:Undocumented enum item 'BlockCodeLanguage' in QTextFormat::Property
src/gui/text/qtextformat.cpp:532:Undocumented enum item 'BlockQuoteLevel' in QTextFormat::Property
src/gui/text/qtextformat.cpp:532:Undocumented enum item 'BlockMarker' in QTextFormat::Property
src/gui/text/qtextdocument.cpp:3294:Undocumented parameter 'features' in QTextDocument::toMarkdown()
src/gui/painting/qcolorspace.cpp:659:Undocumented parameter 'colorSpace1' in QColorSpace::operator!=()
src/gui/painting/qcolorspace.cpp:659:Undocumented parameter 'colorSpace2' in QColorSpace::operator!=()
src/gui/painting/qcolorspace.cpp:659:No such parameter 'colorspace1' in QColorSpace::operator!=()
src/gui/painting/qcolorspace.cpp:659:No such parameter 'colorspace2' in QColorSpace::operator!=()
examples/widgets/doc/src/icons.qdoc:269:Command '\snippet (//! [43])' failed at end of file 'widgets/icons/iconpreviewarea.cpp'
src/widgets/styles/qstyle.cpp:2026:Undocumented enum item 'SP_DialogRetryButton' in QStyle::StandardPixmap
src/widgets/styles/qstyle.cpp:2026:Undocumented enum item 'SP_DialogYesToAllButton' in QStyle::StandardPixmap
src/widgets/styles/qstyle.cpp:2026:Undocumented enum item 'SP_DialogIgnoreButton' in QStyle::StandardPixmap
src/widgets/styles/qstyle.cpp:2026:Undocumented enum item 'SP_DialogNoToAllButton' in QStyle::StandardPixmap
src/widgets/styles/qstyle.cpp:2026:Undocumented enum item 'SP_DialogAbortButton' in QStyle::StandardPixmap
src/widgets/styles/qstyle.cpp:2026:Undocumented enum item 'SP_RestoreDefaultsButton' in QStyle::StandardPixmap
src/widgets/styles/qstyle.cpp:2026:Undocumented enum item 'SP_DialogSaveAllButton' in QStyle::StandardPixmap
src/testlib/qtestcase.qdoc:439:Undocumented parameter 'TestClass' in QTest::QTEST_HIGHDPI_SCALING_MAIN
src/testlib/qtestcase.qdoc:452:Undocumented parameter 'TestClass' in QTest::QTEST_NO_HIGHDPI_SCALING_MAIN
Change-Id: Ib0e9bf81c5caaa6b1fc644ac92085af47c600e0e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
There's no reason to use them here, the Mutable is misleading in a
few instances, ranged-for is much simpler, and more future-proof.
Change-Id: Ifd5eaae95bbaa0b4cf0f435e6cfee6d778817b44
Reviewed-by: David Faure <david.faure@kdab.com>
They are going to be deprecated soon.
Use a lambda to mimic the adjacent addActions() calls.
Also, I didn't want to add a scope or extend the lifetime
of the return value of actions() until the end of the
function, and
for (QAction *action : actGroup.action())
would detach. I'd've made it a helper function, but it's
used only once, so... a lambda.
Change-Id: I2b3aae463036fd61a9cca7b4ef991b8752869bf3
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Without this some readers will fail to display the image or position
the image at the start of a paragraph rather than inline.
Change-Id: I2b9257e3193e5e68eb20112017a0c23be1d06cb0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If an embedded image is already encodeded as an png or jpg write the
data as is instead of decoding to a QImage and re-encoding as a new
image.
Change-Id: I479ae1fddbf59900a500497dd1bdf7449c21f273
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
[ChangeLog][QtCore][QSharedPointer] The swap overload for
QSharedPointer in the std namespace has been removed; a new
overload has been added in the Qt namespace.
[ChangeLog][QtCore][QWeakPointer] A swap overload has been
added.
Change-Id: I20d8dd90e896dd9d4b3461dc5d2f5bb2251654da
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix some ui glitches for QAbstractSpinBox:
- update geometry when buttons are toggled on/off
- calc button size with subControlRect instead hardcoded 20px
- when buttons are not shown, don't add the button size in
sizeFromContents for common and macOS style
Fixes: QTBUG-39713
Fixes: QTBUG-75303
Task-number: QTBUG-67126
Change-Id: Ibf330c76deb16358a481bba6bd429fff6a5d57ae
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QScopedPointer uses normal delete, but we need delete[].
Change-Id: Id62a2c55f75ef4aa60580f5e04c4bf306a6dd3c9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The CMake configure_file command is commonly used copy & modify template files
during the build process. One limitation, thought, is that configure_file
expect the variables to be replaced to be encoded using either a @APPNAME@ or
${APPNAME} convention.
This commit therefore changes "APPNAME" to "@APPNAME@" in wasm_shell.html to
make the HTML template file compatible with CMake configure_file.
With this commit, it becomes possible to write the following CMake function
that mimics what QMake is already doing:
function(copy_html_js_launch_files target)
set(APPNAME ${target})
configure_file("${_qt5Core_install_prefix}/plugins/platforms/wasm_shell.html"
"${target}.html")
configure_file("${_qt5Core_install_prefix}/plugins/platforms/qtloader.js"
qtloader.js COPYONLY)
endfunction()
Change-Id: Ic38abdc498ba03b8d21f1b9b70aa1d480ae7f362
Reference: https://cmake.org/cmake/help/latest/command/configure_file.html
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Such files do not exist (as per QFileInfo::exists), but on some
platforms that rely on realpath(), QFileInfo::canonicalFilePath did
not return the empty string.
Use the same logic on macOS as we already did on Android, and include
a test case. Remove the unnecessary dynamic memory allocation and
use a stack-allocated array instead, unless we use modern POSIX in
which case realpath() will alloc the memory for the result for us.
Change-Id: Ide987c68ebf00cbb7b1a66c2e9245a12c7807128
Fixes: QTBUG-44242
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
MinGW doesn't have a debug and a release version of the CRT like
Visual C++ does. Disabling the check would allow distribution
only of a Release build of Qt.
Change-Id: Iecfa753217af96ca74091cd1d47400632629abdb
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Due to PasteboardCopyItemFlavorData converting newlines to '\r' for some
UTIs we have traditionally had to shortcut these UTIs via NSStringPboardType
instead of the mime converters such as QMacPasteboardMimeUnicodeText.
Let's explain this a bit better for future generations.
Note that public.utf8-plain-text doesn't seem to have this problem
anymore, but it's left in for now to not cause any regressions due
to behavior change.
Change-Id: I7dce80828865c6323ed308780b8ca07b7a3e7c17
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The logic seems to be to prefer public.utf16-plain-text over the UTI
reported by the mime converter's flavorFor, but this doesn't make sense
for two reasons:
1. If the converter reports a UTI from flavorFor, we should respect
that as the preferred UTI. QMacPasteboardMimeUnicodeText already
reports public.utf16-plain-text as expected.
2. We don't know if the converter supports the public.utf16-plain-text
UTI, which is the case for QMacPasteboardMimeTraditionalMacPlainText
for example. The result is that we fail to retrieve any data. The
reason we haven't been seeing this issue is that the code path above
using qt_mac_get_pasteboardString will in most cases succeed and
return early.
Change-Id: I0b7e0d09a97389a229e7a945f17fef74ad5c2fc0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The snippet currently uses hard coded values for looping which
is not good practice. This patch fixes this using rowCount and
columnCount.
Change-Id: Ie532649353f757843426a18e9a50b86a2278f7a5
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
It's not clear why this test fails - and only does so sometimes - but
fail it does, so we ned to skip it to let development keep going. As
it happens, the same platform over-optimizes various computations
using qfloat16; which can at least be used to test for this platform,
since it wrongly distinguishes two qfloat16 values that theory and all
other platfomrs agree should coincide.
Fixes: QTBUG-75812
Change-Id: Ie9463d7dc21bca679337b475d13417b9f42bbf9b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Fusion style's SH_ItemView_ShowDecorationSelected hint is hard-coded to 1,
but in QCommonStyle::drawPrimitive (which QFusionStyle inherits) it only
asked its own QFusionStyle::styleHint() before drawing the background that
happens to be under the tree row decoration (arrow thingy or +/- symbol).
And the style doing the rendering does not know about QStyleSheetStyle so
by the time we get to QCommonStyle::drawPrimitive() it's too late to check.
Therefore QTreeView needs to avoid calling it in this case.
Fixes: QTBUG-73251
Change-Id: I2d0ed4d3b2ee805a5602122273387982caa564f8
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The code that deals with text selection in the iOS QPA
plugin, listen for changes to text selection. And depending
on whether we have a selection or not, we show or hide
the selection handles together with the edit menu.
The problem is that the edit menu will also be told to
show from other places, even if there is no selection. And
for those cases, we should avoid closing it.
This patch will check, before we close the edit menu, if we're
tracking a selection. If not, we leave the edit menu alone.
Fixes: QTBUG-75099
Change-Id: I001d818fa2ad4a215cc3fa6aa4c7faf516e1ed59
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When there is no DBus session, there will be no Linux accessibility,
since it relies on the presence of DBus.
Fixes: QTBUG-50189
Fixes: QTBUG-51940
Change-Id: I7503011b39ba2a806ddc12e89d0f7bd72a628b64
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
FT_GlyphSlot_Oblique(), the Freetype function to synthesize a
slanted/italic font, only accepts glyphs with outline format. So
disable loading bitmap format glyphs when that function will be used.
Fixes: QTBUG-73586
Change-Id: I762a4bc34537e0725ead0fb063d50c997403143d
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Change c2c3452ba introduced a new API in Qt to let QPA inform
whether or not shortcuts should be shown in context menus. This
was set to false by default, since by observation, this seemed to
be the most common behavior across platforms. The problem
is that it left no way for the application to override it; The
attribute Qt::AA_DontShowShortcutsInContextMenus simply doesn't work
when shortcuts are always off. And for some application, showing
shortcuts is not just a matter of look-and-feel, but also important
information to be able to use the application the way intended.
This patch reverts the behavior back to how it was in Qt-5.9, where
shortcuts where shown by default (except on macOS where we still keep
them off). It's no so much because the "always off" logic is wrong, but
because there is no (easy) way/work-around for an app developer to switch
them back on (until Qt-5.13, where a new API is introduced to fix the
situation: b1a9a77). And this lack of API can be a show-stopper for some
when upgrading from e.g 5.9 LTS to 5.12 LTS.
This downside of this patch, OTOH, is that it can cause more
change that what is normally wanted in a patch release. But out of
two evils, this is the best option. Those that wan't to hide shortcuts
can set AA_DontShowShortcutsInContextMenus to true, which now will
work.
[ChangeLog][QtWidgets][QMenu] Shortcuts are again shown by default
in context menus, except on macOS. They can be forced off by
setting AA_DontShowShortcutsInContextMenus to true.
Fixes: QTBUG-69452
Change-Id: Ibcc371395944ac5b19b1d20889940da271bf73d5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Since change c808a6978b plugins.qmltypes and designer/* didn't
get copied anymore for a non-prefixed build. Fix this, and clean up surrounding
code.
Fixes: QTBUG-75682
Change-Id: Ic6de94a5b01dae08929a67cbaedde60d120a4807
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Including both qopenglextensions.h and qopenglcontext.h would cause
ambiguity for the compiler when using QOpenGLContext
Change-Id: If8e46741c86d7639f442b5ac05a4493da784eb2f
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Having Aqua-themed controls in AquaDark theme looks interesting but not
very native. Clear cached Cocoa controls on theme change notification.
Change-Id: I884bf4434211be670aecc317935eb00b3fb6013c
Fixes: QTBUG-73652
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's a recurring bug seen in user code and a warning will help
reduce it.
Warns only for the attributes that have such requirement in the docs,
but maybe we should be more strict and warn for any attribute.
Change-Id: I68148521953221ad0e8be1028181f52a7f22d2cc
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Atomic being supported and atomic being requested are two different things.
(the latter is only true when QT_QPA_EGLFS_KMS_ATOMIC is set)
Log accordingly since this can be very important to know when investigating
problems.
Change-Id: I6947d18e7c0eaef3fe160095cb046770f9c93efe
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
Add support for surrogate code points U+D800 through U+DFFF,
represent them with JSON escape sequences.
https://github.com/tc39/proposal-well-formed-stringify
Change-Id: I84fea53a8ef400beebefdba10ea82dc510fe7dda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][qmake] The CONFIG value c++latest was added to select the
latest C++ standard the currently used toolchain supports.
Task-number: QTBUG-75653
Change-Id: I22ddc9d293109d99e652b7ccb19d7226fca4716d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
scanLine is overflowing with big images. Similar change was made in
4f88475a96 to fix the same issue with
QImage::scanLine.
Fixes: QTBUG-75082
Change-Id: Ifedf28fa9a303c189dfcd12bd4ec11f438540c2e
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
AppKit will in some cases ask our view to display on secondary threads if
we call APIs that are only supposed to be called on the main thread, such
as -[NSOpenGLContext setView:] or -[NSOpenGLContext update].
Forwarding this display-request is bad, as QtGui expects all window system
events to come on the main thread, and we can easily deadlock client code
such as the Qt Quick threaded renderer.
Change-Id: I1daeabf1dca6ca8ba908d3998b444a2089681e3a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Postpone the screen change until the DPI changed event in case a move
between screens with different DPI is detected.
Task-number: QTBUG-65580
Change-Id: I356f144b243d7d1ce7feabf0434c3f534b903965
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
When introducing EnableNonClientDpiScaling() for QTBUG-53255, the window
frame calculation was not adapted. That is, window frames were calculated
from the style for the primary screen only, causing
- minimum size constraints not being calculated correctly for applications
on secondary screens when populating the MINMAXINFO structure.
- warnings about not being able to apply a geometry when moving fixed
size windows across screens.
The calculation of the frames for propagating size hints is also no longer
required after 3035400f36, which retrieves
them from the WM_NCCALCSIZE message; QWindowsWindow::fullFrameMargins() can
be used instead.
For newly created windows, use the newly added AdjustWindowRectExForDpi()
function to calculate the initial frame size.
Change QWindowsGeometryHint from a class to a collection of static functions
and add overloads to calculate the frame.
In checkForScreenChanged(), update the margins until WM_NCCALCSIZE is
received.
Task-number: QTBUG-67777
Task-number: QTBUG-65580
Task-number: QTBUG-53255
Change-Id: Iff2d382b2b316adec6c1a0622ae8015dba6de371
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Make these functions handle the case where a window spans multiple
screens, and high-DPI scaling is enabled, and the local position (in the
window) is not on the window primary screen (as returned by
QWindow::screen()).
This is done by detecting the case, and then calculating
the correct position using the native coordinate system.
[ChangeLog][QtGui] QWindow::mapToGlobal()/mapFromGlobal() now handle
windows spanning screens correctly.
Done-with: Friedemann Kleint<Friedemann.Kleint@qt.io>
Task-number: QTBUG-73231
Change-Id: I3c31b741344d9e85e4f5d9e60bae75acce2db741
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We have not really been able to determine what the
default DPI should be, so make it configurable with
API on qtloader.js:
qtLoader.setFontDpi(72);
Also lowers the default DPI to the standard value of
96 (down from Qt default 100).
Task-number: QTBUG-75510
Change-Id: Ica1164c8d80bb06519233adebf2c9e400c0991ce
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
These declarations are provided for qdoc, but clang says they are the same:
template <typename Functor>
QMetaObject::Connection callOnTimeout(const QObject *context, Functor slot, Qt::ConnectionType connectionType = Qt::AutoConnection);
template <typename PointerToMemberFunction>
QMetaObject::Connection callOnTimeout(const QObject *receiver, PointerToMemberFunction slot, Qt::ConnectionType connectionType = Qt::AutoConnection);
clang accepts this one, but is it ok for the documentation?
template <typename MemberFunction>
QMetaObject::Connection callOnTimeout(const QObject *receiver, MemberFunction *slot, Qt::ConnectionType connectionType = Qt::AutoConnection);
Change-Id: I9d63b1bccfa8d73dbc17ab70c4415eb7891fbbe2
Reviewed-by: Martin Smith <martin.smith@qt.io>
