qt_asciiToDouble accepts a length parameter, so we can just pass
that through. No need for explicitly null-terminating, which is
where the copy of the data would be made.
Change-Id: I4e7921541f03295a2fae6171b35157084ff3ed8c
Fixes: QTBUG-65748
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QByteArray] QByteArray::toInt(),
QByteArray::toDouble() and the other number conversion functions
now ignore leading and trailing whitespaces, as their QString
counterparts already did. For consistency reasons, the same
behavior was added to qEnvironmentVariableIntValue() also.
Task-number: QTBUG-66187
Change-Id: I8b5e478ea8577b811d969286ea9e269f539c1ea4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Using SSE 4.1 because of the need for PMINUB.
Change-Id: Ib48364abee9f464c96c6fffd152ebd3f8ea7fe94
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Need to do the same for startsWith() and endsWith(). indexOf() is a lot
harder.
[ChangeLog][QtCore][QByteArray] Added compare(), which takes
Qt::CaseSensitivity as one of the parameters. This function is more
efficient than using toLower() or toUpper() and then comparing.
Change-Id: Ib48364abee9f464c96c6fffd152e69bde4194df7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
[ChangeLog][QtCore][QByteArray] Added QByteArray::isUpper() and
QByteArray::isLower() to check if a byte array contains only uppercase
or only lowercase Latin1 letters.
Change-Id: I7ab3c775bc714138d4be259ac6fa2cfc70467ed4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The Embedded Android build (Boot to Qt Android injection) is defined by
having both Q_OS_ANDROID and Q_OS_ANDROID_EMBEDDED flags defined,
as well as having Qt config android-embedded.
This commit enables the possibility to build embedded Android builds.
(i.e. Qt build for Android baselayer only, without JNI)
Change-Id: I8406e959fdf1c8d9efebbbe53f1a391fa25f336a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
ultrix and reliant have not seen a release since 1995. dgux not since
2001. bsdi not since 2003. irix not since 2006. osf not since 2010.
dynix... unclear, but no later than 2002. symbian needs no mention.
All considered obsolete, all gone.
sco and unixware are effectively obsolete. Remove them until someone
expresses a real need.
Change-Id: Ia3d9d370016adce9213ae5ad0ef965ef8de2a3ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_qvariant.cpp(80): warning C4309: 'initializing': truncation of constant value
tst_qvariant.cpp(4635): warning C4309: 'initializing': truncation of constant value
tst_qbytearray.cpp(1438): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
tst_qbytearray.cpp(1440): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
http2srv.cpp(64): warning C4018: '<=': signed/unsigned mismatch
tst_qinputdialog.cpp(352): warning C4804: '<=': unsafe use of type 'bool' in operation
Change-Id: Id012d88b7b20c5c9f128f2ef53753cc1d479f358
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ISO 14443-3 is for nfc communication and uses 2 different checksums.
The existing one is from ISO 3309 and the other one is from ITU-V.41.
Both are needed to implement an own transport layer defined in ISO
14443-4 to allow nfc commands with a length above 250 byte independent
from the smartphone.
This change will avoid code duplication in QNearFieldTarget.
The private function qNfcChecksum is a copy of qChecksum.
Change-Id: I790ffec8e2ea46f88b2db6f48b64fdcb140e7b70
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The separator character is inserted in the resulting array
after every byte and is useful for MAC address output like
01:23:45🆎cd:ef, Hash fingerprints, or low level data
debug output.
[ChangeLog][QtCore][QByteArray] Added toHex() overload to
insert a separator character between the hex bytes.
Change-Id: Ibe436094badc02f3ade7751aa8b5d690599941d4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
According to https://msdn.microsoft.com/en-us/library/5dae5d43.aspx,
strncpy_s' second argument must not be 0:
> If strDest or strSource is NULL, *or numberOfElements is 0*, the
> invalid parameter handler is invoked.
Move the existing check for len > 0 up to protect the strncpy_s
call, too.
Change-Id: I70d339ea60d4b76f3038b2e4e4756f6590a9bd31
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The first is "exact", not "more": qCalculateBlockSize. It ensures that
there's no overflow in multiplying, adding the header size or when
converting back to an int.
The second is the replacement for qAllocMore: it calculates the block
size like the first, but increases the block size to accommodate future
appends. The number of elements that fit in the block is also returned.
Task-number: QTBUG-41230
Change-Id: I52dd43c12685407bb9a6ffff13f5da09f816e667
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Cleaning out the workarounds for the discontinued "Embedded Android"
platform of Boot2Qt.
Change-Id: I0ff9d770e82a43457fb7e5da0428f4597ead4038
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
I wrote a script to help find the files, but I reviewed the
contributions manually to be sure I wasn't claiming copyright for search
& replace, adding Q_DECL_NOTHROW or adding "We mean it" headers.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b506368fc8842
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: Ieffb429efdc14aa5932b3fcdef5a18e13a62d35f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use character literals where applicable.
Change-Id: I1a026c320079ee5ca6f70be835d5a541deee2dd1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The keyword no longer has a meaning for the new CI.
Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Use-case is fast insertion of copies of a character,
avoiding any temporary heap allocations
Change-Id: Ie5517d88429fbd4c58dbe5729de7c468d5d9a279
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Had to mark {,c,const}{begin,end}() inline, since they are, and mingw
complains about inconsistent dllimport attributes.
[ChangeLog][QtCore][QByteArray] Added rbegin(), crbegin(), rend(), crend(),
and reverse_iterator and const_reverse_iterator typedefs.
Task-number: QTBUG-25919
Change-Id: Id5aefb52635f029305135afcd99db0b036a7af82
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We have at least 5 different (but equal) implementations of a wrapper
in Qt, and some code uses explicit NSAutoreleasePools. Having a shared
implementation lets us clean up things a bit and makes it easier to
reason about which pools are actually needed.
Change-Id: I2fd8eefc3ae7308595ef9899b7820206268362a5
Reviewed-by: Tim Blechmann <tim@klingt.org>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
Include test data in qrc so it can be found on Android.
Change-Id: Iaca8422120f1ef842aafeb0cc209cb9fdd70f05f
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Those operations aren't very common with QByteArray but this is easy to
optimize.
Qt Qt Creator
const & && const & &&
toLower 34 10 0 1
toUpper 3 1 0 0
Change-Id: I2097955f4c889ea5a21903c35ddbc0ff27bf62c5
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Do a check first if we need to transform before doing the transform.
This means we won't detach when transforming data that is already
correct.
And instead of using QChar, use our own hand-rolled table. In a proper
LTO build, the QChar calls would be resolved to a lookup of the Unicode
data, but not many people do LTO builds, Therefore, this means a great
speed-up is achieved by simply avoiding the function call. The extra
gain in performance comes from the simpler translation table instead of
the more complex full-Unicode data.
Also as a consequence, this changes the handling of two characters in
Latin 1: 'ß' should be uppercased to "SS" but we won't do it, and 'ÿ'
can't be uppercased in Latin 1 ('Ÿ' is outside the range).
Benchmarking is included. Comparing the Qt 5.4 algorithm to the new code
is almost 20x faster. Other alternatives are included in the benchmark
and are all faster than the current code, though slower than the new
one. While all of them could compress the tables to be smaller or shared
between uppercasing and lowercasing, they would also expand to more code
(though probably less than the extra bytes required in the full
translation table). In the trade-off, I decided to go with simplicity
and most efficient code.
Change-Id: I002d98318d236de0d27ffbea39d662cbed359985
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
[ChangeLog][QtCore][QByteArray] Fixed a bug that would cause QByteArray
to stop converting toUpper or toLower at the first embedded null
character.
Change-Id: Ia369037206617813d86a8f1489589243c82aa51b
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Add conversion methods similar to those in QString to QByteArray. This
is often more useful than the QString version since std::string like
QByteArray are byte arrays.
[ChangeLog][QtCore][QByteArray] Added convenience methods to convert
directly to and from std::string.
Change-Id: I92c29d4bb1d9e06a667dd9cdd936970e2d272006
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The "data" pointer became technically dangling after line 1866 did
copy = data;
as copy was the last reference to the original data. That made the
pointer address available to be reused by the system malloc(), which
sometimes happened, causing the unit test to fail.
Discussed-on: http://lists.qt-project.org/pipermail/development/2014-April/016588.html
Change-Id: Ifa6a27bd53a6e60392b77a6609f2d47148695211
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
We can squeeze, but not by discarding elements. Make sure the size of
the object stays intact after changing the reserved capacity.
I've also added unit tests for other containers, just to be sure.
Task-number: QTBUG-37750
Change-Id: I5135b095943b7589423c51cebcb52af792468e61
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This patch adds the Objective-C NSData/CDataRef converters to
QByteArray
This will replace the current converters offered in QMacExtras
[ChangeLog][QtCore][Objective-C] Added NSData/CDataRef converters for
QByteArray
Change-Id: I7a0f14bee4271798db345f3c5efd26ac671a3ea4
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The "base64url" encoding is defined in RFC 4648, which is the newest
version of Base64. There are also a few situations where the ending
'=' is not desired.
Change-Id: I9bb9fa55817b57d125189e4e795d6fde97caea6d
Reviewed-by: Richard J. Moore <rich@kde.org>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: I54523eb854619917123d8816d3cd6c3a1f5b4c55
Reviewed-by: David Faure <david.faure@kdab.com>
As they are built-in, they are effectively registered at compile-time
already.
Change-Id: I7ae6ba16088eab5d19213fa7b07c2a7760988a86
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Going through QLocale and QString is not really needed.
This also makes the result of the conversion of negative numbers
in bases other than 10 independent of the architecture and
implements the documented behavior of treating them as
unsigned types.
Change-Id: Ibc231dc5241deb5cbadd9796484a8b5f79c29410
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
