This API will fully replace the const char *-based connectNotify()
and disconnectNotify() in Qt5; the old functions will be REMOVED
before Qt 5.0 final.
The new implementation fixes the long-standing issue of
connectNotify() not being called when using the (internal)
index-based QMetaObject::connect() (e.g., from QML).
As with the old API, there are still two "unintuitive" behaviors
concerning disconnectNotify():
- disconnectNotify() is not called when the signal is disconnected
using the QObject::disconnect(QMetaObject::Connection) overload.
- disconnectNotify() is not called when a receiver is destroyed
(i.e., when a connection is implicitly removed).
The old versions of connectNotify() and disconnectNotify() are kept
for now, and they are still called. They will be removed once known
existing reimplementations (e.g., QtNetwork, QtDBus) have been
ported to the new API.
Change-Id: I8b4f007f3c6d89199c1ba04a3e23c8ca314e0896
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Turns out that we've had some old unit tests commented out that did not
compile. QString does not have a std::string constructor nor overloads
to many other methods. And std::string does not cast to char* on its
own. So these tests need to be removed.
Change-Id: I22df66fc3ccc68bc2840f2d83747234418e480f5
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Remove all non-UTF-8 sequences from source code in Qt.
Change-Id: I46d9cb23ef2199894896f171d553b3144822f36c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Given a member function that's a signal, returns the corresponding
QMetaMethod. Inspired by the implementation of the template-based
QObject::connect().
The primary use case for this function is to have an effective and
exact (not subject to shadowing) way of checking whether a known
signal was connected to in reimplementations of
QObject::connectNotify(QMetaMethod), avoiding string comparisons.
Example:
void MyObject::connectNotify(const QMetaMethod &signal)
{
if (signal == QMetaMethod::fromSignal(&MyObject::mySignal)) {
// Someone connected to mySignal ...
}
}
Change-Id: I5e4de434275fe543c004d569dcaa9ceda3442f03
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Known failures in this test are now handled by QEXPECT_FAIL.
Task-number: QTBUG-24796
Change-Id: I12ba57370cf3df1a85a108fbbcdc9db2222491c1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Unlike path(), toLocalFile() isn't reporting a URL component, so it
should decode the percent-encoded characters fully. This extra
decoding pass is meant to catch %00 to %1F, %7F and %25 (the percent
sign itself).
It also catches %80 to %FF, which aren't decoded because they don't
form UTF-8 sequences. That means QUrl::toLocalFile() has undefined
behaviour if the path contained non-UTF8 sequences.
Task-number: QTBUG-25459
Change-Id: Iab5a0ba6afcfc4510e297984f2ffc208cedd752b
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
QMetaObjectExtraData was added when support for QMetaObject::newInstance
was added. One needed a place to put the pointer to static_metacall in
the QMetaObject.
But as we break binary compatibility, one can change the size of
QMetaObject, and put everything back inside QMetaObject's own structure.
Meaning it is not required anymore to have one QMetaObjectExtraData
instance per QMetaObject anymore.
Change-Id: If0b8f586cbaf633eed10045adee3ba3366826c86
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
This is done in preparation of introducing the
QObject::connectNotify(QMetaMethod) function. Together with the
forthcoming QMetaMethod::fromSignal() function, which returns the
QMetaMethod corresponding to a Qt/C++ signal (member function), the
comparison operators provide an effective way of checking which
signal was connected to.
Change-Id: I2de48628c4884a7174fb8574895f272cb3fe5634
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Instead of trying to return whether the URL is relative to something
undefined, let's instead follow what the documentation was saying all
along and what the RFC says about "Relative References".
Change-Id: I32722321a6b36c6e3480669ad769390e4c6f7d1c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Previously, the CI system has not been testing on Windows with the
-developer-build configure flag. Mark known failures for this
configuration so that tests can be run in enforcing mode.
Change-Id: I5fbbbe09a7b400d626107c66dcbd5c5469a45b20
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
QLatin1Literal is just a typedef of QLatin1String.
Change-Id: If20ca225e57a7fb45a7775f0fc81aedb6da88c96
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QUrl::path() already decodes almost everything, but let's pass the
formatting flag to be sure.
Note: decoding of control characters from U+0001 to U+001F is not
implemented. Non-UTF8 sequences are also not representable.
Change-Id: I9a0ae2282ec3d48cc0e70e5b2d3824fb120709ed
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
It's perfectly valid to have a path of /c:/a.txt on Unix, so don't
strip the leading slash unless we're on Windows.
Task-number: QTBUG-20322
Change-Id: I721bd0a65b41048bc735d4eaa0d536174164fe64
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Since this test began to run again on Mac, it has been passing
consistently.
Task-number: QTBUG-22748
Change-Id: Ia81cf60b11d45fb331b5eca5d13df00556c18e07
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Add qSetMessagePattern() to configure the default
message pattern. This one can still be overwritten by setting the
QT_MESSAGE_PATTERN environment variable.
Without this method, there's actually no way to change the
default output programatically. Since QT_MESSAGE_PATTERN is
evaluated when the first message arrives, setting it via e.g. qputenv
might have no effect/be too late.
Change-Id: I115e0c30606f128fdbf5c169a951ffa2a6a48517
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Up until now, the macros would return an internal type that contained
the pointer to the data. This breaks code that tried to use the macros
with operators, like QStringBuilder but also when writing:
QStringList() << QStringLiteral("a") << QStringLiteral("b");
This change seems to work fine now and I can also verify that this
works:
const auto str = QStringLiteral("Hello");
Even though it creates a QString, which is non-POD and non-constexpr.
Change-Id: Iaf82af9bea4245513a1128ea54f9d2d3d785fb09
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
These tests were disabled when trying to get CI working on Mac OS
because they asserted or crashed. Now that CI is working well on Mac
OS, start running these tests again, initially as insignificant tests.
CI results will then be used to determine whether the tests can be made
significant.
Change-Id: Ife411e6b8c84ade45c865ef35f3ae0071d6f8d2b
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These warnings are expected and correct, so ignore them.
Change-Id: I43931950e46bd3c931db869902574ee7219efa1d
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Adjust the test because we don't read past the end anymore.
Task-number: QTBUG-25108
Change-Id: I8243f1d5ae79d1256aab2cb1132598a716a7eeeb
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Introduce a new QtMessageHandler that takes QString instead of
char *: This avoids converting to local8bit , only to convert it back
to utf16 for Windows.
The old QMessageHandler is kept for a transition period, but will
be removed before Qt 5.0.
Also fix qEmergencyOut (that is called in OOM situations) to not rely
on the default message handler.
Change-Id: Iee0ce5838f97175c98788b847964273dd22d4a37
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The constructor is wrong, it creates instance of QVariant encapsulating
a QColor instance. QVariant should not implicitly convert data, never.
Change-Id: Idc794ecdecb42d8b53fee3f993bf51ddd43f595d
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This test hangs ~2.6% of the time in CI.
The previous commit which attempted to mark this test as insignificant
did not work due to this .pro file doing a load(testcase) prior to the
line which set CONFIG += insignificant_test. testcase.prf must be
loaded _after_ insignificant_test is set.
Task-number: QTBUG-25342
Change-Id: I20470337fda8235e2fd0b6e8d5f564c8c57d167e
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
That change also fix moduleForType() which was wrongly recognizing
negative ids as belonging to Core.
New tests were added.
Change-Id: I40a5819effb32489a45937011980457387c9f8be
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
results are now equals to results of ICU's u_isprint() for the entire set
of the Unicode code points
Change-Id: I763f4b37cccd285eb01543d486f25bd7ea011241
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Archived build logs on http://testresults.qt-project.org/ci/ show that
the QPluginLoader test has failed in CI only once in the last 1000
builds (in build 1786), and on that occasion the test was legitimately
blocking a regression.
The QFactoryLoader test was derived from the QPluginLoader test and has
not failed since its first run on March 29, 2012.
Task-number: QTBUG-22765
Change-Id: I866b4b8e30e393e0c7e7292119c072b27008ab43
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This test is like qguieventdispatcher, it duplicates a corelib test in
the gui test suite, since the QtGui library often gets a different event
dispatcher implementation from the platform plugin.
Change-Id: Ifd724066950bc3b98a804bc2e5d40ce7b0429af4
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QTimeLine appears to have very poor timing characteristics. Historical
CI logs show roughly one failure in every twenty-five test runs on
Windows, and less frequent failures on Mac and Linux.
The root of the problem seems to be that QTimeLine's currentTime
counter appears to run at a variable speed and the only guarantee is
that it is slower than wall time. The frameChanged() test
function waited for double the expected duration of the timeline and
still found that the timeline had failed to finish in about one in every
thirty test runs. The interpolation() test function also failed for the
same reason, though less often.
This commit makes the frameChanged test more strict so that the poor
timing will be demonstrated more often, waiting only 1.5 times the
duration instead of double the duration. It also makes the test fail
gracefully so that this known issue won't disrupt CI when the test is
made significant in a later commit.
Task-number: QTBUG-24796
Change-Id: If469d43abb662e24445a9da619052eea9cf7c581
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QTimeLine::currentTime() is an integer in the range [0..duration], not a
float in the range [0.0..1.0]. The aim of the test appears to be to
verify that currentTime() is at least 90% of the way to duration() when
the timeline is almost due to finish, so verify that and give the
corresponding 10% tolerance on reaching the end state.
Change-Id: I38646947c3b9189a4e8e91a450c6071430ddc66a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test hangs ~2.6% of the time in CI.
Task-number: QTBUG-25342
Change-Id: I2c3531140e15edfe2dc2524e101b84e3206a4e61
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Otherwise, the order of updating of the indexes will cause
inconsistent results because it will rely on ordering within a
QHash (which is indeterminate).
Task-number: QTBUG-25325
Change-Id: I7d99578c8ee2954b8562dc5aff7dc32e74d41fb5
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This test has not failed in the last 500 Continuous Integration runs.
Task-number: QTBUG-22769
Change-Id: Ib2e95bb2291757941baa0ea46d568816eef20b09
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The testChildrenLayoutsChanged fails randomly. This happens rarely,
f.i. wasn't spotted by CI when QHash randomization itself was merged;
but is indeed reproducible by running the test a few times in a row.
This is now blocking api_merges integration, and I have no idea
how to fix it.
This patch marks the test as insignificant for now (the bug
tracking this test failure is QTBUG-25325), and switches the failing
tests from QVERIFY(a == b) to a proper QCOMPARE (so that the
expected values do show up in the build logs).
Change-Id: I16f0e28bcbb06dbac2e7169f4676a19ccf626a92
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
http://unicode.org/versions/corrigendum6.html:
> in Unicode 5.0, the list of characters with the Bidi_Mirrored property
> was made consistent for brackets and quotation marks, in preparation for
> new constraints on bidi mirroring. However, after publication of
> Unicode 5.0.0 it was discovered that this change adversely affected
> several quotation mark characters in deployed data.
Task-number: QTBUG-25169
Change-Id: Id49caf401af2d5a1e6dbcc32b2f350aa20b7f901
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The key returned by QHash::key is an arbitrary one that maps to the
given value. The test instead relied on it being a specific one.
Change-Id: I090351797e8b52036d78160fd810518a11e8107d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The hash autotest is wrong: it assumed that the iterator on the hash
would reach the end after iterating on two elements with identical key.
But three elements were added to that hash, and the third one
can appear after the other two.
That code path is left for the map test only.
Change-Id: I51de7987e2b132b6caff7bb4bac6a57fb7fcb530
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That was a regression introduced in 1c5db1aff
Example:
signals: int *someSignal();
would produce this code:
int* _t0 = int*();
which does not compile
So have special handling for pointer to change it to '= 0'
Change-Id: Ie695e15e309d15c3cfd5c5a69ac8bf6d61ae9915
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This test hangs 2-3% of the time.
Task-number: QTBUG-25284
Change-Id: I32e01696262be2de7e015b8f811d1666551426cc
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
The new QUrl is able to distinguish a URL component that is empty from
one that is absent. The previous one already had that capability for
the port, fragment and query, and the new one extends that to the username,
password and path. The path did not need this handling because its
delimiter from the authority it part of the path.
For example, a URL with no username is one where it's set to QString()
(null). A URL like "http://:kde@kde.org" is understood as an
empty-but-present username, for which toString(RemovePassword) will
return "http://@kde.org", keeping the empty-but-present username.
Change-Id: I2d97a7656f3f1099e3cf400b199e68e4c480d924
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This test no longer fails, so we can remove CONFIG+=insignificant_test
Task-number: QTBUG-22767
Change-Id: If3ca194fc982ad8fdc3e9a7f62fc346190ff01ea
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test no longer fails, so we can remove CONFIG+=insignificant_test
Task-number: QTBUG-22766
Change-Id: I379873d5c483157e414201e5f8a13c3f4407f9fd
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This does not fail anymore, remove CONFIG+=insignificant_test
Change-Id: I4f98cfad563adfa460910976317c91e852db6872
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Most of the tests were removed while QUrl::toEncoded or fromEncoded
were deprecated in the development process. Since they aren't
deprecated in the end, bring them back.
Change-Id: Ibdb6cd3c4b83869150724a8e327a03a2cd22580d
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
By having the default value equal to zero, we follow the principle of
least surprise. For example, if we had
url.path()
and we refactored to
url.path(QUrl::DecodeSpaces)
Then instead of ensuring spaces are decoded, we make spaces the only
thing encoded (unicode, delimiters and reserved characters are
encoded).
Besides, modifying the default can only be used to encode something
that wasn't encoded previously, so having the enums as Encode makes
more sense.
As a side-effect, toEncoded() does not support any extra encoding
options.
Change-Id: I2624ec446e65c2d979e9ca2f81bd3db22b00bb13
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This allows things like http://example.com/{1234-5678}?id={abcd-ef01}.
But do not allow it in other parts of the URL. I could allow it in the
fragment, but in the username and password it would be too ugly.
In order to do that, make DecodeReserved use two bits and have
PrettyDecoded set only one of them. That way, toString(PrettyDecoded)
can be distinguished from toString(PrettyDecoded | DecodeReserved),
just as path(PrettyDecoded) can be distinguished from
path(PrettyDecoded & ~DecodeDelimiters).
Also, take the opportunity to avoid decoding the reserved characters
in the query. Keep them encoded as they should be.
Change-Id: I1604a0c8015c6b03dc2fbf49ea9d1dbed96fc186
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
DecodeReserved applies to all characters between 0x21 and 0x7E that
aren't unreserved, a delimiter, or the percent sign itself.
Change-Id: Ie64bddb6b814dfa3bb8380e3aa24de1bb3645a65
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
There's little value in having the DecodeUnambiguousDelimiters option
since neither QUrl nor QUrlQuery can return values that are ambiguous
in that particular context, ever.
This option could be used to encode a character if, when placed
in a URL, it would need to be encoded. Such cases are hash (#) or
question marks (?) in the path component, or slashes (/) and at signs
(@) in the userinfo.
However, we don't need two enums for that, since there are no
other characters that can appear in either form. Still, leave two bits
for this enum. In the future, if we want to split the gen-delims from
the sub-delims, we are able to.
Change-Id: If5416b524680eb67dd4abbe7d072ca0ef7218506
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This tests how QUrl encodes and decodes certain characters and leaves
some other ones alone. It also tests that the output of toString() (in
whichever encoding was being tested) is also parsed again to be
exactly the same as the previously decoded form.
Change-Id: Ie358d001f8b903409db61db48bde1ea679241a60
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This is the same fix as the previous commit did for the other
components of the URL. But we're also changing how we handle the "[]"
characters in a query: previously the handling was like for other
sub-delims; now, they're always decoded, assuming that the RFC had a
mistake and they were meant to be decoded.
Change-Id: If4b1c3df8f341cb114f2cc4860de22f8bf0be743
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Refactor the way that QUrl stores and returns the components of the
URL so that ambiguous delimiters (gen-delims that could change the
meaning of the parsing) are interpreted correctly. Previously, QUrl
called "unambiguous" the form found in a full URL, even though each
item in isolation could have more characters decoded.
Now, instead, store only the fully decoded form. To recreate the
compound forms (the full URL, as well as the user info and the
authority), we need to do more processing.
This commit applies to the user name, password, path and fragment
only. The scheme, host and port do not need this work because they are
special; the query is handled separately.
Change-Id: I5907ba9b8fe048fff23c128be95668c22820663a
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
0xfdef-0xfdd0 is definitely 31 and not 15 :)
also fix all copy-pastes of this code (greping for '0xfdd0' helps ;)
Change-Id: I8f3bd4fd9d85f9de066f0f5df378b9188c12bd48
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Just like qMalloc/qRealloc/qFree, there is absolutely no reason to wrap these
functions just to avoid an include, except to pay for it with worse runtime
performance.
On OS X, on byte sizes from 50 up to 1000, calling memset directly is 28-15%
faster(!) than adding an additional call to qMemSet. The advantage on sizes
above that is unmeasurable.
For qMemCopy, the benefits are a little more modest: 16-7%.
Change-Id: I98aa92bb765aea0448e3f20af42a039b369af0b3
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: John Brooks <john.brooks@dereferenced.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Some FTP implementations (currently not including QNAM) strip the first
slash off the path in an FTP URL so that the path in the URL is relative
to the login path (the user's home directory). To reach the root
directory, another slash is necessary, hence the double slash.
In anticipation of future URL normalisation, which Qt 4 could do, "//"
could be rendered to "/", so this extra slash should be "%2F".
This operation is done only in QUrl::fromUserInput.
Change-Id: If9619ef6b546a3f4026cb26b74a7a5a865123609
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
QT_NO_STL is now no longer defined, so remove the conditionals and
select the STL side.
Change-Id: Ieedd248ae16e5a128b4ac287f850b3ebc8fb6181
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Two equal QByteArrays must return the same hash.
Change-Id: Iddd45b0c420213ca2b82bbcb164367acb6104ec8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Two equal strings / stringrefs must return the same hash.
Change-Id: I2af9a11ab721ca25f4039048a7e5f260e6ff0148
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It was confusing DataLocation and GenericDataLocation, and the same
for CacheLocation and GenericCacheLocation. The test was passing in
the api_changes branch because these were giving the same result
(empty app name), but the QCoreApplication::applicationName fix in master
makes these different, so the bug in the test showed up after merging.
Change-Id: I80ef6883c96cfd02b8c277d9d686717028d396bb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This uses an alternative approach to the testing formerly introduced
in 4ef5a626. Zero-termination tests are injected into all QCOMPARE/QTEST
invocations. This makes such testing more thorough and widespread, and
gets seamlessly extended by future tests.
It also fixes an issue uncovered by the test where using a past-the-end
position with QString::insert(pos, char), could move uninitialized data
and clobber the null-terminator.
Change-Id: I7392580245b419ee65c3ae6f261b6e851d66dd4f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
The approach used to verify for zero-termination is too intrusive and
requires additional maintenance work to ensure new zero-termination
tests are added with new functionality.
Zero-termination testing will be re-established in a subsequent commit.
This reverts commit 4ef5a6269c.
Change-Id: I862434a072f447f7f0c4bbf8f757ba216212db3c
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
This enables easier updating of those structs, by reducing the amount of
code that needs to be fixed. The common (and known) use cases are
covered by the two macros being introduced in each case.
Change-Id: I44981ca9b9b034f99238a11797b30bb85471cfb7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There were two constuctors offering essentially the same functionality.
One taking the QStatic*Data<N> struct, the other what essentially
amounts to a pointer wrapper of that struct. The former was dropped and
the latter untemplatized and kept, as that is the most generic and
widely applicable. The template parameter in the wrapper was not very
useful as it essentially duplicated information that already maintained
in the struct, and there were no consistency checks to ensure they were
in sync.
In this case, using a wrapper is preferred over the use of naked
pointers both as a way to make explicit the transfer of ownership as
well as to avoid unintended conversions. By using the reference count
(even if only by calling deref() in the destructor), QByteArray and
QString must own their Data pointers.
Const qualification was dropped from the member variable in these
wrappers as it causes some compilers to emit warnings on the lack of
constructors, and because it isn't needed there.
To otherwise reduce noise, QStatic*Data<N> gained a member function to
directly access the const_cast'ed naked pointer. This plays nicely with
the above constructor. Its use also allows us to do further changes in
the QStatic*Data structs with fewer changes in remaining code. The
function has an assert on isStatic(), to ensure it is not inadvertently
used with data that requires ref-count operations.
With this change, the need for the private constructor taking a naked
Q*Data pointer is obviated and that was dropped too.
In updating QStringBuilder's QConcatenable specializations I noticed
they were broken (using data, instead of data()), so a test was added to
avoid this happening again in the future.
An unnecessary ref-count increment in QByteArray::clear was also
dropped.
Change-Id: I9b92fbaae726ab9807837e83d0d19812bf7db5ab
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Algorithmic complexity attacks against hash tables have been known
since 2003 (cf. [1, 2]), and they have been left unpatched for years
until the 2011 attacks [3] against many libraries /
(reference) implementations of programming languages.
This patch adds a qHash overload taking two arguments: the value to
be hashed, and a uint to be used as a seed for the hash function
itself (support the global QHash seed was added in a previous patch).
The seed itself is not used just yet; instead, 0 is passed.
Compatibility with the one-argument qHash(T) implementation is kept
through a catch-all template.
[1] http://www.cs.rice.edu/~scrosby/hash/CrosbyWallach_UsenixSec2003.pdf
[2] http://perldoc.perl.org/perlsec.html#Algorithmic-Complexity-Attacks
[3] http://www.ocert.org/advisories/ocert-2011-003.html
Task-number: QTBUG-23529
Change-Id: I1d0a84899476d134db455418c8043a349a7e5317
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
It is an extension coming from the use case when you, for instance, need to
implement a countdown timer in client codes, and manually maintain a dedicated
variable for counting down with the help of yet another Timer. There might be
other use cases as well. The returned value is meant to be in milliseconds, as
the method documentation says, since it is reasonable, and consistent with the
rest (ie. the interval accessor).
The elapsed time is already being tracked inside the event dispatcher, thus the
effort is only exposing that for all platforms supported according to the
desired timer identifier, and propagating up to the QTimer public API. It is
done by using the QTimerInfoList class in the glib and unix dispatchers, and the
WinTimeInfo struct for the windows dispatcher.
It might be a good idea to to establish a QWinTimerInfo
(qtimerinfo_win{_p.h,cpp}) in the future for resembling the interface for
windows with the glib/unix management so that it would be consistent. That would
mean abstracting out a base class (~interface) for the timer info classes.
Something like that QAbstractTimerInfo.
Test: Build test only on (Arch)Linux, Windows and Mac. I have also run the unit
tests and they passed as well.
Change-Id: Ie37b3aff909313ebc92e511e27d029abb070f110
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
While QArrayDataPointer offers generic detach() functionality, this is
only useful for operations that may modify data, but don't otherwise
affect the container itself, such as non-const iteration, front() and
back().
For other modifying operations, users of the API typically need to
decide whether a detach is needed based on QArrayData's requirements
(is data mutable? is it currently shared?) and its own (do we have
spare capacity for growth?).
Now that data may be shared, static or otherwise immutable (e.g.,
fromRawData) it no longer suffices to check the ref-count for
isShared().
This commit adds needsDetach() which, from the point-of-view of
QArrayData(Pointer), answers the question: 'Can contained data and
associated metadata be changed?'.
This fixes QArrayDataPointer::setSharable for static data (e.g.,
Q_ARRAY_LITERAL), previously it only catered to shared_null.
SimpleVector is also fixed since it wasn't checking Mutability and it
needs to because it supports fromRawData().
Change-Id: I3c7f9c85c83dfd02333762852fa456208e96d5ad
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This enables a truncating resize() to be implemented. It is similar to
destroyAll(), but updates the size() as it goes, so it is safe to use
outside a container's destructor (and doesn't necessarily destroy all
elements).
The appendInitialize test was repurposed and now doubles as an
additional test for QArrayDataOps as well as exercising SimpleVector's
resize().
Change-Id: Iee94a685c9ea436c6af5b1b77486734a38c49ca1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This follows QArrayData::detachFlags's lead. Given the (known) size for
a detached container, the function helps determine capacity, ensuring
the capacityReserved flag is respected.
This further helps aggregating behaviour on detach in QArrayData itself.
SimpleVector was previously using qMax(capacity(), newSize), but there's
no reason to pin the previous capacity value if reserve() wasn't
requested. It now uses detachCapacity().
Change-Id: Ide2d99ea7ecd2cd98ae4c1aa397b4475d09c8485
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Adds given number of default-initialized elements at end of array. For
POD types, initialization is reduced to a single memset call. Other
types get default constructed in place.
As part of adding a test for the new functionality the arrayOps test was
extended to verify objects are being constructed and assigned as
desired.
Change-Id: I9fb2afe0d92667e76993313fcd370fe129d72b90
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Callers should just call the standard allocation functions directly.
Adding an extra function call onto all basic memory management for the sake of
making it instrumentable in rare cases isn't really fair to everyone else.
What's more, this wasn't completely reliable, as not everything was using them
in a number of places. Memory management can still be overridden using tricks
like LD_PRELOAD if needed.
Their aligned equivilents cannot be deprecated, as no standard equivilents
exist, although investigation into posix_memalign(3) is a possibility
for the future.
Change-Id: Ic5f74b14be33f8bc188fe7236c55e15c36a23fc7
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
For data allocated and maintained by QByteArray, there's a guarantee
that data() is null-terminated. This holds true even for null and empty,
where logically the terminating character should never be dereferenced.
For tests that modify or generate QByteArrays, this ensures the
invariant is kept.
In the toFromHex() text, const-ness of temporary variables was dropped
to enable the test macro to be used, as the qualification didn't add
much to the test otherwise.
Change-Id: I7ee52e79e3a9df7de18c743f3698dab688e6bf0e
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
There are probably lots of places that rely on that behaviour, so go
back to what it was.
Change-Id: I4d1503a0ee105a50cdfaab52d9a5862a02c70757
Reviewed-by: David Faure <faure@kde.org>
I don't know if the bug is in moc or in qmake. But it bails out trying
to parse the .cpp file after the
tst_QUrlInternal::nameprep_testsuite_data function. If the #include is
placed above, it works. If it's placed below, it doesn't.
Change-Id: Ide554aa5aa3f1999e29604ba6d25ccdb09f6ef28
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Don't crash when either side is null but not both sides.
Also make sure operator< is working properly and satisfies the basic
conditions of a type (such as that if A < B, then !(B < A)).
Change-Id: Idd9e9fc593e1a7781d9f4f2b13a1024b643926fd
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The strict mode check is now implemented after the tolerant parser has
finished, and only if the tolerant parser has not found any errors. We
catch the use of disallowed characters (control characters plus a few
not permitted anywhere) and broken percent encodings.
We do not catch the use of Unicode characters, as they are permitted
in IRIs.
In the tests, remove the old errorString test since it makes little
sense.
Change-Id: I8261a2ccad031ad68fc6377a206e59c9db89fb38
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Note that QUrl can only remember one error. If the URL contains more
than one error condition, only the latest (in whichever parsing order
URL decides to use) will be reported.
I don't want too keep too much data in QUrlPrivate for validation, so
let's use 4 bytes only.
Change-Id: I2afbf80734d3633f41f779984ab76b3a5ba293a2
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Also say hello to QUrl's constructor and QUrl::toString being allowed
again.
QUrl operates now on UTF-16 encoded data, where a Unicode character
matches its UTF-8 percent-encoded form (as per RFC 3987). The data may
exist in different levels of encoding, but it is always in encoded
form (a percent is always "%25"). For that reason, the previously
dangerous methods are no longer dangerous.
The QUrl parser is much more lenient now. Instead of blindly following
the grammar from RFC 3986, we try to use common-sense. Hopefully, this
will also mean the code is faster. It also operates on QStrings and,
for the common case, will not perform any memory allocations it
doesn't keep (i.e., it allocates only for the data that is stored in
QUrlPrivate).
The Null/Empty behaviour that fragments and queries had in Qt4 are now
extended to the scheme, username, password and host parts. This means
QUrl can remember the difference between "http://@example.com" and
"http://example.com".
Missing from this commit:
- more unit tests, for the new functionality
- the implementation of the StrictMode parser
- errorString() support
- normalisation
Change-Id: I6d340b19c1a11b98a48145152513ffec58fb3fe3
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Now that QUrlQuery exists, these methods are no longer necessary in
QUrl itself. Manipulation of the items should be done using the new
class.
They are now implemented using a temporary QUrlQuery. This is hardly
efficient but it works.
Change-Id: I34820b3101424593d0715841a2057ac3f74d74f0
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This class is meant to replace the QUrl functionality that handled
key-value pairs in the query part of an URL. We therefore split the
URL parsing code from the code dealing with the pairs: QUrl now only
needs to deal with one encoded string, without knowing what it is.
Since it doesn't know how to decode the query, QUrl also becomes
limited in what it can decode. Following the letter of the RFC,
queries will not encode "gen-delims" nor "sub-delims" nor the plus
sign (+), thus allowing the most common delimiters options to remain
unchanged.
QUrlQuery has some undefined behaviour when it comes to empty query
keys. It may drop them or keep them; it may merge them, etc.
Change-Id: Ia61096fe5060b486196ffb8532e7494eff58fec1
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Change it to operate on QChar pointers, which gains a little in
performance. This also avoids unnecessary detaching in the QString
source.
In addition, make the output be appended to an existing QString. This
will be useful later when we're reconstructing a URL from its
components.
Change-Id: I7e2f64028277637bd329af5f98001ace253a50c7
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The reason for this change is that the strict parser made little sense
to exist. What would the recoder do if it was passed an invalid
string?
I believe that the tolerant recoder is more efficient than the
correcting code followed by the strict recoder. This makes the recoder
more complex and probably a little less efficient, but it's better in
the common case (tolerant that doesn't need fixes) and in the worst
case (needs fixes).
Change-Id: I68a0c9fda6765de05914cbd6ba7d3cea560a7cd6
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This one function is an all-in-one:
- UTF-8 encoder
- UTF-8 decoder
- percent encoder
- percent decoder
The next step is add the ability to modify the behaviour, by telling
the function what else it must encode or decode and what it should
leave untouched.
Change-Id: I997eccfd2f9ad8487305670b18d6c806f4cf6717
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
These functions are now aliases to {to,from}Ace, which are usually
what you want. The original functions from Qt 4.0 had the wrong
semantics and wrong name. The new ones from Qt 4.2 execute the ACE
processing from IDNA (specifically, the ToASCII and ToUnicode
operations described in the RFC).
But so as not to be without tests, export the tests in unit testing
environment and test the punycode roundtrip. Note that the
tst_QUrl::idna_test_suite test tests *only* the Punycode roundtrip,
not the nameprepping.
Change-Id: I9b95b4bd07b4425344a5c6ef5cce7cfcb9846d3e
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Copy the unit tests that related to percent-encoding to
tst_qbytearray.cpp and use public functions to execute
QUrl::fromPercentEncoded and QUrl::toPercentEncoded.
Change-Id: I6639ea566d82dabeb91280177a854e89e18f6f8d
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
The clone() method didn't detach if we had enough memory
allocated, but didn't consider that the object being
modified is not the root object of the binary blob.
Change-Id: I9a479ae1c873b7fe9cff7e13c539e7a41961bf68
Reviewed-by: Cristiano di Flora <cristiano.di-flora@nokia.com>
Reviewed-by: abcd <amos.choy@nokia.com>
Reviewed-by: Jamey Hicks <jamey.hicks@nokia.com>
The change in plugin loading has meant that different plugins in the
same plugin folder will not be handled properly when loaded with
different instances of QFactoryLoader.
A solution is to only unload compatability plugins from
QFactoryLoader::update() since they are the only plugins that are
actually loaded in that method.
This auto test shows the error on the current version of QFactoryLoader
and passes with the fix described above.
Change-Id: I12001525d51bb631d6742c5965357598322f247c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Similarly, only test against the libc function on Linux, as other OS
sometimes have different behaviour.
Change-Id: I9b8ef9a3d660a59882396d695202865ca307e528
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
In the unit test, check against inet_aton on Linux with GLIBC
only. Other platforms have this function too, but they sometimes have
different behaviour, so don't try to test them equally.
Change-Id: I1a77e405ac7e713d4cf1cee03ea5ce17fb47feef
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
QStandardPaths now knows a "test mode" which changes writable locations
to point to test directories, in order to prevent auto tests from reading from
or writing to the current user's configuration.
This affects the locations into which test programs might write files:
GenericDataLocation, DataLocation, ConfigLocation,
GenericCacheLocation, CacheLocation.
Other locations are not affected.
Change-Id: I29606c2e74714360edd871a8c387a5c1ef7d1f54
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Test that they do expand properly and don't produce errors. This is
templated code, so it doesn't get tested fully unless we instantiate
them.
Also check that the alignments are correct.
Change-Id: I2a8ee2165167f54b652b4227411e209850974b8e
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This makes it more useful in all the Qt apps that don't set it,
given that it's used internally by QTemporaryFile, QTemporaryDir,
QStandardPaths, QDBus, QAccessibleApplication, etc.
Qt4 compatibility in the deprecated QDesktopServices is preserved,
no fallback there.
Change-Id: I584463507cf917a3720793c6bd45d07c60f8356c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There isn't really a need for the dependency as LanguageChange events can be
caught in QObject::eventFilter, directly.
Change-Id: I39778fbe1663924d97705b514ae399cfd3749776
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The code in question was already commented out before the test was added
to the Qt repository in 2006. After changing the code to use
QFile::rename() for portability, the test appears to pass.
Change-Id: I52a8578a47da419cabf5826b633cc4f2ac2c5218
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
THe UK still uses the Imperial system at least for distances
and many other things.
Change-Id: I99379de35620114328ad6a7fc9b226a46692bedd
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
The QFlags::operator int() isn't being called, so GCC complains that
this isn't an integer expression.
Change-Id: I537d06fd4a52ecbcddf0ef67807b298c42d3e911
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Lack of support for these types is not a real issue as endian
conversions on byte-sized types are no-ops. Still, the conversions are
useful as they facilitate writing of generic code. They can also be used
explicitly as a way to document in code an endian-specific binary
format:
uchar *data;
quint8 tag = qFromLittleEndian<quint8>(data++);
quint32 size = qFromLittleEndian<quint32>(data);
This commit also adds a test for functions documented in the QtEndian
header.
Change-Id: I2f6c876ce89d2adb8c03a1c8a25921d225bf6f92
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For all practical purposes, the fallback introduced here returns the
desired value. Having a fallback enables unconditional use of Q_ALIGNOF.
For compilers that provide native support for it, Q_ALIGNOF is otherwise
#defined in qcompilerdetection.h.
Change-Id: Ie148ca8936cbbf8b80fe87771a14797c39a9d30c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Internally we construct QByteArrays from QStaticByteArrays. For example
moc is generating QStaticByteArray structure for every string it saves.
New test cases check if a QByteArray constructed from a QStaticByteArray
behaves as a not statically constructed one.
Change-Id: Ia4aa9a1a5bc0209507636c683a782dda00eae85c
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Use QEXPECT_FAIL instead (QRegExp is bugged w.r.t. the specific
test data).
Task-number: QTBUG-22466
Change-Id: Id5af01fa0d5c0536845fd4db19d4264498a8675b
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This allows me to keep the UTF-8 invalid data in one safe place. I
won't need to copy & paste it.
Change-Id: Icb909d08b7f8d0e1ffbc28e01a0ba0c1fa9dccf0
Reviewed-by: David Faure <faure@kde.org>
QSharedPointer is about to be made final. Instead
of inheriting from it to gain access to the
d-pointer, cast it to a layout-compatible struct
and access the pointer from there.
Assert liberally to ensure layout compatibility.
Change-Id: Ifc0fa6a6608e861469286673844325663f4f7fcc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMap used to use a skiplist in Qt 4.x, which has variable
sized nodes and we can thus not optimise using custom
allocators.
The rewrite now uses a red-black tree, and all allocations
and tree operations happen in the cpp file. This will allow
us to introduce custom allocation schemes in later versions
of Qt.
Added some more tests and a benchmark. Memory consumption
of the new QMap implementation is pretty much the same as before.
Performance of insertion and lookup has increased by 10-30%. iteration
is slower, but still extremely fast and should not matter compared
to the work usually done when iterating.
Change-Id: I8796c0e4b207d01111e2ead7ae55afb464dd88f5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The parser makes the default language en_US, and no mimetype xml says
<comment xml:lang="C">, so use the en_US string for the C locale,
rather than returning an empty string.
Change-Id: Iad7c142e8078abe357773249416e7ce9b3e29a92
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ApplicationsLocation and DataLocation were returning only the local path,
rather than system paths + local path.
Change-Id: I653d14e5bbe1e08c5fa1ecd5a6106336d1cd0369
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We are running out of type ids for built-in types, 255 is not enough.
QMetaType already contains about ~70 types, situation is maybe not
tragic now, but there is a great chance that we will want to add more
built-in types from different modules like jsondb or declarative. Then
it might be tight, because we are not allowed to reorganize type ids
(it would be a binary incompatible change).
This change was not possible up to now. Old moc generated code assumes
that type id can be safely stored in 8 bits.
This is source compatible change.
Change-Id: Iec600adf6b6196a9f3f06ca6d865911084390cc2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
- Fixed path was failing to find sub program.
Change-Id: I86f1a6941e244c9bc25ad0441cc7a441607560b7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
For Qt5 we no longer want to support the older revisions due to the
dual codepaths that must be maintained, and because the format of the
meta-object data is quite different in revision 7.
The dual codepaths have been replaced by asserts that indicate the
revision in which the feature was introduced, and the older-revision
fallbacks have been removed.
It's not possible to build code generated by moc that has
revision <= 6 with Qt5 because the type of the
QMetaObject::stringdata member changed from const char * to const
QByteArrayData *. For the same reason it's not possible to build a
dynamic meta-object generator targeting revision <= 6 with Qt5.
Hence, too old meta-objects will be caught at compile time, and the
code will have to be ported to generate revision 7 (e.g., by running
Qt5's moc on the original class declaration).
Change-Id: I33f05878a2d3ee3de53fc7009f7a367f55c25e36
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QMetaMethod::typeName() is documented to return an empty string if
the return type is void. But after the introduction of
QMetaType::UnknownType (where void was made a distinct type),
returning an empty string causes the idiom
QMetaType::type(method.typeName())
to break; the result will be QMetaType::UnknownType rather than
the expected QMetaType::Void for methods that return void.
New code should use the new function QMetaMethod::returnType()
instead, but it would be good if existing code still did the right
thing.
The consequence of returning "void" instead of an empty string is
that it breaks existing logic that uses the typeName() length to
determine whether a method returns void. But we judge this as the
lesser of the two evils; it's better to have a typeName() function
that is consistent and keeps the QMetaType::type(method.typeName())
idiom working, than to force the typeName() inconsistency for void
only to keep code that does "strlen(method.typeName()) == 0"
working.
The places in Qt that were relying on a zero-length typeName()
(testlib, dbus, declarative) have already been changed to use
returnType().
Also adapt QMetaObjectBuilder, which is internal API.
Change-Id: I70249174029811c5b5d2a08c24b6db33b3723d19
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Since the introduction of QMetaType::UnknownType, void is a proper
meta-type, and the normalized form of "void" should be "void", not
an empty string.
Add more tests to ensure that we do remove "void" in the one case
where it actually should be removed (e.g. "foo(void)").
Change-Id: I72dc2d24da67cf52da00c678f50213cff1b92e25
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This causes all sorts of problems, but is also blocking the introduction of new,
more detailed signals, because the backend never correctly identified the removal.
The object handle appears to be woken up before the directory is actually
deleted, thus causing QFileInfo::exists() to return true, and not doing the
removal dance. This behaviour isn't exactly documented (as far as I was able to
find out), but also seems to happen consistently, and Chromium also contains
a comment noting a similar issue.
Task-number: QTBUG-2331
Change-Id: Icfb6219b78e688852d7863a666a0ffc31bb4d573
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This actually involved tiding up QObject sources a little bit
to clearly separate QString / QRegExp overloads of findChildren.
The corresponding qFindChildren overload for MSVC 6 compatibiltiy
was *not* added.
Change-Id: I84826b3df9275a9bda03608a5b66756890eda6f8
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QVariant handlers can not be unregistered. We are not able to guarantee
that such operation is safe and we do not want to.
Change-Id: Id9a12e6a8c750110e4a08eab1de3e07e5c408675
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch changes invalid QVariant qDebug stream value from
"QVariant(, QVariant::Invalid)" to "QVariant(Invalid)"
New tests were added.
Change-Id: Ia57d4fc2d775cc9fce28e03eba402c2173845b35
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Make QJsonValue, QJsonObject, QJsonArray and QJsonDocument
first-class meta-types.
This is an enabler for a lightweight integration with QML.
Change-Id: I4725efdd2746cf97fd26d3632a99e8eee849f834
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
These were not covered at all by tst_qmetatype.
Change-Id: Ic957470ac78b2c15fe449efe17e1f178a41c3690
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
C++11 adds cbegin()/cend() functions for the same reason Qt has
constBegin()/constEnd(). This patch adds these functions to the
Qt containers with the same implementation as constBegin()/constEnd().
It also fixes the return types in the documentation of existing
constFind() functions (documentation only).
C++11 only adds cbegin()/cend() (and crbegin()/crend(), which Qt doesn't have).
In particular, it doesn't add cfind(), so I didn't supply these, even though
Qt comes with constFind().
This is a forward-port of https://qt.gitorious.org/qt/qt/merge_requests/1365.
Change-Id: Ida086b64246b24e25254eafbcb06c8e33388502b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Commit 3fe1eed0 changed the QVERIFY in line 1354 to QCOMPARE. This was
done to work around a (not yet understood) compiler issue. That however
was wrong, as char pointers in QCOMPARE are assumed to point to
'\0'-terminated strings and will get dereferenced.
In this case the intent was to compare the actual pointer values, as the
pointers point past the end of the array and should not be dereferenced.
Explicitly casting to (void *) and using QCOMPARE will not only keep the
intent, it will hopefully also provide meaningful output on failures. As
such the fix was applied throughout the test.
Change-Id: Ib0968df492ccc11d7c391bb69037cd7241e55493
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
The tst_QSharedPointer generate another Process to test some invalid
codes, and it expect that the prcoess will crash and return a non-zero
value.
The process which is a console application was linked to windows
subsystem, and QProcess seems can not get its return value. This
cause the unit test fail.
In addition, when the process crash under debug mode, a debug error
report-dialog will appear, which is very annoying, so I suppress it too.
Task-number: QTBUG-24160
Change-Id: Ia1c872d4515c83b0aa516bcfe3783f59797d2d49
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
