The doc said positive values for a negative range were intermediate
but the code actually rejects them if the value has an overt plus
sign, so make clear that intermediate is only for the case without a
sign. Incidentally comment on a test where it might not have been
obvious to the reader that a space is the locale's digit-grouping
chracter.
Pick-to: 6.5 6.5.0
Change-Id: I3edab74fe8c2cbe8448c0e523676f1fd0d0d8a9f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
From the manual page:
Note: modern applications may prefer to use the interfaces
described in utimensat(2).
Change-Id: Ib20d8b9b50626233852ca351452ce90841a39603
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make sure to properly close the cloned database connections and allow
one test for sqlite
Change-Id: Ia4eb4a684a3c432844e4b2a77bff69655b53f9b2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Make them templates, for two reasons:
- so they can accept std::pmr types and, in general, any basic_string
with custom allocators and char_traits
- to break overload ambiguities with the Qt string view types
Also, add the missing C++20 char8_t overloads.
Also, avoid creation of a QString in the sizeof(wchar_t) == 2 case
(Windows). Add a comment to optimize for the sizeof(wchar_t) != 2 case
later.
Found in API review.
Pick-to: 6.5
Change-Id: I30139520f582a38863a0936f8eca4b1ed33e37c8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
otherwise there is no way to synthesize a "click" through the a11y API.
toggleAction only leads to a toggled() signal but the user may be more
discerning and only listen to clicked() (or QAction::triggered) to react
to **user** events not all toggle events. as such pressAction is always
superior to toggleAction when user input is meant to be synthesized
through a11y tooling.
Change-Id: I7f024d57087b545d3cfd1805026ea538b0b3e166
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
C++20 doesn't like arithmetic with enums anymore. While this hasn't
caused immediate pain, yet, fix it pro-actively for an imminent patch.
As a drive-by, fix the missing space at start of comment.
Pick-to: 6.5 6.4 6.4.3 6.2
Change-Id: Id08bb227c587bc7b900c593a7b6d2655ca32eefd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also add one for types that are neither copy- nor move-constructible.
In contrast to resize(n), the QVLA(n) ctor worked for such types, so
make sure it stays that way.
Pick-to: 6.5 6.4 6.4.3 6.2 5.15
Change-Id: If54fbc9dd6a4808175c4bcb0ffb492b33c879746
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Use it in a few places.
[ChangeLog][QtCore][QMessageAuthenticationCode] Added
QCryptographicHash-style resultView().
Change-Id: I745d71f86f9c19c9a9aabb2021c6617775dab1cf
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Both QTimer's and QObjectPrivate's destructors print a warning if the
current object lives on another thread and has an active timer:
QWARN : tst_QTimer::moveToThread() QObject::killTimer: Timers cannot be stopped from another thread
QWARN : tst_QTimer::moveToThread() QObject::~QObject: Timers cannot be stopped from another thread
This timer is used to ask the thread to quit, which in turn allows us to
destroy this QObject without a cross-thread warning. Because it's
already fired once and done its duty, we can make sure it's not active
by simply making it single-shot.
Pick-to: 6.4 6.5
Change-Id: Ieec322d73c1e40ad95c8fffd17465067b27c044b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
A click on the selected item should deselect all other items before
editing starts.
Remove the part of the test case that assumes that we can have multiple
items selected in ExtendedSelection mode, and click on an item to start
editing while maintaining selection. That can never happen.
Pick-to: 6.5 6.4 6.2
Fixes: QTBUG-111131
Change-Id: I0312eed4614502cfb77eca26d3f7615427493d7d
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
The documentation for the RelationFlag enum was not very clear on what
was the "first" and "second" object.
And the fact that the AT-SPI backend (which these enum values originates
from) inverses "first" and "second" makes it harder to understand what
how it all fits together.
So when (with this change) Qt documents 'QAccessible::Labelled' as
"The returned object is labelled by the origin object"
AT-SPI documents ATSPI_RELATION_LABELLED_BY as:
"The origin object is labelled by the returned object"
(Documentation for AT-SPI is rewritten so that it shares the same
terminology)
Notice that the two objects are exchanged, which means that even if they
use the same 'Labelled' relation, the semantic gets 'inversed'.
This is already the case today, so we cannot change it. Therefore, to be
clear, the relation mapping will remain to be like this:
Qt Relation | Maps to AT-SPI | Qt explanation
----------------+-------------------------------+--------------------------------------------------------------------------------
Label | ATSPI_RELATION_LABELLED_BY | The returned object is a Label for the origin object
Labelled | ATSPI_RELATION_LABEL_FOR | The returned object is Labelled by the origin object
Controller | ATSPI_RELATION_CONTROLLED_BY | The returned object is the Controller for the origin object
Controlled | ATSPI_RELATION_CONTROLLER_FOR | The returned object is Controlled by the origin object
This mapping can already be seen in qAccessibleRelationToAtSpiRelation()
For the record, these future relations should then be mapped to like
this:
Qt Relation | Maps to AT-SPI | Qt explanation
----------------+-------------------------------+--------------------------------------------------------------------------------
Described | ATSPI_RELATION_DESCRIPTION_FOR| The returned object is described by the origin object
DescriptionFor | ATSPI_RELATION_DESCRIBED_BY | The returned object provides a description for the origin object
FlowsTo | ATSPI_RELATION_FLOWS_FROM | The returned object has content which flows logically to the origin object
FlowsFrom | ATSPI_RELATION_FLOWS_TO | The returned object has content which flows logically from the origin object
Change-Id: Ib245ec95564e4886dc6dbbb68abec2b23cd0e534
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Michael Weghorn <m.weghorn@posteo.de>
Runtime support is indicated via QRhi::Feature::HalfAttributes.
OpenGL support is available in OpenGL 3.0+, OpenGL ES 3.0+, and in
implementations that support the extension GL_ARB_half_float_vertex.
Other RHI backends (Vulkan, Metal, D3D11, and D3D12) all support this
feature.
Note that D3D does not support the half3 type. D3D backends pass half3
as half4.
tst_qrhi auto unit test included.
Change-Id: Ide05d7f62f6102ad5cae1b3681fdda98d52bca31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Amends 0242be9060, and removes unwanted
side effect of having a modified style behavior for later functions.
Pick-to: 6.5 6.4 6.2
Change-Id: If3dff0d7ab9e6c6c10e7a92d0a3eaff98fa1457f
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Add Algorithm::NumAlgorithms and use it to iterate over all
statically-available algorithms, querying their hashLengthInternal().
This avoids having to statically_assert(<= MaxHashLength) everywhere,
and auto-adjusts the buffer size in SHA1_ONLY builds.
Yes, the extra case labels for NumAlgorithms are a nuisance, but at
least the compiler will remind us when we forget, unlike a missing
static_cast(<= MaxHashLength) that might easily be forgotten.
Adjust the test (which iterates over the QMetaEnum for
QCryptographicHash::Algorithm, so finds NumAlgorithms and tries to
pass it to the hash() function which responds with a
Q_UNREACHABLE(). Only test hashLength() == 0 for that enum value.
Pick-to: 6.5
Change-Id: I70155d2460464f0b2094e136eb6bea185effc9d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Only Ukrainian is actually recorded in CLDR as using U+0415 as
exponent separator; all other Cyrillic-using locales officially use
plain ASCII 'E'. However, it seems reasonable, in all Cyrillic
locales, to recognize both (given that they look very similar).
Task-number: QTBUG-107801
Change-Id: I70a1e60a2d9fe7e254e01d32c5bad909ea4b8c76
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
In some locales signs and the exponent are not single character
tokens. Replace QLocaleData::numericToCLocale() with a tokenizer that
will cope with this. At the same time, cache the locale data needed in
support of that, so that we don't repeatedly recreate QString()
objects just to compare them against input tokens.
The caching class is inspired by Thiago's proposal for fixing the
performance, which also inspires the optimization of the C locale in
the tokenizer used here.
Add some testing that round-tripping numbers via strings works for the
locales with signs and exponents that use more than one character.
Task-number: QTBUG-107801
Change-Id: I9fd8409a371ed62ed969d9ebc8b09584e752f7fb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It was confusing entry capacity with the bucket capacity. The value
maxNumBuckets() returned was the maximum number of entries. This issue
was harmless: we would just fail to cap the maximum to an allocatable
size. But the array new[] in the Data constructors would have capped the
maximum anyway (by way of throwing std::bad_alloc).
So instead of trying to calculate what the maximum bucket count is so we
can cap at that, simplify the calculation of the next power of 2 while
preventing it from overflowing in our calculations. We continue to rely
on new[] throwing when we return count that is larger than the maximum
allocatable.
This commit changes the load factor for QHashes containing exactly a
number of elements that is exactly a power of two. Previously, it would
be loaded at 50%, now it's at 25%. For this reason, tst_QSet::squeeze
needed to be fixed to depend less on the implementation details.
Pick-to: 6.5
Change-Id: I9671dee8ceb64aa9b9cafffd17415f3856c358a0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Saw this on my FreeBSD VM. The backtrace() function thought the nearest
symbol to something was "_ZTSNSt3__110__function6__baseIFbPvS2_EEE",
which decoded to
typeinfo name for std::__1::__function::__base<bool (void*, void*)>
The function pointer type inside parameter threw the decoder for a loop
and caused it to crash with the failed assertion in qbytearray.h:
inline char QByteArray::at(qsizetype i) const
{ Q_ASSERT(size_t(i) < size_t(size())); return d.data()[i]; }
I noticed this
- because tst_qtimer hung
- because qFormatLogMessage deadlocked acquiring QMessagePattern::mutex
- because the logging recursed
- because qCleanupFuncinfo failed an assertion while formatting the
backtrace (my QT_MESSAGE_PATTERN has %{backtrace})
- because QTimer::~QTimer -> QObject::killTimer printed a warning
- because tst_QTimer::moveToThread produces warnings
Pick-to: 5.15 6.2 6.4 6.5
Change-Id: Ieec322d73c1e40ad95c8fffd17464f86e9725991
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
<bit> exists in C++20 and is properly both constexpr and optimized. But
in C++17 mode, we don't have constexpr bitops and instead elect to have
performance at runtime instead. But somewhere along the line, either
when they were added, when C++20 <bit> support was, or in any of the
bugfixes for other compilers, the nesting of #ifdef got messed up and we
declared that we had constexpr builtins for MSVC in C++17 too.
The macro QT_HAS_CONSTEXPR_BUILTINS isn't supposed to be used by anyone
else... but we ended up not being able to use it ourselves either. So
I'm renaming it to a more precise label.
Pick-to: 6.5
Change-Id: I9671dee8ceb64aa9b9cafffd1741b9b4060c9753
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The goal of this function is to ensure that dst is _always_
NUL-terminated. The only exception is if there's no space to write
even one NUL byte, of course, but not when src is nullptr but dst
would have space.
Update the docs to the new behavior and make them more precise.
Fix a test that assumed qstrncpy() would not write to dst for
(dst, nullptr, 10).
[ChangeLog][QtCore][qstrncpy()] Now NUL-terminates the target
buffer even when the source pointer is nullptr, provided the
target buffer has space for at least one byte.
Pick-to: 6.5 6.4 6.2 5.15
Change-Id: I7806d8c71e260f8f02b79af7b6ce94f23599dd69
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The window stack will now upkeep three groups of windows, always
on bottom (1), regular (2), always on top (3). Windows belonging to
(3) will always appear on top of (2) and (1), and windows from (2) will
always appear on top of (1).
The first window created in the application gets the (1) status, which
is in line with the root window mechanism used before.
Activation has now been decoupled from the top position on the window
stack as a window in (1) or (2) may be active, in spite of the top
window belonging to a higher group.
Fixes: QTBUG-110098
Change-Id: I51f4d2d47163fab26ce5ef28f7a4f23a522c7f91
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Test documented behavior and serv as a baseline for future changes.
Change-Id: I36a914694d5244c89f28f3e403e11d65492a5eef
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
They were leftovers from QTDS driver removed with Qt6
Change-Id: I34863912bd41e0b4ca54bf443001f1cb3f20511a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We so far refetched the first observer after evaluating bindings, as
binding evaluating might change the list of observers.
However, that approach did not take into account that the 'this' pointer
might no longer be valid after binding evaluation: In case of a
QObjectBindableProperty (or a QObjectCompatProperty), binding evaluation
might cause a reallocation of the binding storage, and consequently the
invalidation of the QPropertyBindingData.
Fix this by refetching the QPropertyBindingData from the storage (if a
storage has been provided, which is always the case for the affected
classes).
Fixes: QTBUG-111268
Pick-to: 6.5 6.4 6.2
Change-Id: Ie7e143a0bbb18f1c3f88a81dd9b31e6af463584f
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The QtSql for Mimer SQL sqldriver makes it possible to work with the
Mimer SQL database on different plattforms. There are drivers for
several other databases in QtSql and a driver for Mimer SQL will
benefit many users.
To build the Mimer SQL driver, download Mimer SQL from
https://developer.mimer.com
[ChangeLog][QtSql]
Added a QtSql plugin to work with the Mimer SQL database
Fixes: QTBUG-111219
Change-Id: Id6ba5de4de01189d0516ffbfa89efcb0d013115f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Drive-by change: use UTF-16 instead of UTF-8 for Eastern Arabic
Numerals, both are not human-readable but UTF-16 is one code point
instead of the two for UTF-8, less \x.
Pick-to: 6.5
Change-Id: I721f3989b7d776ddc4f9d337b21dca9d398fcc0d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Constructing from const char* etc is already covered by
constructorQByteArray.
I took a guess that the "// b(10)" comment is about testing constructing
a QString from a QChar[] that has an explicit \0 charcater. I tried
finding what the initial intent was but the trail went cold at the
"Initial import from the monolithic Qt" commit.
Pick-to: 6.5
Change-Id: I15bcdb24e55286eb6cd3056af0714a1eed581635
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise, double-click recognition will fail.
Use QEvent::clone when possible, or set the timestamp explicitly when
not.
As a drive-by, remove some long-dead code in affected code lines.
Fixes: QTBUG-102010
Pick-to: 6.5 6.4 6.2
Change-Id: I882bf6e8090bf6f182b7a0a3c62aa3a4c8db2e14
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
I.e. the second arg to QCOMPARE isn't what's being tested.
Drive-by changes:
- More _L1 usage, less blocky and easier to read
- QCOMPARE's second arg can be a View, it is smart enough and can
compare them just fine
- Replace a "//15 chars" comment with a QCOMPARE check
Pick-to: 6.5
Change-Id: I4f4b84b16b543df37b0ba2f9dd781b045b2ed397
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As of macOS 10.14 the keyboard assistant background is shipped as part
of the compiled asset catalog of the app, so looking it up via a URL
will fail.
Instead we look it up via NSBundle's dedicated image lookup function,
which handles both cases.
The logic has also been moved to qwizard.cpp, since the additional
plumbing via QPlatformNativeInterface was unnecessary.
The keyboard assistant itself no longer shows the background image
as of macOS 12, so we might consider doing the same, but the design
of the assistant has also changed significantly, so as long as our
QWizard layout looks like the old keyboard assistant we keep the
background as well.
Pick-to: 6.5 6.2
Change-Id: I7d42dd79b285f3518837458864bca6bc353b3b6d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
- Port macros to QTest data rows in separate unittests
- Move DOUBLE_TEST-related data to toDouble() unittest
- Drop one redundant unittest:
QTest::newRow("const-charstar") << (const char*)0;
Pick-to: 6.5
Change-Id: Ie809895e9f5d58c2d3ec419689f409b55e24fcf7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And switch to using test data rows (rooting out two macros in the
process).
Pick-to: 6.5
Change-Id: Ib31e6b59f90f0983c0efc4bef7cb246aedfcab5b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
