Commit Graph

39 Commits

Author SHA1 Message Date
Olivier Goffart
482d96a0c5 Force -fPIE on ELF if Qt is built with reduced relocations
Put in qconfig.h whether qt is compiled with reduced relocations.

When using -Bsymbolic-functions (enabled by default on Qt)
but not -fPIE, the comparison of the function pointers fail
because the addresses are different in Qt, and in the executable.

Hence we now enable -fPIE by default on qmake, and force a compilation
error when it is not enabled and built with reduced relocations.

Done-with: Sune Vuorela <sune@vuorela.dk>
Change-Id: Ib3fdba06fab6e8a93b75b4c6cf16cc973ab335db
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2012-02-10 11:42:31 +01:00
Rohan McGovern
adfca27ac0 Fixed tst_qobject::property for clang
The test was failing at:

  QCOMPARE(property.userType(), qMetaTypeId<CustomType*>());

The CustomType* metatype was not registered before this part of the
test.

qMetaTypeId<T> will register the metatype for T before returning it if
it is not yet registered, while QMetaProperty::userType() returns 0 if
the metatype is not yet registered.  However, the order of evaluation of
these two expressions in the above statement is technically undefined.

Apparently, gcc evaluates the arguments in order from right to left,
allowing the test to pass, while clang evaluates the arguments in order
from left to right, causing the test to fail.

Change-Id: I5059556e860cec29b57c31e4e26f46cf9e6055da
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
2012-02-09 10:45:38 +01:00
Jędrzej Nowacki
56265031b7 Align QVariant::UserType and QMetaType::User
There is no point in keeping separate values which should mean the
same.

QVariant::UserType was used also to construct a valid, null QVariant,
containing an instance of unknown custom type. The concept was strange
and useless as there was no operation that could be done on such
QVariant. Therefore it was dropped.

Please note that the patch slightly changes behavior of different
functions accepting a type id as parameter. Before QVariant::UserType
was an invalid type from QMetaType perspective (id 127 was not assigned
to any built-in type), but QMetaType::User points to the first registered
custom type.

Change-Id: I5c7d541a9affdcdacf53a4eda2272bdafaa87b71
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Andrew Stanley-Jones <andrew.stanley-jones@nokia.com>
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
2012-02-07 08:52:32 +01:00
Jason McDonald
5635823e17 Remove "All rights reserved" line from license headers.
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.

Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-01-30 03:54:59 +01:00
Olivier Goffart
889092504e Call connectNotify when connecting with function pointer
Some objects expect connectNotify to be called in order the signal to be
emitted.

Change-Id: Id0460d9c2aef8f9c3618a2b62b2119a790e06f30
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2012-01-29 12:40:51 +01:00
Kent Hansen
00c8984b4e moc: Use QMetaType::QVariant as the type for QVariant
QMetaType::QVariant has existed as a proper type for almost two
years, but the qvariant_nameToType function was written in 2006.

Using QMetaType::QVariant means QVariant can be treated just like
any other type. We can get rid of those hacky checks for LastType,
and the remaining checks become more readable.

The fact that QMetaProperty::{type,userType}() returned LastType
(0xffffffff) for QVariants was never documented (LastType itself is
internal). But there are other Qt modules that assume so. I'll fix
the ones I know about (qtdeclarative, qtscript, activeqt).

Change-Id: I799b9079bb8bbb1fe76c132525440b30415cbac5
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
2012-01-25 08:46:40 +01:00
Friedemann Kleint
4fa2d51cf1 tst_qobject: Run as console application.
Change-Id: If3049249cf8ceeb0985d158209e217455bfc3c47
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
2012-01-25 02:24:29 +01:00
Friedemann Kleint
992e50e421 Add autotest for failing signal connection.
Change-Id: Iaae93253fa6d1ca0798d05d69a7ab6d6ff8b60bc
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
2012-01-24 19:12:23 +01:00
Olivier Goffart
c0323cfbaf Test connecting to virtual function pointer
The C++ standard says that the comparison between pointer to virtual
function is unspecified (C++11 $5.10.2)
But we still may rely on it for the Qt::UniqueConnection and the
disconnection

So test if it works while using the same function.
Using function from different classes works for me, but we should
probably not assume it works. I left it commented in the test for
reference.

Change-Id: I1d9b91d4cc1a424d4f43ef2ee4981b8573f1e86f
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2012-01-24 01:13:01 +01:00
Jason McDonald
629d6eda5c Update contact information in license headers.
Replace Nokia contact email address with Qt Project website.

Change-Id: I431bbbf76d7c27d8b502f87947675c116994c415
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-01-23 04:04:33 +01:00
Jason McDonald
1fdfc2abfe Update copyright year in license headers.
Change-Id: I02f2c620296fcd91d4967d58767ea33fc4e1e7dc
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-01-05 06:36:56 +01:00
Jason McDonald
fda36df6ba Use true and false in preference to TRUE and FALSE in tests.
Use the C++ boolean constants true and false instead of the C macros
TRUE and FALSE (which are actually integers), and use QVERIFY instead of
QCOMPARE for verifying simple boolean expressions.

Change-Id: Ie76dfcab6722df6b93b3fa62b0f3437901482932
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2012-01-03 02:57:12 +01:00
Bradley T. Hughes
ae8c61db21 Finish removing Qt3 support
Remove the (-no)-qt3support options from configure, and remove the last
remaining references to Qt3Support, QT3_SUPPORT, and
QEvent::ChildInserted.

The compatibilityChildInsertEvents() tests in tst_QObject and
tst_QWidget have been renamed to childEvents(), which is a more
appropriate name.

Change-Id: Id0b45e9b177efcc8dceee8c9ed8afafedeeace2f
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
2011-12-23 11:59:11 +01:00
Alan Alpert
cb9b7ceffb Revert "Revert "Add QObject::objectNameChanged(con... signal""
This reverts commit 9b17557f3b.

Justification: Temporary commit, see JIRA task.
Task-number: QTBUG-22985
Change-Id: I3df9eb5fdbdc133349dca5e192dcfcc9e758626c
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
2011-12-20 11:15:21 +01:00
Olivier Goffart
87679491cb Do not call QueuedConnection slot on partialy destroyed object
This is a regression introduced in Qt 4.8
When QApplication::processEvents is called from a destructor, it is
possible that pending events would still be called on the already
destroyed subclass.
Prevent that by using the same pattern as in QMetaObject::activate

Change-Id: Ida50db07ae089264402dafcde7a41a066479d08b
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
2011-12-19 14:06:12 +01:00
Giuseppe D'Angelo
be6b29f001 Fix typos in QObject::(dis)connect warnings
For some strange reason "Object::method ..." was printed, without
the leading Q.

Change-Id: I10b99e8aa8730e4020d15b3e04a01004bade76c3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
2011-12-15 05:48:27 +01:00
Friedemann Kleint
ab272fff56 QObject-test: Reorganize subprocess.
On Windows, the signalbug.exe could not be launched since it is
not next to tst_qobject.exe, which is in one of the
'release', 'debug' subfolders.

Introduce a subdirectory structure similar to that of
the QProcess test and use QFINDTESTDATA to locate it.

Change-Id: Ie8f2ede8cb76f22a908cb77517a74076be11fbb7
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-12-14 07:07:09 +01:00
Jason McDonald
e3640d1bdd Remove TESTED_CLASS/TESTED_FILES comments from tests.
These comments were mostly empty or inaccurate.  Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.

Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-12-06 02:19:25 +01:00
Martin Jones
9b17557f3b Revert "Add QObject::objectNameChanged(const QString &objectName) signal"
This reverts commit ba635d7e74.

Breaks tests in declarative:
tst_qdeclarativeecmascript::deleteLater
tst_qquickvisualdatamodel::objectListModel

Change-Id: I467b45109332e66fc62f3de00f376b1b88ab19ca
Reviewed-by: Alan Alpert <alan.alpert@nokia.com>
2011-12-02 06:03:12 +01:00
Bradley T. Hughes
ba635d7e74 Add QObject::objectNameChanged(const QString &objectName) signal
This is sent when the object's name changes.

tst_moc must be updated since the method count of QObject has changed.
The test assumed that there were 4 invokable methods in QObject. The
new signal is the 5th, which breaks the test's assumptions. Fix this
as well.

tst_QObject must be updated since the
QObjectPrivate::isSignalConnected() method only supports the first 64
signals. With the addition of this new signal, sig61() in the test
becomes the 65th signal, and will always appear connected now.

Task-number: QTBUG-13999 (related)
Change-Id: Ie87893c71a231fafa7ccf2f16102238a7be8327a
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
2011-12-01 17:46:57 +01:00
Rohan McGovern
3385fb91e1 Fixed installation of corelib tests
In .pro files, removed wince/symbian-specific DEPLOYMENT cases and
replaced them with TESTDATA where appropriate.

In .cpp files, removed SRCDIR and relative paths to testdata and
replaced them with the QFINDTESTDATA macro where appropriate.

Modified test helper apps/libs to install themselves under the test
they relate to.

This change allows corelib tests to be correctly installed, along with
their testdata, via `make install'.

Change-Id: I5e202e2f3b577af7e39072d5c9fe13e0ca125304
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
2011-12-01 09:12:52 +01:00
Olivier Goffart
cc9c85ecd6 Support for up to 6 arguments in the new connection syntax
For compilations without variadic template support

Change-Id: I78af4f6022ad7a0923e5c5788a34eb7d834f50f3
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
2011-11-30 17:19:07 +01:00
Jason McDonald
75b66dc8b0 Cleanup corelib autotests
Remove references to the old bug tracker.  The data from the old bug
tracker is no longer accessible, so these markers are meaningless.

Change-Id: Ib9d029d52b70fd0a512b9532d65f03763eabfe57
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-11-30 07:49:32 +01:00
Olivier Goffart
55b974faa1 Fix Qt::QueuedConnection when signal has a return value
For queued connections, the args[0] is set to null as it make no sens to
forward the return value to the signal.
So we need to check in the operator, that the pointer is not null.
(container.data is args[0])

Change-Id: I80bde66f1ec19de0f4962c80e5b2797d2819075c
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
2011-11-30 01:04:12 +01:00
Olivier Goffart
0dec6250f7 Support Qt::UniqueConnection in the new connection syntax
This commit also improves the related documentation a bit.

The test is copied from the test with the old syntax, but all the
connection statement are changed to use the new syntax

Change-Id: Ia5630ca4335b9f8ca6d724ae3c8750d6f0804d8e
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
2011-11-29 17:11:59 +01:00
Olivier Goffart
1c5db1aff3 Initialize the return value of signals
Before, the constructor was called for complex objects, but
POD were left unitinialized. Now, they are zero-initialized.

Also add test for return values

Change-Id: Iff9bf6687589d7b7395a71fb6f650ab8aa2b6bd1
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
2011-11-29 17:08:39 +01:00
Olivier Goffart
ed0b262de9 QObject::disconnect with new syntax
This add an overload to disconnect which is symetrical to the new
syntax of connect.

It is possible to diconnect connection like this:

QObject::connect( sender, &Sender::valueChanged,
                  receiver, &Receiver::updateValue );
QObject::disconnect( sender, &Sender::valueChanged,
                     receiver, &Receiver::updateValue );

This overload only work with pointer to member function, and not static
functions or functors.

The test is copied from tst_QObject::disconnect(), just
changed the syntax of the connection and disconnection

Change-Id: Ia8f819100cb12098e32877522b97b732b1e676a8
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
2011-11-29 17:08:39 +01:00
Olivier Goffart
489a39aacc More tests for the new connection syntax.
Those tests are the one from Thiago's C++0X implementation
The rvalue references ones are commented out because moc do not
understand them yet
But supporting them may come later.

Change-Id: I6b0720e7f2992be9f7e34770960fa58fa456a54b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2011-11-25 01:12:14 +01:00
Olivier Goffart
66b659c8a4 Add support for QueuedConnection when connecting using the new syntax
QMetaCallEvent now can handle a pointer to QSlotObjectBase

Change-Id: I94da1e68ce9bb1fd96a9ae013a389552eb625faa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2011-11-25 01:12:14 +01:00
Olivier Goffart
583c55b243 New QObject connection syntax
In addition to the old connection syntax, you can now connect using function pointers.

    connect(sender, &Sender::valueChanged,
            receiver, &Receiver::updateValue );

You can connect also to functor or C++11 lambdas

The connections are now type safe (no more problems with namespaces
or typedefs).  Implicit type conversion is also supported.

The new syntax forces us to change the meaning of signal form
protected to public, in order to be able to access the signal's
address everywhere

The way it works is by introducing new overload of QObject::connect
that take function pointer as parametter. Those new overload are template
function, that are implemented inline. The actual implementation is
in QObject::connectImpl which take a QObject::QSlotObject* as parametter
for the slot.  That slot object contains a virtual function which call
the slot which has to be implemented in the header as it depends on the
template parametter.  So the internals of QObjectPrivate::Connection
will store this QObjectSlot* in order to be able to make the call.

You can read a full description here:
http://developer.qt.nokia.com/wiki/New_Signal_Slot_Syntax

History of commits before it was imported on gerrit:
https://qt.gitorious.org/~ogoffart/qt/ogoffarts-qtbase/commits/qobject_connect_ptr

Thread on the mailing list:
http://lists.qt.nokia.com/pipermail/qt5-feedback/2011-August/000796.html
http://lists.qt.nokia.com/pipermail/qt5-feedback/2011-September/001248.html
(The discussions on the mailing list were about trying to find a
solution that do not need making signals public, but no user friendly
solution was found)

Note: support for QueuedConnection, and the symetric QObject::disconnect is
added in another commit.
Qt::UniqueConnection is not supported yet in the new overload.

Change-Id: I67d08436b0720e7f2992be9f7e34770960fa58fa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
2011-11-25 01:12:14 +01:00
Olivier Goffart
fd9ebabe14 Fix warning in tst_qobject
signal4 is not used in that function

Change-Id: I69f39a4639bfae067c411fd1166fc36ca3febbc5
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
2011-11-11 16:47:23 +01:00
Jason McDonald
94fc875079 Cleanup corelib autotests
Tidy the autotest .pro files.  Most autotest .pro files should look like
this:

CONFIG += testcase
TARGET = tst_something
QT = core testlib
SOURCES = tst_something.cpp

Change-Id: I877c2194e9fa9dd13478d117895e1e255a948ad7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-11-11 02:45:05 +01:00
Jason McDonald
8e11f7c93a Cleanup corelib autotests
Remove literal tabs.

Change-Id: I210a0259773cceb20d35ebc80b889e3ebb88b540
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-11-10 04:42:45 +01:00
Jason McDonald
e8f7fccf22 Cleanup corelib autotests
Remove redundant empty constructors, destructors and test functions.

Change-Id: Idb51368895e67ec3fc0345a9a5d33d77730c051b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-11-07 13:26:41 +01:00
Rohan McGovern
07102cebde corelib: eliminated usage of qttest_p4.prf
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.

Change-Id: I7c1ffe9c8c294dbdc988e1582e580b1ed3f4593e
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
2011-10-25 05:03:08 +02:00
Jason McDonald
7cfad460c5 Avoid using QSKIP in lieu of compile-time checks
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe.  If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.

Task-number: QTQAINFRA-278

Change-Id: Ib2025339422749cf216e87ac414a3056250bf8f9
Reviewed-on: http://codereview.qt-project.org/5942
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-10-05 03:04:31 +02:00
Jason McDonald
95cebd34eb Remove Symbian-specific code from tests.
Symbian is not a supported platform for Qt5, so this code is no longer
required.

Change-Id: I1172e6a42d518490e63e9599bf10579df08259aa
Reviewed-on: http://codereview.qt-project.org/5657
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
2011-09-29 06:41:42 +02:00
Kent Hansen
b8d656d878 Fix autotest gui/widgets dependencies
This is in preparation of removing testlib's
dependency on QtGui and QtWidgets.

Autotests that need QtWidgets api must
explicitly include it (since the types are no
longer provided by the QtGui master header).

Autotests that don't need QtGui or QtWidgets
api shouldn't link against those libraries.

Change-Id: I2808289068514fcac582808828ad4634e2631733
Reviewed-on: http://codereview.qt-project.org/5093
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
2011-09-19 10:24:25 +02:00
Holger Ihrig
3a7e6157d1 Moving relevant tests to corelib/kernel
Added Test for qmetaproperty

Marked QSocketNotifier Autotest as insignificant. See QTBUG-21204

Marked qtranslator Autotest as insignificant. See QTBUG-21125

Marked corelib/io/qfile/largefile as insignificant. See QTBUG-21175

Task-number: QTBUG-21066
Change-Id: I2a7f6587845c355091bb07c8dd3d1557d16db0be
Reviewed-on: http://codereview.qt.nokia.com/3598
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
2011-09-01 12:42:14 +02:00