Those tests are the one from Thiago's C++0X implementation
The rvalue references ones are commented out because moc do not
understand them yet
But supporting them may come later.
Change-Id: I6b0720e7f2992be9f7e34770960fa58fa456a54b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMetaCallEvent now can handle a pointer to QSlotObjectBase
Change-Id: I94da1e68ce9bb1fd96a9ae013a389552eb625faa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In addition to the old connection syntax, you can now connect using function pointers.
connect(sender, &Sender::valueChanged,
receiver, &Receiver::updateValue );
You can connect also to functor or C++11 lambdas
The connections are now type safe (no more problems with namespaces
or typedefs). Implicit type conversion is also supported.
The new syntax forces us to change the meaning of signal form
protected to public, in order to be able to access the signal's
address everywhere
The way it works is by introducing new overload of QObject::connect
that take function pointer as parametter. Those new overload are template
function, that are implemented inline. The actual implementation is
in QObject::connectImpl which take a QObject::QSlotObject* as parametter
for the slot. That slot object contains a virtual function which call
the slot which has to be implemented in the header as it depends on the
template parametter. So the internals of QObjectPrivate::Connection
will store this QObjectSlot* in order to be able to make the call.
You can read a full description here:
http://developer.qt.nokia.com/wiki/New_Signal_Slot_Syntax
History of commits before it was imported on gerrit:
https://qt.gitorious.org/~ogoffart/qt/ogoffarts-qtbase/commits/qobject_connect_ptr
Thread on the mailing list:
http://lists.qt.nokia.com/pipermail/qt5-feedback/2011-August/000796.htmlhttp://lists.qt.nokia.com/pipermail/qt5-feedback/2011-September/001248.html
(The discussions on the mailing list were about trying to find a
solution that do not need making signals public, but no user friendly
solution was found)
Note: support for QueuedConnection, and the symetric QObject::disconnect is
added in another commit.
Qt::UniqueConnection is not supported yet in the new overload.
Change-Id: I67d08436b0720e7f2992be9f7e34770960fa58fa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
From a bool to a handle to to connection.
Also added a new overload of disconnect that disconnect a handle
This is required because with the new syntax taking lambda or functors,
it is the only way to disconnect a connection (as it is impossible to
compare functors)
The new return value is QMetaObject::Connection, it is a wrapper around
the internal QObjectPrivate::Connection.
QObjectPrivate::Connection is now reference counted.
tst_qglobal.cpp:
This test set up an internal callback, and the callback do not set any
proper connection handle (and tbh, it would be hard for it to do so).
So the returned QMetaObject::Connection is invalid, and ok is false
(Internal callbacks are only used for jambi and should probably be removed)
Change-Id: I111626fb4f47efc4db5e2ea5bff9da15f08fea7b
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Support the common construct of a top-level test directory having
a test/test.pro with:
TARGET = ../tst_sometest
TESTDATA = ../data1.txt ../data2.txt
Prior to this change, the ".." in TESTDATA would cause the data to
break out of the test's installation directory.
Change-Id: I22860bf3a148f278b3f4e18b476fd151f7f0f775
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Navigate would return a random pointer here when asked for example for
not handled relations (label etc).
Change-Id: Iec4de94e6f76f14e89b43fe7327d98878aad58ee
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
This property is no longer necessary because we can now set the user
agent directly on the proxy.
Task-number: QTBUG-17223
Change-Id: I27cb126dd401f02525290d2317650f55cae9f4ef
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The API is the same that is present on QNetworkRequest class. Since
these are HTTP headers, this only affects proxies of type HttpProxy and
HttpCachingProxy.
This was created as a general solution to the problem pointed out in
QTBUG-19569(some proxies only accept request with specific User Agents).
In the same way that there are cases where setting the User Agent is
desired there might be reasons to set other headers, hence the support
for any header.
Change-Id: Ifd04f34d29eedb6c2a3f0b50708244996b12a123
Task: QTBUG-19569
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This allows for more focussed notification of what part of the
model has changed layout.
The slots in the proxy models can be more optimized later.
Change-Id: I1bd17465b4be6f8efdc107036db897c557fcb519
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Debug snapshots and release snapshots aren't compatible. Both a
debug version and release version of the mkv8snapshot tool must be
built, and the corresponding executable selected when building v8.
Adopt the library naming convention for naming the mkv8snapshot
executable ("mkv8snapshot" in release, "mkv8snapshot_debug" in debug
on Mac, "mkv8snapshotd" in debug on Windows).
Change-Id: I7a94b09e7db7ed8bbaa293637c092a1d1d1dbaba
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
... and use it in QCoreApplication::notifyInterna() instead of
"reinventing" the wheel there. The constructor and destructor for
QScopedLoopLevelCounter are inline, so the class does not need to be
exported.
Change-Id: I7af5a4ef0987f277bcc50c1057f3c74152f3d79d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
There's no real reason for the typedef here, QtNetwork
will compile without it and it might conflict with
openssl.
Change-Id: Id352ccc98d84ca9ee9ea3c7b4a942382882173f1
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Remove usage of QDirectFbConvenience::dfbDisplayLayer in the
QDirectFbBackingStore code and resolve the IDirectFBWindow through
the QPlatformWindow.
Change-Id: Ia7db8dedc91096648bc9de029d034002ba0d6a03
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
No need to go from IDirectFBWindow -> WindowID -> IDirectFBWindow
to attach the event buffer for the event system.
Change-Id: Ia5f7c20d06e8e1da5142f1bd99ca69906107adba
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
In case we fail to initialize DirectFB, use the DirectFBErrorFatal
to quit as there is no way we can recover from this error and the
QPA backend has already been selected.
Change-Id: I8001bf32d0a14ba21c2ec13121748a6384b87c2b
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
This patch is contributed by Thanomsub Noppaburana from libthai. It
added a special thai shaping function to handle SARA AM character
for fonts without OpenType rules to support it, like Nokia Pure Text
AS.
With modification to logClusters assignment to make sure that
QTextLine::glyphRuns(int from, int length) returns correct glyphs.
Task-number: QTBUG-21206
Change-Id: I5a78ee1ab2b4c874c7d0df17d4ee6d264ed5a790
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The forwarding headers in 'include/Qt' were deprectated in Qt 4. This is
Qt 5, so time to remove them.
Change-Id: I4bf3797475b91f58af1761ed4165b552613299b3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Instead of assuming which layer was assigned to Qt, resolve the to
be used layer via QWindow::screen()->handle(). Add a method to the
DirectFB QPlatformScreen to provide a pointer to the IDirectFBDisplayLayer
Change-Id: Iaea9466ca84daff752a4932deafbe38f48123715
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
The screen handling will get a bit more complex due the integration
of different ways to do OpenGL. Move to a new file.
Change-Id: Ibe3e397d13da1b270ec4afaf046d28be50e976f9
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
The modified test was using QVERIFY in the destructor of a local class,
but QVERIFY should only be used directly in a test function. This
commit changes the local class to record the result of the test and
verifies that result in the test function.
Change-Id: Ie68ac6aa880368c961ebfa67cd452f0fbf26db89
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The ScreenOrientation enum was changed so that the values are power of
twos, angleBetween() needed to be fixed in order to reflect this.
Task-number: QTBUG-22554
Change-Id: Ia45dd6643b40b14204abf967b00c0d04834736a3
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QDBusArgument extraction operators and QDBusDemarshaller that implements
the extraction do not check the type of the extracted value.
Helper function template qIterGet in qdbusdemarshaller.cpp that is used
for extracting basic data types only reserves space from the stack for
the expected type as specified by client.
If the actual type in the DBus parameter is larger stack will be
overwritten in the helper function by at most 7 bytes (expected one byte,
received dbus_uint_64_t of size 8 bytes).
The fix always reserves space for the largest basic type dbus_uint64_t
readable by dbus_message_iter_get_basic API.
See also http://dbus.freedesktop.org/doc/api/html/group__DBusMessage.html#ga41c23a05e552d0574d04
Task-number: QTBUG-22735
Change-Id: I9aa25b279852ac8acc40199a39910ea4002042d7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Apparently, MSVC preprocessor do not understand correctly the defined()
in that macro (used in another #if)
Change-Id: I9bd102eb4e0cbaa65bea48db786a45d861491ad7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
While still lacking, at least try to reflect reality a bit.
Change-Id: I8fcd0bd540806f3d1e314c60d854d2a90f66c14e
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
This makes the accessibility apis much
simpler and less error prone.
Disable the itemviews implementation that is in complex widgets.
The itemviews will use the new code from itemviews.h/cpp everywhere now.
QToolBox was broken before, now at least it simply exposes all its children.
The children are the buttons (tabs of the toolbox) and their contents.
Change-Id: I45e218f49f02aebbd678ddfe29f94c2a112a2125
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
-system-sqlite should be used when system SQLite library should be
used instead of the one embedded in Qt. This information is added
to SQLite driver documentation.
Change-Id: Ie51cb0d7c4044b74a64192ad8a5c946e21ee0ed9
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
SQLite driver support only one statement at a time. This fix makes the
exec and prepare call failed if more than one statements are given.
This is bug fix for QTBUG-21884. Also the behaviour is documented in
the API specification.
Task-number: QTBUG-21884
Change-Id: If1e25a0dd9f9ee38961ef478fc7909f6b05e360a
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
In the QProcess test, QHostInfo is used as a quick and easy way to
create a background thread, and so is not (entirely) unnecessary.
Change-Id: I7204f113e7bc8a4b312d5a20f0a6ee076c56b35d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This variable was renamed from `elem' to `file' at some point in
development, but the old name was left at one place.
Change-Id: I2cda42b02a753614176b466e507e8d8d9ed80a6e
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Tests will install under $$[QT_INSTALL_TESTS].
TESTDATA may be used to install additional testdata required by the
test.
The default install rule may be disabled by
CONFIG+=no_testcase_installs.
Change-Id: I204de60c8e844775906ffd016ca50bffbb414142
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
From the commit message of 0b2ce85200 and
the code in qt_module.prf, it is apparently intended that qmodule.pri is
installed, but this was never implemented correctly. Make sure we
install it.
This has gone unnoticed because it happens to be installed by accident
unless $$QT_SOURCE_TREE != $$QT_BUILD_TREE and
$$QT_BUILD_TREE != $$[QT_INSTALL_PREFIX] (i.e. a shadow build which is
not using -developer-build).
Change-Id: Iee861a7bb592ca43a61ad91f1ef6a7a5bd21aff8
Reviewed-by: Jyri Tahtela <jyri.tahtela@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QMetaTypeGuiHelper was generalized and renamed to QMetaTypeInterface.
From now all types will have common interface which can be used for
basic operations.
Change-Id: I50d67f4a8081fa0f75c9d530a8211593ec37bc55
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
libstdc++ provides the fenv.h found and for uclibc default toolchains
the bits/c++config.h has _GLIBCXX_HAVE_FENV_H undefined leading to
no import of the uclibc fenv.h
Change-Id: I53173b099f3d8791f527f1ccb60991de57cd19db
Filed: https://bugs.busybox.net/show_bug.cgi?id=4484
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
- Add --strip-module option to strip the module name for portable
code
- Use GetOpt::Long
- Streamline, remove need for rewinding the file
- Streamline output, just report affected classes and introduce
--verbose for normal operation.
Change-Id: I8643a5f53d4ed8ce2ae44721164cbdba1aad8b46
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
A V8 snapshot is a serialized representation of the JavaScript heap.
Using a snapshot can vastly speed up V8 initialization.
This commit introduces a new tool, mkv8snapshot. mkv8snapshot is
automatically invoked as part of building QtV8, and generates a .cpp
file which is compiled into the QtV8 library.
Because mkv8snapshot itself needs to initialize the V8 environment
the non-snapshot way (i.e., by evaluating thousands of lines of
JavaScript), it needs to build all of V8. This means that V8 is
effectively built twice when snapshots are enabled.
When cross-compiling, only host=i386 and target=arm is supported,
since that's the only relevant case for which V8 currently
supports a simulator. mkv8snapshot is built and run as a host tool
(using the simulator), and generates a snapshot that will be used
on the target.
Task-number: QTBUG-21152
Change-Id: I9270652f129505508f78db8b0a39fbf57dc8b86d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
x,y,width,height,visible and orientation
Includes slot setters and notify signals for maximal QML compatibility.
Change-Id: I124399093c00f8ad1485d4fbae816dfbe3027eff
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
In the infinite wisdom uclibc defines __GLIBC__ but is not a
full drop-in replacement for the GLIBC. Check for !UCLIBC. Make sure
there is a disableHooks in case the GLIBC code is not compiled
Change-Id: I246d3ee7c1d3f48f7f6445daa01a4f001b9a3cb0
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
The removal of plugin cache in qt5 (8ed47d961d)
means that only the original loading error (from QElfParser) is reported.
In Qt4 this was previously two different strings depending on if the library
had been previously cached.
Task-number: QTBUG-22834
Change-Id: I15a4adc7d0f8f23f16bb2aa8ba8b968db770f074
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QTimeLine::reset() never made it into the public API. Instead
QTimeLine::start() always starts from the beginning.
Remove the commented-out test for reset() and related remnants in other
tests. Restarting a timeline using QTimeLine::start() is already tested
by the restart() test function.
Change-Id: Ia5c767ddae0781d645a407fbea76e80672895aab
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Before QTimeLine made it into the public API, the toggle() function
became toggleDirection() and isReversed() became the more generic
direction(). This commit uncomments the old toggle() test and uses the
final function names.
Change-Id: Ie3379f32ff0c78436f33c2733232d795ca88152b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
