Remove the stale Qt 5 CMake files.
Disable the generation of CMake files by the qmake build system,
it wouldn't create usable Qt 6 files anyway.
Keep mkspecs/features/create_cmake.prf and
mkspecs/features/cmake_functions.prf for now until we can confirm that
they are safe to remove.
Task-number: QTBUG-86827
Change-Id: Idcf59f4d7d5474171a9bf72904ff19adc8bc74cd
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qmlimportscanner and rcc in Qt 6.0 are part of the host installation
and not in the target installation which androiddeployqt expects it to be.
Fixes: QTBUG-86831
Change-Id: I9d7a6fce3d2f109bab933fcfd7fdd5d2c83821a8
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
All system frameworks use 'A' instead of the major version of the
framework, and Xcode's code signing assumes that the framework version
is 'A' when signing embedded frameworks (FB7323980), so leave the
version 'A'. This is also what Apple recommends.
Change-Id: Idbf2e30e156c3e869da8f75731e568524d9407e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Clang doesn't automatically switch architecture just because we're
passing an iPhoneOS sysroot. In the past this resulted in a warning
about trying to link an x86_64 binary to arm64 libraries, but with
Xcode 12 this is now a hard error.
Fixes: QTBUG-86718
Pick-to: 5.15
Pick-to: 5.12
Change-Id: I7e9d2ca513d276029fc2a6cfe694a35fe41c39b3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Use -source 8 and -target 8 for javac by default.
Task-number: QTBUG-86282
Change-Id: I291beab4df166468972138822ca26f01c9666985
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The configure options -android-javac-source and -android-javac-target
can be used to set the version numbers.
Fixes: QTBUG-86282
Pick-to: 5.15
Change-Id: I36b0665de2c31e16bf6d138859b5503455eb8e66
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
If '-make examples -no-compile-examples' was specified, sources of Qt's
examples would be installed, but the examples would not be built.
This switch has always been a source for confusion and is only
interesting for distributors, who can just package the examples
directory tree.
Change-Id: I0291d70e4951d98b553a4abf217db49d05316d3a
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
AndroidManifest.xml file and the Android plugin already has a way
to provide commandline-arguments to app with the tag
"android.app.arguments". This change allow to set it from qmake/cmake
and allow Qt Creator to use that.
Task-number: QTCREATORBUG-23712
Change-Id: I3e680f40fd36ba6aaac7f344fb9509d2c3360e74
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Before this change, configure -force-asserts would affect qmake-based user
projects too, potentially forcing the user to remove the
QT_FORCE_ASSERTS define in their own projects.
[ChangeLog][configure] The -force-asserts option now affects the Qt
build only, not user projects.
Change-Id: Iecca3c9f7e8261996c5d8bcba8adbc0db1dc1c99
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
C4180, C4458 were disabled already in 2012, in commit 6668f5becf.
C4577 was disabled due to QtScript being compiled without exception
support in commit 97d7d80e73.
Anyhow, Qt Script is now officially gone in Qt 6, and Qt headers
do work just fine with C4180. Finally, C4458 is nowadays a W4 warning,
so not enabled in the first place.
Task-number: QTBUG-82615
Change-Id: I2f9b8e858817876b069a166129fbfac7ef3587a0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
When configuring with Qt only with one ABI, certain code paths were
not triggered, which led to a few issues:
- The deployment json file generated by androiddeployqt listed
no architectures.
- The compiled shared library did not have a lib prefix and arch suffix,
which androiddeployqt during the deployment / make apk step.
To fix the architectures missing in the json file, ANDROID_ABIS needs
to be set in android/resolve_config.prf also in the single abi case.
To get the correct file names, android.prf needs to apply the prefixes
and suffixes not only in the build_pass case (multi-abi) but also in
the single abi case (except for config.tests).
The application-binary entry in the json file needs to be without the
extra prefixes and suffixes though, so make a copy of the TARGET value
to be used in the json file, before the name manipulations are
applied.
Pick-to: 5.15
Task-number: QTBUG-85399
Change-Id: Idde92ab7fe883636ccc65a87b91c8a3fc72eefbb
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
QML2_IMPORT_PATH it's usually set by CI to tell the QML apps where to
find the QML components
Change-Id: I57d1cbc3d0fce9be257648268da0a5f9d61d81e9
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
First and foremost the condition was wrong ...
In order to help running qml test cases on Android without any android
specific hack on
user's .pro files we copy the entire project folder to assets. I copy the
entire folder
and not only the tst_*.qml files because it might contain data which is
needed by the tests to run.
Change-Id: I06323d9d52904317410dd2f440de65a0766a48b5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
This amends 0ef46b41d8 to ensure the
new configuration is styled correctly for qmake.
Task-number: QTBUG-80938
Change-Id: Iebfff3ff0570d2e92d01d4eb1178c0d6261468f9
Pick-to: 5.15
Reviewed-by: Lars Schmertmann <lars.schmertmann@governikus.de>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We don't appear to have implicit fallthroughs in our code anymore. The
last deprecated copies and redundant moves are also gone.
The other warning never had an explanation and doesn't show up when
building full Qt anyway.
Change-Id: Iad959315ad374ef288f5fffd15d683599a1a11b9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
As stand-alone executables are not tracked by Launch Services,
which is responsible for applying the low-dpi override at runtime.
Change-Id: Ifac71dfa9b9ffa5ab1302dfca8fa1f5ddd491082
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
gcc doesn't report warnings for final methods since version 9.2:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=78010
Change-Id: I7152351aac0e3bad86d777e119f25137ef97ec6f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
It doesn't understand the arguments we usually pass to testlib.
Change-Id: Iea83d1d8c31a510b2bc442cbfc810eac631322e7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For those who are providing their own launch images for their iOS
projects then QMAKE_IOS_LAUNCH_SCREEN can be set to point to the
location where the launch image to be used over the default.
[ChangeLog][Platform Specific Changes][iOS] Added support for
specifying a launch image to be used for an iOS project. This can be
achieved by using QMAKE_IOS_LAUNCH_SCREEN.
Change-Id: Ibb236655b282132ab5eee747986a93abb9802200
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In Qt5, the -qtlibinfix option did not affect the naming of plugins,
unless -qtlibinfix-plugins was set. This option was added in
5641650993 to offer a way to have -qtlibinfix affect the plugin names
without changing the default behavior. We now remove the
-qtlibinfix-plugins option, as the old behavior is not desirable.
[ChangeLog][configure] The -qtlibinfix option now affects the names of
plugins. The -qtlibinfix-plugins configure option was removed.
Task-number: QTBUG-15192
Fixes: QTBUG-85439
Change-Id: I96f5c2577b76274929c431621967df0e9b4631b7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Apple deprecated the entire OpenGL API in favor of Metal, which
we are aware of, so we don't need to see the warnings when building
Qt.
Instead of applying the silencing globally for all Qt consumers,
both internal and external, we now limit the silencing to Qt itself.
That means user code that explicitly uses any of the deprecated APIs
will see the warnings. Note that this does not apply to merely using
any of the Qt OpenGL APIs. The user has to explicitly use the platform
APIs that have been deprecated.
The warnings need to be disabled on a build system level, so that
that they are passed as -D flags on the command line. If the defines
were done in Qt headers (qguiglobal.h e.g.), they would require the
user to always include this header before any of the Apple headers.
Change-Id: I3f2a2a5211332a059ad4416394251772c677fdcb
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When building qtbase for iOS with CMake, and then trying to mix build
qtsvg with qmake, the value of MODULE_BASE_OUTDIR was wrongly set
to the host prefix because that usually coincides with the target
prefix when doing builds with just qmake.
That is not the case for CMake builds, where the host and target
prefix locations are necessarily different.
This caused syncqt to place the forwarding headers inside the host
prefix location instead of the target prefix location, and thus
compiling qtsvg files failed.
Make sure to use the target install prefix instead of the host one.
Task-number: QTBUG-82581
Task-number: QTBUG-84781
Task-number: QTBUG-85240
Change-Id: I592be0b2799c72c11497c8adc12be13106082cfc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
First of all cmake and qmake used a different standard.
Secondly, the qmake logic enforced lvl 23 (if it was installed which
is the case on the failing machine). When this is combined with
f71a400bf6 which requires lvl 28 API to build, the android build fails to compile.
cmake logic was even worse as it enforced lvl 21 API to be used if installed.
This change requires pick to 5.15 as f71a400bf6 was picked as well.
Pick-to: 5.15
Change-Id: I89a7193b711b8bf927d02907343a49d6f27082ce
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Remove the warning message that was introduced in 84f2792597.
It is triggered for debug_and_release projects that are built against
a single-configuration Qt. Silently fall back to the behavior before
84f2792597 like it always was the case.
Change-Id: I67ed1a145ec5d7a4047b0ce5ad43bf0fc6834d60
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
CMake's default import library extension for MinGW is .dll.a. The code
in qt.prf that resolves the values of the QT variable expected an .a
extension.
To play well with CMake world we keep the the .dll.a extension for
Qt's libraries and teach qt.prf to handle both. In order to do that we
need to check for the existence of the .a or .dll.a file. If none of
these candidates was found we print a warning and fall back to the old
behavior.
Task-number: QTBUG-84781
Change-Id: If394f2d6acd104deb0c3a49240009a1900a506f7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This way the metatypes files are generated even if there are no
metatypes in the module. This is necessary in order to generate empty
QML modules, which in turn is useful if we only want e.g. URL
interceptors in a module, but not types.
Change-Id: Ief949cfebe831b69353a75d0da15ee347995051c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Prefix framework builds of Qt that use the -qtlibinfix had wrong include paths
in qt_lib_XXX.pri files which broke compilation of user projects. We now honor
QT_LIBINFIX in qt_lib_XXX.pri files.
However, due to how framework includes work, module-style includes like
#include <QtCore/qstring.h>
still do not work. Use <qstring.h> or <QString> instead.
Fixes: QTBUG-84219
Pick-to: 5.15
Change-Id: I5314ee810e64cbba6dba06a84064d48bb4ff3377
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Override request for debug info during compiler 'test',
otherwise call to dsymutil will fail call with /dev/null.
Use case here is to pass for example -glldb with CXXFLAGS.
Fixes: QTBUG-62953
Fixes: QTBUG-84467
Pick-to: 5.15
Change-Id: Ief8f987afb40d0b90da732195d67d476e7bb3aff
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This marks the end of EGL and OpenGL ES support on Windows.
The concepts of -opengl dynamic, -opengl desktop, QT_OPENGL=software,
etc. remain unchanged, with the exception of the disapperance of
everything ANGLE related.
CMake builds now work identically to qmake on Windows: they default to
'dynamic' OpenGL on Windows, unless -DINPUT_opengl=desktop is specified.
On Windows, Qt 6 is expected to default to the "dynamic" OpenGL model by
default, just like Qt 5.15. This can be changed by switching to "desktop"
OpenGL, which will link to opengl32 (publicly, so other libs and applications
will do so as well) and disallows using another OpenGL DLL.
The "dynamic" mode is essential still because the fallback to a software
rasterizer, such as the opengl32sw.dll we ship with the Qt packages,
has to to work exactly like in Qt 5, the removal of ANGLE does not
change this concept in any way (except of course that the middle option
of using ANGLE is now gone)
When it comes to the windows plugin's OpenGL blacklist feature, it works
like before and accepts the ANGLE/D3D related keywords. They will
then be ignored. Similarly, requesting QT_OPENGL=angle is ignored (but
will show a warning).
The D3D11 and DXGI configure time tests are removed: Qt 5.14 already
depends on D3D 11.1 and DXGI 1.3 headers being available unconditionally
on Win32 (in QRhi's D3D11 backend). No need to test for these.
[ChangeLog][Windows] ANGLE is no longer included with Qt. Dynamic OpenGL
builds work like before but ANGLE is no longer an option. OpenGL proper
or an alternative opengl32 implementation are the two remaining options
now. Attempting to set QT_OPENGL=angle or Qt::AA_UseOpenGLES will have
no effect on Windows.
Fixes: QTBUG-79103
Change-Id: Ia404e0d07f3fe191b27434d863c81180112ecb3b
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
If user's specified to build without examples we shouldn't silently
overwrite this. This might mean that some tests will fail to run then,
though.
Fixes: QTBUG-84087
Pick-to: 5.15
Change-Id: I53748fc03354ffdf015f85c93efc6e86c446adb8
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Instead of writing the hard-coded sysroot into the .cmake file, write
the variable ${CMAKE_SYSROOT}. This makes it possible to relocate the
build to a machine where the sysroot is different from the build
machine.
Fixes: QTBUG-83335
Change-Id: Iaa69feb9a140b050f6b5547929cc940ee0f039ce
Reviewed-by: Rolf Eike Beer <eb@emlix.com>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We now assume that source code is encoded in UTF-8 by default on
all platforms (and verify this with an auto test). Provide
a CONFIG+=no_utf8_source option for backwards compatibility.
[ChangeLog][qmake] qmake will tell the compiler that source code is
encoded in utf-8 by default. This mainly has an effect on Windows, where
MSVC still assumes source code is encoded in the current ANSI code page.
Use CONFIG+=no_utf8_source to get back the Qt 5 behavior.
Change-Id: I6dcafcaeefdea7d3907ccb723aeb7d23ccc0f04f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit c9d9ac5bb0.
This breaks prefix build which tries to link to install folder.
Task-number: QTBUG-83967
Change-Id: I084152afde91c2063154bef8ac99d7e997c9394b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
