QShaderGenerator didn't handle substitutions like
`vec4 $color = mix($color1, $color2, $fac);`
Note that `$color` is a prefix to `$color1` and `$color2`. For the
substitution `QByteArray::replace` was used so if `$color` was handled
first and replaced by `v1`, `$color1` and `$color2` were never correctly
replaced and instead became `v11` and `v12` which caused a crash later
on.
Change-Id: Idaf800fdac468f33c323eb722701da5f8eb918d6
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
For graphs like this one:
Input ----> Function1 ----> Output
\
---> Function2
(unbound output)
We would have generated only 2 statements, for Function1 and Output.
This change fixes this by treating Function2 like an output.
Therefore it generates 4 statements: Input, Function1, Output and
Function2.
Change-Id: Iaada40b9b949d771806dd47efad4f7ef2a775b48
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
QUtf32::convertToUnicode() was forgetting to set headerdone when it
dealt with the header (for contrast, Utf16::convertToUnicode() does).
Fixes: QTBUG-62011
Change-Id: Ia254782ce0967a6cf9ce0e81eb06d41521150eed
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Apple changed on macOS 10.14 (Mojave). Windows has always allowed.
Fixes: QTBUG-81905
Change-Id: I572733186b73423b89e5fffd15f12fee3f03c055
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The comment in QNativeSocketEnginePrivate::fetchConnectionParameters()
talked about IPv6 v4-mapped addresses. However, toIPv4Address also
converts the unspecified address (::), which resulted in QAbstractSocket
saying that it had bound to QHostAddress::Any instead of
QHostAddress::AnyV6
Change-Id: I572733186b73423b89e5fffd15f138579c5c0c50
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
There were a few surprises:
- QByteArray::compare() are missing noexcept (will add)
- ibid., called with non-ascii content and CaseInsensitive fails
(this was discussed on the ML, with tentative agreement that
it's a feature, not a bug; waiting for QUtf8String(View) for a
fix, then).
- As was the case when we did this exercise with the relational
operators, QString(Ref)/QChar is not noexcept (will fix)
These have been QEXPECT_FAIL'ed.
Not much of the cartesian product is implemented at all, yet. These
have been #ifdef'ed with NOT_YET_IMPLEMENTED to see what's still
missing.
Change-Id: I7d9b21e292b98f980aacdc6248e88188f7472ba2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The font change in QComboBox might cause incorrect appearance of popup
menu since it doesn't notify popup menu to relayout itself
Fixes the issue by send font change event to the item view of popup
menu when received a font change event in QComboBox
Fixes: QTBUG-75846
Change-Id: I4821015cca95a7e233a22262596a6fbf27f10aef
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Those types are used as properties of Q(Date)TimeEdit,
QKeySequenceEdit.
Fixes: PYSIDE-1215
Change-Id: I8b9ffebb8229fff447aa7dd6bee6e037d708333c
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
This way we produce valid xml also for the no-proxy case.
Change-Id: I5a277255d22c3814fe463c0cd013c04ddc6ad919
Reviewed-by: André Hartmann <aha_1980@gmx.de>
When QWidget is being destroyed, its winId is cleared, and
a QEvent::WinIdChange is sent. If a listener of this event
reacted by calling winId() again, we might crash.
A crash can be observed when this child widget is destroyed in dtor of its parent.
E.g. here is a hierarchy of widgets:
1:QWidget
2:QObject
3:QWidget
4:QWidget
If a listener subscribed for WinIdChange events from (4),
and there is a connection to destroy (4) when (2) is destroyed.
This will lead to infinite loop:
1. QWidget::~QWidget
2. QWidget::destroy
3. QWidgetPrivate::setWinId(0)
4. QCoreApplication::sendEvent(q, QEvent::WinIdChange);
5. eventFilter
6. QWidget::winId
7. QWidgetPrivate::createWinId (this=0x555555957600) at kernel/qwidget.cpp:2380
8. QWidgetPrivate::createWinId (this=0x55555596b040) at kernel/qwidget.cpp:2387
9. QWidget::create (this=0x5555558f2010, window=0, initializeWindow=true, destroyOldWindow=true) at kernel/qwidget.cpp:1163
10. QWidgetPrivate::createWinId (this=0x55555596b040) at kernel/qwidget.cpp:2387
11. QWidget::create (this=0x5555558f2010, window=0, initializeWindow=true, destroyOldWindow=true) at kernel/qwidget.cpp:1163
12. QWidgetPrivate::createWinId (this=0x55555596b040) at kernel/qwidget.cpp:2387
Fixes: QTBUG-81849
Change-Id: Ib4c33ac97d9a79c701431ae107bddfb22720ba0d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Back-ends need to catch NULL data so as not to call system APIs with
invalid pointers.
[ChangeLog][QtCore][QCollator] Fixed a regression introduced in 5.14.0
that caused QCollator not to operate with default-constructed QStrings
and print a warning on Windows.
Fixes: QTBUG-81673
Change-Id: I2eafe1e188b436afcca3cf2ecdf98bba707c44c9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On macOS it's possible to configure the system locale to not do digit
grouping (separating "thousands", in most western locales); it then
returns an empty string when asked for the grouping character, which
QLocale's system-configuration then ignored, falling back on using the
base UI locale's grouping separator. This could lead to the same
separator being used for decimal and grouping, which should never
happen, least of all when configured to not group at all.
In order to notice when this happens, query() must take care to return
an empty QString (as a QVariant, which is then non-null) when it *has*
a value for the locale property, and that value is empty, as opposed
to a null QVariant when it doesn't find a configured value. The caller
can then distinguish the two cases.
Furthermore, the group and decimal separators need to be distinct, so
we need to take care to avoid cases where the system overrides one
with what the CLDR has given for the other and doesn't over-ride that
other.
Only presently implemented for macOS and MS-Win, since the (other)
Unix implementation of the system locale returns single QChar values
for the numeric tokens - see QTBUG-69324, QTBUG-81053.
Fixes: QTBUG-80459
Change-Id: Ic3fbb0fb86e974604a60781378b09abc13bab15d
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The "title" in markdown is the tooltip, not the name attribute of
a link. Also, tell the char format that it's an anchor.
Change-Id: I2978848ec6705fe16376d6fe17f31007cce4b801
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
These tests fail locally, and have been reported to
fail on the CI system.
Change-Id: Ia76bb15c288af4171ebe47b3c30f3651a63df3f2
Task-number: QTBUG-75786
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
If a widget inside a QGPW has a proxy focus, the code would keep
sending focus in events to the proxy even if the proxy was already
focused. Amend the check in place to prevent this from happening.
Change-Id: Id28d3bfe4f396da5c9477df713441ca7d506662f
Fixes: QTBUG-51856
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When the tested widget has a focus proxy, then we should check if the
current focus widget is not the same as that focus proxy before setting
it to be the widget that gets focus. This ensures that when back-tabbing
from a widget like QDoubleSpinBox that it will not get stuck inside that
widget and will back-tab to the next correct one.
Fixes: QTBUG-81097
Change-Id: I3f689c7715da7f3ce8c3d2f616041528f5778a2f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
There's no point at keep raising errors after encountering the
first malformed attribute.
Change-Id: Idb37e577ea96c3bd850b3caf008fe3ecd57dd32e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We don't know which versions these blacklistings actually apply on
unless we actually get macOS 10.14 and 10.15 into the CI and running
tests, so let's start with that, and then granularize the blacklists
after that.
Task-number: QTBUG-75786
Change-Id: Id79642afa50cb20efa2cd209286b6933918d3a4a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
They overlapped and the latter had duplicated code, so make them into
a single data-driven test. At the same time, replace the '-' at the
start of the expected string with QLocale::negativeSign(), since the
test fails otherwise when LC_NUMERIC=nb_NO on Linux (Debian/testing).
Change-Id: I051c75abff16b2e6f8278fcb152b6bde14c71f9a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test expects a very explicit list of events during show, but on
macOS we also get an InputMethodQuery event as a result of the window
becoming active. The test needs to be written significantly to support
these kind of platform differences.
Change-Id: I395c1e9e4e9baf7d9f88f0d067586fc15afb9a16
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
For some reason the firstChild gets the focus when clearing the focus.
This seems to be timing dependent, as removing the 30ms qWait 'fixes'
the issue. So does a processEvent call before minimzing. Both of these
require further investigation.
Change-Id: I62833a5541712f97dc24bc63384fa4c051096537
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
There's a timing issue that affects the position of the vertical
scrollbar when scrolling by pixels.
Change-Id: I29d73574785be539a5870b498a902b1aba887e9c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It's not clear why this is failing, but we need to blacklist it so that
we can move over to testing macOS 10.14 and 10.15 in the CI.
Task-number: QTBUG-75786
Change-Id: I208d5af92406c5da8d0210e0188568466b78b2a9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The combobox popup can overlap a little with the button, and that's the
expected behavior.
Change-Id: I245bfce85cb5ee661ceb51dbe0d844492878a2bc
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We were being inconsistent in how we handled this, some tests skipping
while others using QVERIFY. It makes more sense to skip the tests, since
the problem is a missing pre-condition of the test, not the test itself
being bad or exposing real failures in the implementation.
Change-Id: I20eacfe12dbce0b0d926e48cbe2d2772819fa4a5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
An empty QTextDocument already contains a block; so when the formatting
is fully determined, if the document is still empty, then instead of
inserting a new block, we can set formatting on the cursor, which
affects the pre-existing block, before inserting text. This avoids
leaving a blank line (the default block) above the inserted content.
Fixes: QTBUG-81060
Change-Id: I14e45e300a602493aa59680417d74d4c2b25862d
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Use QStringIterator rather than indexed loops. This fixes handling of
non-BMP code points (which may be lower or uppercase, see the test).
Change also the semantics of the functions, adopting Unicode §3.13
definitions: a string is lowercase/uppercase if it's equal to its
own toLower/toUpper folding.
As a side effect, empty strings are now correctly reported to be
lowercase AND uppercase.
[ChangeLog][Important Behavior Changes] The semantics of
QString::isLower() and QString::isUpper() have been changed to match the
Unicode specification. Now lowercase (resp. uppercase) strings are
allowed to contain any character; a string is considered lowercase
(resp. uppercase) if it's equal to its own toLower() (resp. toUpper())
folding. Previously, a non-letter character would make the string not
lowercase nor uppercase, and the mere presence of an uppercase (resp.
lowercase) letter would make isLower() (resp. isUpper()) return false,
even if the letter wouldn't change under case folding. As a
consequence, now empty strings are lowercase and uppercase.
[ChangeLog][QtCore][QString] Fixed a number of bugs of
QString::isLower() and QString::isUpper(). Empty strings are now
correctly reported to be lowercase (resp. uppercase), and strings
containing code points outside the BMP are now correctly handled.
Note that the behavior of these functions has also been changed.
Change-Id: Iba1398279a072399a9f21295fe75f6e414f3f813
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The windows filesystemwatcher did not watch for attribute changes for
directories (e.g. hidden flag) so it was not in sync with other
backends. Fix it by adding FILE_NOTIFY_CHANGE_ATTRIBUTES to the watch
flags when watching a directory.
[ChangeLog][QtCore][QFileSystemWatcher] Fixed a bug that caused QFSW not
to watch for attribute changes on Windows. Now it will correctly report
when files and directories become hidden or unhidden, for example.
Fixes: QTBUG-80545
Change-Id: I31767a0da899963e3940b4f5b36d1d581e6aa57c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The actual logging code, qt_message_print(), uses toLocal8Bit(), so
testing by comaring with toUtf8() isn't robust.
Change-Id: I7d6614e4af8c679674dbbf4ff47a88b2b75fc2dc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix tst_QNoDebug::streaming() to use toLocal8Bit(), to match
QTestLog::ignoreMessage(), which uses fromLocal8Bit().
Change-Id: I65f7b995a582aeab7b7ba61781a229fecd1ed3c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure <david.faure@kdab.com>
... in docs, comments, and warnings. Also adopt
some occurrences around there and in the snippets.
Change-Id: Icc0aa0868cadd8ec2270dda794bf83cd7ab84160
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Previously, there was only a Python compile test which triggers
only when PySide2 is found. Rename it to pythonCompile().
Extend the TestEntry structure by adding the base line file
and flags, which represent all special cases found in the code.
Check for the presence of a Python base line file in addition
to the C++ one.
Prototypically add one form. Further forms can be added
on the go.
Task-number: PYSIDE-797
Change-Id: Ic2983fa3cab2399a6809e244f93c663e0212f675
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
This amends a1f4321bbb as the font
families should take precedence over the font family set. If the font
family is already included in the families then it should keep its
placement. Otherwise it should be appended.
Task-number: QTBUG-80475
Change-Id: I0049189c88b6879e57619815ec780960e9c0a300
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
If a type has both a converter to QVariantList and to
QSequentialIterableImpl registered, we would have chosen the
QSequentialIterableImpl version. In the case of types like QJSValue,
this is more costly. With this change we therefore uses the direct
conversion if it has been registered.
The same applies to QAssociativeIterableImpl and
QVariantHash/QVariantMap.
Change-Id: I9c0b5068efe4bfbc5e0598a200e6db59201e9974
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
If the singular fontFamily() is given, then this is obviously the one to
be preferred over any plural fontFamilies(). Make sure it always ends up
first in the list of emitted font families.
Change-Id: I1e3b1ba29721c8298b1a0d4a1e1da49ba5b4e7ac
Fixes: QTBUG-80475
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Every Qt::CursorShape is supported.
Tested in Chrome, Firefox and Safari.
Change-Id: I38c9024dba4af70af789ac84ad7e38f749c847d7
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
When QLocale::Country is set to QLocale::India numbers are written so that
after first three from the right and then after every second will be comma.
E.g. 10000000 is written as 1,00,00,000
Task-number: QTBUG-24301
Change-Id: Ic06241c127b0af1824104f94f7e2ce6e2058a070
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
