QHeaderViewPrivate reimplemented _q_layoutChanged() to handle changes
of rows/columns via layoutChanged/layoutAboutToBeChanged. This worked
fine for Qt4 but since Qt5 only the special signals rowsAboutToBeMoved/
rowsMoved are used for this (8021e2d5e7).
With this change, QAbstractItemViewPrivate::_q_rows/columnsMoved() is
calling the virtual function _q_layoutChanged(). This resulted in a
wrong call of QHP::_q_layoutChanged() for a horizontal header when
a row changed and for a vertical header during a column change. In the
end this can lead to an unhide of hidden sections.
Task-number: QTBUG-54610
Change-Id: Ide4bfc5b24a97746fd1e5af82d3ba08257149157
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QHeaderViewPrivate::_q_layoutChanged() was not called when used in a
QTreeView because it was explicitly disconnected in setModel().
The disconnect was added sometime prio to Qt 4.3, but there the signal
was connected to the doItemsLayout() slot. This was correct since
QTreeView::doItemsLayout() is calling header->doItemsLayout().
In Qt 4.3.0 _q_layoutChanged() was introduced and the disconnect was
adjusted. But since _q_layoutChanged() is doing much more than
doItemsLayout() (e.g. restoring hidden sections), functionality was
lost. The problem was already observed for Qt 4.6 (QTBUG-18196) but
only partially fixed.
Task-number: QTBUG-41124
Task-number: QTBUG-54610
Change-Id: Id13a9930d0163812e12a0287016bab9c3aa02068
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Autotest is taken from the previously reverted
8b1377fde1.
Task-number: QTBUG-60231
Change-Id: I44dd79cba22b6baefdd6d95c176790bef0b7eafe
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
QFontMetrics(F)::width() has been deprecated and is replaced by
horizontalAdvance(). This updates all usage of it in tests and
documentation.
It is worth noting that many or most of the usages of
QFontMetrics::width() probably intended to use boundingRect().width(),
but since it currently works, I have not looked into that, just
replaced the function name mechanically.
Change-Id: Iec382e5bad0b50f37a6cfff841bfb46ed4d4555f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use being()/end() instead.
These were the last remaining uses of QRegion::rects() within qtbase.
Change-Id: I264beb6f660968f40eecbbee2260341fca94ddb5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Drop the useless copy 'r' of 'region', reuse 'r' for the rects in 'region',
to clean up the region handling in verifyColor().
Change-Id: I8e159976b4b0152823be864488d2ef25d7cb0078
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The test is flaky on Linux.
Task-number: QTBUG-64639
Change-Id: Iec56ebce4f656f52187b34c8f655b137e41c3d17
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
QAbstractItemDelegatePrivate::textForRole() was formatting date and
time separately, then gluing the parts back together with space.
QLocale can do that just fine itself (it has a toString() overload
that handles a QDateTime) and might even (some day) do it better. To
my mild surprise, this proved sufficient to fix a problem with
date-time display in tool-tips, when the date-time includes a zone.
Extracted the date-time part of an existing selftest into a test of
its own and extended it to test times of each spec-type; verified that
the non-local spec cases of this all failed before this fix.
Task-number: QTBUG-61069
Change-Id: I6d6be0c27be9a557d8afc3ced200a10b2aaff816
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Test-case taken from bug-report; fits in as an easy row in an existing
data-driven test. Add similar tests for date-time and time; and an
isValid test on the end of year 9999. The date-time parser was using
the end of year 7999 as maximum value for dates and date-times; extend
this to year 9999, as I can see no reason not to.
[ChangeLog][QtCore][QDateTime] Years up to 9999 can now be parsed
without error (previously 8000 and beyond were treated as invalid) in
all formats (not only in ISO format). Widgets handling dates now
support dates to 9999, likewise.
Task-number: QTBUG-64401
Change-Id: I518cfa6c2cb4ecc5a85b896dc9e56b4fdd8a8bb1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTreeWidgetItem::insertChildren should behave like a more-optimized
QTreeWidgetItem::insertChild. Unlike the latter, the former lacks
out-of-bounds checks, resulting in successful insertions even
when using an invalid index (say, bigger than the row/column count).
Reintroduce some sanity checks instead. This allows to fix a "fixme"
left in the autotest.
[ChangeLog][QtWidgets][QTreeWidgetItem] QTreeWidgetItem::insertChildren
now ignores insertions happening at invalid indices, for
consistency with QTreeWidgetItem::insertChild.
Change-Id: I1532597768cc6aff96a6e8f356bc6075b582801d
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
The tests start to show flakyness on Linux in 5.10 (rowCount() check
failing). This seems to point to a race condition between the files
showing up and the file system watchers of QFileSystemModel starting.
To fix this, close the file and wait until it shows up in the directory
before pointing the QFileSystemModel to it. The tests then no longer
rely on the file system watchers.
Change-Id: I39cffb4cacf6843e8e4180efb405345307c78dd8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
A layoutChange indicates that anything can have moved to anywhere else,
including as a result purely of new items being added. It can also
indicate that items are removed.
The old code here incorrectly assumed that the section count remained
constant over this operation by setting the size of the oldSectionHidden
QBitArray - whose size is the size before the layoutChange operation -
and then calling setBit with model rows numbered after the layoutChange
operation. As the two are not necessarily the same dimensions, this can
result in asserts from the setBit call.
Simplify the handling of layoutChanged entirely by clearing section
information, and using the QPersistentIndexes which indicate hidden
state to restore that state after re-population.
Task-number: QTBUG-53221
Change-Id: I3cda13e86b51b3029b37b647a48748fb604db252
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Since the first item in a treeview might be hidden, start from the
first visible item in the view when starting or wrapping round
during a keyboard search.
Task-number: QTBUG-63869
Change-Id: I202bea567c6d4484c3ffaf8a5f9af8ea2e13708d
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
When calling QTreeView::hideColumn() the row heights are not
recalculated. This can lead to rows which are unnecessarily high due to
hidden columns may contain large (e.g. multiline) content. The same
applies to showColumn() - there the row might be to small.
Hiding columns directly via QTreeView::header()->hideSection() is not
covered by this patch since QHeaderView has no way to inform about
newly shown/hidden sections.
Task-number: QTBUG-8376
Change-Id: I20b1198e56e403ab8cf649af76e5e2280821dd68
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Also blacklist tst_QNetworkReply::ioHttpRedirectErrors(too-many-redirects)
on RHEL 6.6 in CI.
Conflicts:
tests/auto/network/access/qnetworkreply/BLACKLIST
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Task-number: QTBUG-64569
Change-Id: I7514fc0660c18fd3a3e1d0d0af3f15d879e3c6f4
As it stood, we would set 'pressed' to false regardless of which button that
was released. This would end up wrong if pressing the left button, and
at the same time, did a click with the right button. This would clear the
flag prematurely, and cause a release signal not to be emitted when later
releasing the left button.
tst_QAbstractButton: adding autotest
Adding tests to simulate the bug report's cases:
1) left press button
2) click right/middle key
3) move mouse out of button's boundary
4) test if the released() signal triggered properly
Taks-number: QTBUG-53244
Change-Id: Ifc0d5f52a917ac9cd2df5e86c0475abcda47e425
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
on Ubuntu_16_04 and openSUSE_42_3.
Task-number: QTBUG-64446
Change-Id: If8fff2823f041428852822470a2f00157795558b
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Resizing a QTreeeView section with double click or
resizeColumnToContents() does not respect the maximumSectionSize when
the resize mode is Interactive or Fixed. Since the documentation of
maximumSectionSize states that it should honor this property for those
cases either the documentation or implementation is incorrect.
This patch fixes the latter.
Task-number: QTBUG-64036
Change-Id: Ic14c8e444d50b9c50a117efed19d0bca7ec1cf82
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The test showed flakyness on Linux. It has been observed that its
windows overlap. Position the windows beside each other.
Change-Id: I4ff1b9cafaf753a6844b3dfabb576a07f74b396a
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
ultrix and reliant have not seen a release since 1995. dgux not since
2001. bsdi not since 2003. irix not since 2006. osf not since 2010.
dynix... unclear, but no later than 2002. symbian needs no mention.
All considered obsolete, all gone.
sco and unixware are effectively obsolete. Remove them until someone
expresses a real need.
Change-Id: Ia3d9d370016adce9213ae5ad0ef965ef8de2a3ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... by moving them in QTestPrivate namespace (qtesthelpers_p.h). This
header file is a convenient staging area for helper APIs, eventually
some could be moved to public QTest API.
This header file utilizes the same pattern as other qtestlib header
files - wrapping functions with QT_${LIBNAME}_LIB to automatically
enable certain APIs based on what is in the projects dependencies,
e.g. QT += widgets.
Change-Id: Ic0266429939c1f3788912ad8b84fc6e0d5edd68b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test is flaky on Unity due to regression introduced by QTBUG-39362.
Skip the test functions until QTBUG-39362 is resolved.
These test functions do not fail on Gnome and KDE, so the functionality
tested by check_cursorKeys* will be covered by other linux distributions
in CI.
Change-Id: Ifd1a7779a9728142424f4956dd6466c822ccde91
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
If a window is blocked by a WindowModal dialog, it should not be
possible to trigger window shortcuts on that window if it receives
a WindowActivate event.
This currently happens if the blocked window gets clicked, because the
window becomes the active_window and then QApplication sends it a
WindowActivate event (this doesn't happen with application modal dialogs).
The correctWidgetContext() function calls QApplicationPrivate::tryModalHelper()
only if the shortcut context is ApplicationShortcut. This patch makes it
call even if the shortcut context is WindowShortcut.
Change-Id: Iff87d85bcae603a6a24128e0cedfa9d33b6485fd
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Make the function brace policy consistent.
Change-Id: Iaf1f05a63958f19927e9b1953da06f99a4eba644
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Add some helpers to convert the coordinates and change the code to use the
QWindow-based mouse test API. Remove mouse presses on the second and third menu
from task256322_highlight() since moving the mouse is sufficient to switch
menus.
Remove blacklisting/skipping of macOS and offscreen.
Task-number: QTBUG-63988
Change-Id: If3e94170d11df369aec199d13d54d39382a78723
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
tst_noqteventloop.cpp 'event' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'canFetchMore' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'fetchMore' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'hasChildren' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'rowCount' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'columnCount' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'index' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'parent' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'data' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'begin' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'end' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'updateState' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'drawPixmap' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'type' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
Change-Id: I2a0c5da15994619383c1f90fee311927e58d7af0
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
... the same way other tests do in this file.
Change-Id: Ifcaee084bd20c55d6b9f7ddcf35daebce2a02e07
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Currently on Windows, the Next button's shortcut doesn't work, because
QWizard overrides it with an empty key sequence.
The key sequence should be changed only if isVistaThemeEnabled() returns
true.
Task-number: QTBUG-46894
Change-Id: I54f26388b167973cc8065a867d9e771c1e6a2a72
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
QAction::setData() always emits changed() even without actual data change.
Original code lacks a guard to check if the data changes.
According to http://doc.qt.io/qt-4.8/signalsandslots.html,
adding guard also benefits to prevent infinite looping in case
of cyclic connections.
Task-number: QTBUG-62006
Change-Id: I776369b668082f9f02e4502a36b1ae234ee7e079
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Tests should not use QCursor to emulate mouse move, see QCursor::setPos() docs.
The flakiness of the test on XCB is not surprising when the test queries geometry
even before the window has been shown. With the re-factored version I could not
reproduce flakiness anymore.
Removed Q_OS_MAC and closed QTBUG-26274 as test passes on macOS from which I
assume that the underlying issue has been fixed.
Removed Q_OS_QNX ifdef as test does not rely on QCursor anymore.
This patch also fixes the issues on minimal / offscreen platform plugins.
QCursor::setPos() is evil for auto test purposes.
Note:
We intentionally use QTest::mouseMove(QWindow *window, ..), not the QWidget overload.
The QWindow version gets routed through QWSI, which ensures that all necessary events
are generated as expect. In QWidget code path this is currently disabled by
QTEST_QPA_MOUSE_HANDLING.
Change-Id: I285c26cff09e3f2750f8c2abbb1f46c8f7be984a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 1af927976a)
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
On macOS, absence of a QPA menu means that we should be using our
own internal logic since there's no entity on the QCocoaMenuDelegate
to take care of the shortcuts.
Change-Id: I35ed8f0b55445f61d0528709d4debb636a502002
Task-number: QTBUG-61039
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Unique begins with a "y" sound, hence a unique is correct.
Change-Id: I9eb6b4d4c9ddab45af931e97c041c24edf163eca
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The autotest has been blacklisted for RHEL 7.1 and RHEL 7.2 earlier already
and it is still failing in 7.4.
Task-number: QTBUG-46116
Change-Id: I0f33be849513a2debaf8c093dcd413fa09b5c681
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
The qWaitFor functions themselves can not trigger a test failure, as that
will not result in the test function exiting early, so every single call
to qWaitFor needs to be wrapped in a QVERIFY.
Change-Id: Id15a1549f31d06cdbf788e1d84ea431c28636ec8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We can't qWaitForWindowExposed on native menu bars. Other test
functions in this file are already disabling the native manu bar.
Task-number: QTBUG-24326
Change-Id: Iecf907ca84589159417d0d942c911485a41af164
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
A "compound widget" is a widget that has a focus proxy set to an inner
child. This is normal for complex black-box components where focus handling
is delegated to the children. Since the compound can have several
children, a local tab order might exist between them.
The current implementation of setTabOrder had no idea about
compound widgets. As such, when connecting two compounds in the
tab chain, it would just break up their inner tab order and
cause tabbing to ignore children other than the proxy.
The new implementation recognizes compound widgets, and add some
extra code to figure out the correct tab targets. This way, the
local tab order between the children will be preserved.
This implementation was inspired by the patches of Marek Wieckowski posted
in the linked bug report, and later modified by Nikita Krupenko.
[ChangeLog][Widgets] QWidget::setTabOrder() will now preserve the local
tab order inside a widget if it has a focus proxy set to an inner child.
Task-number: QTBUG-10907
Change-Id: I0673d39d70ec8c6bf64af30bf978d67c651b2f3c
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
QWindowContainer assumed that a widget could never change from
native to non-native. This is not a fact when the window container
is reparented to toplevel and back. In this case, usesNativeWidgets
would be stuck at true, and parentWasChanged() would go down the
native widget path, triggering an assert.
The solution is to always recalculate the usesNativeWidgets bool.
Task-number: QTBUG-63168
Change-Id: I88178259878ace9eb5de2ee45ff5e69b170da71c
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
By the time we call setKeyboardMode(true), the menu may
already have taken focus. This change sets keyboardFocusWidget
before opening the popup, and makes sure that keyboardFocusWidget
is not set to the popup. (We cannot remove the assignment from
setKeyboardMode(), since it's called from several places.)
[ChangeLog][QtWidgets] Fixed widget losing focus after showing
menu second time.
Task-number: QTBUG-56860
Change-Id: Ic01726bf694e6f365dd7b601ad555156e0fdf6c5
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When tabbing/searching for the next focus widget, the current
code would check if the next widget in the focus chain
had a focus proxy, and if so, ignore it. The exact reason
for this behavior is not clearly understood, but some widgets
(e.g QSpinBox) has children (a QLineEdit) that sets the parent
as focus proxy. If we didn't ignore children with focus proxy, tabbing
from a QSpinBox would lead us to find the inner QLineEdit, which
(because of its proxy), would lead us back to the QSpinBox. And
therefore not be able to tab out.
But ignoring the focus proxy has other problems. Normally a focus
proxy is the next sibling to the widget it acts as a proxy for, and
tabbing to the widget will therefore appear correct. But if the
focus proxy is not the next sibling, the logic will fail, since
the tab would anyway give focus to the next sibling. This becomes very
apparent if the focus proxy is a child of the widget, since then
its likely that the focus proxy is not the _first_ child among all
the children. So tabbing to the parent would not give focus to
the proxy.
This patch will change this logic so that you are allowed to tab to a
widget with a focus proxy. But we check that if you do so, you actually
end up moving focus in the right direction. If not, we ignore it like
before. This will ensure that we tab correctly when dealing with focus
proxies, and especially when focus proxies are used to construct
compound widgets.
[ChangeLog][Widgets] When tabbing to a widget with focus proxy, focus
will now be given to the proxy rather than just being ignored.
Task-number: QTBUG-10907
Change-Id: I66d1da5c941fdd984bb2783cc355ca65b553b5dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Due to the complex event forwarding logic between QCompleter,
QComboBox, QLineEdit and QWidgetLineControl, in some cases the
same single user return key press could result in duplicated
activated() signals being emitted by QComboBox. The first one
would be emitted because QLineEdit emitted editingFinished()
as a result of QCompleter::eventFilter() having forwarded the
return key press event to QComboBox. The second one, would
happen right after, as QCompleter::eventFilter() would process
the same event on behalf of its popup.
(We recall that QCompleter is installed as its own popup event
filter. That's also the case for the completer's widget, although
the purpose there is limited to focus-out events).
The current fix consists on skipping the emit as a result of
QLineEdit::editingFinished() if the completer's popup is still
active. For this to be accurate, it helps to test whether the
completer's popup is visible, so we will not be hiding it in
QWidgetLineControl::processKeyEvent() anymore. Indeed, we know
that if the popup is visible, that means that processKeyEvent()
was called after being forwarded by the completer's popup event
filter. Furthermore, the popup will be hidden by its event filter
shortly after it returns from said event forwarding call.
Based on a patch by Alexey Chernov <4ernov@gmail.com>.
Task-number: QTBUG-51858
Task-number: QTBUG-51889
Change-Id: I013f6c3000ae37b5b0ec20eaf5cf7746c9c903e3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This autotest is blacklisted as it is deemed flaky.
Task-number: QTBUG-63262
Change-Id: I216985e81d1c1cb3528fd8a005be48cad2a31ab7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This autotest is blacklisted as it is deemed flaky.
Task-number: QTBUG-63260
Change-Id: I3e83bcb0dbbe4fbf9d5c16f764fbeeca2b52d10c
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
When focus is put back onto an itemview and the current item is editable
then the WA_InputMethodEnabled attribute should be set. Likewise this
should be set/unset when the current index changes too, depending on
whether the index is editable or not.
Change-Id: Iaea075e669efd21bdaa89a49c500c449272d098b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When scrolling to the bottom of the view, if there are expanded items
then it should call canFetchMore/fetchMore up the chain until it
finds one with more items that can possibly be retrieved.
This brings it in line with the QAbstractItemView implementation
which would call canFetchMore on the root index, therefore we
go up the chain to the root to see if anything before that can be fetched.
[ChangeLog][QtWidgets][QTreeView] QTreeView now calls canFetchMore and
fetchMore when the bottom of the QTreeView is scrolled to.
Task-number: QTBUG-48725
Change-Id: I2b2145684bb34c8c317bfce4a0ef14f243a64719
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Tests should not use QCursor to emulate mouse move, see QCursor::setPos() docs.
The flakiness of the test on XCB is not surprising when the test queries geometry
even before the window has been shown. With the re-factored version I could not
reproduce flakiness anymore.
Removed Q_OS_MAC and closed QTBUG-26274 as test passes on macOS from which I
assume that the underlying issue has been fixed.
Removed Q_OS_QNX ifdef as test does not rely on QCursor anymore.
This patch also fixes the issues on minimal / offscreen platform plugins.
QCursor::setPos() is evil for auto test purposes.
Note:
We intentionally use QTest::mouseMove(QWindow *window, ..), not the QWidget overload.
The QWindow version gets routed through QWSI, which ensures that all necessary events
are generated as expect. In QWidget code path this is currently disabled by
QTEST_QPA_MOUSE_HANDLING.
Change-Id: I285c26cff09e3f2750f8c2abbb1f46c8f7be984a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Speeds up the test from approximately 770ms to 180ms.
Change-Id: I2e5479fd5190b841b44d4a66380d27b1c3b55162
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
This reverts commit 8561281768.
This change needs to be reverted because Windows 10 Creator's
Update doesn't fail on this test anymore during CI runs.
Reason for this is unknown.
Change-Id: Ice250ecedb14ac96fb3693b2d9884ef452a91cc2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This reverts commit 3d5bf00f18.
This change needs to be reverted because Windows 10 Creator's
Update doesn't fail on this test anymore during CI runs.
Reason for this is unknown.
Change-Id: I9f1c88606c97afc5952af34e04310612b783a9c2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
When calling resize() from showEvent(), we'd set the full geometry
on the widget's QWindow. This resulted in the top-level window
being moved to the top-left corner, even though no other call to
move() or setGeometry() had happened before.
The solution consists on calling the proper QWindow methods depending
on whether setGeometry_sys() is called for a move, a resize or both.
Furthermore, this needs QWindow::resize() to set its position policy
to frame-exclusive. The documentation states that is already the case
and we're setting the full geometry on the platform window, so we need
to convey that bit of information.
This also solves the age-old conundrum: "### why do we have isMove as
a parameter?"
Change-Id: I2e00fd632929ade14b35ae5e6495ed1ab176d32f
Task-number: QTBUG-56277
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Has become flaky on CI. Does not fail locally.
Change-Id: I42938849571938db78b16a72c215442a69f7c2d5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QLineEdit with a mask does not return empty fields with the
ImSurroundingText query. This is a problem for the input
context that is not aware of the mask and relies on the
fact that the cursor position never exceeds the boundaries
of the surrounding text.
This change fixes the issue by returning unmasked text with
the ImSurroundingText query.
[ChangeLog][QtWidgets][QLineEdit] Fixed behavior of the
ImSurroundingText query. Previously, it returned a masked
text whose length may be less than the cursor position.
Now it returns unmasked text, so the text length is always
greater than or equal to the cursor position.
Task-number: QTBUG-60319
Change-Id: I1c8009164836a1baa2e3a45958bf1ea5fa9be38d
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Conflicts:
src/widgets/kernel/qwidget.cpp
This merge also extends the expected output of the pairdiagnostics
teamcity output (added in dev in commit
c608ffc56a) after the recent addition of
the flowId attribute to the teamcity output (commit
8f03656211 in 5.9).
Change-Id: I3868166e5efc45538544fffd14d8aba438f9173c
If in a slot connected to QAbstractItemView::clicked
QAbstractItemView::setModel(nullptr) is called the method
QAbstractItemView::mouseReleaseEvent will cause a segmentation fault.
The problem is that the method QAbstractItemView::model used in
QAbstractItemView::mouseReleaseEvent will return a nullptr if a null
model was set. The solution is to used d->model since it is always a
valid model. (See line d->model =
(model ? model : QAbstractItemModelPrivate::staticEmptyModel());
in method QAbstractItemView::setModel)
Change-Id: I6f01bdeac64495ee4a76adcc7bf8da8a7719ef4d
Reviewed-by: David Faure <david.faure@kdab.com>
These tests need fixing, but they are already partially blacklisted
and need investigation once the switch is completed.
Task-number: QTQAINFRA-1292
Task-number: QTQAINFRA-1355
Task-number: QTQAINFRA-1362
Change-Id: Ic50d0c4a01ee7e72be1129d418eff244ba783185
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This test fails on Windows 10 x64 Creators Update CI builds for unknown reasons.
Change-Id: I766bccfd4dea9ea195c68403018b419e800a7b3b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
tst_qgraphicswidget::checkReason_ActiveWindow fails on Windows 10
Creators Update. Added expect fail for Windows platform.
Task-number: QTBUG-62244
Change-Id: I71868a496659e7136af9a5b74684ba39edaf03ae
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Moving the cursor is not synchronous.
Change-Id: I6b820af026585e1fcfef845cc712fa8f6812e941
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
internalInsert() will set the cursor to the right position which accounts
for any input mask set on the control as well. Therefore it will already
be placed at the next correct position and should not be changed again
after that.
Task-number: QTBUG-40943
Change-Id: Ic0f5fad6999ddd367e435ec4409a5db5b9eacb7b
Reviewed-by: Daniel Teske <qt@squorn.de>
Reviewed-by: David Faure <david.faure@kdab.com>
Change-Id: Id220f10f4ff756230155c7c8f37713d53ed3ca0c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's flakey/failing on macOS, the menu is opened but opened above
the button, so the intersection test fails.
Change-Id: I6b13a1b0df2b07fa36bbb73071cdeb55547ac93a
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
...tst_qlineedit.cpp:1938:9: warning: explicitly assigning value of variable of type 'Qt::Key' to itself
-Wself-assign]
key = key;
~~~ ^ ~~~
Change-Id: I18a46f61e13f6e2c74edce869a1c36a7f3a0fb70
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Counting draw calls in the style is not a reliable way to count
italic items in the combobox.
Task-number: QTBUG-62080
Change-Id: I6cb6d54535f073f66cfcf61bb19eb645284c835d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Don't assume signals will not be emitted during show. The test should
focus on testing that changing the model results in change signals. What
happens before that is not under test, and not stable.
Change-Id: I71e62abc15fc81c069d7685e4342e795449c3632
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's failing when enabling synchronous expose events, but likely
due to making assumptions about expose behavior. Will be looked
at in more detail once the expose event patch is in, so we can
move forward.
Task-number: QTBUG-62092
Change-Id: Ie76b5f11ccf841981a42d2eda19fbcda8b43c36c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Getting the end position of the selection was not possible.
[ChangeLog][QtWidgets][QLineEdit] Added selectionEnd(), selectionLength(),
complementing selectionStart().
Change-Id: Iaecc624063d7c043f9502351f07eb76f869e86f1
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This is the result of running the (experimental) clang-tidy check
qt-modernize-qsharedpointer-create
Discarded changes:
- tst_qsharedpointer.cpp: not sure we want these replacements there
(→ separate change)
- tst_collations.cpp: hit in a template specialization that is
instantiated with both QSharedPointer and QSharedDataPointer.
Change-Id: I203c2646e91d026735d923473af3d151d19e3820
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Verify that all pixels of the grabbed image are green instead
of comparing an image loaded from file.
The test then also passes when High DPI scaling is active in
which case a twice as big pixmap with DPR=2 is obtained when
grabbing the widget.
Change-Id: Ie5244a39a68ea0defd2590cf30f251d660d0869b
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Scale coordinates in a few places, remove pixmap scaling in
grabWindow() (Windows).
Change-Id: Iba9e5d3ca55422a14eda09c8d04329a455d3acb3
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It's broken due to tst_QWidget::testDeletionInEventHandlers,
but the root cause is not known yet.
Task-number: QTBUG-61986
Change-Id: I5b77efaf6910123d10a1456c54b873100e538a69
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Change-Id: I7dbe9c7a91301e0002f9e1827f6d0b495d2b9ec5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The test assumes that resizing a QWidget to 0x0 will result in the
QWindow ending up with that size, and hence not being exposed, but
this is not the case. On a QWindow level we treat 0x0 as a trigger
for the platform layer to set the default size, and the window
ends up exposed.
Ideally QWindows should allow 0x0 sizes, but this is a bigger change.
In the meantime, we skip the tests so that other changes can be
integrated without the test failing.
Task-number: QTBUG-61953
Change-Id: Ib17187b4afd1b06eaa76653be18e93abea555b59
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Consider the raw string \\\\. The previous algorithm would consider
the last 3 \ to be escaped because the previous character is a \ and
thus calculating a maxLength of 3.
But this should be treated as two escaped \ with a maxLength of 2.
Change-Id: I6c4b8d090a2e1c6e85195d5920ce8b80aea1bc2d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
setDoubleStep works in the same manner as for setIntStep in that it is
just available for input dialogs getting a double.
[ChangeLog][QtWidgets][QInputDialog] Added setDoubleStep to enable
changing of the step amount for getDouble().
Task-number: QTBUG-17547
Change-Id: I5cabcfceb23324f8045f2b1e49017644418db01a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Changes internal data-size and pointer calculations
to qssize_t.
Adds new sizeInBytes() accessor to read byte size, and
marks the old one deprecated.
Task-number: QTBUG-50912
Change-Id: Idf0c2010542b0ec1c9abef8afd02d6db07f43e6d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
macOS hasn't had SC_ScrollBarAddLine and SC_ScrollBarAddLine
since 10.7, when transient scrollbars first appeared.
We also make the warning message a bit more informative.
Change-Id: Idef4684162456d9bc274eea77908a6afe24fa0f5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Subtract the viewport margins from the contentsRect in
QCommonListViewBase::updateHorizontal/VerticalScrollBar(). This
affects list views in icon mode and list mode / ScrollPerPixel.
Task-number: QTBUG-61383
Change-Id: I6f2f7951ac9344ac21cef1eba061780d130e2467
Reviewed-by: David Faure <david.faure@kdab.com>
A visibile QOpenGLWidget receives a QEvent::WindowChangeInternal which triggers
a QOpenGLWidget::reset(). A hidden QOpenGLWidget never received this event
so it was never reset, resulting in a black rendering.
Includes unit-test that fails without this patch.
Change-Id: I9d2c57d66fa629f631a9829a5ebf4de09998ad75
Task-Id: QTBUG-60896
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
tst_qvariant.cpp(80): warning C4309: 'initializing': truncation of constant value
tst_qvariant.cpp(4635): warning C4309: 'initializing': truncation of constant value
tst_qbytearray.cpp(1438): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
tst_qbytearray.cpp(1440): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
http2srv.cpp(64): warning C4018: '<=': signed/unsigned mismatch
tst_qinputdialog.cpp(352): warning C4804: '<=': unsafe use of type 'bool' in operation
Change-Id: Id012d88b7b20c5c9f128f2ef53753cc1d479f358
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test fails for unknown reasons when using the mesa swrast when using
qemu/kvm (as opposed to when using the vmware mesa driver).
Task-number: QTQAINFRA-1318
Change-Id: Ib7e9d894cd368b8c2c12d83ec1e4862622781fe6
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
It's failing for inexplicable reasons not only on 10.10 but also 10.11.
Task-number: QTQAINFRA-1317
Change-Id: Id316764443dfe9e0ae30e2d25d8bae73fa255617
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The test is failing inexplicably on macOS 10.11.
Task-number: QTQAINFRA-1315
Change-Id: Ia0162768b6d4fdd016bce62b92c3df0b5d4ed8d0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
qtreewidget.h:179:53: warning: 'search' may be used uninitialized in this function [-Wmaybe-uninitialized] ^~
tst_qtreewidget.cpp:1564:22: note: 'search' was declared here
QTreeWidgetItem *search;
tst_qtreewidget.cpp: In member function 'void tst_QTreeWidget::expandAndCallapse()':
tst_qtreewidget.cpp:2678:18: warning: 'p' may be used uninitialized in this function [-Wmaybe-uninitialized]
Change-Id: I19c9dc86aa12f36c26ae2475f1854ed17fad0638
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
show will use the platform's default flags but the test actually checks
for the flags that were set before so we have to use setVisible(true)
instead.
Change-Id: I52c055ec07d6f0dee626626318c875aefdf67484
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
FAIL! : tst_QWidget::restoreVersion1Geometry(geometry.dat) Compared values are not the same
Actual (((widget.pos()))): QPoint(90,90)
Expected (expectedPosition): QPoint(100,100)
Loc: [tst_qwidget.cpp(3193)]
Remove the previously added QSKIP since this test now passes.
Task-number: QTBUG-26421
Task-number: QTBUG-46116
Change-Id: Ieff474a8a69c14a0df231a9a587aee02df4e8ea7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
- Put all widgets in one dialog so that show/setActive occurs only once.
- Use the center of the widget geometry for positioning.
- Remove BypassWindowManagerHint which likely causes qWaitForWindowActive()
to fail.
- Move the cursor out of the way and subsequently send mouse events
to the QWindow
Task-number: QTBUG-51400
Change-Id: I2176d8dbaead72d7a6fa89aa769e4c804eea7a0c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Due to popular demand. It does have it benefits (especially when
it comes to convenience) to allow grabbing QOpenGLWidgets even
when they are not part of an actual window and are not actually
visible.
Does not involve much more than dropping the warnings and bailouts
when there is active native window (because the QOpenGLWidget/its
parents are still hidden).
In addition the device pixel ratio from metric() has to be fixed
as well.
[ChangeLog][Qt Widgets] QOpenGLWidget is now able to render and
return its content via grabFramebuffer(), QWidget::grab() or
QWidget::render() even when the widget has not been made visible.
Task-number: QTBUG-47185
Task-number: QTBUG-61280
Change-Id: Icc2b0b3ce9778a3eb6409d54744238568abb0f0d
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
By avoiding unneeded nested QPainters.
Crash was:
ASSERT: "s" in file /data/sources/qt/qt5/qtbase/src/gui/painting/qpaintengine_raster.cpp, line 2239
s was nullptr because the inner QPainter had called updateState(0), which is then dereferenced by the outer QPainter.
Task-number: QTBUG-61036
Change-Id: I7aad648f805f1abac4d38dfbefa2292da8b52af4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
It's the subdir where the implementation also lives. There's no
src/widgets/gestures, either.
Change the mac: into a darwin: scope in the .pro file, so Sanity Bot
does not complain.
Change-Id: I7608d6da05af4a1117db585798a87a20ae80717a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Add additional code paths to map the index passed by QCompleter in its
activated() signal in case when QCompleter's model isn't the same as
QComboBox's one.
Task-number: QTBUG-52027
Change-Id: I1d74037fccbe19962bb7f242aa7b1c2441aa5d54
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
In the referenced bug report, dismissing a QFileDialog while the
Qt Virtual Keyboard was in use would result in a crash.
Dismissing a file dialog created with
e.g. QFileDialog::getOpenFileName() causes it to eventually be
destroyed. When this happens, it starts deleting its children. Each
child widget's destructor calls clearFocus(). In clearFocus(), there is
a block of code that emits QWindow::focusChanged(), passing the result
of focusObject() called on that widget's window.
QWidgetWindow::focusObject() could end up using itself as a fallback
focus object if it had no other focus objects (e.g. children) to use
instead, even though it was in the process of being destroyed; as were
all of its children. The Qt Virtual Keyboard plugin would then try to
use the focus object, even though it was in an invalid state.
To fix this problem, we return early from QWidgetWindow::focusObject()
if the window is in the process of being destroyed.
Task-number: QTBUG-57193
Change-Id: I137cf9415812ce2e0419c0afe8076ce150f248cb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jarkko Koivikko <jarkko.koivikko@code-q.fi>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This makes the test a lot faster and perhaps more reliable.
Change-Id: I055cfde627c75f71735eabbf01af2a196bd8b00a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
It was grabbing a QLabel without accounting for the size of
the window in the case where the DPI is larger than 1:
FAIL! : tst_QWidget::translucentWidget() Compared values are not the same
Actual (actual.size()) : QSize(32x32)
Expected (expected.size()): QSize(16x16)
Change-Id: I4873f3c6364ee2696f5612d91e6c97c60b2cd915
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
