If CMake 3.18 was built with insufficient library dependencies then Qt's
build will fail when file(ARCHIVE_CREATE) is called.
Configure with -DQT_AVOID_CMAKE_ARCHIVING_API=ON to choose code paths
were file(ARCHIVE_*) is not used.
Change-Id: I30c390498337ab0fa78b88b66d2f8feaa1f3f10b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
"ninja install_docs" should not run the "docs" target, because with
the usual workflow
ninja docs
ninja install_docs
the documentation would be built twice.
That of course means that "ninja install_docs" will fail if "ninja
docs" wasn't run before.
Analogous for html_docs, qch_docs, the repository-level and
module-level documentation targets.
Change-Id: I8ad83602dd393b5afc79a19ab3d395987c889d0d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The following targets did not do any actual installation:
install_docs, install_html_docs, install_qch_docs,
plus their repository-level counterparts.
Add the following dependencies:
install_html_docs
--> install_html_docs_<repo>
--> install_html_docs_<module>
Analogous for qch.
The install_docs target already triggers install_html_docs and
install_qch_docs. Analogous for install_docs_<repo>.
Fixes: QTBUG-86738
Change-Id: I3468e000e050e2787a859e61d40161f5459cb351
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When checking the value of CMAKE_INTERPROCEDURAL_OPTIMIZATION_<CONFIG>,
then <CONFIG> must be the upper case configuration name.
Also, we must not unset __qt_ltcg_detected, because the feature
condition evaluation happens way after the feature definition, and
__qt_ltcg_detected was not available anymore there.
This commit amends 96bdcdacbc.
Fixes: QTBUG-87874
Change-Id: I2b555bd1d7fbc8973e1d9493045c27d61b0d2c1b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Tools and library DLLs already have version information embedded.
Add the missing _qt_internal_generate_win32_rc_file call for plugins.
Fixes: QTBUG-87747
Change-Id: I619948f4066ce229d41e8b93f125751e1d28e26c
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QStyle::styleHint returns int, and that int was simply used to
build a QChar representing the "password mask" character.
Enforce that it actually fits and then do an explicit cast.
(In general, of course, this is an API flaw; styleHint should
somehow return a QString for this use case).
Change-Id: Ifb6181b229b91cc84859cb9b9d57e21d6748c31a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure <david.faure@kdab.com>
INPUT_ variables enable FEATURE_ variable only in case if valid
"true"-like value is assigned from command line.
Amends dc43061e9a
Fixes: QTBUG-87755
Task-number: QTBUG-88142
Change-Id: I65e85c7548981fdec94366b531f6df6396be71b7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This fixes an issue where, on Windows, 'ninja test' will error out:
[0/1] Running tests...
Test project C:/dev/qt/dev/cmake-msvc-2019-amd64/qttools
CMake Warning (dev) at C:/dev/qt/dev/cmake-msvc-2019-amd64/qttools/tests/auto/cmake/CTestTestfile.cmake:7 (add_test):
Syntax error in cmake code at
C:/dev/qt/dev/cmake-msvc-2019-amd64/qttools/tests/auto/cmake/CTestTestfile.cmake:7
when parsing string
-DCMAKE_TOOLCHAIN_FILE=C:\dev\qt\dev\cmake-msvc-2019-amd64\qtbase\bin\/../lib/cmake/Qt6/qt.toolchain.cmake
Invalid escape sequence \d
Change-Id: Ifc727e44b20b899b44c7c1398d4273d73b7519ca
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
A dependency was missing, causing qduplicatetracker_p not to be found.
Change-Id: I4076d6cf82d804354731c357bcdbfd03c3d42142
Reviewed-by: David Faure <david.faure@kdab.com>
Inline private constructors, use class initialization consistently.
Export only non-inline'd members.
Change-Id: I18f38214bbd03af711fe7ee1314d59e06733a0ec
Reviewed-by: Jonas Karlsson <jonas.karlsson@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Remove or fix references to removed APIs, and some qdoc syntax fixes.
Change-Id: I67d71062cd7a29f4eb74b02199b1482af5e59fc0
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
QInputDevice data types changed from 16 bit to int in
742de50c5e
Change-Id: Id2760b5b685e5efc14ee6f9e36e2b30a5b188cdd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Fixed misleading naming of "slowReallocatePath". It's no longer "slow",
it's downright dangerous now to reallocate under certain conditions
While at it, added extra assert to QArrayData::reallocateUnaligned()
and cleaned up that function a bit
Change-Id: I05921fb5058eb563997e66107566c87fb4ea5599
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There’s no need to convert the file name/path to QUrl,
and then back again to QString before calling qt_findAtNxFile().
Call qt_findAtNxFile first, and then convert to QUrl.
This makes sure the url-name and string-name stays
in sync.
Change-Id: I8b8939eabbdaff473945ebe31faafd408e9c4295
Pick-to: 5.15
Fixes: QTBUG-60793
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Change-Id: I47504d6c032c9a6ace7440580f0081cc5f254038
Reviewed-by: Maximilian Goldstein <max.goldstein@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We have some cache variables that are used in our qt.toolchain.cmake
toolchain file, for example QT_CHAINLOAD_TOOLCHAIN_FILE. When CMake
runs a configure test with try_compile, our toolchain file is included
again, but only a restricted set of variables is available.
Add the variables that are used in our internal toolchain file to
CMAKE_TRY_COMPILE_PLATFORM_VARIABLES. This makes them visible for
try_compile calls operating on source files.
Also pass the variables via the environment to support try_compile
calls that operate on whole projects.
Fixes: QTBUG-87873
Change-Id: Iebca9e23686bec5072194b15482e1782b9367a0e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
While _M_ARM is a MSVC specific builtin define, mingw headers do
also define it (in code, as opposed to a compiler built in
define), just as the same headers do for e.g. _M_IX86 and _M_X64.
This avoids warnings about unrecognized pragmas, when compiling
for armv7 mingw.
The original compiler bug (from QTBUG-42038) probably already is
fixed and/or no longer in scope.
Change-Id: I98722e2a7ee1de4f1937a866555ec460f5d898d1
Pick-to: 5.15
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Batch files should be CRLF, otherwise they may end up triggering an
"The system cannot find the batch label specified" error.
Relying on core.autocrlf to ensure this runs the risk of the user not
having the config set correctly, and also doesn't cover the use of
the same source checkouts across platforms.
Change-Id: I3166b99ce38e4ba9a0674336d69aa915e27860d1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This helps a bit with LinuxFB on low end devices.
Change-Id: I16fcce23e7073272d1d1c6bc660c255163b96c30
Fixes: QTBUG-88174
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
We want to re-enable Android tests in QTQAINFRA-3867. However,
many tests are failing already preventing that from happening.
QTBUG-87025 is currently keeping track (links) to all of those
failing tests.
The current proposal is to hide those failing tests, and enable
Android test running in COIN for other tests. After, that try
to fix them one by one, and at the same time we can make sure
no more failing tests go unnoticed.
Task-number: QTBUG-87025
Change-Id: Ic1fe9fdd167cbcfd99efce9a09c69c344a36bbe4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This must be possible with a new set of changes and the way QString
reallocates
Task-number: QTBUG-86583
Change-Id: I513f51d7c6e984ae4e81fc344138687c791037c4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use GrowsAt* and GrowthPosition as that is clearer.
Change-Id: I3c173797dec3620f508156efc0c51b4d2cd3e142
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When storing complex types in the list and inserting in the middle,
we ended up in some cases moving the items in the list onto itself,
to make space for 0 new items.
Obviously that's not a very good idea. It was not a huge deal for
POD or relocatable types as we'd use memmove in that case which would
return quickly. But for complex types, we actually did copy around
half of the items stored in the list onto themselves.
Change-Id: I54467dccf2e17ba4a604bded755242197dd96b06
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
This improves the performance of QList<QString>::append/prepend()
and we now beat QVector in Qt 5. QList from Qt 5 is still a bit
better for QString, but this might be related to the fact that
QString in Qt 6 is larger than in Qt 5.
Appending 20M integers to the list gives:
Qt 6: 35ms
Qt 5.15/QVector: 99ms
Qt 5.15/QList: 78ms
Appending 20M QStrings to the list gives:
Qt 6: 172ms
Qt 5.15/QVector: 194ms
Qt 5.15/QList: 136ms
Appending 20M structs of three pointers gives (100M will
crash in Qt5 as 100M*24bytes overflows):
Qt 6: 109ms
Qt 5.15/QVector: 272ms
Qt 5.15/QList: 469ms
Prepending 20M integers to the list gives:
Qt 6: 58ms
Qt 5.15/QList: 90ms
Prepending 20M QStrings to the list gives:
Qt 6: 448ms
Qt 5.15/QList: 147ms
Prepending 20M structs of three pointers gives (100M will
crash in Qt5 as 100M*24bytes overflows):
Qt 6: 267ms
Qt 5.15/QList: 435ms
No numbers for prepending to a QVector in 5.15 as the operation
was O(n) there. The difference in time between append and prepend
comes from the fact that our growth policy favors appending to
some extent.
Change-Id: Ice4598df5ca408413bfb00f5fe05e0b8d512623d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Added realloc() code path to QMovableArrayOps
Implemented fast realloc() based growing for QADP and used it in
QList::emplaceBack. This gives quite a bit of speedup and shows better
results than 5.15 at 100k+ iterations of "list.append(elem)", meanwhile
also closing a gap between movable types
Task-number: QTBUG-87330
Change-Id: I42fc182ecd93c85600dac622385152fc57735da8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
My endeavours figuring out why QList::append(elem) gives worst
performance compared to 5.15 ended up into this commit. After some
straightforward fixes, what was left is "everything is uniformly worse"
and takes more CPU cycles
Introduce emplaceBack implementation as append is quite a special case
that could be greatly simplified. This is a "straightforward" part of
the optimizations
While at it, change append(t) to use emplaceBack(t)
For workloads like:
QList<int> list;
forever {
list.append(0);
}
this gives huge improvement (roughly 30% for 10k+ elements),
movable and complex types also get a tiny speedup
Task-number: QTBUG-87330
Change-Id: I9261084e545c24e5473234220d2a3f2cd26c2b7f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Inline them into the one place they are called from
and remove duplicated code.
Change-Id: Ica88485e98625905083b16c24ee9eaf223a89ae0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
This allows us to unify and simplify the code base between QList,
QString and QByteArray.
Change-Id: Idc8f360d78f508a68f38eb3ef0ed6e5d37f90574
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Get rid of the allocation options inside the flags
field of QArrayData, they are really a completely
separate thing.
Change-Id: I823750ab9e4ca85642a0bd0e471ee79c9cde43fb
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Don't use QArrayData::GrowsForward/Backward anymore and replace
it with a simple 'bool grow'.
Change-Id: Ifddfef3ae860b11dda4c40854c71ef2aeb29df34
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
reallocate() should only ever call realloc(), and only be used to
create more space at the end of the data.
Change-Id: I2ac4dbc90d2afaa571bb620108d7984356712cb2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
The while insertion logic will need further work to make it
more efficient. Currently it does use copy construction and
assignment for internal moving instead of move operations.
Change-Id: I7ae3094daa43a44629d8fa89ab6562c2a21b6cbd
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's causing a performance bottleneck and is not required anymore
after changing the allocation strategy.
Take the opportunity to change the signature from using size_t to
qsizetype.
Change-Id: I74ff1637007cf7072de80e7383a23fdfe1ccd986
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Avoid moving data inside the array to create free
space at one end. This is a performance bottleneck,
as it required quite a lot of calculations for every
insert. Rather reallocate and grow in this case,
so we only need to do expensive work when we reallocate
the array.
Change-Id: Ifc955fbcf9967c3b66aa2600e0627aac15f0c917
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
It looks like we can drastically simplify the way QADP grows without
sacrificing much:
1. append-only use cases should have the same performance as before
2. prepend-only use cases should (with the help of other commits) get
additional performance speedup
3. mid-insertion is harder to reason about, but it is either unchanged
or benefits a bit as there's some free space at both ends now
4. mixed prepend/append cases are weird and would keep excess free
space around but this is less critical and overall less used AFAIK
Now, QList would actually start to feel like a double-ended container
instead of "it's QVector but with faster prepend". This commit should
help close the performance gap between 6.0 and 5.15 as well
As a drawback, we will most likely have more space allocated in mixed
and mid-insert cases. This needs to be checked
Task-number: QTBUG-86583
Change-Id: I7c6ede896144920fe01862b9fe789c8fdfc11f80
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Prepend in QList was using insert() logic that always uses append-aware
functions. This results in the fact that freeSpaceAtBegin() is always 0
and forces us to actually allocate on *every* call (with the same
capacity!). Vicious cycle is hot-fixable with introduction of
emplaceFront (or anything prepend-aware, really)
This brings me from 632ms to 0.65ms for 100k iterations of
list.prepend(int(0)). Still ~3x worse than QList in 5.15 but much
faster than QVector, which takes 382ms in the same workload
Not addressed:
- QString/QBA
- Other prepend functions in QList e.g. prepend(it1, it2)
- Lower-level array operations that should just be extended
Task-number: QTBUG-86583
Change-Id: Ie82b07d81a67605cd308d9fabf9532d57935647f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added some simple benchmarks for QList insertion of 1 element
Added same tests for QVector (within the same file) for 5.15
Task-number: QTBUG-87330
Task-number: QTBUG-86583
Pick-to: 5.15
Change-Id: I19a851c79cf5ce0329266883e99ecaf2d6b3df19
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
emscripten_async_run_in_main_runtime_thread_ schedules
an async call on the on the main thread. However, the
calls are ordered, also in respect to _synchronous_ calls
to the main thread (for example those made during file
write/flush).
Making a synchronous call from a secondary thread may
then cause Emscripten to service previously scheduled
async calls during the synchronous call. This can cause
a deadlock if:
- a secondary thread makes a sync call while holding a lock, and
- a previously scheduled async call attempt to acquire the same
lock on the main thread.
(See https://github.com/emscripten-core/emscripten/issues/10155
for sample code)
Avoid this case by adding a second zero-timer async call;
this way Qt should process events when the main thread
becomes idle.
Change-Id: I221fe4e25bbb1a56627e63c3d1809e40ccefb030
Pick-to: 5.15
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
QtConcurrent::blockingMapped was not able to determine the result
type in case of passing containers that have more than one template
argument. This should be fixed by the parrent commit.
Also fixed some unrelated compiler warnings.
Change-Id: I96618dc955c5e4c3792f28f6436d6851745dc01d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This makes it feature comparable with QAction, and makes it possible
to use as a backend for QAction, and fixes a few missing alternative
keybindings in qtwidgets.
Change-Id: Iaefc630b96c4743fc5ef429dc841870ddd99fc64
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
These were omitted in the original change, which cause cmake builds to
fail configuring
Change-Id: I37996099aaa0d912ce06b1f06c175cc5cf159e33
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This define is only supposed to be used for i386, but was set for
any 32 bit mingw architecture (which also covers armv7).
Change-Id: Iedc057dfc493015e8339db837dbe20a57c2b2367
Pick-to: 5.15
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
