When a foreign event loop that does not enter an alertable wait state
is running (which is also the case when a native dialog window is
modal), pipe handlers would freeze temporarily due to their APC
callbacks not being invoked.
We address this problem by moving the I/O callbacks to the Windows
thread pool, and only posting completion events to the main loop
from there. That makes the actual I/O completely independent from
any main loop, while the signal delivery works also with foreign
loops (because Qt event delivery uses Windows messages, which foreign
loops typically handle correctly).
As a nice side effect, performance (and in particular scalability)
is improved.
Several other approaches have been tried:
1) Using QWinEventNotifier was about a quarter slower and scaled much
worse. Additionally, it also required a rather egregious hack to
handle the (pathological) case of a single thread talking to both
ends of a QLocalSocket synchronously.
2) Queuing APCs from the thread pool to the main thread and also
posting wake-up events to its event loop, and handling I/O on the
main thread; this performed roughly like this solution, but scaled
half as well, and the separate wake-up path was still deemed hacky.
3) Only posting wake-up events to the main thread from the thread pool,
and still handling I/O on the main thread; this still performed
comparably to 2), and the pathological case was not handled at all.
4) Using this approach for reads and that of 3) for writes was slightly
faster with big amounts of data, but scaled slightly worse, and the
diverging implementations were deemed not desirable.
Fixes: QTBUG-64443
Change-Id: I66443c3021d6ba98639a214c3e768be97d2cf14b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This patch marks some functions "override" to silence the corresponding
warning.
Change-Id: I88ccc5fa7521ecccc84a6cba9f06ea185cc5679e
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The benchmark used to crash because QMetaType::typeName would return an
empty string, which is not a legal value for newRow.
Change-Id: I9e6c6c1cf153943bfa21181cd2cca596a7943ea0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Clang warning: 'isSequential' overrides a member function but is not
marked 'override' [-Winconsistent-missing-override]
Change-Id: I1a7c5516d2656469eab556e7f9d310192510b99b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
And remove the direct conversion so we can get both the SIMD
optimization and threading applied.
Change-Id: Id032ea91cc40c1cbf1c8a1da0386de35aa36cfb5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also remove tests/tests.pro that would be empty without the benchmarks.
Change-Id: Iaf92a729d1286b3e0c03bf9f877b59e1d83708e6
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- Skip unused metatype id
- Do not construct a QVariant from an int, when we instead want to
construct a QVariant for a given metatype (was: metatype id in Qt 5)
Pick-to: 6.0
Change-Id: I1ac19dec5549b424a9429f69999eaf8e96c022e2
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The benchmark simply calls QRegularExpression's public API methods, so
that we can assess how changes to the implication impact performance.
(Its addition is prompted by evaluation of whether adding a move
constructor saves more or less than the resulting need for
d-pointer null-checks costs.)
Task-number: QTBUG-86634
Change-Id: Idef775ef6cf9f9ded3ce7ba5b85e460571d12756
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Those serve no purpose anymore, now that the .pro files are gone.
Task-number: QTBUG-88742
Change-Id: I39943327b8c9871785b58e9973e4e7602371793e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Per the discussion of QTBUG-88831, we determined that module-wide
imports are unfortunate, especially for compile times. Following this,
all QtDBus includes have been replaced with the headers for the classes
actually used in each file. Additionally, some cleanup of header file
order and format has been performed in the changed files.
Pick-to: 6.0
Change-Id: I62c1b75682a48422f0ba1168dd5d7bd0952808ac
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Q_MOVABLE_TYPE was conceived before C++ had move semantics. Now, with
move semantics, its name is misleading. Q_RELOCATABLE_TYPE was
introduced as a synonym to Q_MOVABLE_TYPE. Usage of Q_MOVABLE_TYPE
is discouraged now. This patch replaces all usages of Q_MOVABLE_TYPE
by Q_RELOCATABLE_TYPE in QtBase. As the two are synonymous, this
patch should have no impact on users.
Pick-to: 6.0
Change-Id: Ie653984363198c1aeb1f70f8e0fa189aae38eb5c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
This patch removes two unused variables and marks one unused, fixing
three warnings.
Change-Id: I71f59839452590b82ffb5459a968f06bd434fb9a
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
This reverts commit ee122077b0.
Reason for revert: This causes QProcess::readAll() to sometimes
return nothing after the process has ended.
Fixes: QTBUG-88624
Change-Id: I34fa27ae7fb38cc7c3a1e8eb2fdae2a5775584c2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
(cherry picked from commit 23100ee61e33680d20f934dcbc96b57e8da29bf9)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
When a foreign event loop that does not enter an alertable wait state
is running (which is also the case when a native dialog window is
modal), pipe handlers would freeze temporarily due to their APC
callbacks not being invoked.
We address this problem by moving the I/O callbacks to the Windows
thread pool, and only posting completion events to the main loop
from there. That makes the actual I/O completely independent from
any main loop, while the signal delivery works also with foreign
loops (because Qt event delivery uses Windows messages, which foreign
loops typically handle correctly).
As a nice side effect, performance (and in particular scalability)
is improved.
Several other approaches have been tried:
1) Using QWinEventNotifier was about a quarter slower and scaled much
worse. Additionally, it also required a rather egregious hack to
handle the (pathological) case of a single thread talking to both
ends of a QLocalSocket synchronously.
2) Queuing APCs from the thread pool to the main thread and also
posting wake-up events to its event loop, and handling I/O on the
main thread; this performed roughly like this solution , but scaled
half as well, and the separate wake-up path was still deemed hacky.
3) Only posting wake-up events to the main thread from the thread pool,
and still handling I/O on the main thread; this still performed
comparably to 2), and the pathological case was not handled at all.
4) Using this approach for reads and that of 3) for writes was slightly
faster with big amounts of data, but scaled slightly worse, and the
diverging implementations were deemed not desirable.
Fixes: QTBUG-64443
Change-Id: I1cd87c07db39f3b46a2683ce236d7eb67b5be549
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
QChar should not be convertible from any integral type except from
char16_t, short and possibly char (since it's a direct superset).
David provided the perfect example:
if (str == 123) { ~~~ }
compiles, with 123 implicitly converted to QChar (str == "123"
was meant instead). But similarly one can construct other
scenarios where QString(123) gets accidentally used (instead of
QString::number(123)), like QString s; s += 123;.
Add a macro to revert to the implicit constructors, for backwards
compatibility.
The breaks are mostly in tests that "abuse" of integers (arithmetic,
etc.). Maybe it's time for user-defined literals for QChar/QString,
but that is left for another commit.
[ChangeLog][Potentially Source-Incompatible Changes][QChar] QChar
constructors from integral types are now by default explicit.
It is recommended to use explicit conversions, QLatin1Char,
QChar::fromUcs4 instead of implicit conversions. The old behavior
can be restored by defining the QT_IMPLICIT_QCHAR_CONSTRUCTION
macro.
Change-Id: I6175f6ab9bcf1956f6f97ab0c9d9d5aaf777296d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Instead of multiplexing all notifications into a single Qt event for
the event dispatcher, we can send 'WinEventAct' event directly for each
notifier which activated. This trick improves the performance (esp.
on a large number of events) and allows us to remove notifiers handling
from the event dispatcher completely.
As an alternative to sending Qt events, use of Windows' APC queue in
conjunction with waking up the Qt event loop from within the Windows
thread pool has been considered. However, that would lead to signal
emission asynchronous to the Qt event loop's operation, which is not
acceptable.
Thanks to Oswald Buddenhagen for the proposed idea.
[ChangeLog][QtCore][QAbstractEventDispatcher] The
{un}registerEventNotifier() member functions have been removed.
QWinEventNotifier is no longer needed to be registered in the
event dispatcher.
Change-Id: I140892fb909eaae0eabf2e07ebabcab78c43841c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Emplace() implemented with std::rotate is just awful on my system
(Ubuntu 18.04 GCC 7.5.0). Custom code is much faster, so go for
it. Cannot really use insert() code, which is also fast, because
it doesn't forward-reference values but copies them always
Changes in performance (approximately) for emplacing 100k elements
into the middle:
Complex 7600ms -> 1700ms
Movable 7600ms -> 200ms
Task-number: QTBUG-86583
Change-Id: If883c9b8498a89e757f3806aea11f8fd3aa3c709
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added some simple benchmarks for QList insertion of 1 element
Added same tests for QVector (within the same file) for 5.15
Task-number: QTBUG-87330
Task-number: QTBUG-86583
Pick-to: 5.15
Change-Id: I19a851c79cf5ce0329266883e99ecaf2d6b3df19
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add a almost trivial benchmark for QString::number(int).
Change-Id: Ice67eaf28e8d7b235fd5ec5e0b87b3b9053ae61e
Reviewed-by: Karsten Heimrich <karsten.heimrich@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QString::toUpper() now insists we use its return, so the benchmark
won't compile unless we do so. Also document the helper macro used by
the tests, to explain why it's even there at all.
Change-Id: I830f121d92867bcd09277ecdeb1c764413b34fa6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Since we're going to split QMutex and QRecursiveMutex into
separate classes, make sure QMutexLocker is prepared for that.
Change-Id: Id5e9a955d1db7c8ee663dd3811ad6448dad0aeae
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Use QScreen APIs instead.
Change-Id: Ie99af94fe4292223dbb165b3f5c1b74e8fe0498b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Clean up the state of the projects,
before changing the internal CMake API function names.
Task-number: QTBUG-86815
Change-Id: I90f1b21b8ae4439a4a293872c3bb728dab44a50d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Changes the definition of invalid QRects to be more consistent.
This simplifies the logic, and makes it possible for us to fix
normalized() so dimensions don't change.
The actual API is not changed except for inverted rects.
Only one use-case for the old normalized() function existed,
and has been reimplemented as QRect::span().
Fixes: QTBUG-22934
Change-Id: I29dad2952dc6c8e84a6d931898dc7e43d66780f3
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QStyleOptionGraphicsItem::matrix and levelOfDetail are deprecated and
not used anywhere anymore.
Change-Id: Id4b0fa8ac3ac53d771e858ecda5524a5e690342d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
A large slice of it has been deprecated since 5.2.
Reflowed a doc paragraph pointed out, in the deprecation commit, as
having been left ragged by its edits.
Note: qSwap() is documented as \deprecated but not marked, where it's
defined, as deprecated.
Change-Id: Iaff10ac0c4c38e5b85f10eca4eedeab861f09959
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove QTypeInfo::isStatic, as that's not used anymore in Qt 6.
Also remove sizeOf, it's unused, and we have QMetaType for that if
required.
Remove all typeinfo declaractions for trivial types, as the default
template covers them correctly nowadays.
Finally set up a better default for isPointer, and do some smaller
cleanups all over the place.
Change-Id: I6758ed37dfc701feaaf0ff105cc95e32da9f9c33
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove all the internal members of the union. Instead replace
it with raw storage (uchar[]) aligned to max_align_t.
Place all accesses to the internal members with get<> methods
for consistency.
Change-Id: Icebf46b90c9375aa6ea0b5913b2132608e8c223d
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Export some private functions from QUtf8 to resolve
undefined symbols in Qt5Compat after moving QStringRef.
Task-number: QTBUG-84437
Change-Id: I9046dcb14ed520d8868a511d79da6e721e26f72b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It was marked internal anyway. Use the constructor taking a
QMetaType instead.
Change-Id: I15b9cd0911aac063a0f0fe0352fa2c84b7f7c691
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Both normal and relaxed constexpr are required by our new minimum of
C++17.
Change-Id: Ic028b88a2e7a6cb7d5925f3133b9d54859a81744
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Also take this opportunity to reshuffle the content-encodings in the
intended ordering since the ordering is used to signify priority.
Task-number: QTBUG-83269
Change-Id: I022eecf1ba03b54dbd9c98a9d63d05fb05fd2124
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
mkspecs/features/qt.prf adds a dependency on the system threading
library if the Qt Core thread feature is enabled. Because qt.prf is
loaded by any public or internal Qt project, it's essentially a public
dependency for any Qt consumer.
To mimic that in CMake, we check if the thread feature is enabled, and
and set the Threads::Threads library as a dependency of Qt6::Platform,
which is a public target used by all Qt modules and plugins and Qt
consumers.
We also need to create a Qt6Dependencies.cmake file so we
find_package(Threads) every time find_package(Qt6) is called.
For the .prl files to be usable, we have to filter out some
CMake implementation specific directory separator tokens
'CMAKE_DIRECTORY_ID_SEP' aka '::@', which are added because we call
target_link_libraries() with a target created in a different scope
(I think).
As a result of this change, we shouldn't have to hardcode
Threads::Threads in other projects, because it's now a global public
dependency.
Task-number: QTBUG-85801
Task-number: QTBUG-85877
Change-Id: Ib5d662c43b28e63f7da49d3bd77d0ad751220b31
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
To support streaming decompression in QNAM.
Will also be used to refactor existing decompression code in QNAM.
Task-number: QTBUG-83269
Change-Id: Iecf3e359734163f15686c949f75d41fa4794a00e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Deprecated in 5.15 in favor of CBOR.
Fixes: QTBUG-81239
Change-Id: I711d4bd7dd1247f58e77ac9fa53304cbe5028918
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QTest::toString allocates memory by calling qstrdup; that memory must
be freed by the caller.
Change-Id: I9724db0c617884cf08592968b1411f002ef23204
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
