It seems there is a configure test which should enable it.
This reverts commit 7e4f0ad961.
Change-Id: I39c594e5e779732d2f5954b42e266a1eaa1be3f0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Use QXcbWindowFunctions::setWmWindowType() to add the corresponding
types to the window's _NET_WM_WINDOW_TYPE X11 window property.
Change-Id: Ia2413ad7a69ab8d49b448de11dd07c77101a564c
Task-number: QTBUG-39887
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Make mouse behave like touch and scrolling does: only do
high frequency qCDebugs when the category is enabled.
Switch over mouse, touch and scroll event logging to a new
sub-category: qt.qpa.input.events. This way qt.qpa.input
in itself behaves sanely on xcb, similarly to f.ex. eglfs,
giving only the basic, but important info.
Change-Id: I8dd588e72ae9d1c66096489fa3c5291f6d318ca0
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Widgets module is no longer required. Removing it allows this test to
be run with a qtbase configured with -no-widgets, which saves
compilation time.
Change-Id: Id99d3f25cd7b227aa81e1cf1ac7b6fd5227ac4c4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The code for handling of the rarely used "restore to previous" frame
disposal option would mistakenly clear the entire existing frame. It
looks like this was a copy/paste mistake in the code; the intention
obviously was to clear the newly created backingstore instead.
This fixes the rendering of
http://media1.giphy.com/media/9Jevgp0CgvAnm/giphy.gif
Task-number: QTBUG-55141
Change-Id: I4d344b7733edd62346656154e215c21727f9b6bb
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The Qt logo has changed (see http://brand.qt.io/ ) but it had not been
updated in the QMessageBox::aboutQt dialog, yet.
Task-number: QTBUG-55137
Change-Id: I81431e44efe65f576e62b92214aa835b82675d00
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We used to check if the SDK used by a project is less than 8.0 and error
out if so. The intention of the test was to avoid a situation where a
project is built with an SDK that is older than the one used to build Qt,
but this was obviously bogus, as Qt could have been built with a newer SDK
than the oldest supported one. Also, 8.0 has been outdated for quite a
while.
On top of that, the check failed now that the major iOS version has two
digits.
So let's remove the check for now, until we can handle this in a better
way.
See QTBUG-37592.
Change-Id: I6106b9521b5d47d9906d4db30c2ffa21794bc307
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
When xcodebuild in Xcode 8 beta dumps out the available
destinations, it prints an extra section called 'Ineligible
destinations for the "tst_someTest" scheme'.
Those destinations doesn't contain valid ID-s for the script to
use, which will result in "make check" failing.
This patch will filter out devices that are marked as placeholders.
Change-Id: I88a25b7307e21b76c6f7764a82f67627aae8f02f
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
As of version 10.12 (Sierra), the name of Apple's desktop operating
system will be macOS. Change the occurrences where the Mac platform
is discussed to use a macro \macos, which expands to 'macOS'. This
helps with adapting to future renaming.
Update the instructions on mac-specific Q_OS_* macro usage.
Add a \target for the old 'Qt for OS X' topic to keep links working
for other documentation modules that try to link with the old name.
Change-Id: Id33fb0cd985df702a4ae4efb4c5fd428e77d9b85
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Simply allocate objects on the stack instead of the heap.
Change-Id: Ic047d78e49668878821cce1c8ab599a8551b6476
Reviewed-by: David Faure <david.faure@kdab.com>
In QStringListModel, the display and the edit roles are synonyms,
so when one is changed, the other changes with it. However, in
setData() we only emitted a vector with just the role that was
passed in by the user.
Fix by always passing both roles, regardless of which one was used
to set the data.
Change-Id: I498e7cb33796fae266901817b01ad85d861d4bb4
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This gives a chance for some cleanups at least.
Change-Id: I3a628e32c6fc8c7fa00943769210c517005f2a0a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When pressing the Command key, or any other modifier key,
Cocoa will filter whatever the application has set in the
QDrag object. However, Qt is already taking all this into
account, so we should not let yet another voice chime in.
Task-number: QTBUG-55177
Change-Id: I7c56e72d846d10cdfc132776bdfdd6b79799bcff
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Visual Studio automatically defines _WINDLL when building a DLL,
regardless of project settings
(https://msdn.microsoft.com/en-us/library/8x480de8.aspx). This define
is therefore widely used to detect DLL vs. static library or executable
build target on Windows.
For makefiles, _WINDLL need to be manually defined, which QMake failed
to do so far.
Task-number: QTBUG-55183
Change-Id: Ic62201666c44e730e6881706d568ce9eaf22b7a4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This doesn't cover FBOs bound directly with glBindFramebuffer(),
but it's perfect to create a fast path for code we know uses QOGLFBO,
thus avoiding expensive glGetIntegerv() driver calls.
The use case is to use this in QSG24BitTextMaskShader::activate(), where
we need to check if the current FBO is sRGB capable.
Change-Id: I434eeeb7e6a3d16be9327315536ad7280245085d
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
I am not convinced toUpper/toLower is a generally sound solution here;
however, QLocale doesn't make the upper/lower case distinction this
parser does and a bug report shows tr() isn't doing an adequate job.
Task-number: QTBUG-47815
Change-Id: Iaf654d1d76d4c38d74fc647e168d50debb924a8f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The deleteLater() call wasn't reliably reached when tests fail,
so use a QScopedPointer with QScopedPointerDeleteLater deleter.
Change-Id: Ica73bc73c2a0ac1e9b77e4804f2aedcad9b662a0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
The test no longer writes to SRCDIR, so don't try to remove
generated files from there, either.
Amends bb5570082e.
Change-Id: I1d5df88b1865f3dbd914ec71147de61e173f2f4e
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Value was inverted.
Found by own code review.
Change-Id: I2027d97e1f9d52f6d79fb72ecad9ee2034f9af25
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
QAndroidEventDispatcherStopper is stopped when the application is in background
and the user uses the task manager to kill the task. If the application has
services the task manager doesn't kills it, but instead it tries to gently
terminate the activity. The problem is that the activity is still backgrounded
(meaning that the Qt event loop is freezed), therefore terminateQt will hang.
Task-number: QTBUG-54012
Change-Id: I6e333cbcaf41e9e298eeb8b2b0bc3adcf446783f
Reviewed-by: Christian Stromme <christian.stromme@qt.io>
QStyle was created but never removed
Change-Id: I55011377afd475af28e4ce2cf657e435dd37c96a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This warning has been introduced by VS2015 Update 3 and is not in our
control as the warning happens inside the system headers. To keep the
compile output clean, disable this warning.
Change-Id: I96253538c6d6774bb91cd5a4ea80dda2910e74b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
26238aca8c causes double deletion of the
QTouchDevice in case the post routine already cleaned up the list by the
time the touch handler gets to do it.
Just check the list of devices to see if the one we hold is still there.
If not, the pointer is likely to be a dangling one so do nothing.
This will avoid dying with bus error or similar on application exit.
Task-number: QTBUG-51562
Change-Id: I50c1edee7405aad308274538219698388c2cc9f9
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The first part adds QTabBarPrivate::initBasicStyleOption()
which is basically QTabBar::initStyleOption() but
without the expensive QFontMetrics::elidedText() call.
That is because QTabBar::tabSizeHint() would call
initStyleOption() and then immediately discard the result
of that computation.
Then, QTabBar::tabSizeHint() is modified to cache the calls
to QFontMetrics::size(), which is also expensive. The cache
is invalidated when the style or the font changes, or when
the elide mode is set.
Change-Id: I591b2e401af3576a2ebabc5b94f19ae157e28cf2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Wayne Arnold <wayne.arnold@autodesk.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This is only when the attached MIME data contains text, and we
fall back to rendering that text into a pixmap. It requires
getting the device pixel ratio from the source which, for now,
may be a QWidget or a QWindow. Other cases may exist, but that
would bring more dependencies than desired.
Similarly, it fixes the draggabletext example. Other examples
would require either to get updated pixmaps or change substantially
in order to support HiDPI (e.g., the fridgemagnets example).
Change-Id: I66198214233e3e06c87505744e2aaa9691fe1bb6
Reviewed-by: Filipe Azevedo <filipe.azevedo@kdab.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Enable switching application to fullscreen mode. This is mostly required
for desktop targets of WinRT.
Task-number: QTBUG-54517
Change-Id: I67e4020bc2ec8da86d94815e5765959f4ae2b63f
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Since STL support is mandatory in Qt 5, the sentence is a tautology
and can be removed.
Change-Id: I8676368cc917aa00a85b1113ed2a47694427b2ce
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
We should create the files with 0666 and let the umask take care of adjusting
to the final permissions in the file system.
[ChangeLog][QtCore][QLockFile] Fixed permissions on lock files on Unix to
allow for adjustments via umask.
Change-Id: Iee6a6ac3920d0ffd4465f54ac6e955f7fe087173
Reviewed-by: Denis Shienkov <denis.shienkov@gmail.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure <david.faure@kdab.com>
When running under callgrind, do not bother with the use of the watchdog. The
constructor waits for the thread to start, which adds an overall run-time cost
that depends on the OS scheduling.
Change-Id: I162e2e311c43a6892ebc67dea39899e40babb61d
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
We can't (at present) actually exercise the failure in
QWindowsLocalCodec::convertFromUnicode() that prompted us to consider
the possible failure here, but we should at least test for it.
Change-Id: I5066c88d7b4caeb48aebc6b79c355fa49e1c581c
Reviewed-by: Frederic Marchal <frederic.marchal@wowtechnology.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The section got introduced in commit 93d35c07d0, but is
ignored by browsers so far due to a non-blank space (0xc2 0xa0).
Task-number: QTBUG-55115
Change-Id: Ie0668b89c7151c934f40e033100a544011a583d8
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Sometimes, this test fails in CI due to notifications arriving
asynchronously from the OS. This happens inside closeWriteChannel()
call, where we are flushing the write buffer and I/O completion on
the read pipe could occur there as well. So, take this into account
before waiting for the new incoming data. Also, improve the checks
on successful reading and writing.
Change-Id: Iabe875fc346eb4420c72d03208d22ea861a570c6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Before: HexRgb: 0.00230 ms per iteration, HexArgb: 0.00290 ms per iteration
After: HexRgb: 0.00051 ms per iteration, HexArgb: 0.00061 ms per iteration
This showed up as a relevant optimization when profiling KIconLoader
which uses QColor::name() as part of the key -- thanks to Mark Gaiser for
the investigation and first suggestion of a solution. I have also seen
customer code writing a replacement for QColor::name() because it was
too slow to be used as a hash key.
Change-Id: I009ccdd712ea0d869d466e2c9894e0cea58f0e68
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Instead of 'true', it should be '-1'.
Change-Id: I5e8f99153da68d34b37477ef4cedbc447fba347f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
8a33077 made QUrl::resolved() follow its documentation ("If relative
is not a relative URL, this function will return relative directly.",
where relative means scheme is empty).
However there is much code out there (e.g. qtdeclarative) which relies
on QUrl::fromLocalFile("fileName.txt") to be treated as relative, so
for now, we still allow this (in Qt 5.6.x). For Qt 5.8, this commit will
be reverted.
[ChangeLog][QtCore][QUrl] [EDITORIAL: replaces 8a33077] QUrl::resolved()
no longer treats a URL with a scheme as a relative URL if it matches
this URL's scheme. For now it still treats "file:name.txt" as relative
for compatibility, but be warned that in Qt 5.8 it will no longer
consider those to be relative. Both isRelative() and RFC 3986 say that
such URLs are not relative, so starting from Qt 5.8, resolved() will
return them as is.
Change-Id: Iff01e5b470319f6c46526086d765187e2259bdf5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
At least with the eglfs platform plugin, the QBackingStore constructor
results in a null pointer access if done before creation.
Change-Id: I2e78e70700fa48499a35c55797e1b962b6e6285a
Reviewed-by: Rebecca Worledge <rebecca.worledge@theqtcompany.com>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
