The object replacement character (U+FFFC) is used to represent
inline objects such as images in rich-text. To enable this,
we have special handling of it in QTextEngine. For classes
where inline images are not supported, it will just be hidden
from the visual text, which is unexpected.
Instead of always special-casing it, we make this dependent
on whether the document layout has registered any object handlers.
If they have not, then there will be no visual representation of
the object, and it is better to show the glyph for it.
For anything based on QTextDocument, there will always be the
image handler, so U+FFFC will still have special handling there,
but for non-rich labels and plain text editors the glyph will
be shown instead.
Note that there was also a bug in QLineEdit, where the object
replacement character was always replaced by a space. This was
introduced in 2007, in a patch which replaced a !ch.isPrint()
with a check for "the most obvious non-printable characters"
to reduce the number of characters that were not shown. However,
U+FFFC is a printable character and would thus not have been
filtered by the !isPrint() condition, so I think this was a
mistake at the time. However, due to the special-casing of
the character in Qt, it would not have had any effect until
now.
This also changes the QTextLayout::cursorToXForInlineObject()
test to actually test proper inline objects, as this was
previously using a hack which depended on the inline object
code to be used even for plain QTextLayouts with no handlers
for these.
[ChangeLog][Text] The object replacement character (U+FFFC)
is now only filtered out in rich text controls, where they
represent inline objects. In other controls, its glyphs will
be shown as with other text.
Pick-to: 6.5
Fixes: QTBUG-101526
Change-Id: I7fcaf2b10918feb41589e1098016efbf79a0e62d
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Variant-selectors are special unicode symbols which are used to
modify glyph selection for the preceding character. For instance,
a regular symbol could be turned into a color emoji using VS16,
the emoji variation selector. In order for this to work, however,
the font that handles the selector has to handle the full pair of
characters, so that it can apply the correct substitution rules.
One specific example of this was on macOS, where an airplane
symbol + VS16 would match the symbol to the default UI font but
the VS16 to the emoji font. Since there string provided for the
emoji font did not have any preceding character for VS16, we just
ignored it.
To improve on this, we now detect variation selectors that have
been matched to different font engines than the preceding
character. When such a case occurs, we check if the selector font
also supports the preceding character, and if it does, we keep
the pair together and use the same font for both.
[ChangeLog][QtGui][Text] Fix some cases where a variation-selector
character would be ignored in font selection and the correct
variant of a character would thus not be selected.
Task-number: QTBUG-108799
Change-Id: I9f427e0520e652ee2f24a4f7dc3c1957251e06bd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This amends fccd419dd6.
If Harfbuzz failed on one of the items in a string and returned
zero glyphs, then we would exit the shaping loop. The mentioned
change fixed a crash related to this when the ignored character
was the only character in the string, but it occurred in a
subitem of a longer string, then we would return and fail to
lay out the rest of the string.
This popped up recently because an update to Harfbuzz has caused
it to return zero glyphs when applying the Apple emoji font to
an isolated variant character (see bug report). When we matched
the symbol to the main font and only the variant character to
the emoji font, we would get in this situation, and end up
exiting the shaping early.
[ChangeLog][QtGui][Text] Fixed a regression which would
sometimes cause text to disappear if the string contained
an unmatched variation selector character.
Pick-to: 6.4
Fixes: QTBUG-108799
Change-Id: I616ab1b2d33c2df731419c5ce06fbc578a625a32
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When Harfbuzz returns zero glyphs, this will typically be because
the character is ignored. We currently have no way to differentiate
this from actual error cases, so to avoid return the error glyph
for cases which are not really errors, we set the dontPrint flag
for this.
When we add a way to differentiate between error cases and non-error
cases later, we should revert this for the actual errors.
Pick-to: 6.4
Task-number: QTBUG-108799
Change-Id: I2a910d951b71c705fb4dd761fcfe3a942b3afa7c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When comparing a glyphIndex with a hard coded number, the number is
cast to an int, whereas the glyphIndex is an unsigned int.
That causes a compiler warning.
This patch forces the numbers to be cast to an unsigned int.
Change-Id: I8a31124c6afacfc4ecfb13caf2cb8133dad44a21
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This introduces a way to trace each entry in the glyph index
array to a specific index in the original text passed to
QTextLayout, as well as a convenience function to access
the original string from the QGlyphRun.
The index information is stored in the logClusters array internally
in Qt, but it contains the inverse information: For each
character in the output string, it contains an index into the
glyph array. In order to get the string indexes for each glyph,
which makes a lot more sense in the context of the QGlyphRun
API, we need to do a little search to construct the data.
To avoid adding unnecessary allocations, we make the new APIs
opt-in. If you do not specify anything, you will only get the
glyph indexes and glyph positions as before. However, you
can now specify exactly which parts of the layout to extract
using an optional flags parameter.
This also adds a manual test which can be very handy to
visualize QTextLayouts and how they are split into QGlyphRuns.
Fixes: QTBUG-103932
Change-Id: Ie4288fff338b9482aba0aba29fc7e1e59fa60900
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
QNX tests are run under QEMU so have the same problem as Ubuntu.
Pick-to: 6.2 6.3
Task-number: QTBUG-100928
Change-Id: Id7c7639b743062c777502e2ba8b28f9bb18deb19
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Multiple tests use qt_internal_add_resource that copies the
functionality that is already implemented inside the
qt_internal_add_test function. Simplify these test by replacing
the qt_internal_add_resource call with the new BUILTIN_TESTDATA
option.
Change-Id: I18475b817d6f87264f0de53817d6c26c5ccab4e2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
As described in 3279c8e7d7, we can't
depend on the widths of decoration to always be the same for
drawText() and equivalent drawStaticText/drawGlyphRun.
This is typically visible as an off-by-one when using the default
fonts on OpenSUSE.
Since this test was actually made to test positions of RTL glyphs,
we can just disable the decoration and simplify the text.
Fixes: QTBUG-89086
Change-Id: I139fe3e1c5e98d8b1d7e0e7c19645fd4717d1d95
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This was added by 9ff76c27b9 on
the basis that it signifies a shaping error and would later assert
or crash.
But the line is easily reachable by user code. If Harfbuzz returns
0 glyphs, it just means it is unable to shape the string, for instance
if the input string only contains default ignorables (like a ZWJ)
and does not have any appropriate glyph to use for replacement.
Qt expects there to always be at least one glyph in the output
(num_glyphs == 0 is used to indicate shaping is not yet done), so
to avoid asserts later on, we simply populate the output with a
single 0 token, which is a required entry in the font that is
reserved for representing unrepresentable characters.
This also adds a test and therefore a zero-width joiner to the test
font to reproduce the issue.
[ChangeLog][QtGui][Text] Fixed a possible crash with certain fonts
when shaping strings consisting only of control characters.
Fixes: QTBUG-89155
Pick-to: 5.15
Pick-to: 6.0
Change-Id: Ia0dd6a04844c9be90dcab6c464bebe339a3dab11
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
With the updated QEMU and toolchain, these tests now pass.
Change-Id: Icb74562a0e6422cd4564f63db991aa431e0e3119
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
It is unnecessary to create a QList container just for comparison.
Split out helpers for comparing sequence sizes and sequences from
qCompare(QList) and add a template for an array with a non-type template
parameter for the size.
One can then write something like:
const int expected[] = {10, 12,...};
QCOMPARE(QFontDatabase.pointSizes(...), expected)
Unfortunately, any commas in such an array will be misread by macro expansion
as macro argument separators, so any expected array with more than one entry
needs an extra macro expanding __VA_ARGS__.
Change-Id: Ie7c8dc20bf669bbb25f6d7f8562455f8d03968c8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
There are some slight differences between normal drawText()
and QGlyphRuns/QStaticText for decoration widths in certain
fonts. We decided to accept this and tried working around it
in the test by using ForceIntegerMetrics (since the difference
is < 0.5 pixel). This enum has been deprecated, so we move
the tests into Lancelot instead, since the idea here is to
test for regressions, not to compare the two painter commands.
Note that there is something off about decorations with
drawGlyphRuns() and drawStaticText() which is exposed
(not caused) by this, perhaps related to using a matrix
for positioning, since that was untested before.
This also takes the liberty of moving the emoji test string
from text.qps, since this was not in the statictext.qps yet.
Change-Id: Ib2d697095cbd11829cdd50b3c0268c85e9607c78
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Also blacklist tst_QRawFont::unsupportedWritingSystem() and
tst_QGlyphRun::mixedScripts() on windows for now.
Conflicts:
qmake/generators/makefile.cpp
src/corelib/itemmodels/qstringlistmodel.cpp
src/platformsupport/fontdatabases/windows/qwindowsfontengine_p.h
tests/auto/corelib/itemmodels/qstringlistmodel/tst_qstringlistmodel.cpp
tests/auto/gui/text/qglyphrun/BLACKLIST
tests/auto/gui/text/qrawfont/BLACKLIST
Task-number: QTBUG-72836
Change-Id: I10fea1493f0ae1a5708e1e48d0a4d7d6b76258b9
The flakiness was reported for macOS 10.8 a long time ago and I
am not able to reproduce it, so lets remove the workaround for
it.
Task-number: QTBUG-32690
Change-Id: I92e64065c7480b8f4c5d1d1e6cb5fdd218a70313
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
winrt still has some issues with some character sets. These
tests are skipped/blacklisted for now and will be investigated.
Task-number: QTBUG-68297
Change-Id: I898e3383a4673b6dc87815a75e705f3302a4cbba
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This autotest fails on Ubuntu 18.04 and QEMU builds.
Task-number: QTBUG-68860
Change-Id: I1907e713e8c743cf5cf8e284df516600a0c03dba
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
When calculating the width of a text for drawing decorations on top,
we use the effective advance of the whole text after it has been
through the shaper.
However, in the case of QStaticText and QGlyphRun, there is shortcut:
Since we only have the glyph indexes and position of each glyph,
we use the position + advance of the right-most glyph to find the
right-most edge of the decoration. For this, however, we use the
advance of the glyph *out of context* of the rest of the string,
because the whole idea is to avoid doing the shaping of the string
with every draw call. In some rare cases, the advance of the
right-most character, in the context of the string, is different
from the advance of the standalone glyph.
Now, one way of fixing this would be to store the width of the
text in QStaticText and QGlyphRun, but since it is a very rare
artifact which is barely visible, I have opted to just work around
it in the test instead, the workaround being to force integer
metrics so that we don't get the small 0.2 pixel error.
Task-number: QTBUG-55217
Change-Id: I8d16d52f2ef27275cabb7d3865aeeaa31617ba3d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Remove #ifdef sections for Q_OS_WINCE and wince .pro file clauses in library,
and tests.
Task-number: QTBUG-51673
Change-Id: I55f61845c3b54027c467a5c59c122e7d16955358
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This also reverts commit 018e670a26.
The change was introduced in 5.6. After the refactoring, 14960f52,
in 5.7 branch and a merge, it is not needed any more.
Conflicts:
.qmake.conf
src/corelib/io/qstandardpaths_mac.mm
src/corelib/tools/qsharedpointer_impl.h
tests/auto/widgets/itemviews/qlistview/tst_qlistview.cpp
Change-Id: If4fdff0ebf2b9b5df9f9db93ea0022d5ee3da2a4
When getting the glyph runs from a QTextLayout with multiple
lines, the glyph runs would be merged if possible, but not their
bounding rects. This was an oversight.
[ChangeLog][Text][QTextLayout] QTextLayout::glyphRuns() now returns
united bounding rects for glyph runs that are merged.
Change-Id: Ibbeaa99ecfc4e82e7965342efdae7c3c2b637343
Task-number: QTBUG-50715
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The keyword no longer has a meaning for the new CI.
Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
The sample lineedit in Qt's own font dialog shouldn't have its font
affected by stylesheets.
Not only does this hampers the ability to preview the font, it actually
overrides the font selection as that one is taken directly from the
widget.
Task-number: QTBUG-41513
Change-Id: I11d0bef8c7bf7bdae4cc08b6b9276d0fc14a75fb
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
In Qt 5.3.0 a change was added which automatically adapts Common
script to surrounding scripts in accordance with the Unicode tr#24.
This broke *a lot* of cases of font selection because the font
selection algorithm is not prepared for handling characters with
adapted scripts. We need to disable this change for now and redo it
later with patches to font selection to avoid the regressions.
[ChangeLog][Text] Fixed several regressions in font selection when
combining different writing systems in the same text.
Task-number: QTBUG-39930
Task-number: QTBUG-39860
Change-Id: Id02b5ae2403c06542ed5d81e7c4deb2e0c7d816e
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Several tests require test data to be deployed with the
application. The easiest way to achieve this on Android
is to add them to a qrc file and use the QFINDTESTDATA macro
to look up the files. This fixes several test failures
in the gui/text subdirectory for Android.
Change-Id: If944bb1fc93434a1b2d6487da829d21bd6b84e87
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Use the correct identifier for the OS X operating system.
Change-Id: I7158a6b77e5e7418bc6b0a565f003500820a346d
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
This is a flaky test on OS X 10.8, so marking it as XFAIL if it is
expected to fail.
Task-number: QTBUG-32690
Change-Id: I0665c7474bb62c4c0a70e4b93cc977e3dbf1e150
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
