If the command is quoted, it can contain anything but quotes (we do not
support escaped quotes, so single quotes have to be used). If the
command is unquoted we look for the first closing parenthesis. We used
to do this using .*?, but the greedy modifier '?' didn't seem to work,
so we now use an inverse character set.
Change-Id: I40660ce7aef6a6b6d480292d28da1b079bb161da
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead of hard-coding the SDK and deployment target.
A host build will already use the host-makespec, so now that we
always build against an SDK, these mkspecs will have the SDK and
deployment target set.
Change-Id: I2b0343ae75f7de12081bab8346307b96b3883f62
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is enabled only for -developer-builds and only for certain
compiler-version combinations that are in a whitelist.
It also requires each library, plugin or tool to declare whether it is
supposedly clean of warnings. When most targets are clean, we can
consider inverting.
Change-Id: I17b5c4e45aee5078f9788e846a45d619c144095a
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We don't want to hit the network, as a flakey network or slow server will
hang the XML parsing. We assume the XML is well formed.
Change-Id: Idc4898a925a46222954bf633a04ea9fe148c6797
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This file is now included by three types of Qt output: modules,
plugins (including QML plugins) and tools.
Change-Id: I5085f6ff37f70e9228303bf0520040adc2e2d7a5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We need to figure out where to draw the line when it comes to warning
about unknown compiler (Clang), Xcode, or SDK versions, but for now
building with Xcode 4.6 should not be an issue. We'll have to revisit
this and test with the full set of compiler/Xcode/SDKs we support
before the final release.
Change-Id: Iac3ec3a25c0f7618b2c3714657d147f17f834d97
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
At some point we want to build with C++11 support, but for now we silence
the warning.
Change-Id: I40deb0925d459eaf06e324dddc0a2e9893c57615
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
configure.prf checks if MAKEFILE_GENERATOR is set
to something it can work with. ios/default_pre.prf
unsets MAKEFILE_GENERATOR.
This breaks QtMultimedia at least. Add special case
for iOS to configure.prf and set QMAKE_MAKE to "make".
Change-Id: Ie8feaeefe4a932d735a0cd4c09e869ca1341aae5
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Defining QT_QPA_DEFAULT_PLATFORM_NAME in qplatformdefs.h is not
neccecary, as qconfig.h will already have this define written by
configure.
Change-Id: I89d9191533f6b4e6bfd5eade6cc0dced02b50f81
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Change-Id: Ic04da6063863585665c9133caba0279ba478fbb4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Ian Dean <ian@mediator-software.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
In case they provide their own main that calls UIApplicationMain.
Change-Id: Ia050277ae5cbcbf01bc57b87ec37a74db9568059
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Ideally we'd only have to do QTPLUGIN += ios, but this doesn't work as
we need to link with the force_load linker option. Even trying to build
on QTPLUGIN and then replace the -l line with what we need will fail, as
the prl logic in qmake which runs after all the prf files does not know
about the force_load option and will then fail to resolve dependencies
from the prl file.
Since we load the platform plugin using -force_load, there's no need to
generate a cpp file that does the plugin import.
The main wrapper is not a real Qt plugin, and doesn't have an import
function that we can call, so we link it manually instead of relying
on QTPLUGIN.
Change-Id: I0381a3c9ed7f8d41a4121e1fc0b7c0e210a8b832
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
As long as Qt Creator does not provide any iOS integration, and the
app bundle we create using the Makefile generator is not good enough
to deploy to a device anyways, producing Xcode projects make the most
sense.
We base the decicion on whether or not the project depends
on QtGui and has app_bundles enabled. This prevents configure
tests and other tools from having Xcode projects, but allows
examples and demos to build out of the box.
Instead of setting the generator unconditionally we unset it in
default_pre so that we can detect if the user set it manually. This
means the user won't be able to inspect the MAKEFILE_GENERATOR variable
from the pro file, but this is less of a use-case then overriding the
generator from the command line or prooject file.
Change-Id: I881cf3e29631445f83ea4ff0979f7a566e4810f5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
And use configure's -sdk argument to choose between the iphoneos and the
iphonesimulator SDK. xcodebuild -showsdks can be used to list the
available SDKs. Passing an SDK without a version postfix implies
the latest version of the SDK.
Change-Id: I881df754d522fc91aaa16ba3e39cf0c37a21a1f1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Instead we deal with any differenced by setting variables in the top
level makespecs, that are used by the common makespec configs.
Change-Id: Iae1fb5fef8c95778511ed400008731989b446f3c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
NEON detection is handled by configure's arch test, and THUMB2 is the
default for ARMv7.
Change-Id: I8ec3ce0ec6af9ad8d9509890aa1f8c87e18364d5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
We now require SDK version 4.3 or above, and armv7.
Change-Id: I4766e277a3a4a32712bf2ec27fede694e8316c95
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
There's no need to duplicate the logic for device vs simulator. The only
difference is the iPhoneOS/iPhoneSimulator name.
Change-Id: I87c57fa785279a3ee258b76fdac8317e52e7daa2
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
We treat iOS as a variant of Mac OS, so for iOS both Q_OS_MAC and
Q_OS_IOS will be defined. This matches what Apple assumes in the
header file TargetConditionals.h
Change-Id: I55cc851401b748297478e4c32e84e0f6e1fdfc28
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We can use xcode-select -print-path to get the /Developer directory.
This also removes the need for the "legacy" makespecs, which only
differ from their non-legacy counterparts in the location of the
Xcode developer directory.
Change-Id: Ia9245033a4b82cc3933226bf998f07177b60871f
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Replace them with dashes, like Xcode itself does.
Change-Id: I302425363a2eef13394025cd4a9e414048ce55ce
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
There was quite a bit of cruft left over from older Xcode version. We
now produce Xcode 3.2 compatible files, similar to what Xcode would do
when asked to upgrade one of our generated files. In particular:
- Removed refType
- Set more lastKnownFileTypes
- Renamed defaultConfigurationIsName to defaultConfigurationName
- Add runOnlyForDeploymentPostprocessing = 0 to build phases
- Don't put buildSettings directly into PBXNativeTarget
- Don't write productSettingsXML
- Don't write startupPath
- Don't write name when path is the exact same
- Write empty buildSetting lists as empty string
- Don't write empty PBXBuildFile settings
- Don't write generated/neede filenames for PBXShellScriptBuildPhase
- Use PBXFileReference instad of PBXFrameworkReference
- Prune deprecated buildSetting variables
- Remove deprecated PBXBuildStyle sections
- Resolve correct CC/CPLUSPLUS/LDPLUSPLUS
- Write IPHONEOS_DEPLOYMENT_TARGET
Change-Id: Ia2365c2623fe898878bd10636c3b85145c1cff04
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Introduce QT_OPENGL_ES_2_ANGLE_STATIC define for static builds
and modify export accordingly. Provided static instances
of gl::Current and egl::Current for Qt's single threaded
use.
Task-number: QTBUG-28196
Change-Id: Ia75699d6da103fb8dd9d5fe97c1ee51e48a74406
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Allows us to dynamically generate the command line option for iOS later,
and allows the user to override QMAKE_MACOSX_DEPLOYMENT_TARGET with the
expected effect on the command line options.
We unset PERL5LIB to ensure we get the system Perl libraries, since the
Mac OS 10.6 CI machine seems to have a broken XML::Parser::Expat from
macports/CPAN.
Change-Id: I04430c7b1daf9452d72f9a04a6b7f8d0d6926884
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Building against the local /System can cause build issues when for example
the headers have not been updated to reflect the system version. The system
headers are updated as part of installing the command line tools from within
Xcode, not as part of the system update process, so we might think we are
on 10.8, but the system headers will not reflect that, and we get build
breaks. It's preferable to always build against an SDK, so that we have
a known state for the OS X libraries and headers.
We choose the latests SDK by default, as recommended by Apple.
Change-Id: I79028217ff3a9cbe45aa4cb05ed6dd90388dee50
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Instead of setting -isysroot in both arch.test, compile.test, the various
mkspecs, and sdk.prf, we now propgate the chosen SDK as the qmake
variable QMAKE_MAC_SDK, which is then handled exclusivly in sdk.prf.
The QMAKE_MAC_SDK variable, and -sdk argument to configure, is expected
to be of the short-form name, eg macosx or iphoneos, not a full path, as
that's what Xcode also expects. We take care of translating that into
a full path for -isysroot/-syslibroot in sdk.prf, using xcodebuild as
a helper.
Change-Id: I281655b2fa5180c6e78ffdce36824e4a91447570
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
... instead of as a fallback in default_post.
it was this way in qt4, and it requires less code to be written in the
end. we are already doing it for debug/release as well.
Change-Id: I6e02849d61d14a18375cf64a5990768931ebac48
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
all tests that happen after default_post loads resolve_config can rely
on debug vs. release, static vs. shared, and staticlib vs. dll being
properly "de-conflicted".
Change-Id: Ie0b4defcd6024bd1c25f53ba7e03621052d96492
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the current approach of having "free-flying" prf files for such a core
issue is rather insane. this was noticed early on, as evidenced by the
forcible loading of debug/release/debug_and_release in default_post.
however, things remained a mess, in particular static vs. shared.
consequently, the commit merges all related feature files. the actual
config resolution is put in a separate feature file, so it can be loaded
by resolve_target if that happens to be loaded early on.
Change-Id: Ie30e7c63cabe9409a3263ca1650e323a870926f2
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The linker from the BBNDK needs -rpath-link to resolve
transitive dependencies, like on Linux.
Change-Id: I85726841ea15070e8661b9bdbffaf950fdd247e9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Qt5 requires Mac OS 10.6, so we can remove checks such as
if MAC_OS_X_VERSION_MAX_ALLOWED >= MAC_OS_X_VERSION_10_6
Change-Id: Iea21727a277291148704ecf9677ed0b68c24920f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
it differed from QMAKE_LIBS_OPENGL only for the irix/sco/unixware -cc
specs for not entirely obvious reasons. as all these specs are obsolete,
remove it.
Change-Id: I7d50ffa11ff830371ea52c9ebe25e1f1bc56b307
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
there is mightily little point in unsetting variables right before
unconditionally assigning to them.
Change-Id: I24c1814ce38bf9aab4496679b1a670f3cd55c536
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
If Qt is configured with -libdir /some/dir/outside/the/install/prefix/,
then for use absolute paths for the executables and include dirs too.
Change-Id: I5ccf62be6f93f97d934df62038fe4cd40dca9a93
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
all non-installed tools are properly registered, so they don't need the
fallback. conversely, we can assume that non-registered tools are
already installed.
this enables us to build docs in qtbase after an incremental
build+install up to qttools.
Change-Id: I95a55f6b84e01885bcf6dd656caf0dd2b679bb73
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This is the <prefix>/include directory which is independent of the
module and which only has to be used once. As everything uses QtCore,
it is enough to set it only there.
The CI system is a special case, in that it tests things before
installation. Handle that case too.
Change-Id: Idcdf9617e199b7d490cb3553cce07f1f464b3bec
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
As the Extras file can do things like append to a property (as in
QtCore for include directories), that is something that should be
done only once when the QtCore target is first defined.
Change-Id: I5163912bccfda1ff43a02eb01f67ac59e6f6b24b
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
